Benutzeranleitung / Produktwartung INFMANU4093 des Produzenten Pride Mobility
Zur Seite of 32
Pride keeps a more detailed r eport on file at the factory . Date Inspect ed Inspector Quality Control - S tylus LS Inclusion of all Par ts Fit and Finish Per formance *INFMANU4093* Product Serial # S.
SAFETY GUIDELINES Copyright © 2010 Pride Mobility Products Corp. INFMANU4093/Rev A/November 2010 Authorized Pride Provider:_________________________________________________________________ Address : .
Stylus LS www.pridemobility.com 3 I. INTRODUCTION .............................................................................................................................. 4 II. SAFETY .............................................................
4 www.pridemobility.com Stylus LS I. INTRODUCTION SAFETY WELCOME to Pride Mobility Products (Pride). The wheelchair you have purchased combines state-of-the-art components with safety , comfort, and styling in mind. We are conf ident that these design features will provide you with the conveniences you expect during your daily activities.
Stylus LS www.pridemobility.com 5 Read and follow the information in the owner’s manual. Maximum seating weight. Keep your hands away from the tires when driving. Be aware that loose fitting clothi ng can become caught in drive tires. Avoid exposure to rain, snow, ice, salt, or standing water whenever possible.
6 www.pridemobility.com Stylus LS II. SAFETY GENERAL GUIDELINES MANDATORY! Do not operate your new wheelchair for the first time without completely reading and understanding this owner’s manual. Your wheelchair is a sta t e-of-the-art life-enhancemen t device designed to increase mobility.
Stylus LS www.pridemobility.com 7 Weight Limitations Your wheelchair is rated for a maximum weight capacity. Pleas e refer to the specifications table for t his limit. Keep in mind that the weight capacity includes the combined weight of the user and any accessories mounted to the wheelchair.
8 www.pridemobility.com Stylus LS WARNING! Never travel down an incline backward. Doing so may cause the wheelchair to tip. Always exercise extreme caution when negotiating an incline. WARNING! If your wheelchair is equipped with an optional carry bag mounted to the seatback, do not overload the bag or exceed the maximum load ra ting of the bag.
Stylus LS www.pridemobility.com 9 Outdoor Driving Surfaces Your wheelchair is designed to pr ovide optimum stability under normal driving conditions—dry, level surfaces composed of concrete, blacktop, or as phalt. However, Pride recognizes that there will be times when you will encounter other surface types.
10 www.pridemobility.com Stylus LS II. SAFETY Stairs and Escalators Wheelchairs are not designed to travel up or down stairs or escalators. Always use an elevator. WARNING! Never use your wheelchair to negotiate steps or escalators. Doors Determine if the door opens toward or away from you.
Stylus LS www.pridemobility.com 11 Removable Parts WARNING! Do not attempt to lift or move a whee lchair by any of its removable parts, includ ing the armrests, seat , and front riggings. Reaching and Bending Never reach, lean, or bend whil e driving your wheelchair.
12 www.pridemobility.com Stylus LS II. SAFETY Prescription Drugs/Physical Limitations Users must exercise care and comm on sense when operating a wheelchair. This includes awareness of safety issues when taking prescribed or ove r-the-counter drugs or when the us er has specific physical limitations.
Stylus LS www.pridemobility.com 13 III. YOUR WHEELCHAIR THE STYLUS LS The Stylus LS is a rear-wheel dr ive wheelchair designed to operate bot h indoors and outdoors on smooth surfaces.
14 www.pridemobility.com Stylus LS Figure 9. Folding the Stylus LS III. YOUR WHEELCHAIR USING THE STYLUS LS The Stylus LS is a manual wh eelchair. Either an atten- dant pushes it, or you move it by gripping the handrims (see figure 5) and turning them in the desired direction of travel.
Stylus LS www.pridemobility.com 15 III. YOUR WHEELCHAIR Figure 10. Lifting Po ints BACK CANE HANDLES SEAT BASE RAILS Transporting Your Stylus LS The Stylus LS was designed to be folded and stored in a secure location, such as the trunk of a car, during motor vehicle transport.
16 www.pridemobility.com Stylus LS IV. COMFORT ADJUSTMENTS COMFORT ADJUSTMENTS After becoming familiar with your wh eelchair’s operation, you may find the ne ed to make some adjustments to increase .
Stylus LS www.pridemobility.com 17 IV. COMFORT ADJUSTMENTS 2. Reposition the drive wheel up or down to the desired position. See figure 12. NOTE: The wheel height can be adjusted to 3 different positions. Se e figure 13 for more information on seat-to-floor heights.
18 www.pridemobility.com Stylus LS IV. COMFORT ADJUSTMENTS Footrest/Leg Rest Removal The Swing-away Footrests (SFR) and Elevating Leg Rests (ELR) can be moved or removed to aid in trans- fers or transporting your wheelchair. To move the SFR or ELR to the side: 1.
Stylus LS www.pridemobility.com 19 ELR Angle Adjustment You can change the ELR angle from 70°-0°. See figure 17. To change the ELR angle: 1. Lift the ELR to the desired position to raise it. 2. To lower the ELR, pull the release lever forward. 3. Lower the ELR to the desired angle.
20 www.pridemobility.com Stylus LS IV. COMFORT ADJUSTMENTS Seatback Angle Adjustment (Optional) Your wheelchair may be e quipped with angle adjustable back canes that allow you to ad just the seatback to one of five different angles. The a ngle adjustment range is 85°- 105° in 5° increments.
Stylus LS www.pridemobility.com 21 IV. COMFORT ADJUSTMENTS Seat Angle (Dump) The position of the caster wheels affects the angl e (dump) of the seat. By ch anging the location of the caster wheel on the fork, you change the seat angle. See figure 23. NOTE: You can also adjust the seat angle by raising or lowering the drive whee l.
22 www.pridemobility.com Stylus LS IV. COMFORT ADJUSTMENTS Figure 25. Caster Angle Adjustment TOP BOLT BOLT SHAFT POSITION 1. POSITION 2. POSITION 3. AFT FORE BOLT HEAD Caster Top Bolt Bottom Bolt Caster Position Position Position Wheel Angle 1 Fore Aft 95° 2 Fore Fore 90° 3 Aft Fore 85° Figure 24.
Stylus LS www.pridemobility.com 23 CARE AND MAINTENANCE Your Stylus LS requires routine main tenance checks. You can pe rform some of these checks, but others req uire assistance from your authorized Pride Provider. Preventive maintenance is very important.
24 www.pridemobility.com Stylus LS V. CARE AND MAINTENANCE WARNING! The manual wheel locks are designed to keep your chair stationary while you are parked. They are not designed to st op the wheelchair during driving. Do not use either of the manual wheel locks to stop the wheelchair while driving it.
Stylus LS www.pridemobility.com 25 V. CARE AND MAINTENANCE Wheel Replacement If you have pneumatic tires and you have a flat tire, you can repl ace the tube. If your whee lchair is equipped with a solid tire insert, then you must re place the entire wheel assembly.
26 www.pridemobility.com Stylus LS V. CARE AND MAINTENANCE Seat Tension After a period of use, you may find it necessary to adjust the seat tension. To adjust the seat tension: 1. Loosen the screws that attach the seat to the side rail on the left side (side with hook and loop fastener).
Stylus LS www.pridemobility.com 27 VI. WARRANTY Pride warrants this product, so far as the same is of it s own manufacture, to be free of defects in material and workmanship, when used by the purchas er under normal conditions, for (1) year after purchase.
28 www.pridemobility.com Stylus LS APPENDIX I - SPECIFICATIONS STYLUS LS SPECIFICATIONS Seat Dimensions: 16 in. x 16 in ., 16 in. x 18 in ., 18 in x 16 in., 18 in. x 18 in., 20 in. x 16 in., 20 in. x 18 in. Back Height: 17-19 in. (43.18-48.2 6 cm) Seat Upholstery: Adjustable te nsion Seat-to-Floor Height See figure 13.
Stylus LS www.pridemobility.com 29 Figure 28. Stylus LS Specifications APPENDIX I - SPECIFICATIONS LENGTH (without front riggings) 31 in. (78.74 cm) with 16 in. seat 33 in. (83.82 cm) with 18 in. seat WIDTH 23.25 in. (59.06 cm) with 16 in. seat 25.5 in.
30 www.pridemobility.com Stylus LS NOTES.
SAFETY GUIDELINES Copyright © 2010 Pride Mobility Products Corp. INFMANU4093/Rev A/November 2010 Authorized Pride Provider:_________________________________________________________________ Address : .
Pride keeps a more detailed r eport on file at the factory . Date Inspect ed Inspector Quality Control - S tylus LS Inclusion of all Par ts Fit and Finish Per formance Product Serial # STYL US LS.
Ein wichtiger Punkt beim Kauf des Geräts Pride Mobility INFMANU4093 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pride Mobility INFMANU4093 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pride Mobility INFMANU4093 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pride Mobility INFMANU4093 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pride Mobility INFMANU4093 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pride Mobility INFMANU4093 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pride Mobility INFMANU4093 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pride Mobility INFMANU4093. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pride Mobility INFMANU4093 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
