Benutzeranleitung / Produktwartung TPC7020C des Produzenten POSline
Zur Seite of 28
TPC7020B.
ii Copyright © 2007. All right s reserved. No warranty of any kind is made in regard to this material, including, but not limited to, impl ied warranties of merchantability or fitness for a particular purpose.
iii L a s e r S a f e t y The portable dat a terminal complies with safety standard IEC 60825 for a Class I laser product. It also complies with CDRH as applicable to a Class II laser product.
iv T able of Content General Information .................................................................. .1 Introduction ........................................................................... . 1 Un p a ck ing .................................
1 General Information 1.1. Introduction Congratulations on your purchase of the Bluetooth Personal Data Collector ( TP C) with LCD display . Along with superior portability and visually safe scanning .
2 1.2. Unp acking The TP C package should cont ain: - 1 ea. Pocket-Sized Personal Data Collector - 1 ea. DB-9(F) serial communication cable ( For data upload and download) - 3 ea. AAA NiMH rechargeable batteries - 1 ea Power Adapter If any package content s are damaged or missing, please contact your dealer immediately .
3 1.3. Device Outline Figure 1: Pocket-Sized P ersonal Dat a Collector Scan LCD Up Key Function LED Down UAR T port.
4 1.4. Battery Care In the interests of providing t he best product performance possible, the Personal Data Collector comes with high quality , rechargeable Nickel Metal Hydride (NiMH) batte ries and a Power Adapter . After NiMH batteries are installed, connect the Power Adapter cable and the batteries charge right in the unit.
5 batteries already loaded, pleas e press and hold both v and ^ keys for 30 sec. to turn on the TP C 3. 3 pcs AAA 700mAH NiMH rechar geable batteries (Use POSline supplied rechargeable batteries only).
6 Getting S tart 2.1. Inst alling and charging battery Figure 2: Inserting Batteries Press the battery cover lock to remove the cover . Insert batteries according to t he orientation in the picture Replace the cover and lock it back.
7 2. Plug the Power Adapter connector into the socket on the side of the large end connector of t he Communication Cable. 3. Plug the Power Adapter into an outlet. While charging, the LED on the TP C lights up red. The LE D turns of f when the batteries are fully charged.
8 2.2. Power on device to collect data The Personal Data Collector is pre-programmed with a basic dat a collection program, FREET ASK th at can read and store barcodes, do simple edits, and upload dat a to a PC through the Communication Cable.
9 2.2.2. Menu operation The menu items show on LCD and a reverse item indicates current selection. Use ^ and v keys to change the item selection and confirm by pressing SCAN key . Menu tree list 1. Run T a sk 2. Delete Data 3. Setup 1. LCD Contrast 2.
1 0 2.3. Scan barcode Select 1.Run T ask under Main menu Enter into data input mode. Press SCAN key to scan barcode. Hold TP C to point at the tar geted barcode.
1 1 2.4. Key in dat a When requiring to key in data m anually , there are two modes of data entry . Mode One : Press ^ key once start edit numeric Cursor digit add by one each ^ key Press v to move cu.
12 Dat a storage The TP C can retain more than 2,000 records. T o review stored data, press the ^ key . T o end review of stored data, press the FN key .
13 2.5. Upload Dat a There are three kinds of interf ace to upload data, Bluetooth®, RS-232 and HID. Once a communication device is set up (please refer to Device Setup, Communi cation), TP C will automatically detect its readiness before st arting uploading data.
14 Device Setup Select 3.Setup under Main Menu to enter Setup sub-menu. 3.1. LCD Contrast Use v and ^ keys to adjust LCD contra st from 1 to 22. Follow by SCAN to confirm. Figure 10: LCD Contrast 3.2. Beep V olume Use v and ^ keys to select V olume from Low , Medium, Loud and Quiet.
15 3.4. Barcode Setup Use S CA N key to conrm setting and to go through dierent types of barcode, EAN/UPC, Code 39, Codabar , ITF 25, Code 128, Code 93 , RSS14 , RSS14 Ex p an d ed, RSS14 Limited. Press v and ^ keys to select On /O . Figu re 12: Barc od e Se t up 3.
1 6 Disable/Enable Xon/Xoff Control . Press SCAN to select Dis/Enable Host ACK/NAK . Press SCAN to select Set Host Response time. Press SCAN to select Dis/Enable Online Send Rec. Press SCAN to select Disable/Enable Offline Operate. Press SCAN to select 3.
17 3.6. Auto Pow er off Use v and ^ keys to select the wait time of Auto Power off. Select to the setting of 1, 3, 5, 10, 30 minutes or Disable. Follow by SCAN key to confirm. Figure 13: Auto Power Off 3.7. Default Parameter The default settings will be restored whenever performing “ User reset ” operation, the “ Comm.
18 Codabar Enable ITF 25 Enable Code 128 Enabl e Code 93 Enabl e MSI Code Enable RSS 14 Disa b le RSS14 Expanded Disable RSS14 Limited Disable User Reset While TPC is powered off, press and hold SCAN key for more than 1.5 Sec. As soon as t he green LED Li t -up , pre ss FN key .
19 Use Windows T ask Generator Before use WinT askGen for communication, power on TP C and press FN to enter the “Remote Screen”. Press ^ key to connect or disconnect with host, the green LED indicate the connect status. 1. Click Com munication Setting at the menu bar .
20 3. Click Remote Device Setting . 4. Another setting window pops up. In this window , you can remotely change TP C settings. Press OK to confirm. 5. Click Uplo ad Dat a .
21 7. Once connected, the numbers of Records and Fields inside the TP C are shown on the left top. If Upload & Delete Data is selected, those stored dat a will be deleted soon after uploading to a PC. Press Upload to start uploading. 8. When uploading is completed, all data will be displayed in the main window , and Upload Finished pops up.
22.
23 Maintenance This device provides reliable and efficient operation with minimum of care. Although a specific maint enance is not required, but as to prolong the operating life of the device, the following precautions needs to be ensured.
24 6.3.Battery The lifetime of rechargeable batteries would rely on the number of times the batteries are rechar ged. In general, we recommend charge the device at the end of each working day or when the scanner requires charging.
Ein wichtiger Punkt beim Kauf des Geräts POSline TPC7020C (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie POSline TPC7020C noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für POSline TPC7020C - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von POSline TPC7020C reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über POSline TPC7020C erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon POSline TPC7020C besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von POSline TPC7020C verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit POSline TPC7020C. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei POSline TPC7020C gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
