Benutzeranleitung / Produktwartung HS1650ECN61H des Produzenten Renesas
Zur Seite of 25
2003.10.6 H8SX/1650 Series E6000H TFP-120 User System Interface Boa rd User’s Manual HS1650ECN61H Rev.3. 00.
Cautions Keep safety firs t in your circ uit designs ! 1. Renesas Technology Corp. pu ts the maximum ef fort into making s emiconductor products better and more reliable, but t here is always the possi bility that trouble may occur with the m. Trouble with se miconducto rs may lead to pers onal injury, fire or prope rty damage.
I IMPORTANT INFORMATION READ FIRST • READ this user's manual before using this user system interface board. • KEEP the user's manual handy for future reference. Do not atte mpt to use the user syste m interfa ce board until yo u fully understand its mec ha ni s m.
II LIMITED WARRANTY Renesas warrants its user s y stem interface bo ards to be manufactu red in accordance with published specifications and free from d efects in materia l and/or workmanship. Renesas will repair or replace any user sy stem interface boards determined to be defective in material and/or workmanship.
III State Law : Some states do not allo w the exclusio n or li mitation of imp lied warranties or liabilit y for incidental or consequential da mages, so the above limitatio n or exclusion may not apply to you. Thi s warr an t y give s yo u spec i fic lega l ri ght s, a nd you ma y ha ve othe r rig hts wh ic h ma y vary fro m state to state.
IV SAFETY PAGE READ FIRST • READ this user's manual before using this user system interface board. • KEEP the user's manual handy for future reference. Do not atte mpt to use the user syste m interfa ce board until yo u fully understand its mec ha ni s m.
V W ARNING Observe the pr ecautions listed b elow. Failure to do so will result in a FIRE H AZARD and will damage the user system and the emul ator product or will r esult in PERSONAL INJURY. The USER PROGRA M will be LOST. 1. Do not repair or remodel the emul ator product by yourself for elect ric shock pre vention and quality assurance.
i Preface The HS1650ECN61H is a us er sys tem in terface board that conn ects a user s ystem for th e H8SX/1650 Seri es TFP-120 packag e to the H8S X/1650 Series E6000H emu lator (HS1650EPH60H).
ii Contents Section 1 Configuration ..................................................................................... 1 Section 2 Connection Procedures ...................................................................... 3 2.1 Connectin g User Sy stem Interface Board to User Sy stem .
1 Section 1 Configuration Figure 1 and table 1 s how the conf iguration an d compon ents of th e user sy stem interf ace board for the TFP-120 pack age.
2 CAUTION Use an IC149-120- 043-B51 socket (manuf actured by YAMAICH I ELECTRONICS Co., Lt d.) for the TFP- 120 package IC socket on the user syst em. Table 1 HS1650ECN61H C omponents No.
3 Section 2 Connection Procedures 2.1 Connecting User System Interface Board to User System W ARNING Always switch OFF the user syst em and the emulator product before the USER SYSTEM INTERFACE BOARD is connected to or removed from any part . Before connecting, make sure that pin 1 on bot h sides are correctly aligned.
4 2.1.3 Installing IC So cket CAUTION Check the location of pin 1 before inserting. After checking the location of pin 1 on the user system interface board and pin 1 on the IC socket connector, align .
5 Board User system Pin 1 Screws (M2 × 12 mm) with flat washers (for fastening cable head) IC socket (IC149-120-043-B51 manufactured by YAMAICHI ELECTRONICS Co.
6 2.2 Exchanging th e Spacer of the EV-Ch ip Board While the user system interface board is connected to the user system, be careful not to apply load. Exchange the spacer (2.6MP × 10 mm) of the EV-chip board with another spacer (2.6MP × 25 mm) provided for the user system interface board.
7 2.3 Connecting User System Interface Board to EV-Chip Board W ARNING Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST.
8 Connector No. UCN1 UCN1 UCN2 UCN2 Board EV-Chip Board Connector No. Board Connector No. EV-chip board Figure 4 Connecting User System Interface Board to EV-Chip Board.
9 2.4 Recomm ended Dimensions for User System Mount Pad (Footprint) Figure 5 sh ow s th e recom m en ded dim ension s f or th e m ount pad (footprint) for the user sy st em with an IC s ocket for a TFP- 120 package (IC149- 120-043- B51: ma nuf actured by YAMAICHI ELECTRONICS C o.
10 2.5 Dimensions for EV-Chip Board and User System Interface Board The dimen sions f or the EV-chi p board and the us er sys tem in terface board are show n in fig ure 6. Unit: mm Tolerance: ±0.5 mm 140.0 100.0 EV-chip board User system interface board 102.
11 2.6 Resulting Dimensions after Connecting User System Interface Board The resulting dim ens ions, after con necting th e user sy stem interface board to th e user sy stem , are shown in figure 7 . Unit: mm Tolerance: ±1.0 mm 35.6 16.0 57.6 User system EV-chip board IC socket (IC149-120-043-B51 manufactured by YAMAICHI ELECTRONICS Co.
12 Section 3 Verifying Oper ation 1. Turn on the em ul ator according to the procedu res described in th e H8SX/1650 Series E6000H Emu lator User' s Man ual (HS1650EPH 60HE).
13 To use the crystal oscillator m ounted on the EV-ch ip board Install the crys tal oscillator into the crystal oscillator terminals on the EV- chip board.
14 Section 4 Notice 1. Before connecting any parts or cables, make sure that pin 1 on the both s ides are correctly aligned. 2. Do not apply excessive force to the user system interface board while it is connected to the user sy stem.
H8SX/1650 Series E6000H TFP-120 User System Interface Board User's Man ual Publication Date: Rev.3.00, October 6, 2003 Published by: Sales Strategic Planning Div. Renesas Technology Corp. Edited by: Technical Documentation & Information Department Renesas Kodaira Semiconductor Co.
H8SX/16 50 Series E6 000H TFP-120 User Sy stem Inte rface B oard User’s Ma nual REJ10B0048-0300H.
Ein wichtiger Punkt beim Kauf des Geräts Renesas HS1650ECN61H (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Renesas HS1650ECN61H noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Renesas HS1650ECN61H - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Renesas HS1650ECN61H reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Renesas HS1650ECN61H erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Renesas HS1650ECN61H besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Renesas HS1650ECN61H verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Renesas HS1650ECN61H. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Renesas HS1650ECN61H gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
