Benutzeranleitung / Produktwartung SGSW-24040R des Produzenten Planet
Zur Seite of 308
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 1 User ’ s Manual WGSW -24040 / WGSW -24040R 24-Port 10/100/1000Mbps Layer 2 Managed Switch SGSW -24040 / SGSW -24040R 24-Po.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 2 T rademarks Copyright © PLANET T echnology Corp. 2008. Contents subject to which revision without prior notice. PLANET is a registered trademark of PLANET T echnology Co rp. All other trademarks belong to their respectiv e owners.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 3 T ABLE OF CONETNTS 1. INTR ODUTION ................................................................................................................. ... 12 1.1 Packet Content s .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 4 4. WEB CONF IGURA TION ...................................................................................................... 42 4.1 Main WEB P A GE ..........................
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 5 4.6 VL AN ....................................................................................................................... ..................................... 93 4.6.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 6 4.10.5 802.1X and MAC-Based Authentication S tatistics .......................................................................... ................. 150 4.10.6 Windows Platform RADIUS Server Conf iguration .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 7 4.16.4 S tack Port S tate Ovewview ............................................................................................... ............................... 204 4.16.5 S tack Example .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 8 Mirror Mode .................................................................................................................... ..................................... 228 6.3 Link Aggreg ation Command .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 9 RSTP S tat istics ................................................................................................................ .................................... 250 RSTP mC heck.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 10 Dot1x S tat istics ............................................................................................................... ..................................... 269 Dot1x Cli ents .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 11 S tack SID Swap................................................................................................................. .................................. 288 S tack SID Delect .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 12 1. INTRODUTION The PLANET Layer 2 Managed Gigabit S witch series - WGSW-24040 / WGSW-24040R / SGSW-24040 / SGSW -24040R are.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 13 QoS and Network Security features make it to meets the needs of effective data traffic control for both Campus and Enterprise, such V oIP , video streaming and multicast ap plication.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 14 Reliability S tacking Management The SGSW Series Managed S witch provides a switch stacki ng function to manage up to 16 switches using a singl e IP address.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 15 1.4 Product Features ¾ Physical Port WGSW-24040 / WGSW-24040R 24-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 4 m.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 16 ¾ Quality of Service 4 priority queues on all s witch ports. Supports for strict priority and weighted round robin.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 17 1.5 Product S pecification Product WGSW-24040 WGSW-24040R SGSW-24040 SGSW-24040R Hardware Specification Copper Ports 24 10/.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 18 Port trunking IEEE 802.3ad LACP / S tatic T runk Support 8 groups of 8-Port trunk support QoS T raffic classification based, S trict priority and WRR 4-level priority for switching - Port Number - 802.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 19 2. INSTALLATION This section describes the hard ware features and installation of the Managed Switch on the desktop or rack mount. For easier management and control of the Managed S w itch, familiarize yourself with its di splay indicators, and ports.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 20 ■ Reset button At the left of front p anel, the reset button is designed for reboot the Managed S witch without turn off and on the power .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 21 2.1.2 LED Indications The front panel LEDs indicates instant stat us of port links, data activity , system oper ation, S tack status and system power , he lps monitor and troubleshoot when needed.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 22 ■ 1000Base-SX/LX SFP interfaces (Shared Po rt-21~Port-24) LED Color Function Lights: T o indicate the link through that S.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 23 Lights: T o indicate the link through that port is successfull y established with speed 10Mbps or 100Mbps Blink : T o indicate that the switch is actively sending or receiving data over that port.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 24 SGSW-24040 Rear Panel Figure 2-7 Rear pa nel of SGSW-24040 SGSW-24040R Rear Panel Figure 2-8 Rear pa nel of SGSW-24040R ■.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 25 Figure 2-9 SGSW -24040 / SGSW-24040R S tack Ports ■ DC Power Connector The rear panel of the WGSW-24040R and SGSW-24040R cont ains a power switch and a DC po wer connector , which accepts DC power input voltage from -30V to -60V DC.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 26 2.2 Inst all the Switch This section describes ho w to inst all your Managed S witch and make connections to the Managed Switch. Please read the following topics and perform th e procedures in the order bei ng pres ented.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 27 Step5: Supply power to the Managed S witch. Connect one end of the power cable to the Managed Switch. Connect the power plug of the po wer cable to a standard wall outlet. When the Managed Switch receives po wer , the Po wer LED should remain solid Green.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 28 Figure 2-12 Mounting SGSW-2840 in a Rack Step6: Proceeds with the steps 4 and steps 5 of session 2.2.1 Desktop Installation to connect the network cabling and suppl y power to the Managed Switch.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 29 Approved PLANET SFP T ransceivers PLANET Managed Switch supports both Single mode and Multi-mode SFP transceiver .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 30 Figure 2-14 Pull out the SFP transceiver Never pull out the module without pull the handle or the push bolts on the module. Direct pull out the module with violent could damage th e module and SFP module slot of the Managed Swit ch.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 31 2.2. 4 Connecting DC Power Suppl y – WGSW-24040R / SGSW -24040R The WGSW-24040R and SGSW-24040R support -48VDC power inpu t, connect the po wer cable to the switch at the input terminal block.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 32 2.3 St ack Inst allation SGSW-24040 / SGSW -24040R The SGSW-24040 series Managed Switch provides a s witch stacking function to manage up to 16 switches using a single IP address.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 33 2.3.1 Connecting St acking cable Before attempting to connect sta cking ports, verify that you have the required stack cables. The following cables are used to connect stacked switches: • CB-STX50 : 50cm, Short stack cable –used to connect adjacent SGSW switches.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 34 STEP-5 : Once the stack start operation, the St a ck master be automaticall y elected without any configure. The S tack master is indicated by a lit green “ Master ” LED on the front panel.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 35 1. The stack switch with least priority ID or MAC Address number will become Master . Only Master switch’s management interface (console, telnet, web and SNMP) is accessible.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 36 3. SWITCH MANAGEMENT This chapter explains the methods that yo u can use to configure management access to the Manag ed Switch.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 37 3.2 Management Access Overview The Managed Switch gives you the flexibility to access and manage it using an y or all of th.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 38 Figure 3-1 Console management Direct Access Direct access to the administration conso le is achieved by directly connecting a terminal or a PC equ ipped with a terminal-emulation program (such as HyperT erminal ) to the Managed S witch console (serial) port.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 39 3.4 Web Management The Managed Switch offers management features that allow us ers to manage the Man aged Switch from anywhere on the network through a standard bro wser such as Microsoft Internet Ex plorer .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 40 3. 5 SNMP-Based Network Management Y ou can use an external SNMP-based appl ication to configure and manage the Manage d Switch, such as SNMPc Network Manager , HP Openview Network Node Management (NN M) or What ’s Up Gold.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 41 2. St art the T elnet program on a PC and connect to the Managed Switch. The management interface is exactl y the same with RS-232 console management.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 42 4. WEB CONFIGURATION This section introduces the configur ation and functions of the Web-Based management.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 43 Logging on the s w itch 1. Use Internet Explor er 6.0 or above Web browser . Enter the factory-default IP address to access the W e b interface. The factory-default IP A ddress as follow ing: http://192.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 44 Figure 4-1-3 Default main page Now , you can use the Web manageme nt inte rface to continue the switch manageme n t or manage the Managed Switch by Web interface.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 45 4.1 Main WEB P AGE The WGSW / SGSW Managed Switch provides a Web-based bro wser interface for configuring and managing it. This interface allows you to access the Manage d Switch using the Web browse r of your choice.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 46 Main Menu Using the onboard web agent, you can d efine system paramete rs, manage and control the Managed Switch, and all its ports, or monitor network conditions.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 47 4.2 System Use the System menu items to display and config ure basic administrative details of the Manage d Switch.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 48 4.2.1 System Information The System Info page provides information for the current device information. System Info page help s a switch administrator to identify the hardware MAC address, software version and system uptime.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 49 : Click to refresh the page; any changes made locally will be undone. For the SGSW series stackable switch, the System Information p age add additional colum n to identify the current switch ID of stack member switches in a stack group.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 50 4.2.2 IP Configuration The IP Configuration includes the IP Addr ess, Subnet Mask and Gateway . T he Configured column is used to vie w or change the IP configuration.Fill up the IP Address, Subnet Mask and Gate way for the device.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 51 : Click to save changes. : Click to undo any changes made locall y and revert to previously saved values. 4.2.3 User Authentication This page allows you to configure the system password requir ed to access the web pages or log in from CLI.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 52 4.2.4 SNTP Configuration In the System sub-function menu, you can s ee the SNTP Configuration (see Figure 4-4 ), by which you can configure the time settings for the Managed Switch.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 53 It is recommended that you research an y time serv er selection to ensure that it can meet your specific time server requirements. Any NTP ti me server selection should be evaluated to determine if the server in question meets yo ur specific time server requirements.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 54 4.2.6 TFTP Firmware Upgrade The Firmware Upgrade page provides the functions to allow a user to update the Managed S witch firmware from the T FTP server in the network.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 55 Figure 4-2-8 TFTP Firmware upgrade pop-up message Figure 4-2-9 Firm ware Upgrade pop-up message 4. Click “ OK ”, the Switch will start the TFTP upgrade procedure. 5. Please check your TFTP server application to conf irm the TFTP file is well transmit to the Switch.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 56 4.2. 7 Configuration Save This function allows backup and rel oad the current configuration of t he Managed S witch to the local management station. The screen in Figure 4-2-10 appea rs.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 57 Figure 4-2-12 File save screen 4.2. 8 Configuration Upload This function allows backup and rel oad the current configuration of t he Managed S witch to the local management station.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 58 Figure 4-2-14 Windo ws file selection menu popup 2. Select on the configur ation file then click “ Upload ”, the bottom of the bro wser shows the upload status. 3. After down, the main screen appears “ T ransfer Comp leted ”.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 59 4.2. 9 Factory Default The Factory Reset button can reset the VD SL2 Switch back to the factory default mode. Be aware that the entire configuration will be reset; include the IP address of the VDSL2 Switch .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 60 4.2.1 0 System Reboot The Reboot page enables the device to be rebooted from a remote loca tion. Once the Reboot button is presse d, user have to re-login the WEB interface about 60 secon ds later , the screen in Figure 4- 2-16 appear s.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 61 Example 1: Save Current Configuration setting T o save all app lied changes and set the current configurati on as startup configuration. The st artup-configuration file will be load automatically across a system reboot.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 62 Example 2: Do w nloading Sy stem Software from a Server When downloadin g runtime code, you can spec ify the destinatio.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 63 • If you do wnload to a new destinati on file, go to the System / File / Set Start-Up menu, mark the operat ion code file used at startup, and click Apply . • T o start the new firmware, reboot the system via the System / Reset menu.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 64 configuration file. T o use the new setti ngs, reboot the system via the System / Reset menu. Example 4: Saving or Restoring Configuration Settings Y ou can upload/do wnload configuration settings to/from a TFTP server .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 65 4.3 Simple Network Management Protocol 4.3.1 SNMP Overview The Simple Network Management Protocol (S NMP) is an applic ation layer protocol that fa cilitates the exchange of management information between network devices.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 66 The SNMP System Configuration screen in Figure 4- 3-1 appears. Figure 4-3-1 SNMP System Configuration page screenshot Object Description • Mode Indicates the SNMP mode operation.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 67 4.3.3 SNMP System Information Configuration The switch system information is provided h ere.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 68 Figure 4-3-3 SNMP T rap Configuration page screenshot The page includes the following fields: Object Description • T rap Mode Indicates the SNMP trap mode operation. Possible modes are: • Enabled : Enable SNMP trap mode operation.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 69 • T rap Probe Security Engine ID Indicates the SNMP trap probe security engine ID mode of operation. Pos sible values are: • Enabled : Enable SNMP trap probe security engine ID mode of operation.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 70 to 126. • Security Model Indicates the security mode l that this entry should belong to. Possible sec urity models are: • any : Accepted an y security model (v1|v2c|usm).
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 71 • Community Indicates the community access string to permit access to SNMPv3 agent. The allowed string length is 1 to 32, and the allowed content is the ASCII characters from 33 to 126.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 72 characters from 33 to 126. 4.3.5.4 SNMPv3 Users Configuration Configure SNMPv3 users table on this page. The entry index key are Engine ID and User Name. The SNMPv3 Users Configur ation screen in Figure 4-3-7 appe ars.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 73 protocol. • SHA : An optional flag to indicate that this user using SHA authentication protocol. The value of security level cannot be mo dified if entry already exist. That means must first ensure that the value is set correctly .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 74 • View T yp e Indicates the view type that this entry should bel ong to. Possible view type are: • included : An optional flag to indicate that this view subtree should be included.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 75 Figure 4-3-9 SNMPv3 Users-NEW page screens hot Once the new SNMPv3 user be successed add a nd be assign to a snmp group, this entry will sho ws in the users table.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 76 Figure 4-3-1 1 SNMPv3 Grou ps-NEW p age screenshot.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 77 4.4 Port Management Use the Port Menu to display or configure the Manage d Switch's ports.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 78 The page includes the following fields: Object Description • Port This is the logical port number for this ro w . • Link The current link state is displayed graphicall y .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 79 • Enabled : Link up and link down power savings en abled. • T o t al Power Usage T otal power usage in board, measur ed in percent. When set each port to run at 100M Full, 100M Half, 10M Full, and 10M Half-speed modes.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 80 The displayed counters are: Object Description • Port The logical port for the settings contained in the same row . • Packets The number of received and transmitted packets per port.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 81 The page includes the following fields: Receive T otal and T ransmit T otal Object Description • Rx and Tx Packets The number of received and transmitted (good and bad) packets • Rx and Tx Octet s The number of receiv ed and transmitted (g ood and bad) b ytes.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 82 T ransmit Error Counters Object Description • Tx Drops T he number of frames dropped due to output buffer congestion. • Tx Late/Exc. Coll. The number of frames dropped due to excessive or late co llisions.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 83 Mirror Port Configuration The Port Mirror Configuration screen i n Figure 4-4-5 and Figure 4-4-6 ap pears.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 84 SGSW St acka ble Switch The SGSW St ackable s witch supports port mirror function over stack switch.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 85 4.5 Link Aggregation Port Aggregation optimizes port usage by linking a group of ports together to fo rm a sing le Link Aggregated Groups (LAGs). Port Aggregation multiplies the bandwidth bet ween the devices, increas es port flexibility , and provides li nk redundancy .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 86 The Link Aggregatio n Control Protocol (LACP) provides a standardized means for e xchanging information bet ween Partner Systems that require high speed redu ndant links. Link aggregation lets you group up to eight consecutiv e ports into a single dedicated connection.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 87 4.5.1 St atic Aggreg ation Configuration This page is used to configure the Aggregation hash mode and the aggregation group.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 88 Figure 4-5-3 Aggre gation Group Config uration page screenshot The page includes the following fields: . Object Description • Locality Indicates the aggregation group type.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 89 4.5.2 LACP Configuration Link Aggregati on Control Protocol (LACP) - LACP LAG negoti ate Aggregated Port links with other LACP ports located on a different device.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 90 each second, while Passive will wait for a LACP packet from a p artner (speak if spoken to). 4.5.3 LACP System S tatus This page provides a status overview for all LACP instances.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 91 Figure 4-5-6 LACP Port S tatus page screenshot The page includes the following fields: Object Description • Port The switch port number . • LA CP 'Y es' means that LACP is enabled and the po rt link is up.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 92 4.5.5 LACP st atistics This page provides an overview for LACP statistics for all ports.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 93 4.6 VLAN 4.6.1 VLAN Overview A Virtual Local Area Net work (VL AN) is a network topology configured according to a logical schem e rather than the physical layout.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 94 4.6.2 IEEE 802.1Q VLAN In large networks, routers are used to is olate broadcast traffic for each subnet into separate domains.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 95 ports and work normally . Any port can be configured as either tagging or untagging. T he untagging feature of IEEE 802.1Q VLAN allow VLAN to work with legacy switches that don’t recogn ize VLAN tags in packet headers.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 96 Adding an IEEE802.1Q Tag Dest. Addr . Src. Addr . Length/E. t ype Data Old CRC Dest. Addr . Src. Addr . E. type Ta g Length/E. type Data New CRC Priority CFI VLAN ID ■ Port VLAN ID Packets that are tagged (are carrying the 802.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 97 VLANs, and any intermediat e network devices or the host at the other end of the connecti on supports VLANs.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 98 4.6.3 VLAN Basic Information The VLAN Basic Information page displays basic informatio n on the VLAN type supported by the Managed Switch. The VLAN Basic Information screen in Figure 4-6-1 appears.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 99 4.6.4 VLAN Port Configuration This page is used for configuring the Managed Switch port VLAN. The VLAN per Port Configuration page contains fields for managing ports that are part of a VLAN.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 100 The Managed Switch supports multiple VLA N tags and can ther efore be used in MAN applications as a provider bridg e, aggregating traffic from numerous inde pendent customer LANs into the M AN (Metro Access Network) space.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 101 untagged traffic will be dropped. • Ingress Filtering Enable ingress filtering for a p ort by checking the box.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 102 4.6.5 VLAN Membership Configuration Adding St atic Members to VL A Ns (VLAN Index) Use the VLAN S tatic T able to configure por t members for the selecte d VLAN index. Assign ports as tagged if they are connected to 802.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 103 4.6.6 Private VLAN Configuration Overv iew When a VLAN is configured to be a private VLAN, commun ication between ports within that VLAN can be prevented.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 104 The page includes the following fields: Object Description • Port The switch interface. Displays private VLAN port types. Isolated A single stand-alone VLAN that contains one promiscuous port and one or more isolated (or host) ports.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 105 4.7 Rapid Sp anni ng T ree Protocol The S panning T ree protocol can be us ed to detect and disable ne t work loops, and to provide backup links between switches, bridges or routers.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 106 uses the information in the frame to calculate a BPDU, a n d, if the topology changes, initiates a BPDU transmission.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 107 Switch Blocking Listening Learning Forwarding Disable Figure 4-7-1 STP Port S tate T ransitions Y ou can modify each port state by using management software .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 108 Priority A relative priorit y for each switch – lower numbers give a higher priorit y and a greater chance of a given s .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 109 the Root Bridge, the set Hello T ime will be used if and when your S witch becomes the Root Bridge. The Hello T ime cannot be longer than the Max. Age. Otherwise, a configuration err or will occur .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 11 0 Bridge ID = 15 Port 3 Port 1 Port 2 A Bridge ID = 20 Port 1 Port 2 Port 3 C Bridge ID = 30 Port 1 Port 2 Port 3 B LAN 1 L.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 111 4.7. 1 RSTP System Configuration This page allows you to configure RSTP system settings.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 11 2 Compatible – Classis STP ( 802.1d) : Provides a single path between end stations, avoiding and eliminating loops. The Gigabit Ethernet Switch implement the Rapid Sp a nning Protocol as the default spanning tree protocol.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 11 3 4.7. 3 RSTP Port Configuration This page allows the user to inspect the current RSTP port configurations, and possi bly change them as well. This page contain settings for aggregations and phys ical ports.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 11 4 path cost ports are chosen as forwarding ports in favor of higher p ath cost ports. V alid valu es are in the range 1 to 20000000 0. • Priority Controls the port priority .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 11 5 Port T ype Link T ype IEEE 802.1w-2001 Ethernet Half Duple x Full Duplex Trunk 2,000,000 1,000,000 500,000 Fast Ethernet .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 11 6 4.7. 4 RSTP Port S tatus This page displays the RSTP port st atus for port ph ysical ports in the currently selected switch. The RSTP Port S tatus screen in Figure 4-7-10 appears.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 11 7 • Stat e The current RSTP port state. The port st ate can be one of the following values: • Disabled • Blocking • Learning • Forwarding • Non-STP . • Bridge The RSTP Bridge instance (VLAN ID).
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 11 8 4.8 Quality of Service 4.8.1 Underst and QOS Quality of Service (QoS) is an advanced traffic prioritization feature that allows you to establish control over network traffi c.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 11 9 3. Create a QoS profile which associates a service level and a classifi er . 4. Appl y a QoS profile to a port(s). 4.8.2 QoS Control Li st Configuration This page lists the QCEs for a given QCL.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 120 • T ype V alue Indicates the value accord ing to its QCE type. • Ethernet T ype : The field shows the Ethernet T ype value. • VLAN ID : T he field shows the VLAN ID. • TCP/UDP Port : T he field shows the TCP/UDP port range.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 121 The page includes the following fields: Object Description • QCE T ype Select the availabl e type for the specific QCE. • Ethernet T ype : Matches the received frame's EtherTy pe against the QCE Key .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 122 Figure 4-8-3 Port QoS Configuration page screens hot The page includes the following fields: Object Description • Number of Classes Configure the number of traffic classes as "1", "2", or "4".
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 123 4.8.4 QCL Configuration W izard This handy wizard helps you set up a QCL quickly .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 124 Figure 4-8-6 Set up Policy R ules page screenshot The page includes the folling fileds: Object Description • QCL ID Frames that hit this QCE are set to match this specific QCL.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 125 4.8.4.2 Set up T ypical Network Application Rules Set up the specific QCL for different t ypi cal network application quality cont rol.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 126 • User Definition Indicates the user definition that applies to the specific QCE. The user definitions are: • Ethernet T ype: S pecif y the Ethernet T ype filter for this QCE.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 127 4.8.4.3 Set up T oS Precedence Mapping Set up the traffic class mapping to the precedence part of T oS (3 bits) when receiving IPv4/IPv6 packets. The screen in Figure 4-8-10 appears.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 128 4.8.4.4 Set up VLAN T ag Priority Mapping Set up the traffic class mapping to the User Priority value (3 bits) when receiving VLAN tagged packets. The screen in Figure 4-8-1 1 appears.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 129 4.8.5 QoS St atistics This page provides statistics for the different queues for all sw itch ports. The ports belong to the currentl y selected stack u nit, as reflected by the page header .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 130 4.8.6 Bandwid th Control Configure the switch port rate limit for Pol icers and Shapers on this page. The settings relate to the c urrently selected stack unit, as reflected by the page header .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 131 4.8.7 Storm Control Configuration S torm control for the s witch is configured on this page. T here three types of storm rate control: Unicast storm rate control Multicast storm rate control Broadcast storm rate control.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 132 4.9 Multicast 4.9.1 IGMP Snooping The I nternet Group Management Protoc ol (IGMP) lets host and routers share information about multicast groups memberships.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 133 Figure 4-9-2 Multicast flooding Figure 4-9-3 IGMP Snooping multicast stream control.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 134 IGMP V ersions 1 and 2 Multicast groups allow members to join or leave at any time. IGMP provides the method for members and multicast routers to communicate when joining or leaving a multicast group.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 135 message, and query messag es that ar e specific to a given group. The states a computer will go through to join or to leav.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 136 4.9.2 IGMP Snooping Configuration This page provides IGMP Sno oping related configuration. Most of the settings are global, whereas t he Router Port configuration is r elated to the currently selected stack unit, as refl ected by the page header .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 137 4.9.3 IGMP Port Related Configuration This page provides IGMP Sno oping related configuration. Most of the settings are global, whereas t he Router Port configuration is r elated to the currently selected stack unit, as refl ected by the page header .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 138 4.9.4 IGMP Snooping S tatus This page provides IGMP Snooping status. The status relate to the currently selected stack unit, as reflected by the page header . The IGMP Snooping status screen in Figure 4-9-7 appear s.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 139 4.9.5 Multicast Address T able The Multicast Address T able screen i n Figure 4-9-8 appears. Figure 4-9-8 Multicast Addres s T able page screenshot The page includes the following fields: Object Description • Delete Check to delete the entry .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 140 4.10 IEEE 802.1X Network Access Control Overview of 802.1X (Port-Based) Authentication In the 802.1X-world, the user is called the supp licant, the switch is the authenticator , and the RADIUS server is the authentication server .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 141 4.10.1 Underst anding IEEE 802.1X Port-Based Authentication The IEEE 802.1X standard defines a client-server-b ased access cont rol and authenticatio n protocol that restricts unauthorized clients from connecting to a LAN through publicly accessibl e ports.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 142 z Switch (802.1X device) —controls the physical access to the net work based on the authentication status of the client.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 143 Figure 4-10-2 EAP message ex change Ports in Authorized and Unauthorized States The switch port state determines whether or not the client is granted acc ess to the network.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 144 4.10.2 802.1X System Configuration This page allows you to configure the IEEE 802.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 145 • Reauthentication Enabled If checked, clients are reauthenticated after the interval specified by the Reauthentication Period. Rea uthentication for 802.1X-enabled ports can be use d to detect if a new device is plugged into a switch port.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 146 4.10.3 802.1X and MAC-Based Auth entication Port Configuration When 802.1X is enabled, you need to configure the parameters for the authentication process t hat runs bet ween the client and the switch (i.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 147 • Port The port number for which the configuration below applies. • Admin St ate Sets the authentication mode to one of the following options (only used when 802.1X or MAC-based authe ntication is globally enabled ): • Aut o: Requires an 802.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 148 The stackswitch is "born" with a pool of state-machines, from which all ports draw whenever a new client is seen on the port.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 149 4.10.4 802.1X Port St atus This page provides an overview of the cu rrent IEEE 802.1X port states for the select ed switch. The 802.1X Port S tatus screen in Figure 4-10-5 appears.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 150 EAPOL frame for port-bas ed authenticatio n, and the source MAC addr ess from the most recently received frame from a new client for MAC-based authentication. 4.10.5 802.1X and MAC-Based Authentication St atistics This page provides detailed IEEE 802.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 151 The selected port belongs to the currently select ed stack unit as reflected by the table header . EAPOL Counters These counters are not availa ble for MAC-based ports. Supplicant frame counter statistics.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 152 RADIUS Counters RADIUS Server frame counter statistics. For MAC-based ports there are two tables containing RADIUS counters. The left-most shows a summary of all RADIUS counters on this port.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 153 MAC-based: Counts all the RADIUS packets sent from the switch towards the RADIUS server for a given por t (left-most table) or client (right-most table). Possible retransmissions are not c ounted.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 154 4.10.6 Windows Plat form RADIUS Server Configuration 1. Setup the RADIUS server and assign the clie nt IP address to the Manage d switch. In this case, field in the default IP Address of the Managed Switch with 192.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 155 Figure 4-10-9 Windows Server RADIUS Ser ver setting path 5. Enter ” Active Directory Users and Computers ”, create leg.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 156 Set the Ports Authenticate S tatus to “ Force Authorized ” if the port is connected to the RADIUS server or the port is a uplink port that is connec ted to another switch.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 157 Figure 4-10-12 7. Click “ OK ”. 8. When client has associated with the Managed Switch, a user authentication notice appear s in system tray. Click on the notice to continue.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 158 9. Enter the user name, password and the lo go n domain that your account belongs.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 159 4.1 1 Access Control Lists ACL is an acronym for Access Control Lis t. It is the list table of ACEs, containing access control entries that specify individ ual users or groups permitted or denied to specific tr affic objects, such as a process or a program.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 160 • Policy : The ACE will match ingress ports with a specific policy . • Port: The ACE will match a specific ingress port. • Frame T ype Indicates the frame type of t he ACE.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 161 4.1 1.2 ACE Configuration Configure an ACE (Access Control Entr y) on this page. An ACE consists of several parameters. T hese p arameters vary according to the frame t ype that you select.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 162 MAC Para meters Object Description • SMAC Filter (Only displayed when the frame type is Ethernet T ype or ARP .) S pecify the source MAC filter for this ACE. Any: No SMAC filter is specified.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 163 ARP Param eters The ARP parameters can be configured when Frame T ype "ARP" is selected. Object Description • ARP / RARP Specify the available ARP/RARP opcode (OP) flag for this ACE.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 164 address field (THA) settings. 0 : RARP frames where T HA is not equal to the SMAC address. 1 : RARP frames where T HA is equal to the SMAC address. Any : Any value is allo wed ("don't-care").
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 165 TCP parameters w ill appear . These fields are explained later in this help file. • IP Protocol V alue When "S pecific " is selected for the IP pr otocol value, you ca n enter a specific value.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 166 address and destination IP mask in the DIP Address a nd DIP Mask fields that appear . • DIP A ddress When "Host" or "Network" is selected for the destination IP filter , you can en ter a specific DIP address in dotted decimal notation.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 167 hits this ACE matches this TCP/UDP source value. • TCP/UDP Source Range When "Range" is selected for the TCP/UDP s ource filter , you c an enter a specific TCP/UDP source range value.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 168 Ethernet T ype Parameters The Ethernet T ype parameters can be configured when Frame Ty pe "Etherne t T ype" i s selected. Object Description • EtherT ype Filter S pecify the Ethernet type filter for this ACE.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 169 The page includes the following fields: Object Description • Set up Policy Rules Set up the default policy rules for Client ports, Server ports, Network ports and Guest ports.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 170 4.1 1.3.2 Set up Port Policies Group ports into several types according to different ACL policies. The settings relate to the currently selected stack unit, as reflected by the page header .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 171 4.1 1.3.3 Set up T ypical Network Application Rules Set up the specific ACL for different typical network application access con trol. The screen in Figure 4-1 1-5 appe ars.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 172 range is 0 to 65535 . • Others Indicates the other application that appl ies to the spec ific ACE. The other applications are: HTTPS , ICMP , Multicast IP Stream , NetBIOS , PING Request , Ping Reply , SNMP , SNMP T raps .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 173 through 8. • Sw itc h Select the switch to which this ACE applies. • Any : The ACE applies to any port. • Switch n: The ACE applies to this switch number , where n is the number o f the switch.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 174 4.1 1.3.4 Set up Source MAC and Source IP Binding S trictly control the net work traf fic by only allowing incoming fr ames that match the source IP and sourc e MAC on specific port.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 175 Figure 4-1 1-9 4.1 1.3.5 Set up DoS Att ack Detection Rules Set up the specific ACL for dif ferent typi cal network application acc ess control. The screen in Figure 4-1 1-10 appears.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 176 packet of destination unreachable to the spoofed source address. Eventu ally leading it to be unreachable by other clie nts and the system will go down.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 177 Object Description • Ingress Port Select the ingress port to which this ACE applies. • Any : The ACE applies to any port. • Port n : The ACE applies to thi s port number , where n is the number of the switch port.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 178 4.1 1.4 ACL Rate Limiter Configuration Configure the rate limiter fo r the ACL of the sw itch.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 179 4.1 1.5 ACL Ports Configuration Configure the ACL pa rameters (ACE) of each switch port. These parameters will af fect frames receiv ed on a port unless the frame matches a specific ACE.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 180 • Policy ID Select the policy to apply to this port. The allowed values are 1 through 8 . The default value is 1. • Act io n Select whether forwarding is p ermitted (" Permit") or denied ("Deny").
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 181 4.12 Address T able Switching of frames is based upo n the DMAC address contained in the fram e. The Managed Switch builds up a table that m aps MAC addresses to switch ports for knowing which ports the fr ames should go to ( based upon the DMAC address in the frame ).
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 182 4.12.2 St atic MAC T able Configuration The static entries in the MAC table are shown in this table. The static MAC table can contain 64 entries. The maximum of 64 entries is for the whole stack, and not per switch.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 183 4.12.3 MAC Address T able St atus Dynamic MAC T able Entries in the MAC T able are shown on this page. The MAC T able contains up to 8192 entries, and is sorted first b y VLAN ID, then by MAC address.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 184 Buttons Auto-refresh □ : Check this box to enable an automatic r efresh of the page at regular intervals. Refreshe : Refreshes the displayed table starting from the "S tart from MAC address" and "VLAN" input fiel ds.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 185 4.13 Port Security (T o be Continued) Port security is a feature that allows yo u to c onfigure a switch port with one or more device MAC addre sses that are authorized to access the network through that port.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 186 Make sure that the link used for managing the switch is added to the S tatic Mac T able befo re changing to secure learnin.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 187 4.14 LLDP 4.14.1 Link Layer Di scovery Protocol Link Layer Discovery Protocol (LLDP) is used to discover basic information about neig hboring devices on the local bro adcast domain.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 188 4.14.2 LLDP Configuration This page allows the user to inspect and configure the current LLDP port settings.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 189 This attribute must comply with the following rule: (T ransmission Interval * Hold T ime Multiplier) ≤ 65536, and T rans.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 190 • Port Descr Optional TL V: When checked the "port description" is included in LLDP information transmitted. • Sys Name Optional TL V: When checked the "system name" is included in LLDP information transmitted.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 191 4.14.3 LLDP Neighbor This page provides a status overview for all LLDP neighbors. The displayed table contains a row for each port on which an LLDP neighbor is detected. The LLDP Neighbor screen in Figure 4-14-3 appears.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 192 4.14. 4 LLDP S tatistics This page provides an overview of all LLDP traffic. Two types of counters are shown. Global coun ters are counters that refer to the whole stack, switch, while local counters refers to count ers for the currently selected switch.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 193 • T otal Neighbors Entries Dropped Shows the number of LLDP frames dropped due to that the entry table was full. • T otal Neighbors Entries Aged Out Shows the number of entries deleted due to T ime-T o-Live expiri ng.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 194 4.15 Network Diagnastics 4.15.1 Cable Diagnostics This page is used for running the Cable Diag nostics. Press to run the diagnostics. This will ta ke approximately 5 seconds.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 195 4.15.2 Ping This page allows you to issue ICMP PING p ackets to troubleshoot IP connectivity issues. After you press , 5 ICMP p ackets are transmitted, and the sequenc e number and roundtrip time are dis played upon receptio n of a reply .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 196 4.16 St acking – SGSW-24040 / SGSW -24040R Using S tacking, it is possible to conn ect a number of switches together in a stack, which behaves as a single s witch as seen from outside the stack.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 197 Chain St ack: A chain of s witches, that is , no redundant forwarding paths. Figure 4-16-1 Chain St ack topology Ring St ack: A ring of s witches, thereby providing redundant forwarding paths.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 198 4.16.1 St ack This section provides information for understand stacking ar chitecture, include the belo w items: Switc.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 199 "Save". 5. The ne w hardware has now taken over t he configuration of the failing har dware. General Switch ID Assignment Rules When assigning Switch IDs to the devices in the stack, you must not e the following: 1.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 200 Figure 4-16-4 Remove or Replace a switch from the st ack 4.16.1.4 Shortest Path Forwarding The SGSW Swtich supports shortest path forwarding technology to optimal data flow across the stack.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 201 4.16.2 St ack Configuration This page is used for configure the stack, include assign Swit ch ID, master priorit y and display the current stack member information. The screen in Figure 4-16-6 ap pears.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 202 4.16.3 St ack Information This page provides an overview of the stack topology , as d etected by SPROUT . St ack T opology The S tack T opolog y screen in Figure 4-16-7 appears.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 203 Figure 4-16-8 St ack Information page screenshot - St ack List The page includes the following fields: Object Description • Delete Deletes this switch from the stack configuration.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 204 Figure 4-16-9 St ack Information page screenshot - Master For warding T a ble 4.16.4 St ack Port St ate Ovewview This page provides an overview of the current switch port states.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 205 4.16.5 St ack Example S tacking function is convenie nt for administrator to manage multiple s witches by single IP . Basically , you got to have min. 2 u nits. The SGSW Switch supports auto stack confi guration.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 206 Figure 4-16-12 St ack Configuration Step 5: We wish to make the SGSW switch with MAC “00- 30-4f-24- 04-76” / S witch ID=2 to become the S tack Master and swap the Switch ID to 1.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 207 Reflash the web browser , the switch with MAC address “00- 30-4f-24-04-76” become the stack master now .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 208 5. COMMAND LINE INTERFACE 5.1 Accessing the CLI When accessing the management interface for the switch over a direct conne.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 209 1. For securit y reason, please change and memorize the new password after this first setup. 2. Only accept command i n lowercas e letter under console interface. Configure IP address The WGSW / SGSW Managed Switch is shipped with default IP address as following.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 210 Switch/> ip setup 192.168.1. 100 255.255.255.0 192.168.1.1 The previous command would apply the follow settings for the Switch. IP: 192.168.1.100 Subnet Mask: 255.255.255.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 21 1 5.2 T elnet login The Managed Switch also supports telnet for remote manageme n t. T he switch asks for user name and password for remote login when using teln et, please use “admin” for password.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 212 6. Command Line Mode The CLI groups all the commands in appro priate modes according to the nature of the command. A sample of the CLI command modes are described belo w . Each of the com mand modes supports specific software commands.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 213 all : Show all switch configuration, default: Sho w system configuration <port_list> : Port list or 'all',.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 214 Parameters: keep_ip : Keep IP configuration, def ault: Restore full configuration Example: T o restore default value but no t reset IP address: Switch/>system restore default keep_ip System Name Description: Set or show the system name.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 215 Parameters: <prompt> : CLI prompt string Default Setting: SWITCH Example: T o change CLI title: Switch/>system prompt SGSW-24040 SGSW-24040/> System Pass word Description: Set or show the system p assword.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 216 Parameters: <ip_addr> : IP addr ess (a.b.c.d), default: Show IP address Default Setting: 0.0.0.0 Example: Set SNTP server: SWITCH/>system sntp 220.130.158.52 System T imezone Description: Set or show the system timezone offset.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 217 <ip_server> : TFTP server IP address (a.b.c.d) <file_name> : Firmware file name.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 218 IP Configuration Description: Show IP configuration. Synt ax: IP Configuration Example: Show IP configuration: Switch/>ip configuration DHCP Client: Disabled IP Address : 192.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 219 IP Setup Description: Set or show the IP setup. Synt ax: IP Setup [<ip_addr>] [<ip_mask>] [<ip_router>] [<vid>] Parameters: <ip_addr> : IP address (a.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 220 SWITCH/>ip ping 192.16 8.0.51 PING server 192.168.0.51 60 bytes from 192.168.0.51: icmp_seq=0, time=0ms 60 bytes from 192.168.0.51: icmp_seq=1, time=0ms 60 bytes from 192.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 221 6.2 Port Management Command Port Conf iguration Description: Show port configuration.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 222 Default Setting: Enable Example: Disable port1 SWITCH/>port state 1 disable Port Mode Description: Set or show the port speed and duplex mode.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 223 Synt ax: Port Flow Control [<port_list>] [enable|disable] Parameters: <port_list> : Port list or 'all&apo.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 224 Port Power Description: Set or show the port PHY pow er mode. Synt ax: Port Power [<port_list>] [enable|disable|acti.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 225 Example: SWITCH/>port excessive 1 restart Port St atistics Description: Show port statistics.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 226 Port Numbers Description: Show port numbering. Synt ax: Port Numbers.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 227 Mirror Configuration Description: Show mirror configuration. Synt ax: Mirror Configuration [<port_list>] Parameters: <port_list> : Port list or 'all', default: All ports Mirror Port Description: Set or show the mirror port.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 228 Default Setting: 1 Example: Set mirror SID 2 for switch SWITCH/>mirror sid 2 Mirror Mode Description: Set or show the mirror mode.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 229 6.3 Link Aggregation Command Aggregation Configurati on Description: Show link aggregation configu ration.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 230 Aggregat ion Delete Description: Delete link aggregation. Synt ax: Aggr Delete <aggr_id> Parameters: <aggr_id>: Aggr egation ID, global: 1-2, local: 3-14 Example: Delete Group2 SWITCH/>aggr delete 2 Aggregation Lookup Description: Lookup link aggregation.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 231 Aggregation Mode Description: Set or show the link aggregation traffic distribution mode.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 232 LACP Con figuration Description: Show LACP configuration. Synt ax: LACP Configuration [<port_list>] Parameters: <.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 233 21 Disabled Auto Active 22 Disabled Auto Active 23 Disabled Auto Active 24 Disabled Auto Active LACP Mo de Description: Set or show LACP mode.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 234 Default Setting: Auto Example: Set key1 for port1~4 SWITCH/>lacp key 1-4 1 LACP Role Description: Set or show the LACP role.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 235 Parameters: <port_list> : Port list or 'all', default: All ports Example: Show LACP status of port1~4 SWIT.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 236.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 237 6.4 VLAN Configuration Command VLAN Configuration Description: Show VLAN configuration.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 238 Dot1q Example: Set VLAN mode in port base SWITCH/>vlan mode portbas ed VLA V PVID Description: Set or show the port VLAN ID.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 239 (default: Show accepted frame types) Default Setting: All Example: Set port20 that allow tagged frames only SWITCH/>vlan framet ype 20 tagged VLAN Ingress Filter Description: Set or show the port VLAN ingress filter .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 240 Parameters: <port_list> : Port list or 'all', default: All ports unta gged : VLAN Link Ty p e T agged ta g.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 241 dot1q : Set out layer VLAN tag ether type : 802.1Q Default Setting: N/A Example: SWITCH/>vlan etht ype 10 man VLAN Add Description: Add or modify VLAN entry .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 242 <vi d> : VLAN ID (1-4095) Example: Delete port17 to port24 in VLAN10 SWITCH/>vlan delete 10 17- 24 VLAN Lookup Description: Lookup VLAN entry .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 243 PVLAN Configuration Description: Show Private VLAN configuration. Synt ax: PVLAN Configuration [<port_list>] Parameters: <port_list> : Port list or 'all', default: All ports PVLAN Isolate Description: Set or show the port isolation mode.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 244 6.5 Sp anning T ree Protocol Command RSTP Config uration Description: Show RSTP configuration. Synt ax: RSTP Configuration [<port_list>] Parameters: <port_list> : Port list or 'all'.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 245 Default Setting: 32768 Example: Set RSTP system priority value in 4096 SWITCH/>rstp s ysprio 4096 RSTP Ag e Description: Set or show the RSTP maximum age.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 246 15 Example: Set RSTP forward delay value in 25 SWITCH/>rstp del ay 25 RSTP V ersion Description: Set or show the RSTP protocol version.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 247 Default Setting: Disable Example: Enable rstp mode for port1 SWITCH/>rstp mode 1 ena ble RSTP Cost Description: Set or show the RSTP p ath cost. Synt ax: RSTP Cost [<port_list>] [<pa th_cost>] Parameters: <port_list> : Port list or 'all'.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 248 <priority> : R STP priority (0/16/32/48/.../224/240) Default Setting: 128 Example: Set RSTP priority value in 16 for port1 SWITCH/>rstp priorit y 1 16 RSTP Edge Description: Set or show the RSTP edge parameter .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 249 Parameters: <port_list> : Port list or 'all', default: All ports enable : Enable RSTP point2point disable .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 250 RSTP S tatistics Description: Show RSTP st atistics. Synt ax: RSTP S tatistics [<port_list>] Parameters: <port_list>: Port list or 'all', default: All ports RSTP mCheck Description: Set the RSTP mCheck (Migration Check) variable for ports.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 251 6.6 Multicast Configuration Command IGMP Configuration Description: Show IGMP snooping configuration.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 252 Enable IGMP mode SWITCH/>igmp mode ena ble IGMP S tate Description: Set or show the IGMP snooping state for VLAN.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 253 disable : Disable IGMP snooping (default: Show IGMP snooping mode) Default Setting: Enable Example: Disable VID 1 SWITCH/>igmp state 1 disable IGMP Querier Description: Set or show the IGMP snooping querier mode for VLAN.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 254 IGMP Fastleave [<port_list>] [enable|disable] Parameters: <port_list> : Port list or 'all', default:.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 255 IGMP Flooding Description: Set or show the IGMP snooping unregistered flood operati on.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 256 Parameters: <vi d>: VLAN ID (1-4095) Default Setting: Disable Example: Enable IGMP flooding function SWITCH/>igmp.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 257 6.7 Quality of Service Command QoS Config uration Description: Show QoS Configuration.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 258 Parameters: <port_list> : Port list or 'all', default: All ports <class> : T raffic class low/normal.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 259 QoS QCL Port [<port_list>] [<qcl_id>] Parameters: <port_list> : Port list or 'all', default: A.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 260 <etype> : Ethernet Type vid : V L A N I D k e y w o r d <vi d> : V L A N I D ( 1 - 4 0 9 5 ) port : U D P / T .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 261 QoS Mode Description: Set or show the port egress scheduler mode. Synt ax: QoS Mode [<port_list>] [strict|weighted] .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 262 Synt ax: QoS Rate Limiter [<port_list>] [enable|disable ] [<bit_rate>] Parameters: <port_list> : Port li.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 263 SWITCH/>qos shaper 9-16 en able 1000 QoS Unicast Description: Set or show the unicast storm rate limiter .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 264 Example: Enable multicast storm rate limiter in 1kpps SWITCH/>qos storm multicast enable 1k QoS Broadcast Description: Set or show the multicast storm rate limiter .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 265 6.8 802.1x Port Access Control Command Dot1x Configuration Description: Show 802.1X configuration. Synt ax: Dot1x Configuration [<port_list> ] Parameters: <port_list> : Port list or 'all', default: All ports Example: Show IEEE802.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 266 disable : Disable 802.1X (default: Show 802.1X mode) Default Setting: Disable Example: Enable IEEE802.1x founction for port1 SWITCH/>dot1x mode enab le Dot1x St atus Description: Set or show the 802.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 267 Synt ax: Dot1x Server [<ip_addr>] Parameters: ip_addr : RADIUS server IP address (a.b .c.d) (default: Show IP address) Default Setting: 0.0.0.0 Example: Set RADIUS server IP address for switch.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 268 Refresh (restart) 802.1X authentication process. Synt ax: Dot1x Authenticate [<port_list>] [now] Parameters: <por.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 269 <reauth_period> : Period betwee n reauthentications (1-3600 seconds) (default: Show reauthentication peri od) Defaul.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 270 Parameters: <port_list> : Port list or 'all', default: All ports clear : C l e a r s t a t i s t i c s eap.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 271 300 Example: Set age time in 100 seconds SWITCH/>dot1x agetime 100 Dot1x Hold time Description: T ime in seconds before a MAC-address that failed authentication gets a new authentication chance.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 272 6.9 Access Control List Command ACL Configu ration Description: Show ACL Configuration.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 273 Rate Limiter: Disable Port Copy: Disable Loading: Disable Shut down: Disable Example: ???? SWITCH/>acl action 17-24 deny 1 24 l og shut ACL Policy Description: Set or show the ACL port policy .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 274 <rate_limiter_list> : Rate limiter list (1-15), default: All rate limiters <packet_rate> : Rate in pps (1, 2, 4, .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 275 <smac> : Source MAC address (xx- xx-xx-xx-xx- xx) or 'any' <dmac> : Destination MAC address (xx-xx-xx-xx-xx-xx) or 'an y' arp : A R P k e y w o r d <sip> : S o u r c e I P address (a.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 276 ACL Lookup Description: Show ACE, default: All ACEs. Synt ax: ACL L ookup [<ace_id>] Parameters: <ace_id> : ACE ID (1-1024) ACL Lookup Description: Clear all ACL counters.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 277 6.10 MAC Address T able Command MAC Configuration Description: Show MAC address table configuration.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 278 Example: Add Mac address 00-30-4F-01-01-0 2 in port1 and vid1 SWITCH/>mac add 00- 30-4f-01-01-02 1 1 MAC Delete Description: Delete MAC address entry .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 279 MAC Age Tim e Description: Set or show the MAC address age timer . Synt ax: MAC Agetime [<age_time>] Parameters: <.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 280 SWITCH/>mac learning 1 s ecure MAC Dump Description: Show sorted list of MAC address entries.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 281 MAC Flash Description: Flush all learned entries. Synt ax: MAC Flush.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 282 6.1 1 LLDP Command LLDP Co nfiguration Description: Show LLDP configuration. Synt ax: LLDP Configuration [<port_list>] Parameters: <port_list> : Port list or 'all', default: All ports LLDP Mode Description: Set or show LLDP mode.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 283 LLDP Option al TL V Description: Show / Set LLDP Optional TL Vs. Synt ax: LLDP Optional_TL V [<port_list>] [port_des.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 284 Parameters: <interval> : LLDP transmissio n interval (5-32768) Default Setting: 30 Example: Set transmission interval in 10 SWITCH/>lldp interval 10 LLDP Hold Description: Set or show LLDP T x hold value.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 285 <delay> : LLDP transmission delay (1-8192) Default Setting: 2 Example: Set LLDP delay value in 1 SWITCH/>lldp delay 1 LLDP Reinit Description: Set or show LLDP reinit delay .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 286 LLDP S tatistics Description: Show LLDP S tatistics. Synt ax: LLDP S tatistics [<port_list>] [clear] Parameters: <.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 287 6.12 S t ack Management Comma nd St ack List Description: Show the list of switches in stack. Synt ax: S tack List [detailed|productinfo] Parameters: deta iled : Show detailed information St ack List Description: Set the master election priority .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 288 St ack Select Description: Set or show the selected switch ID. Synt ax: S tack Select [<sid>|all] Parameters: <si.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 289 S tack SID Delete <sid> Parameters: <sid> : Switch ID (1-16) St ack SID Asign Description: Assign SID and associated configuration to s witch. SID must be unassigned, switch must be present and switch must not alr eady be assigned to a SID.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 290 7. SWITCH OPERATION 7.1 Address T able The Switch is implemented with an addr ess table. This address table composed of many en tries. Each entry is used to store the address information of some nod e in network, including MAC addre ss, por t no, etc.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 291 7.5 Auto-Negotiation The STP ports on the Switch have built-in "A uto-ne gotiation". This tec hnol ogy automatically sets the best possible ba ndwidth when a connection is established with another net work device (usu ally at Power On or Reset).
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 292.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 293 8 . TROUBLE SHOOTING This chapter contains information to help you solve pro blems. If the Ethernet Switch is not functioning properly , make sure the Ethernet Switch was set up according to instructions in this manual.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 294 ■ St acking not functioning Solution: 1. Check that modul es are installed correctly 2. PLANET CB-STX50 or CB-ST X200 cables not installed corre ctly (LEDs on front panel STX1 or STX2 do not light) 3.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 295 APPENDEX A A.1 Switch's RJ-45 Pin Assignment s 1000Mbps, 1000Base T Conta ct MDI MDI-X 1 BI_DA+ BI_DB+ 2 BI_DA- BI_DB.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 296 The standard cable, RJ-45 pin assignment The st andard RJ-45 recept acle/connector There are 8 wires on a standard UTP/ST P cable and each wire is color-coded.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 297 APPENDEX B : GLOSSARY A ACE ACE is an acronym for A cce ss C ontrol E ntry . It describes access permissi on associated with a particular ACE ID. There are three ACE frame types (Ethernet Type, ARP, an d IPv4) and t wo ACE actions (permit and deny).
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 298 D DES DES is an acronym for D ata E ncryption S tandard. It provides a complete description of a mathematical algorit hm for encrypting (enciphering) an d decrypting (deciphering) binar y coded information.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 299 DSCP DSCP is an acronym for D if fer entiated S ervices C ode P oint. It is a field in the head er of IP p ackets for packet classification purposes.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 300 connection. HTTPS provide authenticati on and encrypted communica ti on and is widely used on th e World Wide Web for security-sensitive communication suc h as payment transactions and corporate logons.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 301 The current version of the Internet Message Access Protocol is IMAP4. It is similar to Post Office Protocol version 3 (POP3), but offers additional and more complex features .
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 302 The frames also contain a MAC addr ess ( SMAC address ), which shows the MAC address of the equipment send ing the frame. The SMAC address is used by the s witch to aut omatically update the MAC t able with these dynamic MAC addresses.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 303 optional TL Vs. If an optional TL Vs is disabled the correspondin g informati on is not included in the LLDP frame.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 304 There are six QCE frame types: Ethernet T ype, VLAN, UDP/ TCP Port, DSCP, TOS, and Tag Priority. Frames can be classified by one of 4 different QoS classes: "Low", "Normal", "Medium", and "Hi gh" for individual application.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 305 which is the underlying protoc ol used in Microsoft Windows networking. Samba can be installed on a v ariety of operating system platforms, including Lin ux, most common Unix platforms, OpenVMS, and IBM OS/2.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 306 T Ta g P r i o r i t y T ag Priorit y is a 3-bit field storing the priority level for the 802.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 307 A LLDP frame can contain multiple pieces of information. Each of these pieces of informati on is known as TL V (TL V is short for "T ype Length V alue"). U UDP UDP is an acronym for U ser D atagram P rotocol.
User ’s Manu al of WGSW -24040 / WGSW -24040R SGSW -24040 / SGSW-24040R 308 forwarded to the provider port with a single VLAN tag. Tagged frames received on a subscriber p ort are forwarded to the provider port with a double VLAN tag. VLAN ID VLAN ID is a 12-bit field specifying the VLAN to which the frame belongs.
Ein wichtiger Punkt beim Kauf des Geräts Planet SGSW-24040R (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Planet SGSW-24040R noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Planet SGSW-24040R - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Planet SGSW-24040R reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Planet SGSW-24040R erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Planet SGSW-24040R besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Planet SGSW-24040R verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Planet SGSW-24040R. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Planet SGSW-24040R gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
