Benutzeranleitung / Produktwartung Emulation Probe M306V8T-EPB des Produzenten Renesas
Zur Seite of 90
REJ10J0777-0100 ( T ) M306V8T-EPB Rev.1.00 Aug. 1, 2005 User’s Manual Emulation Probe for M16C/60 Series M16C/6V Grou p M306V8.
1. Renesas Technology Corp . puts the maximum effort into making semicon ductor products better and more reliable, but there is al ways the possibility that trouble may occur with them . Trouble with semico nductors may lead to perso nal injury, fire or prope rty damage.
M306V8T-EPB User’s M anual Preface REJ10J0777-0100 Re v.1.00 2005.08.01 Page 3 of 90 Preface The M306V8T -EPB is an em ulation pro be for M16C/ 60 Series M1 6C/6V Gro up M306V8. T he M306V 8T-EPB is use d by connecting to the PC7501 emulator main unit.
M306V8T-EPB User’s m anual Important REJ10J0777-0100 Re v.1.00 2005.08.01 Page 4 of 90 Important Before usin g this prod uct, be su re to read t his user’s manual careful ly. Keep this use r’s manual , and refer t o this wh en you have questions ab out this pr oduct.
M306V8T-EPB User’s m anual Important REJ10J0777-0100 Re v.1.00 2005.08.01 Page 5 of 90 Usage restrictions: This emulat or has been de veloped as a means of s upporti ng system development by users. The refore, do not use it as a device used for eq uipment-em bedded appl ications.
M306V8T-EPB User’s Man ual Precautions for safety REJ10J0777-0100 Re v.1.00 2005.08.01 Page 6 of 90 Precautions for Safety Definitions of Signal Words In both t he user’s manual a nd on t he pro d.
M306V8T-EPB User’s Man ual Precautions for safety REJ10J0777-0100 Re v.1.00 2005.08.01 Page 7 of 90 WARNING Warnings for AC Power Su pply: If the attached AC power cable does not fi t the receptacl e, do not alter the AC power cable and do not pl ug it forcibly.
M306V8T-EPB User’s Man ual Precautions for safety REJ10J0777-0100 Re v.1.00 2005.08.01 Page 8 of 90 CAUTION Cautions to Be Taken for Turning On the Power: Turn ON/OFF the power of the emulator and use r system as si multaneously as possible.
M306V8T-EPB User’s M anual Contents REJ10J0777-0100 Re v.1.00 2005.08.01 Page 9 of 90 Contents Page Preface ........................................................................................................................ ....................
M306V8T-EPB User’s M anual Contents REJ10J0777-0100 Re v.1.00 2005.08.01 Page 10 of 90 Page 3. Usage (How to Use the Emulator Debugger) .................................................................................... .....................43 3.1 Starting Up the Emulator Debugger .
M306V8T-EPB User’s M anual User Registration REJ10J0777-0100 Re v.1.00 2005.08.01 Page 11 of 90 User Registration When you have purchased the emulator presented in this user's manua l, please be sure to register it.
M306V8T-EPB User’s M anual Terminology REJ10J0777-0100 Re v.1.00 2005.08.01 Page 12 of 90 Terminology Some specific words used i n this user's manual are defi ned as fol lows: Emulator syst em This means an emulator system built around the PC7501 emulator.
M306V8T-EPB User’s M anual 1. Outline REJ10J0777-0100 Re v.1.00 2005.08.01 Page 13 of 90 1. Outline This ch apter descr ibes the pac kage co mponen ts, the sys tem conf i guration, the specifications of the emu lator functions and th e operating e nvironm ent.
M306V8T-EPB User’s M anual 1. Outline REJ10J0777-0100 Re v.1.00 2005.08.01 Page 14 of 90 1.2 Other Tool Products Required for Development To bring f orward pr ograms devel opment on an M 16C/60 Se ries of t he M16C/6 V Group M306V8 M CUs, the products listed below are necessary in addition to those con tained package above.
M306V8T-EPB User’s M anual 1. Outline REJ10J0777-0100 Re v.1.00 2005.08.01 Page 15 of 90 1.3 System Configuration 1.3.1 System Configuration Figure 1.
M306V8T-EPB User’s M anual 1. Outline REJ10J0777-0100 Re v.1.00 2005.08.01 Page 16 of 90 1.3.2 Names and Function s of the PC7501 Upper Panel LEDs Figure 1.
M306V8T-EPB User’s M anual 1. Outline REJ10J0777-0100 Re v.1.00 2005.08.01 Page 17 of 90 (2) Target Status LEDs The target status LEDs indicate operating status of the target MCU and power supply of the user system. Table 1.4 lists the definition of each target status LED.
M306V8T-EPB User’s M anual 1. Outline REJ10J0777-0100 Re v.1.00 2005.08.01 Page 18 of 90 1.4 Specifications Tables 1.5 lists the specifica tions of the M306V8T-EPB.
M306V8T-EPB User’s M anual 1. Outline REJ10J0777-0100 Re v.1.00 2005.08.01 Page 19 of 90 1.5 Operating Environment Be sure to use this emulator with the operatin g environmental of the emulator and ho st machine listed in Tables 1.6 and 1.7. Table 1.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 Re v.1.00 2005.08.01 Page 20 of 90 2. Setup This chapter describes the preparatio n for usi ng this pr oduct, the p rocedure f or startin g up the em ulator and how to cha nge settings. 2.1 Flowchart of Star ting Up the Emulator The procedure fo r starting up the emulator is shown in Figure 2.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 Re v.1.00 2005.08.01 Page 21 of 90 2.2 Installing the Emulator Debugger (Renesas Debugger Package for M16C) If the OS used in your host mach ine is Windows XP or 2 000, th is installation must be executed b y a user with administrator rights.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 R e v.1.00 2005.08.01 Page 22 of 90 2.3 Connecting the Host Machine When connectin g the em ulator PC7501 to a host machine, you can choose yo ur desired interface from LPT parallel interface, USB interface and LAN int erface.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 Re v.1.00 2005.08.01 Page 23 of 90 2.4 Connecting the PC7501 Figure 2.3 shows how to conn ect the PC7501 and the emulation probe. (1) Slide the uppe r cover of the M306V8T-EPB to the M306V8T- PTC side.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 Re v.1.00 2005.08.01 Page 24 of 90 2.5 Connecting the Power Supply for the Emulator The power is supplied from AC adapter to the emulator PC7501. Here following ex plains how t o connect the AC adapter.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 R e v.1.00 2005.08.01 Page 25 of 90 2.6 Turning ON the Power 2.6.1 Checking the Connections of the Emulator Syste m Before turning the power ON, check the connection of the interface cable with host machine, PC7501, emulation probe, a nd user system.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 R e v.1.00 2005.08.01 Page 26 of 90 2.6.3 LED Display When the Emulator Starts Up No rmally Figure 2.4 shows upper pan el LED lighting status when the emulator started up properly. Check it when star ting up the emulator sy stem .
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 R e v.1.00 2005.08.01 Page 27 of 90 2.7 Downloading Firmware 2.7.1 When It is Necessary to Downl oad Firmware It is necessary to download the firmware in the cases listed below.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 R e v.1.00 2005.08.01 Page 28 of 90 2.8 Self-check 2.8.1 Self-check Procedure To run the self-check of the emulator, do so as explain ed here below. While the self-check is in progress, the LEDs will change as shown in Fi gure 2.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 Re v.1.00 2005.08.01 Page 29 of 90 2.8.2 If an Error is Detected in the Self-check If the self-c heck does not resul t normall y (ERROR 1 to ER ROR 4 in Fi gure 2.6), check the following. (1) Recheck the con nection of the emulation prob e and PC7501.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 Re v.1.00 2005.08.01 Page 30 of 90 2.9 Connecting the User System Figure 2.7 shows how to connect this product according to your user syst em.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 Re v.1.00 2005.08.01 Page 31 of 90 2.9.1 Connecting the User System When connect ing the em ulation pro be to a 116- pin 0.65- mm-pitch fo ot patter n on the use r system, f ollow the pr ocedures below.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 Re v.1.00 2005.08.01 Page 32 of 90 2.10 Switch Settings 2. 1 0. 1 Setting Switches of E mulation P robe Set the switches of the emulation probe accord ing to the cond ition. Figure 2.9 shows the positions of the switches of the M306V8T-EPB.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 Re v.1.00 2005.08.01 Page 33 of 90 (1) Circuits for JP2, JP3, SW1 t o SW5 o n the M306 V8T-EPB boa rd, OSD resistor, capaci tors, etc. Figure 2.10 s hows these ci rcuits. Figure 2.1 0 Circuits for JP2, J P3, SW1 t o SW5, a nd OSD TRGT R14 470ohm J4 RCA SW5 R15 1Mohm C16 0.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 Re v.1.00 2005.08.01 Page 34 of 90 (1) Setting JP 2, JP3, S W1 to SW5 on the M306 V8T-EPB Tables 2.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 Re v.1.00 2005.08.01 Page 35 of 90 Table 2.3 Switch settings of the M306V8T-EPB (JP2, JP3, SW1 to SW5) (2/2) Switch Switch name Setting Descript ion ●TRGT EPB SW3 P103/CAP (Factory-setting) Connects pin P 103/CAP of t he evaluatio n MCU to the user system .
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 Re v.1.00 2005.08.01 Page 36 of 90 2.10.2 Writing Data to the OSDROM This product is not ab le to write data into the OSDROM (interna l resources of the evaluation MCU). Remove the evalu ation MCU of IC3 from the IC socket and write data to the OSDROM using the dedicated programmer.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 R e v.1.00 2005.08.01 Page 37 of 90 2.10.3 Pullup of Emulation Ports Because this product emulates some I/O port s (P0 to P5, P10), you ca n not pullup ports P0 to P5 by the pu llup control registers .
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 Re v.1.00 2005.08.01 Page 38 of 90 2.11 Selecting Clock Supply 2.11.1 Clocks You can cho ose a clock supplied to t he evaluation MCU by t he Emulator t ab in the I nit dialog box of t he emulator debugger.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 Re v.1.00 2005.08.01 Page 39 of 90 (2) Replacing an Oscillator Circuit Board 1. Remove the four screws of both sides of this produc t and lift off the upper cov er (see Figure 2.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 Re v.1.00 2005.08.01 Page 40 of 90 1. Replace the oscillator circ u it board (see Fi gure 2.14). The oscillator circuit board of the PC7501 is in th e lower right corner of the board. Unscrew the screw securing the oscillator circuit board.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 Re v.1.00 2005.08.01 Page 41 of 90 (3) Using the Internal Os cillator Circuit Bare Board To use the emulation probe at a frequency you like, build a desi red oscillator circuit on the included OSC-2 o scillator circuit bare board.
M306V8T-EPB User’s M anual 2. Setup REJ10J0777-0100 Re v.1.00 2005.08.01 Page 42 of 90 2.11.3 Using the Oscillator Circuit on the User System To operate this product with an extern al clock, construct the oscillator circuit as shown in Figure 2.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 R e v.1.00 2005.08.01 Page 43 of 90 3. Usage (How to Use the Emulator Debugger) This chapter describe s how to start up the emulator de bugg er from the High-per formance Embedded Workshop.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 44 of 90 2. Specifying the comm unication interface Specifying the communication interface (LPT communication) - For selecting the LPT communication, click the radio button “LPT” of the MCU tab.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 45 of 90 3. Executin g the self-chec k Executing the self-check Enable this function when you wa nt the emulator to be self- checked at startup.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 46 of 90 (2) Debugging Inform ation tab Specifying the compiler used and the o bject format Specify the compiler you are using and the for mat of the object file output by the compiler.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 47 of 90 (4) Automatically executing a script c ommand Automatically executing a script command To automatically execute a script command when starting up the debugger, click the “Ref er.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 R e v.1.00 2005.08.01 Page 48 of 90 3.1.2 MCU Setting Dialog Box MCU setting dialog box sets the information of th e user system . It will be displayed after closing the Init dialog box.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 49 of 90 2. Option Setting the debug options Check the box when not downloading the program to the internal flash ROM of the MCU. If this box is checked, the working efficiency (dow nloading, software break, etc.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 50 of 90 (2) MAP tab Specifying the emulation memory allocation Sets the memory area assigned to the emulation memory by 4KB. Up to four areas can be set.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 51 of 90 3.1.3 Checking Connections of the Emulator System Checking conne ctions of t.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 52 of 90 3.2 Editor (Source) Window (1) Program window Editor (Source) window The editor (source) window is a window that always shows the content of the source file corresponding to the current position of the program counter.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 53 of 90 (3) Setting break p oints 1. Screen afte r software b reakpoint setu p Breakpoint setup screen There are three types of breakpoints as described below.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 54 of 90 (4) Executing up to the cursor po sition (Come command) 1. Specifying the Com e command Setup procedure for executing CO ME command (1) Click the line in t he progr am dis play ar ea at whi ch you want the program to execute.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 55 of 90 3.3 Hardware Breakpoint Setting Window (1) Breakpo int setup dialog box 1. Opening the hardware breakp oint setup dial og box Hardware Break Poi nt Clicking this button opens th e hardware breakpoint setup dialog box.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 56 of 90 3. Opening the break ev ent setting dialog box Specifying the event type Click to select the event type you want to set. - FETCH Detects an instruction prefetch.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 57 of 90 (3) When DATA ACCESS is selected 1. Window for setting the address Setting the address You can set eight conditions, e. g., a specified address, a specified address range, etc.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 58 of 90 3. Example Da ta Settings Setting a break event A1 Address 1 : 0020E8 Data 1.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 59 of 90 (4) Setting the combinatorial event con dition 1.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 60 of 90 3.4 Trace Window The trace window is used to show the results of real -time trace m easurements.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 61 of 90 2. Trace window (Bus display) 3. Trace window (Disassemble display) 4. Trace window (Source display) Explanation of the trace window (b us display) The following explains the displayed contents, from left to right.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 62 of 90 (2) Trace point setup window 1 Trace point s etup window Trace Point Setting Win dow in initial state Clicking this toolbar button opens the t race point setting window.
M306V8T-EPB User’s M anual 3. Usage (How to Use the Emulator Debugger) REJ10J0777-0100 Re v.1.00 2005.08.01 Page 63 of 90 3.5 RAM Monitor Window This functi on makes i t poss ible to m ake reference t o the cha nges in m emory cont ents with out im pairing the real-time performance fo r target progra m execution.
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 64 of 90 4. Hardware Specifications This chapter describes speci fications of this product . 4.1 Target MCU Specifications Table 4.1 lists the specification s of target MCUs which can b e debugged with this product.
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 65 of 90 4.2 Access Timing Because this product emulates some ports, ac cess timings are di ffere nt from those of the actua l MCUs. Chapter 4.2.1 descri bes the access timing using this product.
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 66 of 90 Figure 4.1 Me mory expa nsion m ode and micro processor mode (3-wait, ac cessing externa l ar.
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 67 of 90 (2) Multiplex Bus Timing Table 4.3 and Figure 4.2 show the bu s timing in m emory expansion mode an d microprocessor mode (2-wait, accessing external area, using multiplex bus).
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 68 of 90 Figure 4.2 Memory expansion mode and micropro cessor mode (2-wait, accessing external area, u.
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 69 of 90 (3) Timing Requirements Tables 4.4 and Figure 4. 3 list the tim ing requi rements. Table 4.4 Tim ing requirem ents Actual MCU [ns] This product [ns] Symbol Item Min.
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 70 of 90 4.3 Differences between the Actual MCU and Emulator Differences be tween the actu al MCU and e mulator are s hown bel ow. When de bugging t he MCU using t his product , be careful about the following precautions.
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 71 of 90 IMPORTANT Notes on Reset Vector Area: Mem ory in the emulator main unit is al ways selected as a reset vector area (FF FFCh--FFFFFh) i n order to operate the eva luation MC U in the emul ator-dedicated m ode .
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 72 of 90 IMPORTANT Notes on Pullup Control: Because t his product emulates some I/O ports (P0 t o P5 , P10), you ca n not pullup port s P0 to P5 by the pullup control register s, Install the included resi stor arrays (51 k Ω ) as necessary.
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 73 of 90 4.4 Connection Diagrams Figure 4.4 shows a connect ion diagram of the M 306V8T-EPB. This connecti on diagram mainly show the circ uit to be connected to the user system.
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 74 of 90 Table 4.5 Electrical charact eristics of the 74HC4066 Condition Standa rd values Unit Symbol Item VCC Min. Standard Max. R ON ON resistor 4.5V - 96 170 Δ R ON ON resistor difference 4.
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 75 of 90 4.5 External Dimensions 4.5.1 External Dimensions of the Emulation Probe Figure 4.5 s hows exter nal dime nsions of th e M306V8T-E PB. Figure 4.
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 76 of 90 4.5.2 External Dimensions of the M306V 8T-PTC Figure 4.6 s hows exter nal dime nsions of th e converter board M306 V8T-PTC f or a 116-pin LC C (inclu ded with t he M306V8T - EPB).
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 77 of 90 4.6 Notes on Using This Product Notes on usi ng this pr oduct are list ed below. Whe n debuggi ng the MCU usi ng he emulator , be careful ab out the followi ng precautions.
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 78 of 90 IMPORTANT Note on Clock Supply to the MCU: A clock suppl ied to the evalu ation MCU i s selected by t he Emulat or tab in the I nit dialog b ox of the em ulator debugger.
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 79 of 90 IMPORTANT Note on Breaks: The area displa ying break points in t he program window of the emulator d ebugger shows the followi ng breaks.
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 80 of 90 IMPORTANT Notes on Internal Flash ROM of the MCU: In single-c hip mode and memory expansion m odes, this product downl oads a u ser program to the flash R OM of an MCU.
M306V8T-EPB User’s M anual 4. Hardware Specifications REJ10J0777-0100 Re v.1.00 2005.08.01 Page 81 of 90 IMPORTANT Notes on Debugging in CP U Rewrite Mode: When you deb ug an M16C/6 0 Series MCU s in CPU rewr ite mode, do n ot change the block 0 area ( FF000h-- FFFFFh) of the flash memory .
M306V8T-EPB User’s M anual 5. Troubleshooting REJ10J0777-0100 Re v.1.00 2005.08.01 Page 82 of 90 5. Troubleshooting This chapte r describes h ow to tr oubleshoot when this product does not wor k properly. 5.1 Flowchart to Remedy the Troubles Figure 5.
M306V8T-EPB User’s M anual 5. Troubleshooting REJ10J0777-0100 Re v.1.00 2005.08.01 Page 83 of 90 5.2 When the Emulator Debugger D oes Not Start Up Properly (1) When the LEDs of the PC7501 Do Not Display Normally Table 5.1 Err ors LEDs sh ow and their checkpoint s Error Connection to the user system Checkpoint LEDs do not light up.
M306V8T-EPB User’s M anual 5. Troubleshooting REJ10J0777-0100 Re v.1.00 2005.08.01 Page 84 of 90 (2) MCU Setting Dialog Box Does Not Appear at Emulator Debugger Startup Table 5.2 Chec kpoints of e rrors at deb ugger st artup Error Checkpoint Communi cation error occ urred.
M306V8T-EPB User’s M anual 5. Troubleshooting REJ10J0777-0100 Re v.1.00 2005.08.01 Page 85 of 90 (3) Errors Occu r at Em ulator Debugger Startup Table 5.3 Chec kpoints o f errors at debugger startup Error Checkpoint Target MCU is uncontroll able. (1) Check that the NQPACK etc.
M306V8T-EPB User’s M anual 5. Troubleshooting REJ10J0777-0100 Re v.1.00 2005.08.01 Page 86 of 90 5.3 How to Request for Support After checking the items in "5 Troub leshooting", send the following inf ormation to your local d istributor.
M306V8T-EPB User’s M anual 6. Maintenance and Guarantee REJ10J0777-0100 Re v.1.00 2005.08.01 Page 87 of 90 6. Maintenance and Guarantee This chapter describes how to maintenance, repa ir provisions and how to request for repair. 6.1 User Registration When you purchase our product, be sure r egister as a user.
M306V8T-EPB User’s M anual 6. Maintenance and Guarantee REJ10J0777-0100 Re v.1.00 2005.08.01 Page 88 of 90 (3) Expiration of the repair period When a period of one year el apses after the m odel was dr opped from productio n, repairing p roducts of t he model may become im possible.
Emulation Probe for M16C/60 Series M16C/6V Group M306V8 User’s Ma nual M306V8T-EPB Publication Date: Aug. 1, 2005 Rev.1.00 Published by: Sales Strategic Planning Div. Renesas Technology Corp . Edited by: Microcomputer Tool Development Department Renesas Solutions Corp.
M306V8T-EPB User’s Manual.
Ein wichtiger Punkt beim Kauf des Geräts Renesas Emulation Probe M306V8T-EPB (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Renesas Emulation Probe M306V8T-EPB noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Renesas Emulation Probe M306V8T-EPB - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Renesas Emulation Probe M306V8T-EPB reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Renesas Emulation Probe M306V8T-EPB erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Renesas Emulation Probe M306V8T-EPB besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Renesas Emulation Probe M306V8T-EPB verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Renesas Emulation Probe M306V8T-EPB. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Renesas Emulation Probe M306V8T-EPB gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
