Benutzeranleitung / Produktwartung RCU500 des Produzenten RCA
Zur Seite of 16
RCU500 Universal Remote Control • • • TABLE OF CONTENTS Button Description ..............................................2 Setting Up Your Universal Remote ..................3 Programming Your Universal Remote Programming with Code Search ......
Button Description • • • Code Search Button Programs devices by searching through brand codes. Use when code lists are not available or when the listed code does not work with your device. See page 4. Device Buttons ( VCR1, VCR2•LD, SAT•CABLE, AUDIO, TV) Determines which device you are controlling.
3 Place Batteries in the remote 1. Remove the battery compartment cover. 2. Place 4 AAA batteries as shown, matching the + and – end of each battery as indicated in the battery compartment. 3. Replace the cover. Determine if your remote needs programming Some RCA, GE and ProScan devices may already be preprogrammed.
4 Programming a Device using CODE SEARCH 1. Manually turn on your device (TV, VCR, Laserdisc Player, Satellite Receiver, Cable Box or Audio Equipment). 2 . Press and hold CODE•SRCH . 3. Press and release the device button you want to set up (TV, VCR1, VCR2•LD, SAT•CABLE, or AUDIO) .
5 Programming Y our Universal Remote Programming a Device using CODE LISTS 1 . Find codes for each device and brand on page numbers shown below. Device Page TV 12 VCR 13 LaserDisc Player 14 Satellite Receiver 14 Cable Box 14 Audio Equipment 15 2. Press and hold the TV, VCR1, VCR2•LD , SAT•CABLE , or AUDIO button you want to set up.
6 Turning the TV On and Off. 1. Press TV to set the remote to control the TV (Most RCA, GE and ProScan models will only turn on when TV is pressed, not POWER.) 2. Press POWER to turn the TV on or off. Change Channels on the TV Press CHANNEL UP or CHANNEL DOWN to change channels on the TV or enter the channels as you would normally for your TV.
7 Turning the Cable Box On and Off. 1. Point the remote at the cable box and press SAT•CABLE. 2. Press POWER to turn it on or off. Changing Channels on the Cable Box. Press CHANNEL UP or DOWN to change channels on the cable box or enter the channel as you would normally for your cable box.
Turn the VCR On and Off. 1. Press VCR1 or VCR2•LD to set the remote to control the VCR. (Most RCA, GE and ProScan models will only turn on when pressing VCR not POWER). 2. Press POWER to turn the VCR on or off. Using the VCR function buttons. 1. Turn on the VCR.
9 Turn the Laserdisc Player On and Off. 1. Press VCR2•LD to set the remote to control the Laserdisc Player. 2. Press POWER to turn the Laserdisc Player on or off. Using the Laserdisc Player function buttons. 1. Turn on the Laserdisc Player. 2. Place a disc in the Laserdisc Player.
10 RCA, GE, and ProScan televisions use three different menu systems. Read the following descriptions, and choose the one that matches your TV. System 1: If you use MENU, +, and – buttons on your cu.
11 Operating Y our TV/VCR Combo Unit Special Operations RCA, GE and PROSCAN Brand Devices: Many of these devices (TVs and VCRs) will not need to be programmed. In the event that programming is required, the code search method is suggested. Note: With these brands, the device button (TV, VCR1, VCR2•LD, AUDIO) will usually turn the units on.
12 TV Code List A–Mark ................................................102 Admiral ................................................005 Amtron .................................................064 Akai ...............................................002,103 Anam .
13 VCR Code List Admiral .......................................006 Aiwa ............................................015 Akai ..........003,017,022,023,063,066 Audio Dynamics .................014,016 Bell & Howell .............................002 Broksonic .
14 Cable Box Code List TV/VCR Combinations ABC .........................022,046,053,054 Anvision ...............................007,008 Cablestar ..............................007,008 Diamond .....................................056 Eagle ............
15 Audio Equipment Code List ADS AMP ......................................001 AIWA CD .........................................060 AKAI AMP ...............................002,008 DENON CD ........................................057 DYNAMIC BASS AM/FM .
W ORKS UP T O 5 VIDEO AND A UDIO COMPONENTS: More versatile than competitive models. Replace up to 5 remote controls...1 TV, 1 VCR, 1 VCR or Laser Disc Player, 1 Cable Box or Satellite Receiver and 1 Audio Component. Specially designed for home theatre.
Ein wichtiger Punkt beim Kauf des Geräts RCA RCU500 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie RCA RCU500 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für RCA RCU500 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von RCA RCU500 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über RCA RCU500 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon RCA RCU500 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von RCA RCU500 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit RCA RCU500. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei RCA RCU500 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.