Benutzeranleitung / Produktwartung CD-3860UN des Produzenten Posiflex
Zur Seite of 55
1 1 Important Notice No warranty of any kind is made in regard to this material , including, but not limited to , implied warranties of mer chantability or fitness for any particular purpose.
2 2 For CE -Countri es This scanner is in conformity with CE standards. Please note that an approv ed, CE-mark ed power supply unit should be used in order to main tain CE conformance. Table of Conten ts About This Guide .............. ......... .....
3 About This Guide This progr amming guide appli es to v arious hand held scanne rs, including * Adv anced Handh eld Contact CCD Scanner , * Adv anced Middle-Range H andh eld CCD Scanner , Some settings are not av a ilable for certain models.
4 Def ault P ar amet ers This table gives the default settings of all the programmable paramet ers. The def au lt settings would be re st ored whenever the scanner re ads the "Res et" programming label in programming mode. If you wish to change any setting, scan the appropriate barcode s below .
5 Symbologies Par amet er Defau lt Decoder Selection EAN/UPC Enable Code 39 Enable Code 32 Disable Codabar Enable ITF 2 of 5 Enable MSI Disable Chinese Pos t Code Disable Code 93 Enable Code 128 Enabl.
6 GS1 Dat aB ar Expanded identifier code RX PDF417 identi fier code X Barcode Length maximum 32 Codabar Code 11 Stand ard 2 of 5 Industrial 2 of 5 Matrix 2 of 5 minimum 6 maximum 62 Code 39 Code 93 Co.
7 Pr ogr ammin g Pr oce dure Below is the programming proce dure by using barcodes in this guide. 1. Pow er u p the scanner . 2. Scan the Start of Configura t ion barcode. 3. Scan the barcode f or the desired f eature. Multiple featur es can be enabled/disabled bef o re scanning the End of Configura t ion barcode.
8 P ar ameter Se tti ng Start O f Configuration Scanner Operatio n 1. Sys tem Fun ction Setting Barcode Value Barcode Label Description -- Re set (return to f actory d ef ault) %/ Display firmw are ve.
9 Start O f Configuration 2. Interf a ce Setting Barcode Value Barcode Label Descr iption KE97 Return to USB def ault KE99 Return to RS- 232 def au lt KE87 Enable USB virtual COM (V irtual CO M driver r equir ed. Fo r ins tal lation s teps ref er to Appendix 1.
10 Start O f Configuration 3. General Scan Mode Setting Handheld Oper ation Barcode Value Barcode Label Description SM01 T rigger Mode The scanner becomes inactive as soon as the data is transmit te d. It must be trig gere d to become active ag ain.
1 1 Stand Operat ion Barcode Value Barcode Label Description SM20 IR On (Auto scan on stand) The scanner auto matically activate s scans and transmits data when detecting ob ject. SM21 IR Off (Scan by manual trigger) End Of Configur ation Start O f Configuration 4.
12 GR11 Medium (50 msec) GR10 Long (100 msec) GR14 Very Long (200 msec) GR15 Ultra long (500 msec) End Of Configur ation Start O f Configuration Beeper Volume Selection Barcode Value Barcode Label Des.
13 LB01 LED/Beep bef ore transmission Use this barcode to in dicate a “good read" before successfully tra nsmittin g the barcode data to th e host.
14 IC03 20ms IC04 50ms IC05 2ms End Of Configur ation Start O f Configuration Same Code Delay Barcode Value Barcode Label Description SD01 Same code delay time 50msec SD02 Same code delay time 100msec.
15 SD10 Same code delay time 900msec SD11 Same code delay time 1000msec SD12 Same code delay time Inf inite End Of Configur ation Start O f Configuration Connection to an Omnidirec tional Scanner Inst.
16 Not all firmware ver sions suppo rt the AUX function. Please cont act your distributor if you have any questions. End Of Configur ation Start O f Configuration Inte rfa ce Config u r a tion 1.
17 End Of Configur ation Start O f Configuration P arity Bit Barcode Value Barcode Label Description PB01 Even parity PB02 Odd parity PB03 Mark parity PB04 Space parity PB05 None parity Stop Bit Barco.
18 DB07 7 data bit DB08 8 data bit End Of Configur ation Start O f Configuration Handshaking Protoc ol Barcode Value Barcode Label Description HP01 None hand shaking HP02 ACK/NAK HP03 Xon/Xoff HP04 RT.
19 RT07 ACK/NAK respon se time infinity End Of Configur ation Start O f Configuration Message Terminator Barcode Value Barcode Label Description DT11 RS-232 message term inator—n one DT12 RS-232 mes.
20 End Of Configur ation Start O f Configuration 2. Ke yboard W edg e and USB Interf ace Setting Language Support Barcode Value Barcode Label Description KL00 International Ke yb oard mode (AL T mod e.
21 End Of Configur ation Start O f Configuration Keyboard Setting Barcode Value Barcode Label Description CP00 Capital lock on CP01 Capital lock off CP05 Function key emulatio n enable CP06 Function k.
22 End Of Configur ation Start O f Configuration 3. W ant Emulation Setting W and emulation is a standard int erf ace but requires special firmware. If nee ded, please c ontact your distributor .
23 End Of Configur ation Start O f Configuration Wand Emulation Spe ed Barcode Value Barcode Label Description WS03 W and emulation speed---normal WS04 W and emulation speed---high This option all.
24 End Of Configur ation Start O f Configuration The Symbologies 1. Codabar Par ameter Set ting Barcode Value Barcode Label Description RC02 Codabar enable RD02 Codabar disable CB05 Codabar start/stop.
25 End Of Configur ation Start O f Configuration Barcode Value Barcode Label Description CB13 No check character CB14 V alidate modulo 16,but d on’t transmit CB15 V alidate modulo 16 and t ransm it .
26 End Of Configur ation Start O f Configuration 2. Code 39 Par ameter Set ting Barcode Value Barcode Label Description RC01 Code 39 enable RD01 Code 39 disable RC13 Code 32 enable RD13 Code 32 disabl.
27 End Of Configur ation Start O f Configuration Barcode Value Barcode Label Description 3905 Code 39 check digit calculate and transmit 3906 Code 39 check digit calculate but without transmit 3907 No.
28 End Of Configur ation Start O f Configuration 3. Code 93 Par ameter Set ting Barcode Value Barcode Label Description RC08 Code 93 enable RD08 Code 93 disable DC30 Code 93 data re dundant check=off .
29 End Of Configur ation Start O f Configuration 4. Code 128 Par ameter Setting Barcode Value Barcode Label Description RC06 Code 128 enable RD06 Code 128 disable RC10 EAN-128 enable RD10 EAN-128 disa.
30 End Of Configur ation Start O f Configuration 5. Chinese P ost Code Par a meter Setting Barcode Value Barcode Label Description RC05 Chinese post code enable RD05 Chinese post code disable DC60 Chi.
31 End Of Configur ation Start O f Configuration 6. MSI/Pless y Par a meter Setting Barcode Value Barcode Label Description RC14 MSI enable RD14 MSI disable DC70 MSI data re dundant check= off DC71 MS.
32 End Of Configur ation Start O f Configuration 7. Code 11 Interf ace Setting Barcode Value Barcode Label Description RC07 Code 11 enable RD07 Code 11 disable 1101 Code 11 maximum lengt h setting 110.
33 End Of Configur ation Start O f Configuration 8. ITF 2 of 5 Par am eter Set ting Barcode Value Barcode Label Description RC04 ITF 2 of 5 enable RD04 ITF 2 of 5 disable RC09 IA T A code enable RD09 .
34 End Of Configur ation Start O f Configuration Barcode Value Barcode Label Description IT01 ITF 2 of 5 code maximum length setting IT02 ITF 2 of 5 code minimum length setting IT06 ITF 2 of 5 one fix.
35 End Of Configur ation Start O f Configuration 9. Standard 2 of 5 P ar ameter Setting Barcode Value Barcode Label Description RC22 Standard 2 o f 5 code enable RD22 Standard 2 o f 5 code disable D05.
36 End Of Configur ation Start O f Configuration 10. Industrial 2 of 5 P aramete r Setting Barcode Value Barcode Label Description RC21 Industrial 2 of 5 cod e enable RD21 Industrial 2 of 5 cod e disa.
37 End Of Configur ation Start O f Configuration 11. UPC/EAN/ JAN P arameter Setting Barcode Value Barcode Label Description RC11 EAN conv ert to ISSN/ISBN enable RD11 EAN conv ert to ISSN/ISBN disa b.
38 End Of Configur ation Start O f Configuration Barcode Value Barcode Label Description UE10 Add on 5 only UE11 Add on 2 only UE12 Add on 2 or 5 UE13 Force UPC-E to UPC-A format enable UE14 Force UPC.
39 End Of Configur ation Start O f Configuration Barcode Value Barcode Label Description UE23 T r ansmit EAN-8 check d igit enable UE24 T r ansmit EAN-8 check d igit disable UE25 T r ansmit EAN-13 che.
40 End Of Configur ation Start O f Configuration Barcode Value Barcode Label Description DC12 UPC-A data redun dant check=2 DC13 UPC-A data redun dant check=3 DC14 UPC-E data r edundant check=off DC15.
41 End Of Configur ation Start O f Configuration UE35 EAN/UPC +add-on mandatory for 9 78 / 977 bookland (Supplement require ment, not sent f or other) UE38 EAN/UPC +addon mandatory for 9 78 / 9 77 boo.
42 End Of Configur ation Start O f Configuration 13. Matrix 2 of 5 Par am eter Set ting Barcode Value Barcode Label Description RC12 Matrix 2 of 5 enable RD12 Matrix 2 of 5 disable D151 Matrix 2 of 5 .
43 End Of Configur ation Start O f Configuration 14. GS1 DataBar P aramet er Setting There are 7 kinds of barc odes in the GS1 DataBar f amily and they are categ orize d into three groups. Barc o de types in the same group use the same barcodes for set ting.
44 End Of Configur ation Start O f Configuration GS1 DataBar Limited (F ormally RSS Limited) Barcode Value Barcode Label Description RC16 GS1 DataBar Limited enable RD16 GS1 DataBar Limited di sable S.
45 End Of Configur ation Start O f Configuration GS1 DataBar Expanded (Formally RS S Expanded) Barcode Value Barcode Label Description RC17 GS1 DataBar Expand ed enable RD17 GS1 DataBar Expand ed disa.
46 End Of Configur ation Start O f Configuration Data Editing 1. Identifier Code Barcode Value Barcode Label Description IS00 Disable identifier code IS01 Enable identifier code table as factory st andard IS03 Enable identifier code table as AIM standard.
47 SET Confirm to sav e this setting (required f or reading full ASCII table and length set ting) End Of Configur ation Start O f Configuration Barcode Value Barcode Label Description CI08 Codabar ide.
48 SET Confirm to sav e this setting (required f or reading full ASCII table and length set ting) End Of Configur ation Start O f Configuration 2. Hea der and T railer Barcode Value Barcode Label Desc.
49 End Of Configur ation Start O f Configuration Appendix 1: USB Virtual COM D river Insta llation Contact your distributor to get the driv er and follow the steps below to enable USB virtual COM port. 1. Connect the han dheld scanner and the h ost (e.
50 Appendix 2: Barcode Length S etting Introduction The length of a barc ode is the nu mber of char acters it con tains, including ch eck digits. As liste d in the Default P arameter s section, each barcode type has differ ent d ef a ult length. Y ou may change the setting by the following proce dure.
51 Appendix 3: Full ASCII Code 39 Table Code 39 ASCII Hexa - code Code 39 ASCII Hexa - code Full ASCII ---NUL 00 Full ASCII ---SI Function key -----“Shift ” 0F Full ASCII ---SOH Function key -----.
52 Full ASCII Code 39 T able Code 39 ASCII Hexa - code Code 39 ASCII Hexa - code Full ASCII ---RS Function key -----“CTL(L)” 1E Full ASCII ---- 2D Full ASCII ---US Function key -----“ AL T(L)” 1F Full ASCII ---.
53 Full ASCII Code 39 T able Code 39 ASCII Hexa - code Code 39 ASCII Hexa - code Full ASCII ---< 3C Full ASCII ---K 4B Full ASCII ---= 3D Full ASCII ---L 4C Full ASCII ---> 3E Full ASCII ---M 4D.
54 Full ASCII Code 39 T able Code 39 ASCII Hexa - code Code 39 ASCII Hexa - code Full ASCII ---Z 5A Full ASCII ---i 69 Full ASCII ---[ 5B Full ASCII ---j 6A Full ASCII --- 5C Full ASCII ---k 6B Full A.
55 Full ASCII Code 39 T able Code 39 ASCII Hexa - code Full ASCII ---x 78 Full ASCII ---y 79 Full ASCII ---z 7A Full ASCII ---{ 7B Full ASCII ---| 7C Full ASCII ---} 7D Full ASCII ---~ 7E Full ASCII -.
Ein wichtiger Punkt beim Kauf des Geräts Posiflex CD-3860UN (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Posiflex CD-3860UN noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Posiflex CD-3860UN - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Posiflex CD-3860UN reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Posiflex CD-3860UN erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Posiflex CD-3860UN besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Posiflex CD-3860UN verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Posiflex CD-3860UN. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Posiflex CD-3860UN gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
