Benutzeranleitung / Produktwartung M3062PT2-EPB des Produzenten Renesas
Zur Seite of 102
REJ10J0868-0200 ( T ) M3062PT2-EPB User’s Manual Emulation Probe for M16C/ 62P and M16C/30P Grou p s Rev.2.00 Jan. 16, 2006.
1. Renesas Technology Corp. puts the m aximum effort into making semicondu ctor products better and more reliable, b ut there is always the possibility that trouble may occur with them . Trouble with semico nductors may lead to personal inju ry, fire or property damage.
M3062PT2-EPB User’s Ma nual Preface REJ10J0868-0200 Rev.2.00 January 16, 200 6 Page 3 of 102 Preface The M3062PT 2-EPB is an em ulation pro be for M16C/ 60 Series M16C 62P and M16C /30 Series M16 C30P Groups MCUs. The M3062PT2-E PB is used by connectin g to the PC7 501 emulator m ain unit.
M3062PT2-EPB User’s ma nual Important REJ10J0868-0200 Rev.2.00 January 16, 200 6 Page 4 of 102 Important Before usin g this prod uct, be sure to read thi s user’s m anual carefully. Keep this use r’s manual, an d refer to thi s when yo u have questi ons about thi s product.
M3062PT2-EPB User’s ma nual Important REJ10J0868-0200 Rev.2.00 January 16, 200 6 Usage restrictions: This emulat or has been devel oped as a m eans of supp orting system development by users. T herefore, do not use it as a de vice used for eq uipment-em bedded applicat ions.
M3062PT2-EPB User’s Manual Precautions for safety REJ10J0868-0200 Rev.2.00 January 16, 200 6 Precautions for Safety Definitions of Signal Words In both t he user’s manual a nd on the product i tse.
M3062PT2-EPB User’s Manual Precautions for safety REJ10J0868-0200 Rev.2.00 January 16, 200 6 WARNING Warnings for AC Power Su pply: If the attached AC power cable does not fi t the receptacl e, do not alter the AC power cable and do not plug it forcibly.
M3062PT2-EPB User’s Manual Precautions for safety REJ10J0868-0200 Rev.2.00 January 16, 200 6 Page 8 of 102 CAUTION Cautions to Be Taken for Turning On the Power: Turn ON/OFF the power of the emulator and use r system as sim ultaneously as possi ble.
M3062PT2-EPB User’s Ma nual Contents REJ10J0868-0200 Rev.2.00 January 16, 200 6 Contents Page Preface ...................................................................................................................................................
M3062PT2-EPB User’s Ma nual Contents REJ10J0868-0200 Rev.2.00 January 16, 200 6 Page 3. Usage (How to Use the Emulator Debugger) .........................................................................................................49 3.1 Starting Up the Emulator Debugger .
M3062PT2-EPB User’s Ma nual User Registration REJ10J0868-0200 Rev.2.00 January 16, 200 6 User Registration When you have purc hased the emulat or presented in this user's m anual, please be sure to regist er it.
M3062PT2-EPB User’s Manual Terminology REJ10J0868-0200 Rev.2.00 January 16, 200 6 Page 12 of 102 Terminology Some specific words used in this user's m anual are define d as follows: Emulator sys tem This means an emulator system built around the PC7501 emulator.
M3062PT2-EPB User’s Ma nual 1. Outline REJ10J0868-0200 Rev.2.00 January 16, 200 6 1. Outline This ch apter descri bes the pack age comp onents , the system c onfi guration, th e specifications of the emu lator functions and the operatin g environm ent.
M3062PT2-EPB User’s Ma nual 1. Outline REJ10J0868-0200 Rev.2.00 January 16, 200 6 1.2 Other Tool Products Required for Development To bring f orward program s development on an M16C/60 Series of the.
M3062PT2-EPB User’s Ma nual 1. Outline REJ10J0868-0200 Rev.2.00 January 16, 200 6 1.3 System Configuration 1.3.1 System Configuration Figure 1.2 s hows a confi guration of the M306 2PT2-EPB s ystem.
M3062PT2-EPB User’s Ma nual 1. Outline REJ10J0868-0200 Rev.2.00 January 16, 200 6 1.3.2 Names and Functio ns of the PC7501 Upper Panel LEDs Figure 1.
M3062PT2-EPB User’s Ma nual 1. Outline REJ10J0868-0200 Rev.2.00 January 16, 200 6 (2) Target Status LEDs The target status LEDs indicate operating status of the target MCU and power supply of the user system. Table 1.4 lists the definition of each target st atus LED.
M3062PT2-EPB User’s Ma nual 1. Outline REJ10J0868-0200 Rev.2.00 January 16, 200 6 Page 18 of 102 1.4 Specifications Tables 1.5 and 1.6 list t he specifications of the M3062PT 2-EPB.
M3062PT2-EPB User’s Ma nual 1. Outline REJ10J0868-0200 Rev.2.00 January 16, 200 6 Page 19 of 102 Table 1.6 Spec ifications of the M3062PT2 -EPB (2/2) For 80-pin 0. 65-mm-pi tch QFP ( PRQP0080JA-A Prev ious code: 80P6S-A): M3062PT-8 0FPB (not i ncluded) For 100-pi n LCC soc ket: M30800T-PT C (include d) + IC61-1 004-051 (included) For 100-pi n 0.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2. Setup This chapter describes the preparation f or using this product, t he procedure f or startin g up the em ulator and ho w to change settings. 2.1 Flowchart of Star ting Up the Emulator The procedure fo r starting up the emulator is shown in Figur e 2.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.2 Installing the Emulator Debugger (M16C R8C PC7501 Emulator Debugger) If the OS used in your host machin e is Windows XP or 2000 , th is installation must be executed by a user with administrator rights.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.3 Connecting the Host Machine When connectin g the emulator PC7501 to a host machine, you can choose your desired interface from LPT parallel in terface, USB interface and LAN int erface.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.4 Connecting the PC7501 Figure 2.3 shows how to connect th e PC7501 and the emulation probe.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.5 Connecting the Power Supply for the Emulator The power is supplied from AC adapter to the emulator PC7501. Here following ex plains how t o connect the AC adapter. (1) Turn OFF the power to th e PC7501.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 Page 25 of 102 2.6 Turning ON the Power 2.6.1 Checking the Connections of the Emulator Syste m Before turning the power ON, check the connection of the interface cable with host machine, PC7501, emulation probe, and user system.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.6.3 LED Display When the Emulator Starts Up No rmally Figure 2.4 shows upper pan el LED lighting status when the emulator started up properly. Check it when star ting up the emulator sy stem.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.7 Downloading Firmware 2.7.1 When It is Necessary to Download Firmware It is necessary to download the firmware in the cases listed below.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.8 Self-check 2.8.1 Self-check Procedure The self-check is a function t o check the memory etc. m ounted in the emulator. To run th e self-check of the em ulator, do so as explained here below.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.8.2 If an Error is Detected in the Self-check If the self-c heck does not result no rmally (ERR OR 1 to ERROR 4 in Figure 2.6), check t he followin g. (1) Recheck th e connection of the emulation probe and PC7501.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.9 Connecting the User System Figure 2.7 shows how to connect this product according to your user syst em.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.9.1 Connecting to an 80-pin 0.65-mm-pitch Foot Pattern Here followin g is a procedure of connecting to an 80-pin 0 .65-mm -pitch foot patte rn on the user syst em using the M30 62PT- 80FPB (not i ncluded) .
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.9.2 Connecting to a 100-pin LCC Socket Here following is a procedure of connecting to a 100-pin LCC socket (IC61- 1004-051 of Yamaichi Electro nics Co., Ltd.) on the user system using the inc luded M308 00T-PTC.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 Page 33 of 102 2.9.3 Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 1 ) Here followin g is a procedure of connecting t o a 100-pin 0.65 -mm-pitc h foot pattern on the user system usi ng the M3T-F16 0- 100NRB (n ot included).
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.9.4 Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 2 ) Here followin g is a procedure of co nnecting to a 100 -pin 0.65-mm -pitch foot pattern on the user system usi ng the M3T- DIRECT100 S (not incl uded).
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.9.5 Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 3 ) Here followin g is a procedure of co nnecting to a 100 -pin 0.65-mm -pitch foot pattern on the user system usi ng the M3T- DUMMY100S (not included).
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.9.6 Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 4 ) Here followi ng is a proce dure of con necting to a 10 0-pin 0.65 -mm-pit ch foot patter n on the user system usi ng the M3T-FL X- 100NRB (n ot included).
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.9.7 Connecting to a 100-pin 0.5-mm-pi tch Foot Pattern (Part 1) Here following is a pro cedure of conn ecting to a 100-pin 0.5-mm-p itch foot pattern on the user system using the M3T- F160- 100NSD (n ot included).
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.9.8 Connecting to a 100-pin 0.5-mm-pi tch Foot Pattern (Part 2) Here follo wing is a pr ocedure of con necting to a 1 00-pin 0.5-m m-pitch foot pattern on the use r system usi ng the M3T- 100LCC-QS D (not include d).
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.9.9 Connecting to a 100-pin 0.5-mm-pi tch Foot Pattern (Part 3) Here followin g is a procedure of c onnecting to a 100-pin 0. 5-mm-pit ch foot patte rn on the user sy stem using the M3T- FLX- 100NSD (not includ ed).
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.9.10 Connecting to a 128-pin 0.5-mm -pitch Foot Pattern Here following is a pro cedure of conn ecting to a 128-pin 0.5-mm-p itch foot pattern on the user system using the M3T- F160- 128NRD (not included).
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.10 Switch Settings 2.10.1 Switch Settings of the JP1 Set jumper switch JP1 according to a powe r s upply you use. Figure 2.18 shows the po sitions of jum per switch JP1.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.10.2 A/D Conversion Bypass Capacitors There is a f oot pattern o n the M3062PT2-E PBM board for m ounting bypass ca pacitors for t he A/D co nversion circui t near the MCU.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.10.3 Pullup of Emulation Ports Because this product emulates some I/O port s (P0 to P5, P10), you ca n not pullup ports P0 to P5 by the pu llup control registers . Install the included resist or arrays (51 k Ω ) as necessary.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.11 Selecting Clock Supply 2.11.1 Clocks You can choos e a clock sup plied to the eval uation MCU b y the Emulat or tab in the I nit dialog b ox of the em ulator debu gger.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 (2) Replacing an Oscillator Circuit Board 1. Remove the four screws of both sides of this product and lift off the upper cover (see Fig ure 2.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2. Replace the oscillator circ u it board (see Figure 2.22). Os cillator ci rcuit boar d The Figure on the left shows the oscillator circuit board. Unscrew the screw securing the oscillator circuit board.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 (3) Using the Internal O scillator Circuit Bare Board To use the emulation probe at a frequency you like, build a desi red oscillator circuit on the included OSC-2 o scillator circuit bare board.
M3062PT2-EPB User’s Ma nual 2. Setup REJ10J0868-0200 Rev.2.00 January 16, 200 6 2.11.3 Using the Oscillator Circuit on the User System To operate this product with an external clock, con struct the oscillator circuit as shown in Figure 2.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 3. Usage (How to Use the Emulator Debugger) This chapter describe s how to start up the emulator debugger from the High-per formance Embedded Workshop.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 2. Specifying the comm unication interface Specifying the communication interface (LPT communication) - For selecting the LPT communication, click the ra dio button “LPT” of the MCU tab.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 3. Executin g the self-check Executing the self-check Enable this function when you wa nt the emulator to be self- checked at startup.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 (2) Debuggi ng Information tab Specifying the compiler used and the ob ject format Specify the compiler you are using and the f ormat of the object file output by the compiler.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 (4) Automatically executing a script c ommand Automatically executing a scri pt command To automatically execute a script command when starting up the debugger, click the “Refer.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 3.1.2 MCU Setting Dialog Box MCU setting dialog box sets the information of th e user system . It will be displayed after closing the Init dialog box.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 2. Option Setting the debug options Check the box when not downloading the program to the internal flash ROM of the MCU. If this box is checked, the working efficiency (dow nloading, software break, etc.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 (2) MAP tab Specifying the emulation memory allocation Sets the memory area assigned to the emulation memory by 4KB. Up to four areas can be set.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 3.1.3 Checking Connections of the Emulator System Checking conne ctions of the emu.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 3.2 Editor (Source) Window (1) Program window Downloading the progra m Download the object program you want to debug. Select Download from “xxx.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 (3) Program execution CPU reset Resets the target MCU. Go Runs the program beginning with the curre nt PC position. Reset Go Runs the program after reset the tar get MCU.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 (4) Setting break p oints 1. Screen afte r software b reakpoint setup Breakpoint setup scre en There are three types of breakpoints as described below.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 Page 61 of 102 (5) Executing up to the cursor po s ition (Come command) 1.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 Page 62 of 102 3.3 Hardware Breakpoint Setting Window (1) Breakpo int setup dialog box 1.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 3. Opening the break ev ent setting dialog box Specifying the event type Click to select the event type you want to set. - FETCH Detects an instruction prefetch.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 (3) When DATA ACCESS is selected 1. Window for setting the address Setting the address You can set eight conditions, e. g., a specified address, a specified address range, etc.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 3. Example Da ta Settings Setting a break event A1 Address 1 : 0020E8 Data 1 : 542.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 (4) Setting the combinatorial event con dition 1. Window for setting the co mbinatorial event condition Setting the combinatorial event condition There are following four conditions t hat you can choose for the combinatorial events.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 3.4 Trace Window The trace window is used to show the results of real -time trace measurem ents. (1) Trace window 1. Trace window display Trace window The trace window is used to show the results of real-time trace measurements.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 2. Trace window (Bus display) 3. Trace window (Disassemble display) 4. Trace window (Source display) Explanation of the trace window (b us display) The following explains the displayed contents, from left to right.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 Page 69 of 102 (2) Trace point setup window 1 Trace point s etup window Trace Point Setting Win dow in initial state Clicking this toolbar button opens the t race point setting window.
M3062PT2-EPB User’s Ma nual 3. Usage (How to Use the Emulator Debugge r) REJ10J0868-0200 Rev.2.00 January 16, 200 6 3.5 RAM Monitor Window This functi on makes it possibl e to make refe rence to t he changes in memory cont ents with out impai ring the real-t ime performance fo r target progra m execution.
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev.2.00 January 16, 200 6 4. Hardware Specifications This chapter describes speci fications of thi s product. 4.1 Target MCU Specifications Table 4.1 lists the specification s of target MCUs which can be debugg ed with this product.
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev.2.00 January 16, 200 6 4.2 Access Timing Because this product emulates som e port s, access timings are different from those of t he actual MCUs. Chapters 4.2.1 and 4.2.2 describe the access ti ming using t his product.
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev.2.00 January 16, 200 6 Figure 4.1 M emory expa nsion mode a nd microprocess or mode (3 wait, accessing ext ernal area) Re a .
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev.2.00 January 16, 200 6 (2) Multiplex Bus Timing Table 4.3 and Figure 4.2 show the bu s timing in m emory expansion mode an d microprocessor m ode (2-wait, accessing external area, using multiplex bus).
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev.2.00 January 16, 200 6 Figure 4.2 Memory expansion mode and micropro cessor mode (2 wait, accessing external area, using mul.
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev.2.00 January 16, 200 6 (3) Timing Requirements Tables 4.4 and Figure 4. 3 list the tim ing requirem ents in m emory expansio n mode and m icroprocessor m ode.. Table 4.4 Tim ing requirem ents Actual MCU [ns] This product [ns] Symbol Item Min.
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev.2.00 January 16, 200 6 4.2.2 Operation Timing of Memory Expansi on Mode and Microproce ssor Mode (Vcc1=Vcc2=3V) (1) Separate Bus Timing Table 4.5 and Figure 4.4 show the bus tim ing in memory expa nsion mode and m icropr ocessor m ode (3 wait, accessing external area).
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev.2.00 January 16, 200 6 Figure 4.4 M emory expa nsion mode a nd microprocess or mode (3 wait, accessing ext ernal area) Read .
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev.2.00 January 16, 200 6 (2) Multiplex Bus Timing Table 4.6 and Figure 4.5 show the bus tim ing in memory expa nsion mode and m icropr ocessor m ode (2 wait, accessing external area and using multiplex bus).
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev.2.00 January 16, 200 6 Figure 4.5 Memory expansion mode and micropro cessor mode (2 wait, accessing external area and using .
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev.2.00 January 16, 200 6 (3) Timing Requirements Table 4.7 and Figures 4. 6 show tim ing requirem ents in mem ory expansion m ode and m icroprocessor m ode. Table 4.7 Tim ing requirem ents Actual MCU [ns] This product [ns] Symbol Item Min.
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev.2.00 January 16, 200 6 4.3 Differences between the Actual MCU and Emulator Differences be tween the actual MCU and em ulator are show n below. When debuggin g the MCU usin g this product , be careful about the following precautions.
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev.2.00 January 16, 200 6 Page 83 of 102 IMPORTANT Note on Voltage Detect Circuit: With this pro duct, as the powe r voltage cannot be change after powering on the user system, the voltage detect circuit (voltage down detect interrup t, voltage down det ect reset, etc.
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev.2.00 January 16, 200 6 Page 84 of 102 IMPORTANT Notes on Pullup Control: Because t his product emulates some I/O ports (.
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev.2.00 January 16, 200 6 4.4 Connection Diagrams Figure 4.7 shows a connection d iagram of the M3062PT2-EPB. Th is connection diagram mainly show th e circuit to be connected to the user system.
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev. 2.00 Januar y 16, 2006 Table 4.8 Electrical charact eristics of the 74HC4066 Condition Standa rd values Unit Symbol Item VCC Min. Standar d Max. R ON ON resistor 4.5V - 96 170 Δ R ON ON resistor difference 4.
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev. 2.00 Januar y 16, 2006 4.5 External Dimensions 4.5.1 External Dimensions of the Emulation Probe Figure 4.8 s hows exter nal dimensions of the M3 062PT2-EPB . Figure 4.8 Ext ernal dimensi ons of the emulation pro be 512 100.
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev. 2.00 Januar y 16, 2006 4.5.2 External Dimensions of the M30800T-PT C Figure 4.9 s hows exter nal dimensions of the convert er board M 30800T-PTC for a 100-pin LCC (included with the M30 62PT2- EPB).
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev. 2.00 Januar y 16, 2006 4.6 Notes on Using This Product Notes on usi ng this prod uct are listed bel ow. When deb ugging the M CU using he emul ator, be careful about the followi ng precautions.
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev. 2.00 Januar y 16, 2006 IMPORTANT Note on Clock Supply to the MCU: A clock suppl ied to the evalu ation MCU is selected by the Em ulator tab in the Init dialog box of the emulator debugger.
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev. 2.00 Januar y 16, 2006 IMPORTANT Note on Access Prohibited Area: You cannot use internally reserved ar eas. Write signals to the areas will be igno red, and values read will be undefine d.
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev. 2.00 Januar y 16, 2006 IMPORTANT Notes on Internal Flash ROM of the MCU: In single-c hip mode and memory expa nsion modes, this prod uct downloa ds a user prog ram to the flas h ROM of an MCU.
M3062PT2-EPB User’s Manual 4. Hardware Specifications REJ10J0868-0200 Rev. 2.00 Januar y 16, 2006 IMPORTANT Notes on Debugging in CP U Rewrite Mode: When you deb ug an M16C/6 0 Series MCUs i n CPU rewrit e mode, do not change t he block 0 a rea (FF000h-- FFFFFh) of the flash memory .
M3062PT2-EPB User’s Manual 5. Troubleshooting REJ10J0868-0200 Rev. 2.00 Januar y 16, 2006 5. Troubleshooting This chapte r describes h ow to troubl eshoot whe n this prod uct does not work properly .
M3062PT2-EPB User’s Manual 5. Troubleshooting REJ10J0868-0200 Rev. 2.00 Januar y 16, 2006 5.2 When the Emulator Debugger D oes Not Start Up Properly (1) When the LEDs of the PC7501 Do Not Display Normally Table 5.1 Err ors LEDs show and their check points Error Connection to the user system Checkpoint LEDs do not light up.
M3062PT2-EPB User’s Manual 5. Troubleshooting REJ10J0868-0200 Rev. 2.00 Januar y 16, 2006 (2) MCU Setting Dialog Box Does Not Appear at Emulator Debugger Startup Table 5.2 Chec kpoints of e rrors at debu gger startup Error Checkpoint Communi cation error occur red.
M3062PT2-EPB User’s Manual 5. Troubleshooting REJ10J0868-0200 Rev. 2.00 Januar y 16, 2006 (3) Errors Occu r at Em ulator Debugger Startup Table 5.4 Chec kpoints of e rrors at debu gger startup Error Checkpoint Target MCU is uncontroll able. (1) Check that the NQPAC K etc.
M3062PT2-EPB User’s Manual 5. Troubleshooting REJ10J0868-0200 Rev. 2.00 Januar y 16, 2006 5.3 How to Request for Support After checking the items in "5 Troubleshoo ti ng", fill in the text file wh ich is downloaded from the fo llowing URL, then send the information to your local distributor.
M3062PT2-EPB User’s Manual 6. Maintenance and Guarantee REJ10J0868-0200 Rev. 2.00 Januar y 16, 2006 6. Maintenance and Guarantee This chapter describes how to maintenance, repa ir provisions and how to request for repair. 6.1 User Registration When you purchase our product, be sure register as a user.
M3062PT2-EPB User’s Manual 6. Maintenance and Guarantee REJ10J0868-0200 Rev. 2.00 Januar y 16, 2006 (3) Expiration of the repair period When a period of one y ear elapses after the model was dr opped from production, repairing prod ucts of the m odel may become im possible.
Emulation Probe for M16C/62P and M16C/30P Groups User’s Ma nual M3062PT2-EPB Publication Date: Jan. 16, 2006 Rev.2.00 Published by: Sales Strategic Planning Div. Renesas Technology Corp . Edited by: Microcomputer Tool Development Department Renesas Solutions Co rp.
M3062PT2-EPB User’s Manual.
Ein wichtiger Punkt beim Kauf des Geräts Renesas M3062PT2-EPB (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Renesas M3062PT2-EPB noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Renesas M3062PT2-EPB - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Renesas M3062PT2-EPB reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Renesas M3062PT2-EPB erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Renesas M3062PT2-EPB besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Renesas M3062PT2-EPB verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Renesas M3062PT2-EPB. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Renesas M3062PT2-EPB gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
