Benutzeranleitung / Produktwartung 620 des Produzenten ProForm
Zur Seite of 32
Serial Number Decal Model No. 831.24755.1 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. TREADMILL EXERCISER User ’ s Manual • Assembly • Operation • Maintenance • Part List and Drawing Sears, Roebuck and Co.
T ABLE OF CONTENTS W ARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. Before beginning any exercise program, con- sult your physician. This is especially impor- tant for persons over the age of 35 or persons with pre-existing health problems. 2. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.
4 20. Never leave the treadmill unattended while it i s running. Always remove the key, unplug the power cord, and switch the reset/off cir- c uit breaker to the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the circuit breaker.
5 T hank you for selecting the revolutionary PROFORM ® X P WEIGHT LOSS 620 treadmill with Universal Dock for iPod. The XP WEIGHT LOSS 620 treadmill offers an impressive array of features designed to make your workouts at home more enjoyable and effective.
6 ASSEMBL Y A ssembly requires two persons. S et the treadmill in a cleared area and remove all packing materials. D o not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
7 3. Identify the Right Upright (78) and the Right Upright Spacer (79), which are marked with stickers. Insert the Upright Wire (38) through the Right Upright Spacer as shown. See the inset drawing. Tie the long tie in the Right Upright (78) securely around the end of the Upright Wire (38).
8 6. Set the Left Upright Spacer (76) on the Base (83). With the help of a second person, hold a Bolt Spacer (80) inside the lower end of the Left Upright (74). Insert a 3/8" x 4" Bolt (6) with a 3/8" Star Washer (9) into the Left Upright and the Bolt Spacer.
9 9. Attach the Pulse Bar Bottom (95) to the Left Handrail (33) and the Right Handrail (34) with two #10 x 3/4" Screws (5) and two #10 Star Washers (27). Remove the long tie from the Upright Wire (38). 9 95 5 5 38 34 33 27 27 Long Tie 7. Press a Front Handrail Endcap (97) into the Left Handrail (33).
10 12. Identify the Storage Latch (53). Remove the tie from the end of the tube. Make sure that the sleeve has been slid over the indicated hole and that the Latch Knob (54) is locked into the hole. Pull on the sleeve to make sure that it is locked into place.
1 1 If you purchase the optional chest pulse sensor (see page 18), follow the steps below to install the re - ceive r inc luded with the chest pulse sensor. 1. Make sure that the power cord is unplugged. Remove the indicated #8 x 3/4" Screw (12) and the Access Door (87) from the Console Base (93).
12 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- i cone spray or other substances to the walking b elt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
13 FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effec- tive and enjoyable. When you use the manual mode, you can change the speed and incline of the treadmill with the touch of a button.
14 HOW TO TURN ON THE POWER I MPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem- p erature before turning on the power. If you do not do this, the console displays or other electrical components may become damaged.
5. Select a display mode and monitor your progress with the display. As you walk or run on the treadmill, the display can s how the following workout information: • A 1/4-mile (400 meter) track. • The approximate number of calories you have burned.
HOW TO USE A CLASSIC WORKOUT 1 . Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 14. 2. Select a classic workout. To select a classic workout, press the Classic Workouts button repeatedly. The duration, maxi- mum speed set- ting, and maximum incline setting of the workout will appear in the display.
HOW TO USE THE WEIGHT LOSS CENTER 1 . Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 14. 2. Select a weight loss workout. To use the weight loss center, press the Weight Loss Center button.
HOW TO USE THE STEREO SOUND SYSTEM T his product has been designed specifically to work with iPod and has been certified by the developer to m eet Apple performance standards.
19 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE B efore folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the pow er cord.
20 HOW TO LOWER THE TREADMILL FOR USE 1 . Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. It may be nec- e ssary to push the frame forward as you pull the knob to the left. Pivot the frame downward and release the latch knob.
21 TROUBLESHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the back cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
22 Remove the key from the console and UNPLUG THE POWER CORD. Remove the three #8 x 3/4" S crews (12) and carefully pivot the Hood (57) off. Locate the Reed Switch (64) and the Magnet (42) on the left side of the Pulley (43). Turn the Pulley until the Magnet is aligned with the Reed Switch.
23 PROBLEM: The walking belt is off-center or slips when walked on S OLUTION: a . I f the walking belt is off-center, f irst remove the key and UNPLUG THE POWER CORD .
24 These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results.
25 SUGGESTED STRETCHES T he correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1 . Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
26 P ART LIST—Model No. 831.24755.1 R 1107A Key No. Qty. Description Key No. Qty. Description 1 6 #8 x 1/2" Screw 2 4 #8 x 1" Tek Screw 3 1 Hex Key 4 4 3/8" x 2" Bolt 5 2 #10 x 3.
27 Key No. Qty. Description Key No. Qty. Description 1 01 1 Pulse Bar Ground Wire 102 1 iFIT Universal iPod Connector 103 1 Filter Wire 104 1 Lift Motor Spacer 1 05 2 #8 x 2" Screw 106 1 Key Boar.
4 4 54 53 8 8 17 18 18 20 31 30 20 31 30 59 24 24 29 29 46 46 25 25 25 25 25 41 49 50 48 43 44 42 45 49 51 55 58 43 56 57 57 48 3 25 25 25 10 107 17 36 36 40 40 1 1 1 1 59 63 63 28 EXPLODED DRA WING A—Model No.
11 11 11 11 72 15 71 37 37 37 12 12 12 1 24 24 68 69 28 24 67 61 66 73 70 103 39 19 19 65 32 24 105 105 26 108 11 0 64 111 108 109 11 3 11 2 62 EXPLODED DRA WING B—Model No.
81 2 81 2 81 2 4 84 8 8 84 4 6 9 6 6 9 9 7 9 7 9 21 22 11 3 11 3 75 23 23 8 8 77 77 74 78 83 82 76 79 82 86 85 80 80 80 13 81 2 13 104 52 38 38 12 4 7 60 12 30 EXPLODED DRA WING C—Model No.
89 12 87 35 102 100 24 101 12 92 90 91 97 33 98 98 12 12 16 12 12 12 12 12 12 12 12 1 1 88 106 88 88 93 97 95 27 5 5 27 88 16 34 14 11 4 99 96 94 31 EXPLODED DRA WING D—Model No.
Part No. 260754 R1107A Printed in China © 2007 ICON IP, Inc. Y our Home For repair— in your home —of all m aj or brand app liances , lawn an d garden equipm ent, or heat ing an d cooli ng s y st .
Ein wichtiger Punkt beim Kauf des Geräts ProForm 620 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie ProForm 620 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für ProForm 620 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von ProForm 620 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über ProForm 620 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon ProForm 620 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von ProForm 620 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit ProForm 620. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei ProForm 620 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
