Benutzeranleitung / Produktwartung PV 360 des Produzenten Polaroid
Zur Seite of 35
1 Outline This liquid crystal projector is used to project various computer signals as well as N T S C / P AL/SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized. Features (1) Outstanding brightness The UHB lamp and high-efficiency optical system assure a high level of brightness.
FOR THE CUSTOMERS IN U.K THIS PRODUCT IS SUPPLIED WITH A TWO PIN MAINS PLUG FOR USE IN MAINLAND EUROPE. FOR THE U.K PLEASE REFER TO THE NOTES ON THIS PAGE.
W ARNING: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
4 ■ If a problem should occur. • If smoke or a strange odor arise, continued use could result in fire or electrical shock. In such case, immediately turn off the power switch and then disconnect the power plug from the power outlet. After making sure that the smoke or odor has stopped, contact your dealer for repairs.
■ Handle the power cord with care. • Do not damage, cut, process or s t ro n g l y twist the power cord. P l a c i n g heavy objects on the power cord, heating or strongly pulling the power cord can result in damage as well as fire or electrical shock.
6 ■ Do not sit or place heavy objects on this projector. • Do not sit on this projector. This could result in overturning, leading to damage or personal injury. Use special caution in households where children are present. • Do not place heavy objects on this projector.
7 ■ Avoid excessively hot locations. Do not place this projector in direct sunlight or near a hot object such as a stove, etc., because the heat could have adverse influence on the cabinet and other parts. ■ Sound volume. Set the volume at a suitable level to avoid bothering other people.
8 Checking the package Contents Make sure all of the following items are included in the package. If anything is missing, please contact your dealer. • Use the remote control in front of the remote control photoreceptor at a distance of about 5 m or less and an angle of 30 degrees to the left or right of the center.
9 Names and functions of each part (continued) Main power switch Used to turn the power on and off. : OFF : ON VIDEO IN jack S-VIDEO IN jack Mini DIN 4-pin connector VIDEO IN jack RCA jack AUDIO L/R IN jack RCA jack AC IN jack Used to connect the accessory power cord.
10 Names and functions of each part (continued) Remote control transmitter FOCUS button Used to adjust the focus of the image on the screen. (Refer to page 13.) ZOOM button Used to adjust the size of the image. (Refer to page 13.) FREEZE button Used to turn the freeze (still) image display on and off.
11 Names and functions of each part (continued) Loading the batteries Loading AA batteries into the remote control. The laser pointer of the remote control is used as a pointer. N e ver look directly into the laser beam outlet or point the laser beam at other people.
12 Installation Typical LCD Projector and Screen Installation Using the adjusters a. Distance from the LCD projector to the screen b.Distance from the lens center to the bottom of the screen (a,b : +/-10%). The projection distances shown in the diagram to the left are for full size (1,024 x 768 dots).
13 Basic operations To project 2 4 5 7 2 3 5 4 7 1 1 Turn on the main power switch of the projector [ I: ON]. • The Power indicator lights orange. 2 Press the STANDBY / ON button. • The Power indicator will blink green and then light green. • The green blinking indicates warmup.
14 Turning off the power Plug & Play Basic operations (continued) 1 Press the STANDBY/ON button for approximately 1 sec. • The Power indicator will blink orange, then the lamp will turn off. Approximately 1 sec. after that, the indicator will light orange.
15 Freeze function Basic operations (continued) 1 Press the FREEZE button. • The image being displayed will freeze. • The [ ] mark appears in the lower right corner of the screen when the Freeze function is on. 1 Press the FREEZE button. • The FREEZE function will be cancelled.
16 1 Press the MAGNIFY + button. • The center part of the image will be displayed magnified approximately 2x. 2 Press the MAGNIFY + b u t t o n . • When this button is pressed, the image will be displayed even larger. 3 Press the MAGNIFY – button.
17 Returning to the initial settings Adjustments and functions 1 Press the MENU ( ) buttons of the projector or the MENU button of the remote control. • The Menu screen will appear.
18 Adjustments and functions (contin u e d ) RGB signal input Video signal input • The menu cannot be displayed while the initial screen (“No input is detected.” or “Sync is out of range.”) is being displayed. • Tint cannot be adjusted with N-PAL, M-PAL, PAL or SECAM video signal input.
19 Adjustments and functions (contin u e d ) INPUT The INPUT menu is used to select RGB signal sync signal frequency of the monitor and the VIDEO signal. Adjustment item RGB VIDEO Adjustment description Displays the following RGB inputs fH: horizontal sync frequency fV: vertical sync frequency Sets the video signal system.
20 Adjustments and functions (contin u e d ) Adjustment item KEYSTONE MIRROR BLANK START UP P in P Adjustment description Reduces keystone Reduces keystone distortion at the bottom distortion at the top Sets vertical or horizontal inversion of the projected image.
21 Adjustments and functions (contin u e d ) OPT Communication functions, etc., can be set from the OPT menu. Adjustment item COM. SPEED COM. BITS TIMER LANGUAGE AUTO OFF SYNC ON G Adjustment description Sets the communication speed (5 steps). Sets the bit configuration for the communication data.
22 Connection to the video signal terminals Connection to the RGB signal terminal 1. Input signals 2. Signal input jacks 1. Input signals 2. Signal input jacks S-VIDEO input (mini DIN 4-pin) Color signal Ground Ground Brightness signal The priority sequence of the video input jacks is as follows.
23 Connection to the RGB signal terminal (continued) • Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector. •Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer.
24 Connection to the RGB signal terminal (continued) 4. Initial set signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, refer to pages 17 and 18 and adjust the V.POSIT and H.
25 Connecting the USB 1. Connect the projector and computer with a suitable commercially available cable. Disconnect the mouse cable from the projector. 2. Press the INPUT button of the projector or the RGB 1/2 button of the remote control and select the input where the computer is to be connected.
26 Connection to the control signal terminal Use the mouse cable provided or a PS/2 mouse cable (for IBM and compatibles). Cables for ADB mouse (Apple), bus mouse (NEC) and serial mouse are available as options.
27 Connection to the control signal terminal (contin u e d ) CONTROL signal jack ADB (Mac) mouse Projector Computer Mouse jack Mini DIN 4-pin Mouse cable (ADB) (option) Serial mouse Projector Computer Mouse jack D-sub 9-pin Mouse cable (serial) (option) Pin no.
28 Connection to the control signal terminal (contin u e d ) 2. RS232C communication (1) Turn off the projector and computer power supplies and connect with the RS232C cable. (2) Turn on the computer power supply and, after the computer has started up, turn on the projector power supply.
29 Connection to the control signal terminal (contin u e d ) The command code configuration consists of a 2-byte command and the following data. • The first byte of a command indicates the command type with 3 bits on the MSB side and the data length with 4 bits on the LSB side.
30 Connection to the control signal terminal (contin u e d ) Requesting projector status (1) Send the request code ‘20H’ + ‘ yyH’ from the computer to the projector. (2) The projector returns the response code ‘1xH’ + ‘yyH’ +data to the computer.
31 Example of system setup Cleaning the Air filter Turn power off to all devices before connecting. Refer to the instruction manual of each device before connecting.
32 Cleaning the Air filter (continued) 3 Cleaning the air filter with a vacuum cleaner 4 Installing the air filter When the air filter becomes clogged with dust, etc., the projector power may turn off to prevent the internal heat level rising. (The lamp indicator color changes to red.
33 Message table (continued) Indicators The POWER indicator, LAMP indicator and TEMP indicator light or blink in the following cases. POWER indicator Lights orange Flashes green Lights green Flashes o.
34 Specifications Dimensional Diagram · These specifications are subject to change without notice. Unit: inches Product name Liquid crystal projector Model Polaroid360 Display method Three liquid crystal panels, three primary color system. Liquid crystal Panel size 3.
35 About the warranty and after-service.
Ein wichtiger Punkt beim Kauf des Geräts Polaroid PV 360 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Polaroid PV 360 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Polaroid PV 360 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Polaroid PV 360 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Polaroid PV 360 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Polaroid PV 360 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Polaroid PV 360 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Polaroid PV 360. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Polaroid PV 360 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
