Benutzeranleitung / Produktwartung M306H7T3-RPD-E des Produzenten Renesas
Zur Seite of 88
REJ10J0964-0100 ( T ) M306H7T3-RPD-E Rev.1.00 Sep. 01, 2005 User’s Manual Emulation Pod for M16C/6H Group M306H7.
1. Renesas Technology Corp . puts the maximum effort into making semicon ductor products better and more reliable, but there is al ways the possibility that trouble may occur with them . Trouble with semico nductors may lead to perso nal injury, fire or prope rty damage.
M306H7T3-RPD-E User’s Manual Preface REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 3 of 88 Preface The M306H7T3-RPD-E is an emulation pod fo r the M16C/6H Group M306H7 of 16-b it MCUs. It is used with a PC4701 emulator (e xcluding the PC4700L and PC4 701L).
M306H7T3-RPD-E User’s Manual Important REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 4 of 88 Important Before using t h is product , be sure to read this user ’ s manual careful ly . Keep this user’ s manual, and re fer to this w hen you ha ve questions a bout this product.
M306H7T3-RPD-E User’s Manual Important REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 5 of 88 Usage restrictions: This emulat or has been de veloped as a means of s upporti ng system development by users. The refore, do not use it as a device used for eq uipment-em bedded appl ications.
M306H7T3-RPD-E User’s Manual Precautions for Safety REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 6 of 88 Precautions for Safety Definitions of Signal Words In both t he user’s m anual and on the .
M306H7T3-RPD-E User’s Manual Precautions for Safety REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 7 of 88 警告警告 W ARNING Warnings for AC Power Su pply: If the attached AC power cable does not fi t the receptacl e, do not alter the AC power cable and do not plug it forcibly.
M306H7T3-RPD-E User’s Manual Precautions for Safety REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 8 of 88 注意注意 CAUTION Cautions to Be Taken for Turning On the Power: Turn ON the power of the emulator a n d user sy stem as sim ultaneously as po ssible.
M306H7T3-RPD-E User’s Manual Contents REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 9 of 88 Contents Page Preface .......................................................................................................................................
M306H7T3-RPD-E User’s Manual Contents REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 10 of 88 Page 3. Usage (How to Use the Emulator Debugger) .................................................................................... .................... 48 3.
M306H7T3-RPD-E User ’s Manual User Registration REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 11 of 88 User Registration When you ha ve purchase d the emul ator presented i n this user' s manual, p lease be sure to register it.
M306H7T3-RPD-E User’s Manual T erminology REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 12 of 88 T erminology Some specific words used i n this user's manual are defi ned as fol lows: Emulator m ain unit (Her eafter P C4701) This means a gene ric name for em ulators for M16C, 7700, 740 Fam ilies.
M306H7T3-RPD-E User’s Manual 1. Outline REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 13 of 88 1. Outline This chapter describes the package c omponen ts, the system configuration and the prepar ation for using this pro duct for the firs t time. 1.1 Package Components The M306H7T3-RPD-E package consists of th e following items.
M306H7T3-RPD-E User’s Manual 1. Outline REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 14 of 88 1.2 Other T ool Products Required for Development T o bring forward programs developm ent on the M16C/6H Group M306H7, the products listed below are necessary i n addition to those contained package above.
M306H7T3-RPD-E User’s Manual 1. Outline REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 15 of 88 1.3 System Configuration 1.3.1 System Configuration Figure 1.1 s hows a confi g uration of the PC470 1 system . Figure 1.1 Syst em configurat ion (1) Emulation pod M306H7T3-R PD-E (this pro duct) Emulation pod for the M 16C/6H Group M306 H7.
M306H7T3-RPD-E User’s Manual 1. Outline REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 16 of 88 1.3.2 Names and Function s of the PC4701 Front Panel LEDs Figure 1.
M306H7T3-RPD-E User’s Manual 1. Outline REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 17 of 88 (2) Target Status LEDs The target status LEDs indicate the tar get MCU's operating status and target board's power supply . T able 1.4 lists the d efiniti on of each target st atus LED.
M306H7T3-RPD-E User’s Manual 1. Outline REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 18 of 88 1.4 S pecifications T ables 1 .5 and 1.6 li st the speci fications of t he M306H7T3 -RPD-E.
M306H7T3-RPD-E User’s Manual 1. Outline REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 19 of 88 T able 1.6 M3 06H7T3-RPD-E specifications (2/2) Item Description 100-pin LCC socket 1 M30800T -PTC (included) + IC61-1004-05 1 (included) Connecting the u s er system (see “2.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 20 of 88 2. Setup This chapter describes the preparatio n for usi ng this pr oduct, the p rocedure fo r starting up the em ulator and h ow to cha nge settings.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 21 of 88 2.2 Installing the Emulator Debugger (M16C PC4701 Emulator Debugger) If the OS used in your host machine is Windows XP or 2000 , this installation must be executed by a user with administrator rights.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 22 of 88 2.3 Connecting the Host Machine When connecti ng the em ulator PC470 1 to a host machine, i nterface vari es dependi ng on the PC 4701 used. Figure 2. 1 shows the outline to connect each interface ca ble.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 23 of 88 2.4 Connecting the PC4701 T o connect the emulation pod to the PC4701, use the FLX120 -RPD 120-p in flexible ca ble include d with this product packa ge.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 24 of 88 2.4.2 Connecting the FLX120-RPD to the Emulation Pod Figure 2.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 25 of 88 2.4.3 PC4701 and Emulation Pod Arrangement The PC4701 a nd emulat ion pod sho uld be lai d out so th at the FLX120 -RPD becom es straight as shown i n Fig. 2.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 26 of 88 2.5 T urning ON the Power 2.5.1 Checking the Connections of the Emulator Syste m Before turning the power ON, check t he conn ection of the interface ca ble with host m achine, PC4701, emulat ion pod, and user system.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 27 of 88 2.5.3 LED Display When the Emulator S tart s Up Normally Figure 2.5 s hows front panel LED light ing status whe n the em ulator started up prop erly . Check it when starting up the emulator sy stem .
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 28 of 88 2.6 Downloading Firmware 2.6.1 When It is Necessary to Downl oad Firmware It is necessary to download the firm ware in the cases listed be low .
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 29 of 88 2.7 Self-check 2.7.1 Self-check Procedure To run the self-check of the emulator, do so as explain ed here below. While the self-check is in progress, the LEDs will change as shown in Figu re 2.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 30 of 88 Figure 2.8 Switch settings for the self-check (factory-settings) 2.7.2 If an Error is Detected in the Self-check If the self-c heck does not resul t normally (system stat us error or target status error in Figure 2.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 31 of 88 2.8 Connecting the User System Connect the e mulati on pod to the user system as shown in Figure 2.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 32 of 88 2.8.1 Connecting to a 100-pin LCC socket Figure 2.10 shows how to c onnect a 100-pi n LCC sock et (IC61-100 4-051 of Y amaichi Electro nics Co., Lt d.) on the user system t o the M30800T -PTC (included).
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 33 of 88 2.8.2 Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 1 ) Figure 2.1 1 shows how to c onnect a 1 00-pin 0.65 -mm-pitch f oot patter n on the user system to the M3T -DIRECT100S (not included), a nd here f ollowing is its pr ocedure.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 34 of 88 2.8.3 Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 2 ) Figure 2.1 2 shows ho w to connect a 100-pin 0.65-mm -pitch foot pattern on t he user sy stem t o the M3T -DUMMY100 S (not included), a nd here f ollowing is its pr ocedure.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 35 of 88 2.8.4 Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 3 ) Figure 2.1 3 shows ho w to co nnect a 100- pin 0. 65-mm -pitch foot pattern on t he user sy stem t o the M3T -FLX-100NRB (not included), a nd here f ollowing is its pr ocedure.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 36 of 88 2.9 Changing Settings This chapter describes how to set the inside of the emulator .
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 37 of 88 2.9.2 Each Setting Figure 2.15 shows the positions of each part of this product.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 38 of 88 2.9.3 Selecting Clock Supply (1) Clock Supply to the MCU Y ou can choose a cl ock suppl ied to the evaluat ion MCU by the Emulator t ab in the Init dialog bo x of the emul ator debugger .
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 39 of 88 (3) Replacing Oscillator Circuit Boards Figure 2.16 shows how to replace the oscilla tor circuit boards. For t he position of the osc illator circuit board, see Figure 2.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 40 of 88 (4) Changing the Internal Oscill ator Circuit of the Emulation Pod T o use the emulation pod at a desired frequency , build the de sired oscillator circuit on the included OSC-2 oscillator circuit board (bare board).
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 41 of 88 (5) Using the Oscillator Ci rcuit on the User System T o operate this product with an extern al clock, construct the oscillator circu it as shown in Figure 2.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 42 of 88 2.9.4 Switch Settings Here follows explanations of the switches of the emulation pod. Set the switches acco rdi ng to the user sy stem. T ables 2. 3 and 2.4 li st how to set t oggle swit ches SW1 to S W5 of the M306 H7T3-PR T board (MCU- dependent ).
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 43 of 88 T able 2.4 Switch settings of the M306H7T3- PR T (2) Signal Switch Setting Description P87 Xcout Xcin Connects pin P86/Xcout of the MC U to the user system.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 44 of 88 T able 2.6 Switch settings of the M306H7T3- PR T (4) Signal Switch Setting of jumper switches FLX FLX INT INT VCC1 JP4 Connects pin VCC1 of the MC U to the internal power supply o f pod (equipotential of VCC2).
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 45 of 88 2.9.5 Installing and Remov ing Network Re sistors for Pullup In this product, you canno t control pullup for ports P0 to P5 by pullup co ntrol registers (pullu p control register read /write a re possible).
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 46 of 88 2.9.6 Bypass Cap acitors for A/D Convert er The M306H7T3-R PD-E has t he M306H7T3- PR T board whi ch has a foot pat tern for inst alling by pass capacitors f or A/D converter near the MC U and premount ed 0.
M306H7T3-RPD-E User’s Manual 2. Setup REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 47 of 88 2.9.7 Connection Diagram of Dat a Slicer This product has on-board sockets to cha nge parts used for circ uits connected to a data slicer . The circuit and the arrangem ent of the parts use d for each ci rcuit are sh own in Figu re 2.
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 48 of 88 3. Usage (How to Use the Emulator Debugger) This chapter describ es how to start up the M16C PC4701 emulator debugg er from the High-performan ce Embedded W orkshop and how to use the main windows.
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 49 of 88 3.3 S tarting Up the Emulator Debugger When debu gging the com pleted programs, switc h the session . The sessio n can be cha nged by t he drop do wn list of t he tool bar shown below .
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 50 of 88 2) Specifying the communication interface S pecifying the communication interface (Parall el communication) - In case where the parallel communication is set up, click the radio button “Parallel” of MCU tab.
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 51 of 88 S pecifying the communication interface (LPT communication) - For selecting the LPT communication, click the radio button “L PT” of the MCU tab.
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 52 of 88 4) Specifying the clock fre quency S pecifying the clock frequency Specify the target MCU operation clock and clock dividing ratio.
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 53 of 88 (3) W o rk area tab 1) Specifying the firm ware Specifying the firmware file For the radio button of the firm ware gr oup box, be sure to click “Default”.
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 54 of 88 (6) Script tab Automatically executing a script command T o automatically execute a script command when starting up the debugger , click the “Refer .
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 55 of 88 3.3.2 Checking Connections of the Emulator System Check to see that the emulator de bugger ha s been connected correctly to the emulator .
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 56 of 88 3.4 Downloading Program Download the user pr ogram to be debugged. 1) Downloading from the work space window Downloading the progra m Download the object program you want to debug.
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 57 of 88 3.5 Program execution (1) Program execution CPU reset Resets the target MCU. Go Runs the program beginning with the curre nt PC position.
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 58 of 88 (2) Software b reak 1) Setting the software break point Execution set.
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 59 of 88 (3) Executing up to the cursor po sition (Come command) 1) Specifying.
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 60 of 88 3.6 Hardware Break Hardware break is set by event condition such as FETCH or DA T A ACCESS, etc. The program stops after executing the instruction at the set breakpoi nt (after several cycles).
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 61 of 88 (2) When FETCH is selected 1) W indow for setting a ddresses Setting the address Y ou can set eight conditions, e.g., a sp ecified address, a specified address range, etc.
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 62 of 88 (3) Whe n DA T A ACCESS is selected 1) W indow for setting th e address Setting the address Sets the address by “Address” tab.
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 63 of 88 3) Example Da ta Settings Setting a break event .
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 64 of 88 3.7 T race Window The trace window is used to show the results of real -time trace m easurements.
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 65 of 88 3) T race W indow (Bus mode display) 4) Trace Wind ow (Disassem ble m.
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 66 of 88 (2) Suspending and resuming trace m easurement 1) Suspending trace m easurement Suspend Click this toolbar button to suspend the trace measurement in progress.
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 67 of 88 (3) T race point setup window 1) T race point setup window T r ace Point Setting Window in initial state Clicking this toolbar button opens the trace point setting window .
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugge r) REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 68 of 88 3.8 RAM Monitor Window This functi on makes i t poss ible to m ake reference t o the cha nges in m e mory cont ents without im pairing the real -time performance for target program execution.
M306H7T3-RPD-E User’s Manual 4. Hardware S pecifications REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 69 of 88 4. Hardware S pecifications This chapter describes speci fications of this product . 4.1 T arget MCU S pecifications T able 4.1 lists the specifications of target MCUs which can be debugg ed with this product.
M306H7T3-RPD-E User’s Manual 4. Hardware S pecifications REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 70 of 88 4.2 Differences between the Actual MCU and Emulator Differences between the actual MCU and em ulator are shown belo w . When debugging the MCU using this produ ct, be careful about the following precautions.
M306H7T3-RPD-E User’s Manual 4. Hardware S pecifications REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 71 of 88 IMPORTANT Notes on Maskable Interrupt s: Even if a user program i s not being execut ed (includi ng when run -time debug ging is be ing perform ed), the evaluation MCU keeps running so as to control the emulation pod.
M306H7T3-RPD-E User’s Manual 4. Hardware S pecifications REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 72 of 88 4.3 Connection Diagram Figure 4.1 s hows a connectio n diagram of t he M306H7 T3-RPD-E. T his connection diagram m ainly shows the i nterface section.
M306H7T3-RPD-E User’s Manual 4. Hardware S pecifications REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 73 of 88 T able 4.3 Electrical characteristics of the 74HC4066 Standa rd values Symbol Item Condition Min. S tandard Max. Unit R ON ON resistor Vcc=4.
M306H7T3-RPD-E User’s Manual 4. Hardware S pecifications REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 74 of 88 4.4 External Dimensions 4.4.1 External Dimensions of the Emulation Pod Figure 4.2 s hows exter nal dime nsions of th e M306H7T3 -RPD-E. U n i t : m m Figure 4.
M306H7T3-RPD-E User’s Manual 4. Hardware S pecifications REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 75 of 88 4.4.2 External Dimensions of the M30800T -PT C Figure 4.3 shows external dimens ions of the converter board M30800T -PTC for a 100-pin LCC (inc luded with the M306H7T3-RPD-E).
M306H7T3-RPD-E User’s Manual 4. Hardware S pecifications REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 76 of 88 4.5 Notes on Using This Product Notes on usi ng this pr oduct are lis ted below . When debu gging the MC U using he e mulator , be careful ab out the foll owing precautions.
M306H7T3-RPD-E User’s Manual 4. Hardware S pecifications REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 77 of 88 IMPORTANT Note on Clock Supply to the MCU: A clock supplied to the evaluatio n MCU is selected by the Clock tab in the Init d ialog box of the emulator deb ugger.
M306H7T3-RPD-E User’s Manual 4. Hardware S pecifications REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 78 of 88 IMPORTANT Note on M1 (Mode Selection Input) Pin: As the evaluation MCU in this pro.
M306H7T3-RPD-E User’s Manual 4. Hardware S pecifications REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 79 of 88 IMPORTANT Note on Power Supply to the User System: Pins Vcc1 and Vcc2 are connected to the user system to observe th e voltage.
M306H7T3-RPD-E User’s Manual 5. T roubleshooting REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 80 of 88 5. T roubleshooting This chapte r describes h ow to tr oubleshoot when this product does not wor k properly. 5.1 Flowchart to Remedy the T roubles Figure 5.
M306H7T3-RPD-E User’s Manual 5. T roubleshooting REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 81 of 88 5.2 When the Emulator Debugger Does Not S tart Up Properly (1) When the LED Displ ay of the PC470 1 is Abnormal T able 5.1 LED's abnormal display and its checkpoints Error Connection to the user system Checkpoint LEDs do not light up.
M306H7T3-RPD-E User’s Manual 5. T roubleshooting REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 82 of 88 (2) Program Window is No t Displaye d at Debugger S tartup (User System Co nne cted) T able 5.
M306H7T3-RPD-E User’s Manual 5. T roubleshooting REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 83 of 88 (3) Program Window is No t Displaye d at D ebugger S tartup (User System Not Conne cted ) T able 5 .
M306H7T3-RPD-E User’s Manual 5. T roubleshooting REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 84 of 88 5.3 How to Request for Support After checking the items in "5 Troubleshooting", fill in the text file which is downloaded from the following URL, then send the information to your local distributor .
M306H5T3-RPD-E User’s Manual 6. Maintenance and Guarantee REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 85 of 88 6. Maintenance and Guarantee This chapter describes how to maintenance, repa ir provisions and how to request for repair . 6.1 User Registration When you purcha se our product, be sure register as a user.
M306H5T3-RPD-E User’s Manual 6. Maintenance and Guarantee REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 86 of 88 6.5 How to Make Request for Repair If your pro duct is fou nd faulty, f ollow the procedure below to se nd your pr oduct for repair.
Emulation Pod M306H7 for M16C/6H Group M306H7T3-RPD-E User’s Manual Publication Date: Sep. 01, 2005 Rev.1.00 Published by: Sales S trategic Planning Div . Renesas Technology Corp . Edited by: Microcomputer Tool Devel opment Department Renesas Solutions Co rp.
M306H7T3-RPD-E User's Manual.
Ein wichtiger Punkt beim Kauf des Geräts Renesas M306H7T3-RPD-E (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Renesas M306H7T3-RPD-E noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Renesas M306H7T3-RPD-E - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Renesas M306H7T3-RPD-E reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Renesas M306H7T3-RPD-E erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Renesas M306H7T3-RPD-E besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Renesas M306H7T3-RPD-E verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Renesas M306H7T3-RPD-E. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Renesas M306H7T3-RPD-E gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
