Benutzeranleitung / Produktwartung PDP-425CMX des Produzenten Pioneer
Zur Seite of 24
PDP-425CMX Plasma Display Panel RS-232C Commands C OMMAND R EFERENCE M ANUAL Manual Version 1.00 March 1, 2006 Pioneer Corporation Pioneer Electronics (USA) Inc.
2 RS-232C Adjustment This display has an RS-232C terminal. It is possible to use a PC to make various adjustments and settings. 1.1 About the RS-232C Adjustment Adjustments using the RS-232C: • The adjustments are written to the same memory area as for the integrator mode (refer to section 5.
3 RS-232C Adjustment 1.2 Interface 1) Connector D-sub 9 pins (male/straight) 2) Pin layout 3) Baud Rate 9600 bps (standard) (switch-able to 1200, 2400, 4800, 19200, 38400 bps) Note The baud rate of this display should be set to match the baud rate of the PC.
4 RS-232C Adjustment 1.3 Combination Connection When controlling/adjusting panels, it is convenient to connect several displays to one PC. By performing a combination connection and assigning IDs to the panels, it is possible to control and adjust several displays at the same time or separately.
5 RS-232C Adjustment 1.4 ID Assignment The ID is assigned from the PC. Commands: <IDC> (ID CLEAR) ........ Clears the assigned ID <IDS> (ID SET) ............. Assigns an ID IDS is only effective when an ID is not assigned. IDs are assigned starting from the panel closest to the PC.
6 Under the connection conditions shown below, use a combination cable for up to 16 panels. Conditions: 1 Length of RS-232C cable connecting PC to PDP-425CMX/PDP-42MXE10: 5 m 2 Combination cable lengt.
7 RS-232C Adjustment 1.5 List of RS-232C Commands 7 Normal Operation Related Commands Command Function Number direct Last Effective Minimum Maximum memory POWER POF Turns the power OFF. PON Turns the power ON. INPUT SELECT INPS01 Switches the main screen to INPUT1.
8 RS-232C Adjustment 7 “ MENU ”–“ SET UP ” related commands Command Function Number direct Last Effective Minimum Maximum memory COLOR TEMP. CTPS01 Sets the color temperature to LOW. CTPS02 Sets the color temperature to MID LOW. CTPS03 Sets the color temperature to MIDDLE.
9 RS-232C Adjustment 7 “ MENU ”–“ OPTION ” related commands Command Function Number direct Last Effective Minimum Maximum memory ENERGY SAVE ESVS00 Sets ENERGY SAVE to standard. ESVS01 Sets ENERGY SAVE to save energy. ESVS02 Sets ENERGY SAVE to fixed brightness.
10 RS-232C Adjustment Command Function Number direct Last Effective Minimum Maximum memory WHITE BALANCE RHI Adjusts R.HIGH of the white balance. 000 255 GHI Adjusts G.HIGH of the white balance. 000 255 BHI Adjusts B.HIGH of the white balance.
11 RS-232C Adjustment Command Function Number direct Last Effective Minimum Maximum memory SCREEN MASK FMKS00 Sets SCREEN MASK to OFF. FMKS02 Sets SCREEN MASK to inverse (negative – positive reversed). FMKS03 Sets SCREEN MASK to white mask. FMKS04 Sets SCREEN MASK to red mask.
12 RS-232C Adjustment Command Function Number direct Last Effective Minimum Maximum memory FRONT INDICATOR LESS00 Sets the FRONT INDICATOR to OFF. LESS01 Sets the FRONT INDICATOR to ON. COLOR MODE CLMS00 Sets the COLOR MODE to NORMAL. CLMS01 Sets the COLOR MODE to STUDIO.
1 3 RS-232C Adjustment Command Function Number direct Last Effective Minimum Maximum memory DISPLAY CALL DITS01 Displays DISPLAY CALL 1. DITS02 Displays DISPLAY CALL 2. IM0 INFORMATION write-in (1-3 characters). IM1 INFORMATION write-in (4-6 characters).
1 4 RS-232C Adjustment 1) Obtaining QST Status Information Sequence Data Content Size Remarks 1 STX 1 Byte 02hex 2 Command echo-back 3 Byte QST (fixed) 3 Generation information 1 Byte 5 (fixed) 4 Inch.
1 5 RS-232C Adjustment 2) <QPI> Obtaining Integrator/PICTURE information Sequence Data Content Size Remarks 1 STX 1 Byte 02hex 2 Command echo-back 3 Byte QPI (fixed) 3 CONTRAST 3 Byte 000 to 255.
1 6 RS-232C Adjustment 5) <QSS> Obtaining SETUP information Sequence Data Content Size Remarks 1 STX 1 Byte 02hex 2 Command echo-back 3 Byte QSS (fixed) 3 COLOR TEMP.
1 7 RS-232C Adjustment Sequence Data Content Size Remarks 27 PRO USE UNDERSCAN 1 Byte 0: OFF 1: ON 28 PRO USE IMAGE PROCESS 1 Byte 1: NORMAL 2: PURE 3: MONOTONE 4: HIGH CONTRAST 29 PRO USE SYGNAL TYPE 1 Byte 1: MOTION 2: STILL 3: NONE STD 30 FRC 1 Byte 0: OFF 1: ON 31 POWER ON MODE INPUT 1 Byte See the figure below.
1 8 RS-232C Adjustment 9) <QAP> Obtaining machine name Sequence Data Content Size Remarks 1 STX 1 Byte 02hex 2 Command echo-back 3 Byte QAP (fixed) 3 Machine name information 18 Byte A/J (North .
1 9 RS-232C Adjustment 7 Check Sum This is data to which 2-Byte ASCII code is added to a data group returned by a QUEST command. STX 02 (hex) 2 Byte 3 Byte 03 (hex) ID QUEST command ETX STX 02 (hex) QUEST command 3 Byte Data *Byte Check sum 2 Byte ETX 03 (hex) PC side Set side A detailed example is given below.
20 Screen Burning 2.03.0 Screen Burning When the same image is reproduced for a long period (still image, telop, etc.), the image is burned into to screen. It may be difficult to remove this image. Burning should be managed by making necessary changes in the video software, projection method, system configuration etc.
21 3.0 Precautions on Connecting Camera Images Connecting and using moving images that are nearly still, such as images from a surveillance camera, could damage the panel and reduce the life or be the cause of other issues. In this situation, it is necessary to set the image quality beforehand.
22 5.0 Precautions 1) If the power shuts down and stays OFF for a long period, an internal problem has probably occurred (failing part, etc.). Turn OFF the main power switch on the Plasma Display then wait 1 to 2 minutes and try turning the power ON again.
2 3 Maintenance Name Part Number Cleaning cloth: Wiping cloth AED1285 Cleaning cloth: Minimax GED-009 Cleaning liquid: B4 GEM1004 1) Be sure to unplug the power cord from the power outlet before performing maintenance. 2) Cabinet and Remote-control Unit Never use solvents such as benzene or thinner.
PDP-425CMX RS-232C Command Reference Manual Pioneer Electronics (USA) Inc. Industrial Solutions Business Group 2265 East 220 th Street Long Beach, California 90810 United States of America (310) 952-2000 http://www.
Ein wichtiger Punkt beim Kauf des Geräts Pioneer PDP-425CMX (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pioneer PDP-425CMX noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pioneer PDP-425CMX - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pioneer PDP-425CMX reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pioneer PDP-425CMX erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pioneer PDP-425CMX besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pioneer PDP-425CMX verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pioneer PDP-425CMX. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pioneer PDP-425CMX gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
