Benutzeranleitung / Produktwartung R972 des Produzenten Roberts Radio
Zur Seite of 32
R972 FM STEREO/AM PLL DIGIT AL PERSONAL RADIO ROBER TS Sound for Generations Operating Instructions.
1 23 4 10 9 8 7 6 5 Controls 11 12 13 14.
If you need any further advice, please call our Technical Helpline on 0181 758 0338 (Mon-Fri) 1. Power button 2. Liquid crystal display 3. Tuning control down button 4. Tuning control up button 5. Battery compartment 6. Memory button 7. Memory recall button 8.
Display a. FM Stereo indicator b. Lock indicator c. Low battery indicator d. Memory preset indicator e. Waveband indicator f. Auto power off indicator g.
If you need any further advice, please call our Technical Helpline on 0181 758 0338 (Mon-Fri) Batteries Open the battery cover (5) located on the rear of the R972 by sliding it in the direction shown by the arrow. Insert two AAA (LR03) size batteries into the compartment.
Lock Switch The Lock switch (14) is used to prevent unintentional operation of the radio. Set the Lock switch located on the right side of the radio to the up (locked) position. The Power and all other buttons will be disabled, this will prevent accidental operation when the radio is packed in a suitcase or travel bag.
If you need any further advice, please call our Technical Helpline on 0181 758 0338 (Mon-Fri) Earphones Plug the earphones supplied into the headphone socket (11) located on the right-hand side of the radio. Aerials The lead connecting earphones to the R972 acts as an FM aerial when plugged into the earphone jack.
Scan tuning Turn on the radio by pressing the Power button (1), select the FM or AM band by pressing the Waveband selection button (10). Press and hold down the Tuning up (4) or Tuning down button (3) for more than half a second to commence scan tuning.
If you need any further advice, please call our Technical Helpline on 0181 758 0338 (Mon-Fri).
Storing stations in preset memories Turn on the radio by pressing the Power button (1), select the FM or AM (MW) band by pressing the Waveband selection button (10). Tune to the desired station using Scan or manual tuning as previously described. Press the Memory button (6) the Display (2) will flash ‘M’ .
If you need any further advice, please call our Technical Helpline on 0181 758 0338 (Mon-Fri).
Storing stations in preset memories (cont.) If all the preset memory locations are full pushing the ‘M’ button will cause the display to show ‘ FUL ’ . If you still want to store a new station press the Memory button (6) , the new station will replace the station stored memory location 15 on FM or memory location 6 on AM.
If you need any further advice, please call our Technical Helpline on 0181 758 0338 (Mon-Fri).
ATS (Automatic Tuning System) The automatic tuning system on the R972 will scan the selected waveband and automatically store stations in the memory presets.
If you need any further advice, please call our Technical Helpline on 0181 758 0338 (Mon-Fri).
Memory Scan Turn on the radio and select the FM or AM band as previously described. Press and hold down the Recall button until the display shows ‘MEMO SCAN’ , the radio will scan the memory presets on the selected waveband pausing for 3-4 seconds before selecting the next preset.
If you need any further advice, please call our Technical Helpline on 0181 758 0338 (Mon-Fri).
Changing preset station order e.g. exchanging preset station 2 with preset station 6. Turn on the radio and select the FM or AM band as previously described.
If you need any further advice, please call our Technical Helpline on 0181 758 0338 (Mon-Fri).
Priority stations In addition to the normal preset memories up to three stations may be stored in priority memory for easy access. Tune in to the required station using one of the previously described methods. Press the Memory button (6) followed by the Priority button (8).
If you need any further advice, please call our Technical Helpline on 0181 758 0338 (Mon-Fri).
Mono button (operates on FM only) If the station being received is weak some hiss may be audible, to reduce the hiss press the Mono button (6) to switch to mono mode.
If you need any further advice, please call our Technical Helpline on 0181 758 0338 (Mon-Fri).
AM tuning step size In Europe and other parts or the world AM tuning steps are 9kHz, in America the AM tuning step size is 10kHz. To change the AM tuning step size from 9KHz to 10KHz proceed as follows:- Turn off the radio using the Power button (1). Turn on the radio whilst holding down the Tuning up button (4).
If you need any further advice, please call our Technical Helpline on 0181 758 0338 (Mon-Fri).
Auto power off In order to save battery power the R972 is designed to automatically switch off after 90 minutes of use, the symbol will appear in the display when the radio is switched on. To disable the auto power off function, press and hold down the power button for more than 2 seconds when turning on the radio.
If you need any further advice, please call our Technical Helpline on 0181 758 0338 (Mon-Fri).
Specifications Batteries 2 x AAA (LR03) Battery Life Approx. 22hrs using alkaline batteries Frequency coverage MW 520 - 1710kHz FM 87.5 - 108MHz Output Power 5mW Earphone Jack 3.
If you need any further advice, please call our Technical Helpline on 0181 758 0338 (Mon-Fri) Notes.
Imported by:- ROBERTS RADIO LIMITED PO BOX 130 MEXBOROUGH SOUTH YORKSHIRE S64 8YT.
Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free of charge.
ROBERTS RADIO TECHNICAL SERVICES DEPARTMENT 97-99 WORTON ROAD ISLEWORTH MIDDLESEX TW7 6EG Issue2.
Ein wichtiger Punkt beim Kauf des Geräts Roberts Radio R972 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Roberts Radio R972 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Roberts Radio R972 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Roberts Radio R972 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Roberts Radio R972 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Roberts Radio R972 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Roberts Radio R972 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Roberts Radio R972. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Roberts Radio R972 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
