Benutzeranleitung / Produktwartung PLD162 des Produzenten PYLE Audio
Zur Seite of 28
OWNER’S MANUAL Mobile Audio/V ideo System • IN DASH SINGLE DVD/RADIO PLA YER • AUDIO CD/CDR/CDRW/MP3 COMP A TIBLE • DET ACHABLE F ACE • AM/FM RADIO TUNER • REMOTE CONTROL HANDSET • 4 X 40 W A TTS POWER OUTPUT • 2 P AIRS RCA LINEOUT • AUX INPUT FUNCTION • SUBWOOFER OUTPUT PLD162 www .
2 Compatible with P AL DVD (Video CD) and NTSC DVD (Video CD) This player can play discs recor ded in either P AL or NTSC format. • A single LSI chip now integrates all major DVD playback circuit functions including MPEG2 decoder , video D/A converter , and audio decoders.
3 CONTENTS Safety Information ........................................................................................4 Disc Notes .....................................................................................................5 Installation ....
4 CAUTION: MOBILE DVD PLA YER IS A CLASS I LASER PRODUCT . HOWEVER THIS MOBILE DVD PLA YER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIA TION EXPOSURE IF DIRECTED. BE SURE TO OPERA TE THE MOBILE DVD PLA YER CORRECTL Y AS INSTRUCTED.
DISC NOTES 5 Disc formats supported by this player DVD 12 cm disc Video CD 12 cm disc CD 12 cm disc MP3 12 cm disc Discs which cannot be played with this player • DVD-ROM • DVD-R/DVD-RAM • CDV • CD-G Handling and Cleaning • Dirt, dust, scratches and warping disc will cause misoperation.
6 INST ALLA TION Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly .
7 6 . Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver . Not all tabs will be able to make contact, so examine which ones will be most effective. Bending open the appr opriate tabs behind the dashboard to secur e the sleeve in place.
INST ALLA TION DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow these mounting instructions. Use the screw holes marked T (T oyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle.
9 USING THE DET ACHABLE FRONT P ANEL REMOVING THE FRONT P ANEL 1. Pr ess the release button (REL) on the front panel and pull of f the front panel. 2. Keep fr ont panel into the case. INST ALLING THE FRONT P ANEL T o install the fr ont panel, insert the panel into the housing and make sure the panel is properly installed.
10 WIRING CONNECTION 20 PIN SOCKET CONNECTIN FUSE SUBWOOFER CABLE (GREEN) MEMORY BACK-UP(B+) REAR RCA CABLE (GREY) Rch Lch DIGIT AL AUDIO (ORANGE) VIDEO OUT 1 (YELLOW) VIDEO OUT 2 (YELLOW) A V OUT CAB.
1. POWER 2. 3. Disc Slot 4. SEL EQ (SW) 5. 6. Disc Slot IR 7. REL ( ) 8. TUNING knob 9. MODE 10. DSP 11. MUTE 12. BND/LOUD 13. MON 14. RDM 15. RPT 16. / 17. 18. VOLUME knob 19. SEL 20. Liquid Crystal Display LOCA TION AND FUNCTION OF KEYS THE PLA YER 11 When remove the fr ont panel: 21.
12 REMOTE CONTROL LOCA TION AND FUNCTION OF KEYS 6 1 3 7 11 4 8 10 5 9 12 13 14 16 15 17 20 18 19 24 21 28 22 32 23 25 29 27 26 31 30 2 33.
13 LOCA TION AND FUNCTION OF KEYS 1. POWER Press POWER to turn the unit ON or OFF . 2. EJECT Press to eject the disc. 3. MUTE Press to mute the sound. 4. SUBTITLE Changing of the SUBTITLE language on multi-subtitle language DVD disc. 5. ANGLE Changing of the view angle on multi-angle DVD disc.
Preparing the Remote Contr ol Inserting the Batteries 1. Open the battery compartment cover . 2. Insert the new battery . Make sure that the positive and negative terminals of the battery are oriented as indicated.
15 GENERAL OPERA TION TURNING ON THE PLA YER Press the POWER button on the fr ont panel to turn on the power . When the unit is on, it will search the disc automatically . If there is a disc in the disc slot, the unit will start playback automatically .
16 GENERAL OPERA TION BASIC PLA Y OPERA TION remote contr ol is pressed, normal playback will continue. - Press (Stop) button twice to stop the playback and go back to DVD LOGO. Pausing Play/Step Play Pressing on the remote contr ol for the first time or presing on the front panel during playback will stop playback temporarily .
17 ADV ANCED OPERA TION REPEAT PLA Y/ P ARAGRAPH REPEA T PLA Y Repeat play: when you want to repeat playing the whole disc or a track or a chapter in the disc. 1) Press REPEA T button repeatedly to select differ ent repeat modes. 2) For dif ferent kinds of disc, pr essing REPEA T button has differ ent effects.
ADV ANCED OPERA TION 18 ON-SCREEN DISPLAY FUNCTION Press the CONSOLE button during playback to display the console information of the current disc on the screen.
19 ADV ANCED OPERA TION Note: The function is only effective when the LOGO is shown. That is to say , when no disc in, ejecting a disc and in stop mode or pre-stop mode when playing DVD/VCD, pressing P AL/NTSC is effective. RANDOM PLA YING Pressing RANDOM button during playback will start to play tracks in random order .
ADV ANCED OPERA TION 20 ZOOM FUNCTION When playing DVD, VCD or some data discs which including picture files, if you want to view the some part of the picture clearer: 1) Press ZOOM button to zoom in the picture 4 times. 2) Press ZOOM button again to zoom in the picture 16 times.
21 ADV ANCED OPERA TION NOTE : • For how to set the “Parental Contr ol” level, please refer to “SETUPLOCK” in the following page. A TT ACHMENT : P ARENT AL CONTROL DVD discs have a parental level assigned to the disc. The range of parental contr ols is from 1 to 8.
22 ADV ANCED OPERA TION • Press or ENTER button to open the highlight folder in the play list or play the audio file in the play list or program list. • Use “ADD”, “ADD ALL”, “DELETE”, and “DELETE ALL” these four operation buttons on the middle edit area to edit the pr ogram list.
23 SETUP In the stop mode or when the disc is playing, press SETUP on the r emote control to enter setup menu. • When the cursor is on the topside, use / buttons to move between the differ ent pages. • Press button to move the cursor to the setup page below and then you can use / buttons to move between the differ ent setup options.
24 SETUP DISPLA Y SETUP • When you open the DISPLA Y menu, you will see the following picture: DISPLA Y TV Aspect Display Mode TV Output 4:3 Letterbox Auto Select Move • “TV Aspect” is used to set the appropriate display ef fect when wide- screen video material is played on a conventional screen.
25 SETUP LOCK SETUP • When you open the LOCK setup page, you will see the following picture: • “Rating” is used to set the parent contr ol level. • When you enter into this item, the system will requir e you to input the password, only the passwor d is correct, can you be permitted to change the parent lock level.
If it appears that your DVD unit is faulty , first consult this checklist. It may be that something simple has been overlooked. Under no circumstances should you try to repair the player yourself, as this will invalidate the warranty . Only qualified service personnel can remove the cover or service this player .
27 SPECIFICATIONS GENERAL P ow er Supply Requir ements : 12V DC (11V -15V), test voltage 14.4V , Negative Ground Chassis Dimensions : 178 (W) x 160 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : 10 dB - T reble (at 10 KHz) : 10 dB Maximum Output P o wer : 4 x 40 watts Current Drain : 5 Ampere (max.
88-V2182-01 28 SPECIFICA TIONS Video signal system : Compositive video 1.0Vp-p 75 Ω Discs Played : (1) 5” (12 cm) DVD-VIDEO disc (2) Compact Disc (CD-DA/CD-R/CD-R W/MP3) (3) 5” (12cm) VIDEO CD Audio Output Level : 10k Ω (2 ch 2.
Ein wichtiger Punkt beim Kauf des Geräts PYLE Audio PLD162 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie PYLE Audio PLD162 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für PYLE Audio PLD162 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von PYLE Audio PLD162 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über PYLE Audio PLD162 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon PYLE Audio PLD162 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von PYLE Audio PLD162 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit PYLE Audio PLD162. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei PYLE Audio PLD162 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
