Benutzeranleitung / Produktwartung PC2525SP des Produzenten Porter-Cable
Zur Seite of 22
5.5 Horsepower 2500 PSI 2.5 GPM Pr essur e W asher Instruction manual IMPORT ANT Please make certain that the person who is to use this equipment carefully reads and understands these instructions before start- ing operations.
2- ENG D251 15 This product may not be equipped with a spark arr esting muffler . If the product is not equipped and will be used ar ound flammable materials, or on land covered with materials such as.
3- ENG D251 15 used without the safety alert symbol indicates a potentially hazardous situ- ation which, if not avoided, may result in pr operty damage . indicates a poten- tially hazardous sit- uation which, if not avoided, could result in death or serious injury .
4- ENG D251 15 RISK TO BREA THING • Some cleaning fluids contain substances which could cause injury to skin, eyes, or lungs. HAZARD HOW TO PREVENT IT WHA T CAN HAPPEN • Operate pressur e washer in a well venti- lated area. A void enclosed areas such as garages, basements ,etc.
5- ENG D251 15 RISK OF UNSAFE OPERA TION • If proper starting pr ocedure is not fol- lowed, engine can kickback causing serious hand and arm injury . HAZARD HOW TO PREVENT IT WHA T CAN HAPPEN • Become familiar with the operation and controls of the pr essure washer .
6- ENG D251 15 HOW TO PREVENT IT WHA T CAN HAPPEN HAZARD RISK OF CHEMICAL BURN • Use of acids, toxic or corrosive chemi- cals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death. • Do not use acids, gasoline, kerosene, or any other flammable materials in this product.
7- ENG D251 15 HOW TO PREVENT IT WHA T CAN HAPPEN HAZARD RISK OF HOT SURF ACES • Contact with hot surfaces, such as engines exhaust components, could result in serious burn. • During operation, touch only the control surfaces of the pressur e washer .
8- ENG D251 15 BOX CONTENTS Bagged Handle Bagged Parts Nozzle Cleaning Kit Engine Frame and Wheel Assembly High Pressure Hose Chemical Hose Engine Oil Spray Gun Knobs Saddle Bolts Quick Connect W and .
9- ENG D251 15 5. Assemble grommet kit and quick-connect nozzles as described in instructions sup- plied . 6. Add engine oil (supplied) to engine. Refer to engine manual supplied by engine manufacturer for correct pr ocedure. NOTE: There will be a slight amount of oil in the engine from factory test- ing.
10- ENG D251 15 PRESSURE WASHER High Pressur e Pump : Increases the pressur e of the water supply . Engine: Drives the high pressur e pump. High Pressur e Hose: Carries the pressurized water fr om the pump to the gun and wand. Spray Gun: Connects with wand to control water flow rate, dir ection, and pressur e.
11- ENG D251 15 TO ADJUST PRESSURE The pressur e setting is preset at the factory to achieve optimum pressur e and cleaning. If you need to lower the pressur e, it can be accomplished by these methods. 1. Back away from the surface to be cleaned. The further away you are, the less the pr essure will be on the surface to be cleaned.
12- ENG D251 15 The nozzles are housed in receptacles on the panel of the pressur e washer han- dle. Colors on the panel identify nozzle location and spray pattern. Risk of injection or injury to person. Do not direct discharge str eam toward persons, unprotected skin, eyes, or any pets or animals.
13- ENG D251 15 TO SIPHON CHEMICALS/CLEANING SOL VENTS Siphoning chemicals or cleaning sol- vents is a low pressur e operation. NOTE: Use only soaps and chemi- cals designed for pressur e washer use. Do not use bleach. 1. Press chemical hose onto barbed fitting located near high pressur e hose connection of pump as shown.
14- ENG D251 15 NOTE: W ater source must pr ovide a minimum of 5 gallons per minute at 20 p.s.i. 6. If you are applying a chemical or cleaning solution, See How T o Siphon Chemicals/Cleaning Solvents in Operation section of this manual. 7. T urn water source on.
15- ENG D251 15 MAINTENANCE WHEN PERFORMING MAINTENANCE, YOU MA Y BE EXPOSED TO HOT SURF ACES, WA TER PRESSURE, MOV- ING P ARTS, OR FIRE RESUL TING IN DEA TH. BEFORE PERFORMING ANY MAINTENANCE OR REP AIR, DISCONNECT SP ARK PLUG WIRE, LET ENGINE COOL AND RELEASE ALL WA TER PRESSURE.
16- ENG D251 15 2. Disconnect spark plug wire. 3. Pull trigger on gun handle to relieve any water pr essure. 4. Disconnect the wand from the gun. 5. Remove the high-pressure nozzle from the wand. Remove any obstructions with the nozzle cleaning tool provided and back- flush with clean water .
17- ENG D251 15 ENGINE Refer to the engine manual for the manufacturer’ s r ecommendations for storage. PUMP It is recommended that you follow these steps to protect the internal seals of the pressur e washer when storing the unit for an extended period and WHEN FREEZING TEM- PERA TURES ARE EXPECTED.
18- ENG D251 15 TROUBLESHOOTING GUIDE PROBLEM CAUSE CORRECTION Engine will not start 1. No fuel. 2. Pressure builds up after two pulls on the recoil starter or after initial use.
19- ENG D251 15 6. Air in hose. 6. T urn off the engine, then the water source. Disconnect the water source fr om the pump inlet and turn the water source on to r emove all air from the hose. When ther e is a steady stream of water present, turn water source of f.
20- ENG D251 15 PROBLEM CAUSE CORRECTION No or low pressur e (after period of nor- mal use.) W ater leaking at gun/wand connection W ater leaking at pump 1. W or n seal or packing. 2. W or n or obstructed valves. 3. W or n unloader piston. 1. W or n or broken o-ring.
21- ENG D251 15 NOTES.
LIMITED W ARRANTY PORTER-CABLE CORPORA TION warrants to the original purchaser that all products cover ed under this warranty are free fr om defects in material and workmanship.
Ein wichtiger Punkt beim Kauf des Geräts Porter-Cable PC2525SP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Porter-Cable PC2525SP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Porter-Cable PC2525SP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Porter-Cable PC2525SP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Porter-Cable PC2525SP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Porter-Cable PC2525SP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Porter-Cable PC2525SP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Porter-Cable PC2525SP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Porter-Cable PC2525SP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
