Benutzeranleitung / Produktwartung DEH-8300SD des Produzenten Pioneer
Zur Seite of 28
Operation Manual CD RDS RECEIVER DEH-8300SD English.
Thank you for purchasing this PIONEER product. T o ensure proper use, please read through this manu al before using this product. It is especially important that you read and obser ve WARNING s and CAUTION si n this manual. Please keep the ma nual in a safe and accessible place for future r efer- ence.
If you want to dispose this product, do not mix it with general household waste. There is a se- parate collection system for used electronic products in accordance with legislation that re- quires proper treatment, recovery and recy- cling.
! Remember that if the feature demo continues operating when the car engine is turned off , it may drain batter y power . The demo automatically starts when the igni- tion switch is set to ACC or ON while the unit is turned off . T urning off the unit does not can- cel demo mode.
Head unit 1 2 3 4 5 6 7 8 9 f a b d c e g Part Part 1 MUTE / CLK 9 AUX input jack (3.5 mm stereo jack) 2 TA / NEWS a BAND / ESC 3 TA G / S.Rtrv b (list) 4 MUL TI-CONTROL ( M.
Basic Operations Important ! Handle gently when removing or attaching the front panel. ! Avoid subjecting the front panel to excessive shock. ! Keep the front panel out of direct sunlight and high temperatures. ! T o avoid damaging the device or vehicle inter- ior , remove any cables and devices attached to the front panel before detaching it.
T uner Basic Operations a b c 8 9 3 4 6 1 2 7 5 RDS d 3 4 1 2 7 5 Non-RDS or MW/LW 1 TA G indicator 2 T ags transferring indicator 3 Band indicator 4 5 (stereo) indicator 5 LOC indicator Appears when local seek tuning is on. 6 Preset number indicator 7 Signal level indicator 8 TEXT indicator Shows when the radio text is received.
# Y ou can also change the station by pushing M.C. up or down. # T o return to the ordinar y display, press BAND / ESC or (list). Switching the RDS display RDS (radio data system) contains digital infor- mation that helps search for the radio sta- tions.
Using radio text Displaying radio text Y ou can display the currently received radio text and the three most recent radio texts. 1 Press and hold DISP / / SCRL to display radio text. ! Y ou can cancel radio text display by pressing DISP / / SCRL , TA / NEWS , SRC / OFF or BAND .
BSM (best stations memor y) BSM (best stations memor y) automat ically store s the six strongest stations in the order of their signal strength. 1 Press M.C. to turn BSM on. T o cancel, press M.C. again. Regional (regional) When AF is used, the regional function limits the se- lection of stations to those broadcasti ng regional pro- grams.
Playing songs on a USB storage device 1 Open the USB connector cover . 2 Plug in the USB storage device using a USB cable. Stopping playback of files on a USB storage device 1 Y ou may disconnect the USB storage device at any time. Playing songs on an SD memor y card 1 Remove the front panel.
2 T ur n M.C. to change the menu option and press to select FUNCTION. 3 T ur n M.C. to select the function. After selecting, per form the following proce- dures to set the function.
Viewing a list of songs in the selected categor y 1 When a categor y is selected, press M.C. Playing a song in the selected categor y 1 When a categor y is selected, press and hold M.C. Searching the list by alphabet 1 When a list for the selected categor y is displayed, press to switch to alphabet search mode.
Shuffle mode (shuffle) 1 Press M.C. to select your favorite setting. ! Shuffle Songs – Play back songs in the se- lected list in random order . ! Shuffle Albums – Play back songs from a randomly selected album in order . ! Shuffle OFF – Can cel random play.
1 Pus h M.C. left or right to select an equalizer cur ve. Powerful — Natural — Vocal — Custom1 — Cus- tom2 — Flat — S.Bass 100 Hz (equalizer adjustment) Y ou can adjust the currently selected equalizer cur ve setting as desired. Adjusted equalizer cur ve settings are store d in Custom1 or Custom2 .
Initial Settings 1 1 Function display ! Shows the function status. 1 Press and hold SRC/OFF until the unit turns off. 2 Press M.C. and hold until the initial set- ting menu appears in the display . 3 T ur n M.C. to select the initial setting. After selecting, per form the following proce- dures to set the initial setting.
1 Pus h M.C. left or right to adjust the brightness level. 0 to 15 is displayed as the level is increased or de- creased. ! When dimmer is functioning, the brightness level can be adjusted 0 to 10 .
3 T ur n M.C. to change the display . Background visual — genre — background pic- ture 1 — background picture 2 — background picture 3 — background picture 4 — simple dis- play — movie screen 1 — movie screen 2 — ca- lendar # Genre display changes depending on the genre of music.
T roubleshooting Symptom Cause Action (Refer- ence page) The display automatically returns to the ordinar y dis- play . Y ou did not per- form any opera- tion within about 30 seconds. Perform operation again. The repeat play range chan ges unexpectedly.
Message Cause Action NO AUDIO There are no songs. T ransfer the audio files to the USB storage dev ice and connect. The connected USB storage de- vice has security enabled Follow the USB storage dev ice in- structions to dis- able the security.
Message Cause Action ERROR-23 USB storage de- vice was not for- matted with FA T12, FA T16 or FA T32 USB storage de- vice should be for- matted with FA T12, FA T16 or FA T32. ERROR-16 The iPod firm- ware version is old. Update the iPod version. iP od failure Disconnect the cable from the iP od.
SD memory card This unit supports only the followi ng types of SD memor y cards. ! SD ! miniSD ! microSD ! SDHC Keep the SD memor y card out of the reach of chil- dren. Should the SD memor y card be swallowed, con- sult a doctor immediately. Do not touch the connect ors of the SD memor y card directly with your fingers or with any metal device.
WA V File extension: .wav Quantization bits: 8 and 16 (LPCM), 4 (MS ADPCM) Sampling frequenc y: 16 kHz to 48 kHz (LPCM), 22.05 kHz and 44.1 kHz (MS ADPCM) AAC Compatible forma t: AAC encoded by iT unes File extension: .
iPod compatibility This unit supports only the followi ng iPod models. Supported iPod software versions are shown below . Older versions may not be supported. ! iPhone 4 (software version 4.0) ! iPhone 3GS (software version 4.0) ! iPhone 3G (software version 4.
MP3 Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.
Specifications General P ower source ............................. 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system ................... Negative type Maximum current consumpti on ..................................................... 10.0 A Dimensions (W × H × D): DIN Chassis .
En 27.
PIONEER CORPORA TION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagaw a 212-0031, JAP AN PIONEER ELECTRONICS (USA) INC. P .O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique TEL: (0) 3/570.
Ein wichtiger Punkt beim Kauf des Geräts Pioneer DEH-8300SD (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pioneer DEH-8300SD noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pioneer DEH-8300SD - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pioneer DEH-8300SD reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pioneer DEH-8300SD erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pioneer DEH-8300SD besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pioneer DEH-8300SD verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pioneer DEH-8300SD. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pioneer DEH-8300SD gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
