Benutzeranleitung / Produktwartung Network Disc Duplication & Printing System des Produzenten Primera Technology
Zur Seite of 50
061507-510991-(01) © 2007 All rights reserved USER’S MANUAL Network Disc Duplication & Printing System n 510991.qxd 6/15/2007 10:07 AM Page i.
ii Notices : The information in this document is subject to change without notice. NO W ARRANTY OF ANY KIND IS MADE WITH REG ARD TO THIS MA TERIAL, INCL UDING, BUT NOT LIMITED TO, THE IMPLIED W ARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE.
T able of Contents Section 1: Getting Started ......................................................................................1 A. Choosing a Good Location ......................................................................1 B. Unpacking and Inspection.
There are interactive features that will allow you to jump to different locations within the document. Each listing in the T able of Content s is interactive. Place the cursor on either the words or the p age number . A small hand with a pointing finger icon appears.
Getting Started 1 Section 1: Getting Started THANK Y OU… ...for purchasing the Bravo XRn Network Publisher . XRn is the perfect all-in- one solution for producing professional looking CD, DVD, and Blu-ray (if equipped) discs in a network ed environment.
2 Getting Started B. UNP ACKING AND INSPECTION The following items are inside the box: • Bravo XRn Network Publisher • 2 Gray Plastic Input and Output Bins (Located inside cardboard insert) • P .
Getting Started 3 C. IDENTIFYING THE P ARTS This illustration shows the XRn and its components. The Robotic Disc T ransporter moves discs from the left or right Bin, to a CD/DVD Recorder , to the printer , and finally to the Output Bin. The CD/DVD R ecorder is automatically loaded and unloaded by the units's Robotic Disc T ransporter .
4 Getting Started The Output bin is located on the front of the unit. The output bin hold up to 50 discs. The Front Cover is a durable plastic cover that will protect the unit from dust and interference. The Cover Lock allows you to lock the unit to prevent access to the blank discs and cartridges.
Getting Started 5 The P ower Input P ort connects to the included power cable. The internal power supply is a switching 100V~240V power supply . The P ower Switch shuts off all power to the unit. The Ether net P ort connects with the cable included to your network.
6 Hardware and Software Setup Section 2: Hardwar e and Softwar e Setup Setup This section will describe the step-by-step process of setting up your unit. This includes information on how to load the supplies (ink and disc media) necessary to start producing discs.
Hardware and Software Setup 7 • Insert the ink cartridges into the carrier , copper end first and snap the cartridge cover in place. Insert the color in the left holder , monochrome black in the right cartridge holder . • Close and lock the unit’s front cover .
8 Hardware and Software Setup • The Printer will automatically position the cartridge carrier and Robotic Disc T ransporter to the center position allowing for easy access to the bins. • Load the right and left bins with CDs, DVDs, D VD -DL or a combination.
Hardware and Software Setup 9 B. INST ALL THE PTPUBLISHER CLIENT SOFTWARE Place the Installer CD in the client computer's CD/DVD Drive. The Installer application will automatically launch in a few moments. Click Install Client to begin the installation.
10 Hardware and Software Setup T o disable the Guest account follow this procedure: 1. F rom any computer that can access the XRn, open a remote desktop connection. Go to Start - All Programs - Remote Desktop Connection. Note: Y ou may also hook up a monitor and k eyboard to the XRn to gain access.
Sending Jobs to the XRn 11 Section 3: Sending Jobs to the XRn A. TUT ORIAL: COPY A CD OR DVD Copy CD or Copy DVD can be used to copy any CD or DVD master . This project reads the master disc from your computer's drive to the hard drive of the XRn computer .
12 Sending Jobs to the XRn 4. Select the print label file by clicking the select a label button. When you have selected print label file, click the next arrow . There are several ways to select a print file. See the explainations below for more information.
Sending Jobs to the XRn 13 Locations. Click on the Locations tab to display favorite locations such as Desktop, My Documents or My Computer . Browse. Click on the Browse tab to display files in tree view on the left side of the screen. Open and close folders by clicking the + or - next to each folder .
14 Sending Jobs to the XRn Choose the 120mm DiscT emplate from the window that appears. Using the buttons on the left navigation window , you may add your own background, choose a pre-made back- ground, choose from several text effects or insert a picture.
Sending Jobs to the XRn 15 5. Y ou can edit the print settings for this file by changing the settings that appear . Several preset media types that correspond with the media availabe at our webstore are available from the Media drop down box.
16 Sending Jobs to the XRn When the job starts the Status window will appear . Here you can view the status of the printer , the robot, and the drive. Y ou can also view a log of all activity or cancel the job while its in progress. B. USING PTPUBLISHER The PTPublisher program is divided into six areas.
Sending Jobs to the XRn 17 4. R obot Status P anel This panel displays a picture of currently connected robot. The current status is also displayed. Important er rors such as low ink will be displayed here. Click " more status " to view status regarding the printer , recorder drive, cur rently r unning jobs and job history log.
18 Sending Jobs to the XRn 6. Project Detail W indow This screen changes depending on the selected panel option. It can display project steps such as A dding data and A dding a print file. It can also display robot status. Finally , the support center is displayed here any time you click on the help icon.
Sending Jobs to the XRn 19 1. Open the SureThing program. Choose the 120mm DiscT emplate from the window that appears. 2. Open the background panel by click the arrow on the back- ground button. A dd your own background to the label by choosing Select Backgound.
20 Sending Jobs to the XRn 4B. Y ou may also choose from several SureThing smart designs. These design templates automatically position your text and use certain te xt effects to give your label a professional look. Y ou can easily toggle through smart designs by using the middle toggle button on the toggle bar below the label.
Sending Jobs to the XRn 21 3. On the Summary screen you will notice an Archive Job check box. Check the Archive Job bo x. Three text fields will appear below the check box. F ill them out with the information requested. 4. Click Go to start the job. Once the Go button has been pressed the data is sent to the XRn.
22 Sending Jobs to the XRn 5. Once the data has been completely transferred to the XRn the archive job screen will be displayed. 6. Choose the name of the job that you submitted and click Go again. Note: Archiving Jobs on the XRn takes up hard drive space.
Sending Jobs to the XRn 23 3. The archive job screen will be displayed. Choose the name of the job that you submitted, set the number of copies and click Go . F r om the LCD Contr ol P anel Choose Archived Job from the main menu. Browse the available jobs using the buttons.
24 Administrator Utility and A dvanced F unctions Section 4: A dministrator Utility and A dvanced F unctions A. ADMINISTRA TOR UTILITY Install the administrator utility only for users who will need to.
Administrator Utility and A dvanced F unctions 25 Users Manage which users can send jobs to the XRn. There are three methods of user administration. Y ou can choose the one that fits your situation best. The first method is set by default. 1. Allow All Users to Submit Jobs - Any users with PTPublisher installed can submit jobs to the XRn (default).
26 Administrator Utility and A dvanced F unctions Notifications It is recommend that one or more persons are designated as XRn custodian who is responsible for refilling bins, changing cartridges, and generally making sure that the system is ready for jobs.
Administrator Utility and A dvanced F unctions 27 If a job calls for media that has not been designated in the admin utility , the user will be prompted of this fact but will be allowed to send the job anyway . The XRn will then pick from the default bin as specified in this window .
28 Administrator Utility and A dvanced F unctions Logging V iew and sort logs for all jobs submitted to the XRn. Archiv ed J obs V iew job details or delete jobs that have been archived by users. Using the slide bar at the bottom of the screen you can also adjust the amount spaced reserved for non-archived jobs.
Administrator Utility and A dvanced F unctions 29 B. ADV ANCED PRINTER DRIVER SETTINGS The most popular driver settings such as print quality , inner diameter and outer margin can be modified through the PTPublisher client software. The rest of the settings can be accessed in the following manner .
30 Administrator Utility and A dvanced F unctions Click on the Disc Publisher XR icon with the right mouse button and select Printing P r efer ences . Paper Size This setting is automatically set to CD/DVD from the PTPublisher client software and should not be set on the XRn.
Administrator Utility and A dvanced F unctions 31 Color Matc hing Click on the Color Matching down arrow and choose the color matching option that's right for you.
32 Administrator Utility and A dvanced F unctions Centering T est Print NO TE: Y our printer comes from the factor y pre-calibrated to print the image in the center of the CD.
Administrator Utility and A dvanced F unctions 33 5. Along the V ertical axis of the printed disc, find the number whose lines touch. F or example, in the above illustration, the number would be 2. Enter that number into the V ertical box of the Calibration window and 0 would be entered for the Horizontal axis.
34 Administrator Utility and A dvanced F unctions Select Clean button to send a simple test patter n to the printer . Be sure to have a disc in the Bravo's input bin and the front cover closed. The test pattern, shown below , purges ink through nozzles of your ink cartridge to clear any blockages.
Administrator Utility and A dvanced F unctions 35 Disc Output Location Do not change this setting! It should be left in the Kiosk mode setting. Enable Bi-di Printing When enabled the Bravo will print bi-directional for faster printing. The default is uni-directional printing.
36 Administrator Utility and A dvanced F unctions C. LCD CONTROL P ANEL OPERA TION Using the LCD Control P anel you can change the cartridge(s), run archived jobs, access utilities, restart the system or view errors and war nings. Below is a description of the basic operation and a description of the menus.
Administrator Utility and A dvanced F unctions 37 Main Menu The Main Menu allows access to all of the functions of the LCD Control P anel. Press the to select the function. Archived Jobs The Archived Jobs function allows access to any of the archived jobs stored on the unit.
38 Administrator Utility and A dvanced F unctions Install Cartridges This function allows you to change the color , black or both cartridges. See Section 2 - Step 2 for the complete cartridge change procedure. Once the cartridges has been installed you must tell the XRn which cartridge was installed by selecting it using the LCD Control P anel.
Administrator Utility and A dvanced F unctions 39 Cancelling Jobs When Jobs are running you may cancel them from the LCD Control P anel. The Busy status screen is displayed when jobs are in progress. Press the to access the cancel jobs sub-menu. Use the to move the cursor down to "Cancel Jobs".
40 Administrator Utility and A dvanced F unctions Impor tant notes: • The LCD goes into power save mode after 90 minutes of non-use. This means the screen becomes very dim. Simply press any button to return the brightness level to nor mal. • The LCD screen will automatically revert to the Idle or Busy Status screen after 30 seconds of non-use.
Maintenance and T r oubleshooting 41 Section 5: Maintenance and T r oubleshooting A. LCD ERR OR MESSAGES There are several error messages or war nings that will appear on the LCD Display . Below is a descriptions of each and their possible solutions. Input Empty .
42 Maintenance and T r oubleshooting B. CLEANING THE XRN Use a clean, lint-free rag with a small amount of ammonia window cleaner to clean the XRn's outside case and trays. This type of cleaner is very effective on inks that may accumulate on the printer tray .
Maintenance and T r oubleshooting 43 D. CLEANING THE INK CAR TRIDGES It may be necessary to clean the ink cartridge nozzles if you notice reduced print quality , or if you suspect an cartridge nozzle has become slightly dried out or clogged. If you are having print quality problems, follow the steps below: 1.
44 T echnical Specifications Section 6: T echnical Specifications Model Bravo XRn Network Publisher Printing Method Ink-Jet Processor Celeron D 2.93 GHz Memory 1GB Hard Drive 250 GB S A T A Printing R.
Index 45 Inde x A dministrator ..............................................................................9, 10 Alignment Calibration ............................................................30, 35 Archived Job ..................................
Printed in the United States of America P/N 510991 510991.qxd 6/15/2007 10:09 AM Page 48.
Ein wichtiger Punkt beim Kauf des Geräts Primera Technology Network Disc Duplication & Printing System (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Primera Technology Network Disc Duplication & Printing System noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Primera Technology Network Disc Duplication & Printing System - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Primera Technology Network Disc Duplication & Printing System reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Primera Technology Network Disc Duplication & Printing System erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Primera Technology Network Disc Duplication & Printing System besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Primera Technology Network Disc Duplication & Printing System verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Primera Technology Network Disc Duplication & Printing System. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Primera Technology Network Disc Duplication & Printing System gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
