Benutzeranleitung / Produktwartung EP5550 des Produzenten Planar
Zur Seite of 90
EP4650/EP5550 User Guide.
Copyright © 9 May 2013 by Planar Sy stems, Inc. All rights reserved. Cont ents of this publication ma y not be re produc ed in any fo rm without permission of Planar Systems, I nc. T rademark Credits Windows™ is a trademark of Microsof t Corp . All other companies are trademarks or registered trademarks of their respective companies.
EP4650/EP5550 User Manual i T able of Contents EP4650/EP5550 User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Introduction . . . . . . . . . . .
Table of Contents ii EP4650/EP5550 User Manual OSD Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Remote Control Receiver .
Table of Contents EP4650/EP5550 User Manual iii Specific ations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 T roubleshooting .
Table of Contents iv EP4650/EP5550 User Manual.
EP4650/EP5550 User Manual 1 Introduction The EP4650/EP5550 is a 46” or 55” diagonal edge -lit LED L CD displa y that can be wall mounted , ceiling mounted or mounted on a stand . The display can be por trait or landscape. The EP4650 and EP5550 are ultr a slim and ha ve an aspect ratio of 1.
Safety Information 2 EP4650/EP5550 User Manual Safety Inf ormation Befor e using the EP4650/EP5550, please read this manual thoroughly t o help protect against damage to property , an d to ensure personnel safety . • Be sure to observe the following instructions.
Important Safety Instruct ions EP4650/EP5550 User Manual 3 Impor t ant Safety Instructions 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 F ollow all instructions. 5 Do not use the EP4650/ EP5550 near water . 6 Clean the L CD screens with an L C D screen cleaner or L CD wipes.
Recommended Usage 4 EP4650/EP5550 User Manual 16 Slight pressur e on the LC D will cause distortion of th e image. Heavier pr essure will cause permanent damage. Displa ys should be mount ed wher e viewers cannot touch the screen or insert small objec ts in the openings that will create hazards by c o ntacting bare conductive par ts.
European Union Disposal Information EP4650/EP5550 User Manual 5 European Union Disposal Inf orm ation English ■ Disposal of old Electrical & Electronic Equipment (Applicable throughout the Europ.
Normal Usage Guidelines 6 EP4650/EP5550 User Manual Norm al Usage Guidelines Normal use of the L CD is de fined as operating in the open air to prevent heat buildup , and without dir ect or indirect heat sources such as lighting fixtures, heating ducts, or direct sunlight that can cause the modules to experience high operating temperatur es.
Cleaning the EP4650/EP5550 EP4650/EP5550 User Manual 7 Cleaning the EP4650/EP5550 If dust has collec ted on the power plug , removed the plug from the outlet and clean off the dust. Dust build- up may cause a fire . Remove the power plug bef ore cleaning.
Package Contents 8 EP4650/EP5550 User Manual Package Contents Unpacking the EP4650/EP5550 The EP4650/EP5550 is packed in a cardboar d box and may be banded as part of t wo types of custom pallets, depending on the number of displays shipped . The EP4650/EP5550 is packed using foam to prot ect it during shipping.
Unpacking the EP4650/EP5550 EP4650/EP5550 User Manual 9 3 Remove the accessory bag and pack ing list. Item Descr iption Quantity 1L C D p a n e l 1 2C a r t o n 1 3 F oam Cushion T op 1 4 F oam Cushio.
Contents of the Accessory Kit 10 EP4650/EP5550 User Manual Contents of the Accessor y Kit P art P ict ur e Qu ant it y VGA Cable (D-sub) 1 USB Drive 1 Pow er c or d 1 IR extender cable 1 OSD Remote (A.
Dimensions EP4650/EP5550 User Manual 11 Dimensions EP4560 - F r ont LQ PP LQ PP LQ PP LQ .
EP4560 - Rear 12 EP4650/EP5550 User Manual EP4560 - Rear LQ PP LQ PP LQ PP LQ PP .
EP4560 - Side EP4650/EP5550 User Manual 13 EP4560 - Side St andard Inputs LQ PP LQ PP LQ PP +'6',9: .
Optional HD-SDI/VW Inputs 14 EP4650/EP5550 User Manual Option al HD-SDI/VW Inputs EP5550 - F r ont SDI O UT SDI IN SDI IN DVI OUT VGA OUT LQ PP LQ.
EP5550 - Rear EP4650/EP5550 User Manual 15 EP5550 - Rear LQ PP LQ PP LQ PP LQ PP .
EP5550 - Side 16 EP4650/EP5550 User Manual EP5550 - Side LQ PP LQ PP LQ PP 237,21$/ +'6',9: .
Installing an EP4650/EP5550 EP4650/EP5550 User Manual 17 Inst alling an EP4650/EP5550 This section explains how to install an EP 4650/EP5550. W e sugg est that you read the entire section before y o u attempt to install the unit.
Prepare Your Installation Location 18 EP4650/EP5550 User Manual Prepare Y our Inst allation Location Y ou should hav e prepared the area wh ere y ou will install the unit.
Operating the EP4560/EP5550 EP4650/EP5550 User Manual 19 Operating the EP4560/EP5550 OSD K eypad The OSD keypad is located on the r ear of the display .
Remote Control Receiver 20 EP4650/EP5550 User Manual Remote Control Receiver The remote contr ol receiv er is located near the keypad on the rear of the display .
LED Indicators EP4650/EP5550 User Manual 21 LED Indicators The LED indicator light is locat ed on the rear of the display near the keypad. T he follo wing table explains what the diffe rent colors and blink patterns mean.
Using the Remote Control 22 EP4650/EP5550 User Manual Using the Remote Control Below is a picture of the remote contr ol and its corresponding Hex codes .
Using the Remote Control EP4650/EP5550 User Manual 23 Num Fu n c t i o n Cus to me r Co de Hex Cod e Description 1 INFO 40AF 04FB Pr ovides so urce and r esolution information 2 40AF 1CE3 T urns the E.
Locking/Unlocking the OSD Menus 24 EP4650/EP5550 User Manual Locking/Unlocking the OSD Menus Y ou can lock or unlock the OSD menus by pressing a serie s of key commands on the rem ote cont rol. T o lock the menu, press the following keys on the r emote in the order listed: ENTER , ENTER , EX I T , EX I T , ENTER and EX I T .
Changing the Remote Control Battery EP4650/EP5550 User Manual 25 Changing the Remo te Control Batter y T urning the EP4650/EP5550 On 1 Inser t the power cord into EP4650 /EP5550 and into the power outlet. 2 Ensure the A C switc h is set to “—“ .
Turning the EP4650/EP5550 Off 26 EP4650/EP5550 User Manual T urning the EP4650/EP5550 Off With the pow er on, press the power button on the r emote or side control panel t o put the L CD panel in a standby mode. T o turn off power comp letely , turn the AC switch to “O” or disconnect the AC po wer cord from the power outlet.
Selecting the Input Source EP4650/EP5550 User Manual 27 Selecting the Input Source 1 Do one of the following: • Using the re mote, pr ess th e desired sour ce button ( VGA , HDMI 1 , HD MI 2 , DISPLAYPOR T , VIDEO ( COMPOSITE ), S - V ( S - VIDE O ), CO MPONENT , SDI 1 OR SDI 2 .
PIP Mode 28 EP4650/EP5550 User Manual PIP Mode The P ic ture -in-P ic ture mode displa ys a sep arate image within a smaller window in addition to the main source pictur e that is display ed on most of the display .
PIP Mode EP4650/EP5550 User Manual 29 5 T o switch the main source and the subsource: U sing the remote, pr ess SWA P . 6 T o switch audio between the main sourc e and the subsource: Using the remote , press AUDIO . 7 F or additional PIP func tionality , press MENU and navigate to the DISPLAY SETTINGS menu.
PIP Screen Table 30 EP4650/EP5550 User Manual 8 Side by Side : Pr ess the P - POSI TION button and then “Sid e by side” mode . The main source and the subsourc e will be on the screen displa y . PIP Screen T able The follo wing table shows sources that can be displa yed in a PIP window when sources in the main windo w are display ed.
OSD Menu Functions EP4650/EP5550 User Manual 31 OSD Menu Functions There ar e t wo menu modes: Gr aphics (DVI and VGA) and Video (HDMI and DisplayP or t).
OSD Menu Functions 32 EP4650/EP5550 User Manual Main Menu Submenu Sec ondary Menu Description Set ting Display Settin gs Main Aspect R atio Adjust the aspect ratio of th e screen Full screen, Pill.
OSD Menu Functions EP4650/EP5550 User Manual 33 Main Menu Submenu Sec ondary Menu Description Set ting Basic Settin gs OSD T ransparent Adjust the OSD transparent function 0~100 OSD Location Adjus.
OSD Menu Functions 34 EP4650/EP5550 User Manual Main Menu Submenu Sec ondary Menu Description Set ting Advan ced Settin gs Smar t light control Select the Backlight control function DCR (D ynamic .
OSD Menu Functions EP4650/EP5550 User Manual 35 Main Menu Submenu Sec ondary Menu Description Set ting Advan ced Settin gs Multi-Display Control Matrix Y Sets the number of displays used in the ve.
OSD Menus 36 EP4650/EP5550 User Manual OSD Menus Im age Settings Display Settings Main PIP.
Audio Settings EP4650/EP5550 User Manual 37 Audio Settings Basic Settings.
Basic Setting s 38 EP4650/EP5550 User Manual RTC Submenus User Mode Same Se ttings On Work Days Mode Same Settings On All Mode.
Advanced Settings EP4650/EP5550 User Manual 39 Adv anced Settings Network Settings.
Multi-Display Control 40 EP4650/EP5550 User Manual Multi-Display Control System St atus Na vigating Through the Menus 1 With the pow er on, press MENU . The IMAGE SETTINGS menu appears. 2 Within the menu, use ▲ , ▼ , , and ENTER to naviga te through the menus and adjust options.
Image Settings Menu EP4650/EP5550 User Manual 41 Im age Settings Menu This menu is used for making common image adjustments. Scheme Pres s or to select one of the following: Options: User , Vivid , Cinema, G ame , Spor t Brightness Increases or decreases the brig htness of the picture.
Image Settings Menu 42 EP4650/EP5550 User Manual Backlight Ran ge: 0~100 Color T emp and Gamma Adjusts red, green, blue gain and red, gr een blue offset. Gamma Options: Off , 1.85, 1.9, 1. 95, 2.0, 2.05 , 2.1, 2. 15, 2.2, 2.25, 2.3, 2.35, 2.4, 2.45, 2.
Display Settings Men u EP4650/EP5550 User Manual 43 Display Settings Menu Main Displa y Setting Mode Aspec t Ratio Changes the picture’ s aspect ratio Pre ss or to select the following optio.
Audio Settings Menu 44 EP4650/EP5550 User Manual Audio Settings Menu Aspec t Ratio Options : F ull scr een, Pillar Bo x, Lette r Box Side by Side Scale Submenu Options: Zoom In, Z oom Out, Main, PIP ,.
Basic Settings Menu EP4650/EP5550 User Manual 45 Basic Settings Menu This menu is used to make initial setup adjustments to the OSD ( On-Screen Display) menu and other on -screen messages . Balance Adjust the balance of the left and right speakers. Pr ess or , select the desired level , and press ENTER .
Basic S etting s Menu 46 EP4650/EP5550 User Manual OSD Rotation Select the OSD Rotation. Press or t o select the rotation. Options: Lands cape or P or trait OSD Language Options: English and Chinese OSD Timeout Options: 5~120 Sleep T imer Set a period of time after which the EP4650/EP5550 will automatically switch to standby mode.
Basic Menu/RTC (Real Time Clock ) Menu EP4650/EP5550 User Manual 47 Basic Menu/RTC (Real T ime Clock) Menu Real T ime Curr ent time setting Y ear/Month/Date, Hour: M inutes Ti me r Mo d e Timer mode s.
Basic Menu/RTC (Real Time Cl ock) Menu 48 EP4650/EP5550 User Manual RTC T imer Mode - User Ti me r Mo d e Use r mode Select the power on/off timer and spe cify the on/off times for each day of the w eek .
Basic Menu/RTC (Real Time Clock ) Menu EP4650/EP5550 User Manual 49 RTC T imer Mode - W ork Days Ti me r Mo d e Wo r k D a y s mode F or M onday-Friday , Saturday or Sunday, you ha ve t he following options: Enable or Disable th e schedule of the w ork days or individual weekend day s.
Basic Menu/RTC (Real Time Cl ock) Menu 50 EP4650/EP5550 User Manual RTC T imer Mode - All Days Ti me r Mo d e All Days mode Select all days of the week power on/off timer . F or a ll day s, you ha ve the following options: Enable or Disable th e schedule for all da ys of the week Options : Di sable, Enable P ower On/P ower O ff timer setup .
Advanced Settings Menu EP4650/EP5550 User Manual 51 Adv anced Settings Menu Aut o Ad ju st me nt F orces the ep46L/ep55L to reacquir e and lo ck to the input signal. This is useful when the signal quality is marginal. Note: This featur e does not continually reacqu ire the signal .
Advanced Settings Menu 52 EP4650/EP5550 User Manual Fle sh T on e This fea t ure is used to amplify all colors except that of people ’ s faces. Options : Off , Low , Medium and High ( Video Mode only) IRFM Creates slight frame motion to help avoid imag e r etention.
Advanced Settings Menu EP4650/EP5550 User Manual 53 Adv anced Settings - Ethernet Setup Su bmenu Enable Network Enable the network feature Options: No , Y es Dyna mic IP Enable DHCP for dynamic IP address assignment.
Advanced Settings Menu 54 EP4650/EP5550 User Manual User ADC Calibration 1 When using VGA as a signal source , go to ADV ANCED SETTINGS in the OSD menu, select VGA AD C SETTINGS and then selec t USER ADC CALIBRATIO N .
Advanced Settings Menu EP4650/EP5550 User Manual 55 c The black in the right bo x has to be the darkest black. 3 After the correct image is display ed, click “ Y es” to beg in ADC calibration. 4 During the calibration process , the following message will appear to notify you to wait for the calibra tion.
Advanced Settings Menu 56 EP4650/EP5550 User Manual Monitor ID Used to manually set the Monitor ID of each display in the vi deo wall. Options: 1-25 Vi d eo Wa l l Used f or displaying one im age acro ss multiple dis play s. Options: Ye s , N o Note: If No is selec ted, all of the options belo w the Pow er On Delay line will be grayed ou t.
System Status Menu EP4650/EP5550 User Manual 57 System St atus Menu This read-only menu provides inf or mation about the active sources and the latest firmwar e version.
Default Settings 58 EP4650/EP5550 User Manual Default Settings The follo wing table shows the default settings for the L CD . Item Defa ult Po we r s wi t c h O f f Sch eme U ser Brightness 50 Sharpne.
LAN Control EP4650/EP5550 User Manual 59 LAN Control The EP4650/EP5550 suppor ts extending ac cess to the RS232 commands ov er a network connection using a vir tual C OM por t ( VCOM). T he VCOM driver installer is included on the USB drive th at came with your display .
Installation 60 EP4650/EP5550 User Manual 2 Y ou may see a security warnin g similar to the f ollowing example. Click Run to contin ue..
Installation EP4650/EP5550 User Manual 61 3 The vc omsetup.ex e installer installs both the VCOM virtual serial por t and also a utility ( WinP cap) for finding your EP46 50/EP5550s on the net work. F ollow the steps in the two installers, ac cepting de faults and license agreements as needed.
Installation 62 EP4650/EP5550 User Manual 4 When the installers are finished, y o u wi ll see a VC OM icon on your desktop and you find two new folders in y our star t me nu: IC Plus c orp (with VCOM sub f older) and WinP cap. If you need to uninstall th e software, there are shor tcuts to uninstall from these menus.
Configuring VCOM EP4650/EP5550 User Manual 63 Conf iguring VCOM Use the VC OM shor tcut to launch the VCOM setup utility . Th e utility star ts up on the Device Info page , shown below . The contro ls on this page allo w you to find and configure each EP4650/EP5550 that y ou want to access vi a vir tual C OM por ts.
Configuring VCOM 64 EP4650/EP5550 User Manual Click on COM Mapping t o display the C OM Mapping page, shown below . The controls on this page allo w you to make virt ual C OM por ts and select the EP4650/EP5550 to whic h you want to map e a ch virtual COM port.
Function Descriptions EP4650/EP5550 User Manual 65 Function Descriptions Search In the Device Info page, click the Search icon. T his func tion searches f or any devices that are connected to the same network seg ment (maximum of 254 devices) as your PC.
Configure IP Address 66 EP4650/EP5550 User Manual Conf igure IP Address This function allows you to configu r e the net work settings of the selected EP4650/EP5550 device. W e recommend using the on-screen menus or the web interface described in the User Guide instead of this func tion.
Adding a Virtual COM Port EP4650/EP5550 User Manual 67 Adding a Virtual COM P or t T o add a vir tual COM port, click the Add ic on on the C OM Mapping page to open the follo wing dialog window . Selec t the display y ou want to control from the table and accept defaults , as shown.
Removing a COM Port 68 EP4650/EP5550 User Manual Y ou can view details for the vir tual C OM po r t device using Devic e Manager , shown below . Remo ving a COM P or t On the C OM M apping page, select the C OM port you want to delete and click the REMOV E button.
Setting Up Email Alerts EP4650/EP5550 User Manual 69 Setting Up Em ail Aler ts The web service allows you to configure the settings required to send email alerts. If you ar e not using emai l aler ts, y ou do not need to use the web ser vice and can skip this section.
Login 70 EP4650/EP5550 User Manual When you first login, yo u will see the S ystem Stat us page, as shown here ..
Administrator EP4650/EP5550 User Manual 71 Administrator Click on the wor d Administrat or under the Planar logo to show/hide these menu items. Authentication Conf iguration Set user ID and password f o r login to the web ser vice. System IP Conf iguration Y ou can view and/or change the net work sett ings here .
System Status 72 EP4650/EP5550 User Manual System St atus • Kernel version - Sho ws the firmw a r e version f or the net work int er face. • MA C Address - Shows the unique address assigned to the network inter face. • Nick name - Enter a device tag , up to 12 charac ters.
Firmware Update and Boot Loader Upgrade EP4650/EP5550 User Manual 73 3 Make sure the IP addr ess in your bro wser is correct and then click OK . 4 When the process is complete , you should see the login page again. F irmware Update and Bo ot Loader Upgrade In most cases, you will not ne ed to update firm ware f or the network interface.
TCP Mode, UDP Mode and UART 74 EP4650/EP5550 User Manual TCP Mode , UDP Mode and UART F or normal operation, you will not need to change any settings on these pages . If you do need to change information, Planar’ s T echnical Supp ort Depar tment will provide you with mor e information.
Reset Device EP4650/EP5550 User Manual 75 Y our ne twork administrator must provid e information f or the following fields: • Enable SMTP - Make sur e this check box is checked . Port 25 is the default. • SMTP Server Addr ess - Name or IP address of the mail ser ver .
Signal Compatibility 76 EP4650/EP5550 User Manual Sign al Compatibility Ti mi n g VESA VGA 640 x 480 31.469 59.94 25.175 O O - - - O O - 37.861 72.809 31.5 O O - - - O O - 37.5 75 31.5 O O - - - O O - 43.269 85.008 36 O O - - - O O - SVGA 800 x 600 35.
Signal Compatibility EP4650/EP5550 User Manual 77 Note: 480i means suppor ted 480i @ 60 Hz ( YPbP r). 576i means suppor ted 576i @ 50 Hz (Y P b P r ) * HD-SDI is an optional feature . Ti mi n g 91.146 85.024 157.5 O O - - - O O - SXGA+ 1400 x 1050 64.
Specifications 78 EP4650/EP5550 User Manual Specif ications Item Specifica tion L CD panel Resolution 1920 x 1080 Brightness (t yp .) EP4650 EP5550 700 cd/m 2 700 cd/m 2 Contrast Ratio Minimum 3000:1, Ty pical 4000:1 Response Time EP4650 EP5550 5.5 ms 5.
Specifications EP4650/EP5550 User Manual 79 Item Specifica tion Phy sical Standard Dim ensions ( W x H x D) EP4650 EP5550 41.6” ( W ) x 24.1” (H) x 2.0” (D) 1057.1mm ( W ) x 611.9mm (H) x 51.0mm (D) 49.2” ( W ) x 28.3” (H) x 2.1” (D) 1248.
Troubleshooting 80 EP4650/EP5550 User Manual T rou bleshooting Befor e calling ser vice personnel, please ch eck the following table f or a possible cause of the problem y o u ar e experienci ng. Please note the f o llowing: • P er form the adjustments according to "Operating the EP4560/EP5550" on page 19.
Accessing Planar’s Technical Support Websi te EP4650/EP5550 User Manual 81 Accessing Plan ar’ s T echnical Suppor t W ebsite 1 Go to http://planarpartners.com 2 Once you enter your log i n and passwor d, you can access downloadable utility software, new firmwar e and user manuals.
Downloading Utility Software 82 EP4650/EP5550 User Manual Do wnloading Utility Software 1 Go t o http://planarpartners.com . 2 Enter your log in and password information. 3 Under the Ser vice heading on the left pane , selec t the Software/F irmware subheading.
EP4650/EP5550 User Manual i Inde x A accessor y kit, 10 adjusting volume, 26 administrator in w eb ser vice, 71 advanced settings menu, 39, 51 audio settings men u, 37, 44 authentication configuration.
Index ii EP4650/EP5550 User Manual advanced settings, 39 audio settings, 37 basic settings, 37 display settings, 36 functions, 31 image settings, 36 network settings, 39 RT C, 38 system status, 38 unl.
Ein wichtiger Punkt beim Kauf des Geräts Planar EP5550 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Planar EP5550 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Planar EP5550 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Planar EP5550 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Planar EP5550 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Planar EP5550 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Planar EP5550 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Planar EP5550. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Planar EP5550 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
