Benutzeranleitung / Produktwartung M-5 des Produzenten PLUS Vision
Zur Seite of 45
1 Copyboar d M- 5 User’ s Manual ( CD-ROM Edition ) Thank you for your pur chase of the PLUS Copyboard. Please read this User’ s Manual (CD-ROM Edition) car efully befor e use to take full advantage of the functions of this product. After you have finished reading the manual, please keep it for futur e refer ence.
2 T rademarks • Microsoft and Windows are registered trademarks or trademarks in the United States and other countries of the Microsoft Corporation. • IBM and PC/A T are registered trademarks of Inter national Business Machines Corporation of the United States.
3 T able of Contents IMPORT ANT SAFETY INFORMA TION ------------------------------------------------------------ 4 Pa ck ag ed Contents ----------------------------------------------------------------.
4 IMPOR T ANT SAFETY INFORMA TION W ARNING The unit’ s rear panel should never be opened b y any one other than a qualified ser viceperson. There are man y high voltage parts inside the unit, and touc hing them is dang erous.
5 Installation • When the cop yboard is mounted on a stand, be sure to lock the casters. • When mounting on a wall, be sure to check first that the w all surface is strong enough to support the total weight of the main unit and mount fittings ov er a long period of time (including dur ing ear thquakes).
6 Packaged Contents The contents included in the package are described below . Make sure that all items are included before starting. Copyboard (main unit) … 1 Accessories included with cop yboard • Set of markers … 2 (b lack and red) Use these special markers to dra w or write on the sheet.
7 Names of Parts Front and top Back and bottom This diagram sho ws the copyboard set with the front side f acing down. 1 . Copyboard 2 . Sheet 3 . Control panel (see page 20) 4 . DC input jack (see page 20) 5 . USB connector (type B) (see page 20) 6 .
8 Installation and Assembly Instructions To the Customer Specialized techniques are required in the w all mounting of the Copyboard. Please do not attempt any installation work unless y ou ha ve the techniques .
9 Read This Befor e Installing W ARNINGS • Be sure to install and assemble the cop yboard as instructed in this manual. Improper installation or assemb ly could lead to injur y . • At least two people should hold the cop yboard when installing and removing it.
10 Installing on a W all Par ts included in the cop yboard package: W all mount bar (1 pc), upper brack ets (2 pcs), Marker tra y (1 pc, with 2 side cov ers) and M4 x 8 marker tra y installation screw.
11 1 2 1 2 3 [Reference] Method of installation f or different wall materials Select the type of installation best suited for the w all material. If the wall is not strong enough, mount the cop yboard to columns or studs.
12 (4) Mount the 2 upper and 2 lower brac kets included with the cop yboard using M4 x 12 screws. • Both of the left and right upper brack ets are installed in the same orientation.
13 Installing on a Stand The optional stand kit f or both ver tical and horizontal installation (Model M-5-T , order code 44-562) is required to install the cop yboard on a stand.
14 3 1 2 3 M4 ⳯ 12 screws Lower bracket Upper bracket (Left) Upper bracket (Rightt) M4 ⳯ 12 screws M4 ⳯ 12 screws Fixing knobs Hexagon cap nuts (4) Mount the upper and lower brac kets using M4 x 12 screws. • The left and right upper brack ets are differ- ent.
15 Changing the image storing setting to “vertical” Assembling the stand Mounting the brackets on the copyboard Mounting the copyboard onto the stand Mounting the vertical marker tray on the copyb.
16 (3) Mount the upper and lo wer brackets using M4 x 12 screws. • The left and right upper brack ets are different. Be sure to mount them on the proper side. (4) Hook the left and right upper brac k- ets of the Copyboar d onto the up- per crossbar and fasten the lo wer brac k-ets using the fixing knobs and hexa gon cap nuts.
17 3 1 2 3 Marker tra y Partition hanger M4 screws M4 screws Mounting the copyboard on the partition Mounting the marker tray on the copyboard Mounting the partition hangers on the copyboard Mounting .
18 M4 x 8 flat head screws Hanger bracket Hook M4 x 6 screws Partition panel Hooks (3) Mount the hanger brackets to the scre w holes at the middle of the partition hangers (left and right). • Use the M4 flat head screws. • The par tition hangers hav e screw holes f or mounting hanger brac kets at both the top and middle.
19 Operation Instruc- tions This manual contains information pertaining to the copyboard. For instructions on the included softwar e, please refer to the software’ s help file. Usage Guide Saving and T ransferring images If you need to sa ve a cop y of what you hav e written on the copyboard, y ou can store it in the built-in memory .
20 Names of Main Unit Contr ols and Connectors MEMORY POWER CLEAR POSITION FEED /STOP M EM O RY P O W ER CLEAR POSITION FEED /STOP 햻 햺 햸 햵 햴 햶 햳 햲 햷 햹 The connectors are located on the bottom side of the cop yboard. When set vertically The connectors are located on the left side of the copyboard.
21 Handling CF Memory Cards •W e recommend backing up data stored in the b uilt-in memor y or on CF memor y cards onto other recording media periodically to secure the data in case of damage or loss. • Note that PLUS will accept no responsibility whatsoe ver f or loss or damage of stored data.
22 Operating the Copyboar d 1 2 3 MEMO RY POWER CLEAR POSITION FEED /STOP POWER CLEAR POSITION These operations are required when storing the dra wings on the copyboard’ s sheet in the memory and when moving the sheet surface using the buttons.
23 ME MO POWER FEED /STOP MEMORY POWER CLEAR POSITION FEED /STOP Saving the Image on the Sheet Images dra wn on the sheet can be stored either in the built-in memor y or on a CF memor y card. This is a blac k and white copyboard. Images dra wn in color are stored in blac k and white.
24 M E M O R Y W E R F E E D / S T O P POWER FEED /STOP MEMORY POWER FEED /STOP M E M O R Y P O W E R C L E A R F E E D / S T O P 䡵 Saving sheet images on a CF memory card Insert the CF memor y card into the cop yboard’ s car d slot. •F or instructions on inser ting the CF memor y card, see page 21.
25 POWER FEED /STOP CLEAR POSITION P O W E R C L E A R POSITION Clearing the built-in Memory Use this procedure to c lear all the image files in the built-in memory . Note: The procedure described below clears all the image files in the b uilt-in memor y .
26 Storing Image Files on a Computer The following describes the procedure for storing image files stored in the built-in memory or on a CF memory card onto a computer’ s hard disc and for er asing the files from the computer’ s hard disc.
27 M E M O R Y P O W E R C L E A R PO S ITIO N F E E D /S T O P To store image files from a CF memory card, insert the CF memory card into the copyboar d’ s card slot. There is no need to do this to store image files from the built-in memor y . Open “My Computer” of the computer .
28 Deleting files If the built-in memory or CF memor y card gets full, some im- age files must be deleted. (The built-in memory can be cleared completely using the CLEAR button on the cop yboard’ s control panel.) (1) Select the drive f or the built-in memor y or the CF memory card (steps to abov e).
29 “Remov e hardware” icon (example) Note: • Do not remov e the CF memor y card while files are be- ing stored (while the MEMOR Y indicator is blinking slowly). Doing so will damage the data. • The USB drive ma y not be disconnected proper ly , for e xample if the computer is in the process of chec king the status of peripherals.
30 Using a PC Car d Adapter or Memor y Card Reader/Writer (USB type) Prepare the optional or commercially a vailable memory card reader/writer or PC card adapter (for CF memory cards). 䡵 Using a PC car d adapter Insert the CF memor y card into the PC car d adapter .
31 䡵 Using a memory car d reader/writer (USB type) Insert the CF memor y card into the CF memory car d slot on the memory card reader/writer . Connect the memory card reader/writer to the computer’ s USB port. Open “My Computer” of the computer .
32 Tr oubleshooting Check the f ollowing before asking f or repairs. Symptom Po w er does not turn on when POWER b utton pressed Writing on the sheet does not erase with the eraser .
33 Specifications * 1 CF memory cards sold separately . * Please note that for quality improvement purposes, specifications and design are subject to change without prior notice.
34 Quick Calibration The procedure described below is used to adjust (calibrate) f or optimum scanning condition of the sheet surf ace. P erform this quick calibr ation procedure after replacing the fluorescent lamp or if dar k lines appear in the horizontal direction when the cop yboard is mounted on the wall.
35 Softwar e Guide This guide cov ers the installation and star ting procedure for the software contained on the CD-ROM supplied with the Copyboard. See the software Help information for details about using the software.
36 Befor e Using the Softwar e Software Contents and Overview The supplied CD-ROM contains the software and man uals descr ibed below . See the Help information of the various software progr ams for inf or mation about how to use the software .
37 Windows 98SE Personal Computer and USB Connections Driver Setup (Windo ws 98SE) Note: • Do not connect the Copyboar d with the personal computer until Step . • When using Windows Me, 2000, or XP , driver setup is not required. Mak e a USB connection with the Copyboard.
38 Open the Device Manager screen and chec k the installation. 햲 Right click [My Computer], then clic k on [Proper ties] of the menu to open the [System Proper ties] screen. 햳 Click the tab of the De vice Manager to switch to the [De- vice Manager] screen.
39 Windows Me / 2000/ XP Personal Computer and USB Connections Setup of the driver is not required when USB connections are made betw een Windows Me / 2000 / XP personal computers and the Cop yboard. When the Cop yboard is first connected to the personal computer , the driver is installed automatically .
40 Disconnecting of the Copyboar d Please perform the f ollowing procedure when disconnecting the Cop yboard dur ing Windows operation. Note: The remov al icon or displayed message will diff er depending on the v ersion of Windo ws. Should this be the case, please perf or m the remov al operation using the same procedure.
41 M-5 Setup Utility The M-5’ s operating configuration can be changed using the M-5 setup utility . Contents: Image file format, image file time stamp , auto power off time, fluorescent lamp w ar m.
42 Electr onic User's Manual The User's Manual stored on the CD-R OM is in the PDF format. [Acrobat Reader] should first be installed if not already installed in the personal computer environment. Acrobat Reader Installation Installation preparation Please close application software that is running on the personal computer .
43 PLUS Image V iewer Please install the PLUS Image Viewer to displa y on a personal computer , print or file the image data that is stored in the built-in memory or the CF memor y . Installation Installation preparation Please close application software that is running on the personal computer .
44 Deleting the Softwar e If the installed software is no longer needed, please perf or m the uninstall operation. Select [Start] → [Setting] → [Control P anel]. The Control P anel screen will be display ed. Double clic k "Add/Remove Pr ograms or Applica- tions" (which will differ depending on the OS).
45 2004 13-2127-04B.
Ein wichtiger Punkt beim Kauf des Geräts PLUS Vision M-5 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie PLUS Vision M-5 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für PLUS Vision M-5 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von PLUS Vision M-5 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über PLUS Vision M-5 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon PLUS Vision M-5 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von PLUS Vision M-5 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit PLUS Vision M-5. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei PLUS Vision M-5 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
