Benutzeranleitung / Produktwartung ICA-100W des Produzenten Planet Technology
Zur Seite of 80
Internet Camera IC A -100/IC A -100W User ’ s Manual.
ii Cop y right Copyright (C) 2003 PLANET Technology Corp. All rights reserved. The products and programs described in this User ’ s M anual are licensed products of PLANET Technology, This User ’ .
i T A BLE OF C ONTENTS CH A P T ER 1 IN T RODUC T IO N ..................................................................................... .1 IC A -100/IC A -100W Feature s ............................................................................
1 Chapter 1 Introduction This Chapter provides an overview of Internet Camera 's features and capabilities. Internet Ca m era provides a lo w cost solution f or enterprise and SOHO users to en- hance the abilit y o f net w or k environ m ent.
Broadband Router User Guide 2 Motion Detection Monitor an y suspicious m ove m ent in a speci f ic area. Wired and Wireless Net w ork Support.(IC A -100W onl y ) ICA-100 W provides both w ired and w ireless f unction. Y ou can use ICA-100 W in di ff er- ent LAN environ m ent b y si m ple m ode s w itching.
Introduction 3 T here are three settings f or the Po w er and LAN ( / W LAN ) LED to control the light illu m ination f or m onitoring purpose f ro m Nor m al / O ff / Du mm y . Please refer to the W eb Configuration section for detailed information and usage.
Broadband Router User Guide 4 begins to light up, then release the reset button and the Po w er LED w ill begin to f lash indicating ICA-100 is changing to f actor y reset. W hen f actor y reset is co m pleted the IP address w ill return to the de f ault setting as 192.
Introduction 5 Figure 1-5: T op Panel of IC A -100W Screw Hole Located on the top panel o f ICA-100 series, the scre w hole is used to connect the ca m era stand onto ICA-100 series b y attaching the scre w head on the ca m era stand into the scre w hole o f ICA-100 series.
6 Chapter 2 Ins t allation This Chapter covers the physical installation of ICA-100 Series. Requirements ICA-100 ICA-100W Network Environment L AN 10/ 100M Ethernet 10/ 100M Ethernet IEEE 802.
Installation 7 Figure 2-1: Camera Stand Hard w are Install Procedure IC A -100 1.Connect an Ethernet cable Connect one end o f an Ethernet cable to the LAN port located on the ICA-100 rear panel and attach the other end to the net w or k device (hub or s w itch).
8 Chapter 3 Configuration This Chapter provides details of the software configuration process. Login ICA-100 series m ust be con f igured through its built-in W eb-based Con f iguration. Extensive k no w ledge o f LAN w ill be help f ul in setting up.
PC Configuration 9 Figure 3-1:Home Page S y stem A dministration Clic k on “ S y stem A dministration ” f ro m the Ho m e page to access the settings re- quired f or ICA-100 series.
Broadband Router User Guide 10.
PC Configuration 11 Figure 3-2: S y stem Screen of IC A -100W Camera Name: T his f ield is used f or entering a descriptive na m e f or the device. T he de f ault setting f or the Ca m era Na m e is CS-xxxxxx, w here xxxxxx is the last six digit o f the MAC Address.
Broadband Router User Guide 12 Enter the URL o f the DDNS service provider w ho m y ou registered to. Host Name Enter the hostna m e y ou registered. User Name Enter the user na m e that used to login the DDNS w eb site. Pass w ord Enter the pass w ord o f y our account.
PC Configuration 13 Clic k on ASCII or HEX chec k box to select input f or m at as ASCII f or m at or HEX f or m at, and then input W EP k e y . T o Con f ir m the W EP k e y y ou m ust enter the data once again in the Con f ir m W EP Ke y f ield. A SCII input format: ASCII f or m at causes each character to be interpreted as an eight-bit value.
Broadband Router User Guide 14 Note: T his f unction is built-in to the LED indicators to add extra capabilities. T he three options allo w the Ad m inistrator to con f igure and ca m ou f lage the illu m ination f or the LED indicator to f alsi f y the m onitoring status.
PC Configuration 15 Image I m age m enu in the s y ste m ad m inistration contains co mm ands to provide the settings f or the i m ages captured b y ICA-100 series.
Broadband Router User Guide 16 A f ter m a k ing sure all settings in the I m age are correct, clic k on the “ Sa ve ” icon to store the settings f or ICA-100 series. Y ou can alternativel y clic k on the “ Cancel ” icon to restore all settings to the values last saved to or retrieved f ro m ICA-100 series.
PC Configuration 17 Figure 3-5: User Login Screen DateTime T he Date T i m e m enu contains co mm ands f or setting ICA-100 series' ti m e and date require m ents to provide correct in f or m ation to users w ho m ight be thousands o f m iles a w a y in the re m ote site.
Broadband Router User Guide 18 Note: Please f ind belo w N T P server w eb address f or y our re f erence to set the ti m e server. http:// www .eecis.
PC Configuration 19 Figure 3-7: T rigger Screen T he de f ault setting f or the I/O T rigger f unctions are disabled. Y ou m ust enable the I/O T rigger f irst be f ore the T riggers w ill per f or m . T here are t w o options to select f ro m the T rigger screen I/O Input 1 T rigger and I/O Input 2 T rigger.
Broadband Router User Guide 20 T he period o f ti m e bet w een each e m ail being sent to the receiver. I f the setting is at 10 seconds, a ne w e- m ail w ill be sent in 10 seconds interval to the receiver. Sending T ime T he nu m ber o f ti m es the e- m ail w ill be sent to the receiver be f ore it ter m inates.
PC Configuration 21 Figure 3-8: Upload Screen F T P Ser v er: Host A ddress: Enter the IP address o f target F T P server. Port Number: Most o f the F T P servers using port 21. I f the target F T P server uses speci f ic port, please as k the F T P server ad m inistrator to provide the in f or m ation.
Broadband Router User Guide 22 Enter a f older na m e w hich alread y exists in F T P server, then the i m ages w ill be up- loaded to the given f older. Passi v e M ode: So m e F T P servers use passive m ode. Please con f ir m this w ith the F T P server ad- m inistrator.
PC Configuration 23 Figure 3-9: Information Screen T he In f or m ation table provides detailed in f or m ation o f ICA-100 series such as the Model Na m e, Fir m w are Version, Mac Address, and IP Address. Tools T he T ools m enu contains co mm ands f or restarting ICA-100 series.
Broadband Router User Guide 24 m anuall y b y turning the lens cloc k w ise or anti-cloc k w ise to the desire i m age qualit y . Please refer to the appendix for detailed information regarding Adjust Internet Camera Focus and Replacing the Lens.
PC Configuration 25 A dministration . Vie w Image- Ja v a M ode Clic k on “ Vie w Image – Ja v a M ode ” f ro m the W elco m e screen to access the video i m ages f ro m the Internet Explorer or.
Broadband Router User Guide 26 Chapter 4 IPVie w Installation This Chapter details the installation procedure of IPView utility. Install Procedure S T EP 1 Insert the CD-ROM into the CD-ROM drive to initiate the autorun progra m .
PC Configuration 27 Figure 4-2: Welcome Screen S T EP 4 T he License Agree m ent pro m pt w ill appear as belo w . Read the details care f ull y and clic k on the “ Yes ” icon to continue w ith the installation procedure.
Broadband Router User Guide 28 Figure 4-3: License A greement S T EP 5 A pro m pt w ill appear and in the Destination Location dialog box, y ou m a y clic k on “ Next ” to accept the reco mm ended destination location or clic k on “ Bro w se ” to select another location.
PC Configuration 29 Figure 4-5: Select Program Folder S T EP 7 Please w ait until Figure 4-7 or Figure 4-8 appears. Select “ Yes, I want to restart my computer now ” and clic k on the “ Finish ” icon to restart the co m puter in Figure 4-7. I f Figure 4-8 appears, clic k on the “ Finish ” icon to co m plete the installation procedure.
Broadband Router User Guide 30 Figure 4-7: Finish Screen Launch IPVie w A f ter success f ull y installing the IPVie w , the application progra m is auto m aticall y in- stalled to Progra m FilesIPVie w . Clic k on Start M enu/Programs/IPVie w /IPVie w to launch the progra m .
PC Configuration 31 Figure 4-8: IPVie w Path Once IPVie w is executed, a Login dialog box w ill appear, y ou m ust enter the de f ault User Na m e: admin into the respective f ield and clic k on “ OK ” to log into the applica- tion.
Broadband Router User Guide 32 A f ter login, the IPVie w application is executed and its inter f ace w ill appear as f ollo w s in the de f ault List Vie w f or m at: Figure 4-10: List Vie w Format.
33 Chapter 5 Use of IP V ie w This chapter describes operation of the IPView application interface with detailed procedures for using the application. O v er v ie w IPVie w is responsible f or the m anage m ent o f previe w , con f iguration, and searching o f each ca m era.
Broadband Router User Guide 34 Note: Alternativel y y ou can clic k the Options icon as illustrated or use the hot k e y “ F10 ” . M enu Bar T he m enu bar provides easier access f or users to nav.
Advanced Configuration 35 Figure 5-3: Vie w Screen Camera “ Camera ” on the m enu bar provides options to m anage the ca m era. One can “ A dd ” additional Ca m era w ith a m axi m u m o f 16 Ca m era allo w ed f or vie w ing.
Broadband Router User Guide 36 the m enu bar select " T ools ” > "Options" and a dialog box w ill appear. Ad m inistrator can change the User Na m e and Pass w ord f or securit y settings to access the applica- tion.
Advanced Configuration 37 Figure 5-8: Warning M essage I f y ou are unsure o f the IP Address o f the ca m era y ou can clic k on the “ Bro w se ” icon, the Bro w se Camera dialog box w ill appear w ith a blan k screen as illustrated belo w .
Broadband Router User Guide 38 Figure 5-10: Search for Camera Select the ca m era w ant to add and clic k on the “ A dd ” icon. T he A dd Camera dialog box w ill appear again w ith the IP Address entered. Clic k on the “ A dd ” icon and the ca m era w ill be auto m aticall y added into IPVie w list vie w f or m at.
Advanced Configuration 39 Enter the correct User Na m e and Pass w ord to add ca m era in the list. Please note that onl y one ca m era can be added at a ti m e.
Broadband Router User Guide 40 Snap Shot T o snap shot a single i m age, highlight the ca m era y ou w ish to snap shot f ro m the list vie w f or m at. Select “ Camera ” > “ Snap shot ” f ro m m enu bar or clic k f ro m toolbar or use the hot- k e y “ F5 ” .
Advanced Configuration 41 Figure 5-14: General Screen IP A ssignment T here are t w o options to select f ro m the IP Assign m ent either M anuall y A ssign or A ssign A utomaticall y Using . Please re f er to Chapter 3 Con f iguration à S y ste m Ad m inistration à S y ste m section f or f urther details.
Broadband Router User Guide 42 Figure 5-15: IP A ssignment Screen DNS DNS (Do m ain Na m e S y ste m ) server is an Internet service that translates do m ain na m es into IP addresses. Enter at least one DNS IP Address. Please re f er to Chapter 3 Con f iguration à S y ste m Ad m inistration à S y ste m section f or f urther details.
Advanced Configuration 43 Figure 5-16: DNS Screen Wireless (Please s k ip this section i f y our ca m era is not w ireless.) Allo w s setting f or connection m ode, net w or k na m e, w ireless channel, and W EP k e y . Please re f er to Chapter 3 Con f iguration à S y ste m Ad m inistration à S y ste m section f or f urther details.
Broadband Router User Guide 44 Figure 5-17: Wireless Screen Misc Allo w s setting f or LED Control, ActiveX control location, and second port. Please re f er to Chapter 3 Con f iguration à S y ste m Ad m inistration à S y ste m section f or f urther details.
Advanced Configuration 45 Figure 5-18: M isc Screen Image I m age provides the settings f or the video i m age o f the ca m era such as brightness, contrast, saturation, resolution, co m pression, f ra m e rate, and light f requenc y .
Broadband Router User Guide 46 Figure 5-19: Image Screen User T his option allo w s s y ste m ad m inistrator to assign legal users w ho are per m itted to m onitor the ca m era f ro m the re m ote site b y A dd or Delete user.
Advanced Configuration 47 Figure 5-20: User Screen T o add a user clic k on the “ A dd ” icon and the A dd User dialog box w ill appear. Enter the User Na m e and Pass w ord into the speci f ic f ield. Select the I/O Output Control to give users the privilege o f accessing the I/O Output Control.
Broadband Router User Guide 48 Date/Time Provides t w o settings o f adjusting the ca m era ’ s ti m e and date: S y nchronized w ith T ime Ser v er or Set M anuall y . Please re f er to Chapter 3 Con f iguration à S y ste m Ad m inistration à Date T i m e section f or f urther details.
Advanced Configuration 49 Figure 5-23: T rigger1 Screen Trigger 2 Provides the settings o f f irst set I/O trigger connectors. Please re f er to Chapter 3 Con f iguration à S y ste m Ad m inistration à T rigger section f or f urther details.
Broadband Router User Guide 50 Figure 5-24: T rigger2 Screen Information Displa y s in f or m ation about the ca m era such as the m odel, f ir m w are version, MAC address, and IP address. Please re f er to Chapter 3 Con f iguration à S y ste m Ad m ini- stration à In f or m ation section f or f urther details.
Advanced Configuration 51 Figure 5-25: Information Screen Tools Proving f unctions f or reset the ca m era and update f ir m w are. Please re f er to Chapter 3 Con f iguration à S y ste m Ad m inistration à T ools section f or f urther details on reset.
Broadband Router User Guide 52 Figure 5-26: T ools Screen.
Advanced Configuration 53 Recording Figure 5-27: Recording Screen Recording File Path: T here are f our f ile paths can be set here and onl y one o f the m is w or k ing at one ti m e. It is suggested to set the m to di ff erent dis k drives. For exa m ple: set path 1 to C drive, and set path 2 to D drive.
Broadband Router User Guide 54 M anual Manuall y control the recording operation. Schedule M ode Select this option and clic k “ Advanced Setting ” f or detailed con f igurations.
Advanced Configuration 55 Figure 5-29: M otion Setting Screen.
Broadband Router User Guide 56 IPVie w Icon Description Create a ne w f ile. T he alternative hot k e y is Ctrl+N . Open an existing f ile. T he alternative hot k e y is Ctrl+O . Save a f ile. T he alternative hot k e y is Ctrl+S . List vie w f or m at.
Advanced Configuration 57 Context Sensiti v e M eun Select a ca m era in list vie w f or m at and right clic k the m ouse, a context sensitive m enu includes f eatures o f “ A dd ” , “ Delete ” , “ Property ” , “ Enable ” , “ Snap Shot ” , and recording control options w ill appears.
Broadband Router User Guide 58 Figure 5-31: Case Sensiti v e M enu in Camera Vie w Format.
59 A ppendix A Frequentl y Asked Questions Internet Camera Features Q: W hat is an Internet Ca m era? A : T he Internet Ca m era is a standalone s y ste m connecting directl y to an Ethernet or Fast Ethernet net w or k . And ICA-100 W also supports the w ireless trans m ission based on the IEEE 802.
Broadband Router User Guide 60 Q: Can the Internet Ca m era be setup as a PC-ca m on the co m puter? A : No, the Internet Ca m era can be used onl y on Ethernet and Fast Ethernet net- w or k.
Appendi x A - Troubleshooting 61 A ppendix B T rouble Shooting Q: I cannot access the Internet Ca m era f ro m a w eb bro w ser? A: I f ICA-100 series do not respond, chec k the f ollo w ing: • Machine is properl y installed, LAN or W LAN connection is OK, and it is po w- ered ON.
Broadband Router User Guide 62 Q: T here is bad f ocus on the Internet Ca m era, w hat should be done? A 1: T he f ocus m ight not be correctl y adjusted f or the line o f sight. Y ou need to adjust the Internet Ca m era f ocus m anuall y as described in Appendix E: Adjust Internet Ca m era Focus.
63 A ppendix C I/O Connectors An 8-pole connector is provided f or auxiliar y I/O connections to ICA-100 series. T he I/O connector provides the ph y sical inter f ace f or 2 digital outputs and 2 digital inputs that is used f or connecting a diversit y o f external alar m devices to ICA-100 series such as IR-Sensor and alar m rela y .
Broadband Router User Guide 64 Warning 1. W hen connecting a device to the Input connector, the device m ust be a passive co m ponent w ithout voltage and electrical current. 2. W hen connecting other devices through the Output connector, please m a k e sure the m axi m u m current o f DC 5V, 100 m A is strictl y observed.
Appendi x C - Specifications 65 A ppendix D Adjust Focus/ Replace Lens T he Internet Ca m era f eatures an exchangeable CS-t y pe lens that can be used f or di ff erent applications as necessar y .
Broadband Router User Guide 66 Replace the Lens Since the Internet Ca m era is designed w ith a CS- m ount, the lens equipped w ith the Internet Ca m era can be replaced w ith an y standard C or CS lens co mm onl y used w ithin the surveillance industr y .
Appendi x C - Specifications 67 A ppendix E Ins t all Xplug Control Utilit y Install on Web Ser v er S T EP 1 Cop y xplug.ocx to the ho m e director y o f a w eb server. S T EP 2 Log on the Ho m e page o f ICA-100 series, clic k on the “ S y ste m Ad m inistration ” lin k .
Broadband Router User Guide 68 1. Clic k on Start M enu/ Run. 2. Enter “ D:ActiveXxpctrl.exe ” in the appeared box, w here “ D ” is the letter o f y our CD-ROM drive. 3. Clic k on “ OK ” button. S T EP 3 T he W elco m e screen w ill appear.
Appendi x C - Specifications 69 S T EP 5 Clic k on the “ Finish ” button to co m plete Setup o f the Xplug Control Utilit y progra m f or the W ireless Internet Ca m era.
Broadband Router User Guide 70.
Appendi x C - Specifications 71 A ppendix F S pecification ICA-100 ICA-100W Video Specification Resolution 640 x 480 pixel Sensor 1/3 ” color CMOS sensor Gain control Auto m atic Exposure Auto m atic W hite Balance Auto m atic Shutter Electronics 1/60 ~ 1/15000 sec Mini m u m Illu m ination 2.
Broadband Router User Guide 72 M anagement Co mm unication m edia 10/100Mbps Ethernet 10/100Mbps Ethernet, IEEE 802.11b w ireless Co mm unication proto- col H TT P, F T P, T CP/IP, UDP, ARP,ICMP, BOO .
Appendi x C - Specifications 73 A ppendix G Glossar y of T erms NUMBERS 10B A SE- T 10BASE- T is Ethernet over U T P Categor y III, IV, or V unshielded t w isted-pair m edia. 100B A SE- T X T he t w o-pair t w isted- m edia i m ple m entation o f 100BASE- T is called 100BASE- T X.
Broadband Router User Guide 74 net w or k device that auto m aticall y assigns an IP address to an y device that requests f or it. DNS Do m ain Na m e S y ste m is an Internet service that translates do m ain na m es into IP addresses. Since do m ain na m es are alphabetic, the y 're easier to re m e m ber.
Appendi x C - Specifications 75 f or internal usage onl y . Internet T he Internet is a globall y lin k ed s y ste m o f co m puters that are logicall y connected based on the Internet Protocol (IP). T he Internet provides di ff erent w a y s to access private and public in f or m ation w orld w ide.
Broadband Router User Guide 76 W A N – ( w ide area net w or k ): T he co m puters are in di ff erent geographic locations and are connected b y telephone lines or radio w aves. NWa y Protocol A net w or k protocol that can auto m aticall y negotiate the highest possible trans m ission speed bet w een t w o devices.
Appendi x C - Specifications 77 stations. Subnet mask In T CP/IP, the bits used to create the subnet are called the subnet m as k . T T CP/IP T rans m ission Control Protocol/Internet Protocol is a w idel y used transport protocol that connects diverse co m puters o f various trans m ission m ethods.
Ein wichtiger Punkt beim Kauf des Geräts Planet Technology ICA-100W (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Planet Technology ICA-100W noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Planet Technology ICA-100W - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Planet Technology ICA-100W reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Planet Technology ICA-100W erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Planet Technology ICA-100W besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Planet Technology ICA-100W verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Planet Technology ICA-100W. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Planet Technology ICA-100W gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
