Benutzeranleitung / Produktwartung PTID-3600T des Produzenten Power Acoustik
Zur Seite of 26
PTID-3600/ PTID-3600T In-Dash 3.6” Monitor Touch Sensor DVD/CD/MP3/M P4 MW/FM Radio Built-in TV tuner Owner’s Manual Take the time to read thro ugh this ow ner’s manual. Familiarity with installation and operation pr ocedures will hel p you obtain the best Performance from your new DVD-receiver.
Page - 1 Table of Contents Table of Contents..... ............................ .................... ......................... ........................ ........ ......... 1 Important Safeguards ................ ............... ........ ........ .......
Page - 2 Important Safeguards z Using the device at temperature below -10 may cause the breakage of the device. BEFORE ℃ USING PLEASE HEAT UP TH E PASSENGER COMPARTMENT TO THE RECOMMENDED TEMPERATURE! z Read carefully through t his manual to familiarize yourself with this high-qualit y sound system.
Page - 3 Accessories Package contains the following accessories for instal lation and operation of the unit. (1) W asher , S pring W asher , M5 Nut 1 each (2) Mounting S trap 1 (3) Screw 1 (4) Bolt 4 .
Page - 4 Installation/Un-Installation First complete the electric al connections, and then check them for correctness. Installation This unit can be installed in any dashboard havi ng an opening as shown on the picture. The dashboard should be 4.75 – 5.
Page - 5 Wiring Connections Make sure you have good chassis ground. A good ground connection will eliminate most electrical noise problems. A good chassis ground requires a tight connection to the veh icle’ s metal chassi s.
Page - 6 Detachable Control Panel Detaching the control panel z Turn the Power off. z Press OPEN button release the panel. z Pull t he panel out. Attaching the control panel z Ins ert the left side of the control panel into the main unit. z Press the control panel right side until the “click” sound is heard.
Page - 7 Panel Controls Front panel 1. AU X IN 2. POWER/ MUTE 3. IR sensor 4. AS/PS 5. SEL 6. VO L + 7. PLAY/PAUSE 8. MENU 9. TFT display 10. OPEN 11. MODE 12. PREVIOUS 13. VOL 14. OK 15. NEXT 16. BAND 17. USB 18. M emory Card s lot 19. EJECT button 20.
Page - 8 IR Remote Control REPLACIN G THE BATTERY Remote Control comes with a CR-2025 Lithium Battery included. 1. Remove the Battery Holder from the back of the Remote Control. 2. Insert a CR-2025 Lithium battery with the positive (+) mark upward. Insert the Battery Holder into the back of the Remote Control.
Page - 9 Do not re-charge, short, disassemble or heat the battery or dispose it in fire. Do not expose or bring into contact the battery with other metallic materials.
Page - 10 Audio Setting Press SEL button on the Remote Control to select the audio setting (or on front panel, long press SEL button in radio mode, short press SEL butt on in other mode to select the audio sett ing) BASS =>TREBLE => BAL ANCE => FADER => EQ.
Page - 11 z PICTURE ME NU MENU DESCRIPT ION RED Adjust level of red color. Support 50 levels. Default level is 25. GREEN Adjust level of green color. Support 50 levels. Default level is 25 BLUE Adjust level of blue color. Support 50 levels. Default level is 25.
Page - 12 Digital Tuner Note: Memory Card / USB service availability varies with areas. Please understand if Memory Card /USB service is not available in your area, the following service is not available, either. Band selection Press MODE button to select the RADIO mode.
Page - 13 Memory CARD To play MP3/ MP4/ WMA files on a Memory CARD, insert the card into the card slot (you should press the OPEN button on the panel to flip down f ront panel and insert the card into card slot.) The unit will start playing MP3/ MP4/ WMA files on t he Memory card memory autom atically.
Page - 14 Random Press the RDM button on remote to play all song tracks in random order. Press and hold f or two seconds to play all album tracks in random order. Press again to cancel. Note: This function is only for audio files. Intro Playback Press the INT button on remote to play the beginning of every track for 10 seconds in sequence.
Page - 15 Discs operations Glossary PBC (Play Back Control) Play Back Control is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback high definition of still image.
Page-16 Loading a disc 1. Turn the power on. 2. Press the Open button on the front panel to flip it down. 3. Insert the disc with the printed side fa cing upward into the slot. The panel will be c losed automatically. The DVD mode will be turned on aut omatically.
Page - 17 Repeat A-B function 1. During playback, press A-B button on the remote control at the starting point of the s ection you want to repeat (point A). 2. Press A-B button again at t he ending point of the section you want to repeat (point B). Section A-B repeating starts.
Page-18 Changing the s ubtitle language (for DV D only) Press SUBTITLE button on the RC to select the preferred language for the disc menu. When the selected language is recorded on the disc then this language will autom atically be selected. If not, the first language recorded on the disc is displayed.
Page - 19 z You should not write non-MP3 files or unneeded folders along with MP3 files on the disc otherwise it takes a long time until the unit starts to play MP3 files. z With s ome CD-R or CD-RW media, data may not be properly written depending on its manufacturing quality.
Page-20 Compatible Files 1. Audio files: MP3, WMA 2. Video files: MPEG4 TM1 3.11, 4X, 5X and 6X versions Nero Digital TM2 Real time MPEG2 MP@ML display Real time MPEG1 D1 (720X480X30/ 720X576X25) dec .
Page - 21 Commonly used rating codes: Code Description None Kid safe G General Audiences - All ages admitted PG PARENTAL GUIDANCE SUGGESTED - Some mat erial may not be suitable for children PG-13 PARE.
Page-22 Video Setup: Brightness With this menu item you can set up the brightness of the image. Contrast With this menu item you can set up the contrast of the i mage. Hue With this menu item you can set up the hue. Saturation With this menu item you c an set up the color saturation.
Page - 23 Note on Discs Only use groundless loudspeakers. Use only loudspeakers of minima l 40W att, using fewer watts ma y result in damaging your loud speakers at higher volumes. Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage the unit.
Page-24 T roubleshooting Guide Symptom Cause Solut ion General No power The car ignition is not on. The fuse is blown. If the power supply is properly connected to the car accessory switch the ignition key to “ACC”. Replace the fuse. Disc Disc cannot be loaded.
Page - 25 Specification General Power supply: 12 V DC Current consumption: Max. 10 A Maximum power output: 40W x 4 channels Compatible formats: DVD/ SVCD/VCD/ HD CD/MP3/M P4/WMA/CDDA/Picture-CD/JPEG/ CD-R/ -RW/DVD± R/±RW playback Dimensions (W x D x H) / weight: 178 x 175 x 50 mm / 1.
Ein wichtiger Punkt beim Kauf des Geräts Power Acoustik PTID-3600T (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Power Acoustik PTID-3600T noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Power Acoustik PTID-3600T - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Power Acoustik PTID-3600T reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Power Acoustik PTID-3600T erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Power Acoustik PTID-3600T besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Power Acoustik PTID-3600T verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Power Acoustik PTID-3600T. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Power Acoustik PTID-3600T gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
