Benutzeranleitung / Produktwartung WL-U357v2 des Produzenten Planet Technology
Zur Seite of 31
54/108Mbps Super G W ir eless LAN USB Adapter WL-U357v2 User ’ s Manual (V ersion 1.0).
Copyright Copyright © 2006 by PLANET T echnology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retr ieval system, or translated into .
This equipment compli es with all the requir ements of DIRECT IVE 1999/ 5/CE OF THE EUROPEAN P A RLIAMENT AND THE COUNCIL OF 9 March 1 999 on radio equipment and tel ecommunication terminal Equipment .
Content s 1. Introduction ............................................................................................... 1 1.1 Features ................................................................................................ 1 1.2 Application .
1. Introduction Complying with the IEEE 802.1 1g standard, WL-U357v2 provides simple, reliable, high-speed wireless connectivity for both desktop and laptop users. By combining two, state-of-the-art te chnologies - USB 2.0 and Super G - WL-U357v2 provides up to 108Mbps dat a rate in 2.
wireless signals. For enterpris e users, the installation of multiple Access Point s to enlarge the coverage of wireless si gnals can provide wireless users with seamless network access. The Infrastructure mode is appropriate fo r enterprise-scale wireless access to a central database or provides various wir eless applications for mobile users.
General Application WL-U357v2 offers a fast, reliable, cost-e ffective solution for wireless access to the various network scenarios: 1. Remote access to corporate network for information E-mail, file transfer and terminal service.
Emission type Direct Sequence Spread Spectrum (DS SS) Technology RF Modulation OFDM with BPSK, QPSK, 16QAM, 64QAM RF Output Power 15dBm Data Rate 802.11b: 1, 2, 5.5, 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps Super G: up to 108Mbps Security 64/128bit WEP WPA-PSK / WPA2-PSK WPA / WPA2 Antenna Internal Patch Antenna Sensitivity IEEE802.
1.5 Minimum System Requirement s Before installation, please check the following requirement s with your equipment. • Pentium Based (above) IBM-compat ible PC system with one vacancy USB 1.1/2.0 port • CD-ROM drive • Windows 98SE/2000/ME/XP and Server 2003 • At least 5MBytes of free disk spac e for utility and driver installation 1.
2. Inst allation Procedure Before you proceed with the installati on, it is necessary that you have enough information about the W ireless USB Adapter . Follow the procedure described below in this chapter to install the USB adapter under W indows 98SE/ME/2000/XP .
4. Y ou can click “Browse” to specify the Destination Folder that you want to install the utility . Or keep the default setting and click ”Next” to continue. 5. Y ou can change the Program Folder name as you wis h or use the default name to continue.
6. Installation will st art copy dr iver and utility to your OS. 7. When this dialog box appear , please click “Continue Anyway”. 8.
8. Please click “Finish” to complete the installation. 9. Please click “Finish” to restart your PC 9.
2.2 Hardware Inst allation 1. After PC rest art. Please select the correct Country Domain in the pull down list and press “OK” to continue. 2. Please connect WL-U357 to your PC’ s USB port. If your PC’s USB interface is not USB 2.0, Windows will prompt you there is a High-S peed device connect to non-High-S peed USB hub.
select “Continue Anyway” to continue. 5. After the driver inst allation comp lete appears. Please click “Finish”. 11.
3. Configuration 3.1 Link Information The default page is as below afte r you launch the Utility program. Status: Shows the SSID associated, which c an be used to identify the wireless network. SSID: Shows current SSID, which must be t he same for the wireless client and AP in order for communication to be established.
3.2 Configuration This is the page where you can change the basic settings of the Access Point with the minimum amount of effort to implement a secure wireless network environment. SSID: Service Set Identifier, which is a unique name shared among all clients and nodes in a wireless network.
European (ETSI) domain and 1 to 14 for Japanese domain. Power Mode: There are 3 modes to choose. ● Continuous Access Mode (default) – the USB Dongle is constantly operating with full power and it consumes the most power. ● Maximum Power Save – the USB Dongle consumes the least power and only operates when there is wireless network activity.
Auth. Mode: 5 options are available: Open System, Share key, Auto, WPA/WPA2 , WPA-PSK/WPA2-PSK and Disable . Select Open System, Share key or Auto for WEP data encryption feature. If one of the three options is selected, it is requir ed to configure the followi ng settings from the next dropping list.
If WPA-PSK/WPA2-PSK is selected, click the co nfiguration button. The popping window is as the below. Please enter the key. The following will only be activated to allow for configuration when Open System, Share Key or Auto is enabled in “ Auth. Mode ”.
Available Network – displays the wireless networks (wireless clients and Access Points) that are in your signal range. Select any one of them to establis h communications by simply mouse double-click or click on the “ Connect ” button. Click “ Refresh ” button to start scanning fo r available network again.
3.5 About US This page displays some information about the 108Mbps Wireless Network USB Dongle utility , which includes the ve rsion numbers for Driver , Firmware and Utility . When there is new version of so f tware available for upgrade, you will be able to identify by version numbers.
19.
4. Glossary Access Point: An internetworking device that seamlessly connects wired and wireless networks. Ad-Hoc: An independent wireless LAN network formed by a group of computers, each with a network adapter.
Bit: A binary digit, which is either -0 or -1 for value, is the smallest unit for data. Bridge: An internetworking functi on that incorporates the lowest 2 layers of the OSI network protocol model. Browser: An applicat ion program that enables one to read the content and interact in the World Wide Web or Intranet.
DSSS: Direct Sequence Spread Spectrum. DSSS generates a redundant bit pattern for each bit to be transmitted. This bit pattern is called a chip (or chipping code). The longer the chip, the greater the pr obability that the or iginal data can be recovered.
Gateway : a device that interconnects netwo rks with different, incompatibl e communication protocols. HEX: Hexadecimal, HEX, consists of numbers from 0 – 9 an d letters from A – F.
Preamble Type: During transmission, the PSDU shall be appended to a PLCP preamble and header to creat e the PPDU. Two different preambles and headers are defined as the mandat ory supported long preamble and header which interoperates with the current 1 and 2 Mbi t/s DSSS specification as described in IEEE Std 802.
Throughput: The amount of data transferred su ccessfully from one point to another in a given period of time. WEP: Wired Equiv alent Privacy (WEP) is an encryption scheme used to protect wireless data communicati on. To enable the icon will prevent other stations without the same WEP key from linking with the AP.
5. T roubleshooting This section provides solutions to pr oblems usually encountered during the installation and operation of the USB adapter . Read the description below to dif fuse your doubts.
new generation and has been incorporat ed into the newly- approved security standard 802.1 1i. It supports 128, 1 92 and 256-bit encryption key length and adopts Rijndael algorithm.
Ein wichtiger Punkt beim Kauf des Geräts Planet Technology WL-U357v2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Planet Technology WL-U357v2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Planet Technology WL-U357v2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Planet Technology WL-U357v2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Planet Technology WL-U357v2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Planet Technology WL-U357v2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Planet Technology WL-U357v2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Planet Technology WL-U357v2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Planet Technology WL-U357v2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
