Benutzeranleitung / Produktwartung PLTVR5 des Produzenten PYLE Audio
Zur Seite of 16
OWNER’S MANUAL COLOR LCD TV/RECEIVER WITH CD CHANGER CONTROL PL TVR5.
2 INST ALLA TION Notes: • Choose the mounting location where the unit will not interfer e with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sur e it is all connected up properly and the unit and the system work pr operly .
3 MOUNTING THE TUNER UNIT 1. Bracket (A) 5. T apping Screw with W asher (M5 x 12) 2. Mounting Bolt (M5 x 5) 6. Spring W asher (M6) 3. Bracket (B) 7. Spring W asher (M5) 4. Hexagonal Bolt with W asher (M6 x 12) 8. Double Sided T ape INST ALL THE DISPLA Y UNIT Before install the display unit, please r emove its tail screw and cable parts.
1. Dashboard 2. Nut (M5) 3. Spring W asher 4. T apping Screw with W asher (M5 x 25) 5. Screw 6. Plain W asher 7. Strap Be sure to use the strap to secur e the back of the unit in place. The strap can be bent by hand to the desired angle. Removing the unit 1.
5 HOW TO OPEN AND CLOSE THE SCREEN DISPLA Y 1. Pr ess release button to draw out the scr een display . 2. T ur ning the display upward. 3. Adjusting the viewing angle.
4. T ur ning the display downward. Make sur e to return the display to centre position before drawing in. It cannot be draw in with its angles adjusted.
ELECTRICAL CONNECTION CAUTION: 1. If the TV contr ol grey cable is connected to car brake, when the car is running, you cannot switch into TV mode. 2. T o select CD changer ’ s sort: Before installing the unit, connect the CD changer with the unit corr ectly and turn on the power to make the unit work in CD changer state.
8 OPERA TION 30 4 28 29 26 24 27 25 31 23 15 4 11 1 9 2 10 5 16 13 14 32 12 20 21 19 18 17 22 3 6 8 7.
9 GENERAL OPERA TION • ON/OFF Switch on the unit by pressing POWER button (1). When system is on, pr ess it again to turn it off. • F ACEPLA TE RELEASE Press REL button (2) to draw out the faceplate, push the panel to draw in. When the faceplate is drawn out, turn the faceplate upward and adjust TV display .
10 • MONO/STEREO Press MON button (10) to select mono or ster eo mode. In radio operation, press the button to select mono or ster eo reception for radio station. Y ou can sometime improve reception of distant stations by select mono mode. • SETTING THE CLOCK Press DSP button (5) to change the display into clock display .
RADIO OPERA TION • SELECTING BAND Press BAND button (11) to change between three FM bands and two AM bands. Each band stores up to six pr eset stations. • SELECTING STATION During radio mode, press button (13) to incr ease frequency or button (14) to decrease fr equency by one step of channel spacing.
12 CDC OPERA TION • SELECTING TRACK During CDC mode, press button (14) or button (13) shortly to move to the previous track or the next track. The track number shows on the display . • SELECTING CD Press D.UP button (17) to select next disc and D.
TV OPERA TION • SELECTING RECEIVING MODE Press TV/A V button (31) to select among TVch/A V1/AV2. • PICTURE ADJUSTMENT/PROGRAM SETTING/SYSTEM CONTROL In TV mode, press MENU button (23) to enter the main menu. And the menu includes three sub-menus: PICTURE MENU, TUNER MENU and SYSTEM MENU.
14 In the course of scanning, press SCAN button (26), “ SCAN OFF ” will also display on the screen and it stops on the TV channel just scanning. • SCREEN DISPLA Y Press DISP button (27), the scr een will display the current status such as TVch/A V1/AV2, the COLOR SYSTEM and the SOUND SYSTEM on the right-top corner .
15 REMOTE CONTROL HANDSET 2 11 8 9 10 16 5 6 7 14 13 15 12 17 4 3 1 CONTROL & FUNCTION KEYS 1. POWER = Press POWER to turn the unit ON or OFF 2. TV/A V = Switch between TV/A V1/AV2 3. 0 - 9 = Numeric buttons, press to select the corr esponding channel 4.
SPECIFICATION GENERAL P o wer Supply V oltage : DC 12 V olts, Negative Ground Maximum P o wer : 4 x 60 Watts Load Impedance : 10 Ampere (max.) Tone Controls - Bass (at 100 Hz) : + / – 10 dB - T reble (at 10 KHz) : + / – 10 dB TV Monitor Screen Size : 5.
Ein wichtiger Punkt beim Kauf des Geräts PYLE Audio PLTVR5 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie PYLE Audio PLTVR5 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für PYLE Audio PLTVR5 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von PYLE Audio PLTVR5 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über PYLE Audio PLTVR5 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon PYLE Audio PLTVR5 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von PYLE Audio PLTVR5 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit PYLE Audio PLTVR5. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei PYLE Audio PLTVR5 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.