Benutzeranleitung / Produktwartung P8527ESA des Produzenten Poulan
Zur Seite of 32
OWNER'S MANUAL MODEL NUMBER: P8527ESA SNO W THR O WER Alwa ys W ear Eye Pr otection During Operation IMPOR T ANT MANU AL Do Not Thr ow A way 185143 10.24.02 BY Printed in U.S .A. W ARNING: Read the Owner's Manual and fol low all W arnings and Safety In struc tions.
2 Safe Operation Practices f or Snow Thrower s IMPORT ANT : This machine is capable of amputating hands and f eet and throwing objects. F ailure to obser v e the following saf ety instr uctions could result in serious injur y or death. SAFETY R ULES W ARNING: This snow thro wer is for use on sidewalks, drivewa ys and other ground le vel surfaces.
3 PR ODUCT SPECIFICA TIONS Gasoline Capacity 4.0 Quar ts and T ype: Unleaded Regular only Oil T ype SAE 30 (abov e 40°F) (API-SF-SJ): SAE 5W -30 or 10W -30 (0° to +40°F) SAE 0W -30 (below 0°F) Oil Capacity: 22 Ounces Spark Plug: Champion RN4C (Gap: .
4 P AR TS P A CKED SEP ARA TEL Y IN CAR T ON MAINTENANCE ..................................................... 14-15 MAINTENANCE SCHEDULE ..................................... 14 SER VICE AND AD JUST MENTS ........................... 16-18 ST ORA GE .
5 ASSEMBL Y / PRE-OPERA TION Read these instructions and this man u al in its entirety bef ore you attempt to assemble or operate y our new sno w thrower . Y our new snow thro wer has been as sem bled at the f actor y with the e x cep tion of those par ts left unassembled f or shipping pur poses .
6 ASSEMBL Y / PRE-OPERA TION INST ALL A UGER CONTROL R OD (See Figs. 5 and 6) The auger control rod has the shor t loop on the end of the spring as shown. 1. Slide rubber slee ve up rod and hook end of spring into control ar m with loop opening up as sho wn.
7 ASSEMBL Y / PRE-OPERA TION INST ALL WEIGHT BA G (See Fig. 10) Though seldom required, the weight bag will re duce the ten den cy of the auger housing to ride up on hard, icy dr ifts. Should conditions require it, install as f ollows: 1. Shut off engine and wait f or all moving par ts to stop .
8 OPERA TION KNO W Y OUR SNO W THR O WER READ THIS O WNER'S MANUAL AND ALL SAFETY R ULES BEFORE OPERA TING Y OUR SNO W THRO WER. Compare the illustrations with y our snow thrower to f amiliarize yourself with the location of v arious controls and adjustments.
9 MEETS A.N.S.I. SAFETY REQUIREMENTS Our snow thro wers conform to the standards of the American National Standards Institute. FIG. 11 OPERA TION LH and RH turn triggers - used to steer the sno w thrower . Drive speed control le ver - used to select forw ard or re verse motion and speed of snow thro wer .
10 The operation of any sno w thrower can result in f oreign objects thrown into the ey es, which can result in se vere e ye damage. Alwa ys wear saf ety glasses or eye shields while oper ating your sno w thrower or perf or ming an y ad just - ments or repairs.
11 OPERA TION T O THRO W SNO W (See Fig. 16) The auger rotation is controlled by the auger control le ver located on the right side handle. • Squeeze auger control le ver to handle to engage the auger and throw sno w . • Release the auger control le ver to stop thro wing snow .
12 ENGINE OIL FILL CAP / DIPSTICK FUEL SHUT - OFF V AL VE PRIM ER SAFETY IG NI TION KEY THRO T TLE CHOKE CONTROL ST ARTER BUTT ON RECOIL ST ARTER HANDLE GAS O LINE FILLER CAP NO TE: ALL ITEMS ARE SHO WN IN THEIR TYPICAL LOCA TION. A CTUAL LOCA TION MA Y V AR Y WITH ENGINE ON Y OUR UNIT .
13 COLD ST AR T - ELECTRIC ST ARTER 1. Inser t saf ety ignition ke y into the ignition slot until it clicks . DO NO T tur n the k ey . K eep the extr a safety ignition ke y in a safe place . 2. Place throttle control in F AST position. 3. Rotate choke control to FULL position.
14 MAINTENANCE LUBRICA TION CHART GENERAL REC OM MEN DA TIONS The warranty on this sno w thrower does not co ver items that hav e been sub ject ed to operator abuse or negligence. T o receive full v alue from the warranty , operator must maintain snow thro wer as in str uct ed in this manual.
15 MAINTENANCE V -BEL TS Check V -belts f or deterioration and wear after e ver y 50 hours of operation and replace if necessary . The belts are not ad just able. Replace belts if they begin to slip from wear . (See “T O REMO VE BEL T CO VER” in the Ser vice and Adjustments section of this manual).
16 SER VICE AND ADJUSTMENTS W ARNING: T o a void serious injury , before perf orming any service or ad- just ments: 1. Be sure thr ottle is in STOP position. 2. Remove safety ignition ke y . 3. Make sure the augers and all mo v ing parts have completely stopped.
17 SER VICE AND ADJUSTMENTS T O REPLA CE BEL TS (See Fig. 23) The auger and traction drive belts are not adjustab le. If the belts are damaged or begin to slip from wear , the y should be replaced. It is recommended that the belt(s) be replaced by a qualifi ed service center .
18 ST ORA GE Immediately prepare your sno w thrower f or storage at the end of the season or if the unit will not be used for 30 da ys or more. W ARNING: Never store the sno w thro wer with gaso line .
19 Does not start 1. Fuel shut-off valv e (if so 1. T ur n fuel shut-off v alve to OPEN position. equipped) in OFF position. 2. Safety ignition k ey 2. Inser t saf ety ignition ke y . is not inser ted. 3. Out of fuel. 3. Fill fuel tank. 4. Throttle in STOP position.
20 REP AIR P ARTS SNO W THR O WER - MODEL NUMBER P8527ESA A UGER HOUSING / IMPELLER ASSEMBL Y 6 6 5 6 6 9 12 2 1 3 7 7 8 6 11 28 27 27 19 30 26 25 24 23 22 18 21 20 19 28 19 31 25 24 26 23 29 21 21 19.
21 KEY P ART NO . NO . DESCRIPTION 1 183578 Bag, Weight 2 183577 Brac ket, W eight Bag 3 74520524 Screw , Hex Head 5/16-18 x 1-1/2 4 181083 Pulley , Impeller 5 175323 Bearing Assembly , Flange 6 15537.
22 REP AIR P ARTS SNO W THR O WER - MODEL NUMBER P8527ESA CONTR OL P ANEL / DISCHARGE CHUTE 3 2 1 1 2 6 7 4 5 6 16 18 17 10 11 14 3 13 15 8 8 9 12 19 2 2 21 21 22 23 14 26 28 27 27 25 20 29 24 22 23.
23 REP AIR P ARTS SNO W THR O WER - MODEL NUMBER P8527ESA CONTR OL P ANEL / DISCHARGE CHUTE KEY P ART NO . NO . DESCRIPTION 1 183334 Knob , Lev er 2 17501010 Screw #10-24 x 5/8 3 178674 Control Assemb.
24 REP AIR P ARTS SNO W THR O WER - MODEL NUMBER P8527ESA HANDLES 5 11 12 15 7 10 33 18 19 37 34 35 20 20 21 21 6 11 5 36 13 2 5 15 11 4 4 3 3 16 17 16 23 22 38 39 24 27 26 24 25 27 40 22 17 1 4 4 14 .
25 KEY P ART NO . NO . DESCRIPTION 1 178875X479 Lev er , A uger Control, RH 2 178648X479 Lev er , T raction Drive Control, LH 3 179439 Nut, Cage 1/4-20 4 178888 Bushing, Flange 5 169675 Retainer , Hai.
26 REP AIR P ARTS SNO W THR O WER - MODEL NUMBER P8527ESA DRIVE 35 33 15 41 22 34 29 22 31 26 7 2 43 2 11 3 3 25 24 23 12 32 27 44 20 21 21 22 16 1 17 15 2 4 13 1 1 2 5 3 1 2 5 3 3 5 1 2 3 13 1 5 2 7 .
27 KEY P ART NO . NO . DESCRIPTION 1 146315 Screw , Hex Head 5/16-18 x 3/4 2 73800500 Nut, Lock 5/16-18 3 155415 W asher , Flat 4 17490508 Screw , Hex Head 5/16-18 x 1/2 5 180017 Bearing, Flange 6 180.
28 REP AIR P ARTS SNO W THR O WER - MODEL NUMBER P8527ESA CHASSIS / ENGINE / PULLEYS 10 21 6 19 17 10 21 22 23 2 1 3 4 6 7 8 9 12 13 15 27 10 25 24 18 7 6 20 14 28 6 30 29 31 31 47 48 46 40 44 10 11 4.
29 REP AIR P ARTS SNO W THR O WER - MODEL NUMBER P8527ESA CHASSIS / ENGINE / PULLEYS KEY P ART NO . NO . DESCRIPTION 1 181044 Spring, T raction Idler 2 180522 Pulley , Idler (2-1/4) 3 - - - Engine , T.
30 REP AIR P ARTS SNO W THR O WER - MODEL NUMBER P8527ESA WHEELS / DECALS 10 31 32 30 15 18 17 19 10 12 1 2 7 4 3 4 13 20 11 21 33 22 23 24 10 10 25 26 28 27 29 28 29 11 11 27 26 28 23 22 33 20 11 14 .
31 REP AIR P ARTS SNO W THR O WER - MODEL NUMBER P8527ESA WHEELS / DECALS KEY P ART NO . NO . DESCRIPTION 1 178834 Wheel Assembly (16" P o wer Steer) 2 155443 Pin, Klik 1/4 3 181843 Cov er , P ow.
giving the complete mfg. ID#, serial number and date of purchase of your product and the name and address of the authorized dealer from whom it was purchased. THIS W ARRANTY DOES NO T APPL Y T O INCIDENT AL OR CONSEQUENTIAL D AMAGES AND ANY IMPLIED WA R RAN TIES ARE LIMITED TO THE SAME TIME PERIODS ST A TED HEREIN FOR OUR EXPRESSED W AR- RAN TIES.
Ein wichtiger Punkt beim Kauf des Geräts Poulan P8527ESA (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Poulan P8527ESA noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Poulan P8527ESA - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Poulan P8527ESA reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Poulan P8527ESA erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Poulan P8527ESA besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Poulan P8527ESA verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Poulan P8527ESA. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Poulan P8527ESA gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
