Benutzeranleitung / Produktwartung AVH-X8700BT des Produzenten Pioneer
Zur Seite of 163
Operation Manual D VD RDS A V RECEIVER A VH-X8700BT English.
Thank you for buying this P ioneer product. Please read through these instructions so you will know how to operate your model properly . After you have finished r eading the instr uctions, keep this document in a safe place for futu re refer ence.
– P airing from your Bluetooth devices 27 – Connecting to a Bluetooth device automatically 27 – Deleting a registered device 28 Connecting a registered Bluetooth device manually 28 Switching vis.
Reading the screen (for audio) 51 Reading the screen (for video) 52 Starting procedure 52 Selecting files from the file name list 53 Playing tracks in random order 53 Setting a repeat play range 53 Sw.
Starting procedure 76 Using your iPhone or smartphone applications Using AppRadio Mode 77 – Using the touch panel keys (App control side bar) 77 – Starting procedure 78 – Using the keyboard 79 .
– Setting the reversed image display for the rear view image 101 Setting the camera for Camera View mode 101 Displaying the parking assist guidelines 102 Setting guidelines on the rear view image 10.
– Setting the code number and level 129 Displaying your DivX VOD registration code 130 Displaying your DivX VOD deregistration code 130 Automatic playback of DVDs 130 Setting the video signal for th.
– Maintaining the LCD screen 160 – LED (light-emitting diode) backlight 160 Specifications 161 Contents Engb 8.
Certain country and government laws may pro- hibit or restrict the placement and use of this product in your vehicle. Please comply with all applicable laws and regulations regarding the use, installation and operation of this product. If you want to dispose this product, do not mix it with general household waste.
! If you notice smoke, a strange noise or odour from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorised Pioneer Ser vice Station. Using this product in this condition may result in permanent damage to the system.
! In some countries the viewing of video image on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed. If you attempt to watch video image while driv- ing, the warning “ Viewing of front seat video source while driving is strictly pro- hibited.
In case of tr ouble Should this product fail to operate properly, contact your dealer or nearest authorised Pioneer Ser vice Station. Visit our website Visit us at the following site: http://www.
1 1 RESET button About this manual This manual uses diagrams of actual screens to describe operations. However , the screens on some units may not match those shown in this manual depending on the model used.
Checking part names and functions This chapter gives information about the names of the parts and the main features using the but- tons. 1 3 2 4 5 6 7 8 9 b c a 1 LCD screen 2 Remote control sensor p The remote control CD-R33 (sold sepa- rately) is available.
! After the front panel has been detached, the attaching plate will move back to its original position automatically. Be careful not to let hands or other objects get caught behind the monitor as it is moving back. ! Please make sure that the front panel is in its original position while the vehicle is in mo- tion.
2 Push on the bottom of the front panel until it clicks into place . Notes on using the LCD panel WARNING ! Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children ’ s hands and fingers.
2 T ouch the following key . Opens the LCD panel. 3 Insert a disc into the disc-loading slot. The disc is loaded, and the LCD panel closes. Ejecting a disc 1 Press the h button. 2 T ouch the following key . The LCD panel opens, and the disc is ejected.
Plugging and unplugging a USB storage device p This product may not achieve optimum per- formance with some USB storage devices. p Connection via a USB hub is not possible. p A USB cable is required for connection. Plugging in a USB storage device % Plug a USB storage device into the USB cable.
When the Application screen is available % Press and hold the MODE button. The display turns off . p If you touch the screen when the display is off , it reverts to the original screen. When the Application screen is not available % Press the MODE button.
How to use the screens Switching screens using the touch panel keys 1 2 3 4 7 8 9 5 6 Engb 20 Chapter 02 Basic operation.
Switching screens using the hardware buttons 8 9 1 7 1 T op menu screen This is the starting menu to access the de- sired screens and operate the various func- tions. p If you press the HOME button, the T op menu screen is displayed. p “ APPS ” is displayed when AppRadio Mode or MirrorLink mode is on.
! CD ! ROM (compressed audio or video files) ! DVD-V ideo ! Video-CD The following sources can be played back or used by connecting an auxiliar y device. ! USB ! SD ! iP od ! Aha Radio ! Bluetooth audio ! AV input (AV) ! AUX ! HDMI Displaying the A V operation scr een 1 Press the HOME button to display the T op menu screen.
1 A V operation key The AV operation screen appears. 3 T ouch the following key . Displays the source list. 4 T ouch the source key you want to se- lect. The AV operation screen of the selected source appears. p “ Camera View ” is available only when “ Back Camera Input ” or “ 2nd Camera Input ” is set to “ On ” .
2 T ouch the A V operation key . 1 1 A V operation key The AV operation screen appears. 3 T ouch the following key . Displays the source list. 4 T ouch the following key . The source keys can be moved. 5 Drag the source key to the desired posi- tion. 6 T ouch the following key .
Operating the time bar 1 1 Y ou can change the playback point by drag- ging the key . p Playback time corresponding to the po- sition of the key is displayed while drag- ging the key. p This function is not available when using iPod function with an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, or iP od touch (5th genera- tion).
If your devices feature Bluetooth ® technology , this product can be connected to your devices wirelessly . This section describes how to set up a Bluetooth connection. For details about connectivity with the devices featuring Bluetooth wireless technology, refer to the information on our website.
6 Wait until your Bluetooth device ap- pears in the list. p If you cannot find the Bluetooth device that you want to connect, check that the device is waiting for a Bluetooth wireless technol- ogy connection. 7 T ouch the name of the Bluetooth device you want to register .
p If this function is set to on, a connection with the last connected Bluetooth device will be established automatically when the ignition switch is turned on. 1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order .
3 T ouch the following keys in the follow- ing order . The “ Bluetooth ” screen appears. 4 T ouch [Connection]. 5 T ouch the name of the device that you want to connect. Switching visibility This function sets whether or not to make this product visible to other devices.
Clearing the Bluetooth memory CAUTION Never turn this product off while the Bluetooth memory is being cleared. 1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order . The “ Bluetooth ” screen appears.
CAUTION For your safety , avoid talking on the phone as much as possible while driving. If your mobile phone features Bluetooth tech- nology , this product can be connected to your mobile phone wirelessly. Using this hands-free function, you can operate this product to make or receive phone calls.
Making a phone call Y ou can make a phone call in many different ways. Direct dialling 1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order . The “ Dial ” screen appears. 1 2 1 Dial pad 2 Deletes one digit.
Selecting a number by alphabet search mode If many phone numbers are registered in the phone book, you can search for phone num- bers by alphabet search mode. 1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order .
3 T ouch the desired entry on the list to make a call. The dial screen appears. 4 Dialling starts. p T o cancel the call, touch . 5 T ouch the following key . Ends the call. The call ends. Using the preset dial lists Y ou can dial a number from the preset dial list.
Answering an incoming call This product informs you that it is receiving a call by displaying a message and producing a ring sound. p Y ou can set the system to automatically an- swer incoming calls. If this product is not set to automatically answer incoming calls, answer the calls manually .
1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order . The “ Bluetooth ” screen appears. 3 T ouch [Ring T one] repeatedly until the desired setting appears. ! On (default): T urns the ring tone on.
Using the voice recognition function Y ou can use the voice recognition function of iPhone or smartphone. p When an iPhone running iOS 6.1 or higher is used, Siri Eyes Free Mode is available with this product.
! The registered name appears if the phone number of the received call is already regis- tered in the phone book. When one phone number is registered under different names, only the phone number is dis- played. ! If the phone number of the received call is not registered in the phone book, the phone number of the received call appears.
When using an iP od / iPhone or a smartphone with this product, configure the settings of this product according to the device to be con- nected. This section describes the settings required for each device. The basic flow of iPod / iPhone or smartphone setup 1 Select the method for connecting your de- vice.
! iP od classic 160GB (2008): Ver . 2.0.1 ! iP od classic 80GB: Ver . 1.1.2 ! iP od nano (7th generation) ! iP od nano (6th generation): Ver . 1.2 ! iP od nano (5th generation): Ver . 1.0.2 ! iP od nano (4th generation): Ver . 1.0.4 ! iP od nano (3rd generation): Ver .
Information on the connections and functions for each device The settings and cables required for connecting each device, and the available sources are as follows. iPod / iPhone with a 30-pin connector Required cable (sold separately) Cable connection is not required.
Android, MirrorLink Required cable (sold separately) Cable connection is not required. CD-MU200 CD-AH200 Smartphone Setup Device Others Others Others Connection Bluetooth USB HDMI Mode — Android Auto / Mir- rorLink / Off — Bluetooth connection Bluetooth connec- tion is required.
Y ou can listen to the radio using this product. This section describes operations for the radio. Using the touch panel keys 12 4 3 6 5 7 9 8 a 1 Displays the source list. = For details, refer to Selecting a fr ont source on the sour ce list on page 22.
Shows the status of the song information stored in this product. p The icon is displayed on all operation screens of AV sources. Indicator Meaning Appears when the song information tag is stored in this product. Appears when the song information tag is being transferred to an iPod .
Selecting a preset channe l from the preset channel list Once you have stored broadcast channels, you can easily recall preset channels from memor y with a single touch of a key. = For details, refer to Storing broadcast fre- quencies on page 45. 1 T ouch the preset channel list display key .
2 T ouch the following keys in the follow- ing order . The “ System ” screen appears. 3 T ouch [AV Source Settings]. 4 T ouch [Radio Settings]. 5 T ouch [Local]. The pop-up menu appears. 6 T ouch the item you want to set. FM ! Off (default): T urns the seek tuning setting off.
p Only TP stations and other enhanced net- works ’ TP stations are tuned in during seek tuning or BSM when the T A function is on. Using news programme interruption When a news programme is broadcast from a PTY code news station, this product can switch from any station to the news broadcast station.
Limiting stations to regional programming When AF (alternative frequency) is used to automatically retune frequencies, the regional function limits the selection to stations broad- casting regional programmes. p This function can only be used on the FM band.
2 T ouch the following keys in the follow- ing order . The “ System ” screen appears. 3 T ouch [AV Source Settings]. 4 T ouch [Radio Settings]. 5 T ouch [T uner Sound]. The pop-up menu appears. 6 T ouch the item you want to set. ! Music (default): Switches to the settings that give priority to the sound quality .
Y ou can play a normal music CD, Video-CD or DVD-V ideo using the built-in drive of this pro- duct. This section describes these operations. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. T o view video images, you must stop in a safe place and apply the handbrake.
9 Changes the playback point by dragging the key . = For details, refer to Operating the time bar on page 25. a Switches the media file type. = For details, refer to Switching the media file type on page 53. b Switches between playback and pause. c Uses “ Sound Retriever ” function.
Reading the screen (for video) Example: DVD 9 8 3 1 7 6 5 Example: Video- CD 3 1 a 4 2 1 Current time and date 2 Playback condition indicator Indicates the current playback condition. Playing tracks in random order Indicator Meaning Does not play tracks in random order .
= F or details, refer to Selecting a front source on the AV source selection scr een on page 22. 3 Use the touch panel keys on the screen to control the disc. = F or details, refer to Using the touch panel keys (for audio) on page 50. = F or details, refer to Using the touch panel keys (for video) on page 50.
Switches the media file type to video. ! CD-DA : Switches the media file type to CD (audio data (CD-DA)). Searching for the part you want to play Y ou can use the search function to find the part you want to play. p F or DVD - Videos, you can select Title (title), Chapter (chapter) or 10Key (numeric key- pad).
% T ouch the following key repeatedly until the desired setting appears. Changes the audio language. Y ou can specify the desired lan- guage as the default audio lan- guage. = For details, refer to Setting the top-priority languages on page 127. Frame-by-frame playback This lets you move ahead one frame at a time during pause.
Operating the DVD menu using touch panel keys If items on the DVD menu appear , the touch panel keys may overlay them. If so, select an item using those touch panel keys. 1 T ouch the following keys to select the desired menu item. Selects the lef t menu item.
Y ou can play compressed audio files stored in a disc or an external storage device (USB, SD) using the built-in drive of this product. This section describes how .
p This function is available only when playing files in an external storage de- vice (USB, SD) in the Music Browse mode. Reading the screen Example: USB 5 2 4 3 1 1 Current file information Music Browse mode ! Song title / File name Shows the title of the song currently playing (when available).
Setting a repeat play range (for Folder Browse mode) Indicator Meaning Repeats just the curren t file. Repeats just the curren t folder . Repeats all compressed audio files. 5 Play time indicator Shows the elapsed playing time within the current file.
If connecting an external storage device (USB, SD), this product accesses the database of music files with tag information and switches to the Music Browse mode automatically. Folder Browse mode Displays a folder name and file name in the current file information display area on the AV operation screen.
% T ouch the following key repeatedly until the desired setting appears. T urns random play on or off. ! (default): Does not play files in random order .
Y ou can play compressed video files stored on a disc or in an external storage device (USB, SD) using the built-in drive of this product. This section describes how . = For details, refer to Media compatibility chart on page 152. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion.
Reading the screen Example: Disc 3 2 1 1 Current time and date 2 Play time indicator Shows the elapsed playing time within the current file. 3 Current file information ! : File name Shows the name of the file currently playing. ! : Folder name Shows the name of the folder contain- ing the file currently playing.
2 T ouch a file on the list to play back. p Files are played back in file number order and folders are skipped if they contain no files. (If folder 01 (root folder) contains no files, playback commences with folder 02.) p T ouching a folder on the list shows its con- tents.
Y ou can view still images (JPEG images) stored in an external storage device (USB, SD) using the built-in drive of this product. This section describes how . Using the touch panel keys Example: USB 13 2 4 5 8 a b c d e f 9 9 6 7 1 Displays the source list.
3 T ouch [USB] or [SD] on the A V source selection screen. The image is displayed on the screen. 4 Use the touch panel keys on the screen to control the exter nal storage device (USB, SD). = F or details, refer to Using the touch panel keys on page 65.
1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order . The “ Video Setup ” screen appears. 3 T ouch [Time Per Photo Slide]. The pop-up menu appears. 4 T ouch the item you want to set. ! 10 sec (default): JPEG images switch at intervals of 10 sec- onds.
For iPod with a 30-pin connector users p Depending on your iP od, there may not be any output unless you use a USB inter face cable for iP od / iPhone (CD-IU201S/CD - IU201V) (sold separately). Be sure to use a USB inter face cable for iPod / iPhone (CD- IU201S/CD-IU201V) (sold separately) to connect your iPod .
= For details, refer to Setting the time and date on page 135. 3 Displays the Setting menu screen. 4 Recalls equaliser curves. = For details, refer to Using the equaliser on page 117. 5 Selects a track from the list. = For details, refer to Selecting song or video sour ces fro m the playlist screen on page 71.
2 Current time and date 3 Album artwork Album art of the current song is displayed if it is available. 4 Playback condition indicator Indicates the current playback condition. Setting the shuffle play Indicator Meaning Plays back songs or videos in random order within the se- lected list.
% T ouch the following key repeatedly until the desired setting appears. Changes the repeat play range. ! : Repeats all songs or videos in the selected list. ! : Repeats just the current song or video. p The repeat setting can be turned off when an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, or iP od touch (5th gen- eration) is used.
Using this product ’ s iPod function fr om your iPod Y ou can control this product ’ s iP od function from the connected iP od if the control mode is set to “ App Mode ” . The application screen of the iPod can be displayed on this product, and the music files and video files in the iPod can be played back with this product.
Displaying lists related to the song currently playing (link sear ch) 1 T ouch the artwork to open a list of the names of songs on the album currently playing. 2 T ouch the name of the song you want to play to start playing that song. p If part of the recorded information is not displayed, a scroll key appears on the right side of list.
Reading the screen 1 2 3 45 6 1 App name Shows the App name of the currently playing. 2 Song title Shows the title of the song currently being played (when available). “ No Title ” is dis- played if there is no corresponding informa- tion. 3 Artist name Shows the artist name for the song currently being played (when available).
If an Android Auto -compatible device is con- nected to this product, you can listen to the music output from the Android device with this product, and control the playback directly from this product. p This function is available only when Android Auto is turned on.
Setting a repeat play range Indicator Meaning Repeats all songs in the se- lected list. Repeats just the current song. p Playback condition indicators may not be displayed depending on the Android device. 5 Play time indicator Shows the elapsed playing time within the current file.
WARNING Certain uses of an iPhone or a smartphone may not be legal while driving in your juris- diction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing.
p If you press the HOME button twice, the App control side bar will disappear . Press the HOME button twice again, and the App control side bar will appear . Starting procedure When connecting an iPhone or smartphone to this product, you must select the method for connecting your device.
For smartphone users 1 Register your smartphone and connect it to this product via Bluetooth wireless technology . p The registered device must be selected as the priority device. = F or details, refer to Registering your Bluetooth devices on page 26.
p The iPhone keyboard layouts that can be selected by tapping depends on the setting for Hardware Keyboard Layout set on your iPhone. 6 Switches to a keyboard offering numeric characters and symbols.
1 Connect your iPhone. = F or details of the connections, refer to the Installation Manual. 2 Press the HOME button to display the T op menu screen. 3 T ouch [APPS]. A message, which notifies you that your iPhone can launch the application, appears on the screen.
= F or details of the connections, refer to the Installation Manual. 2 Press the HOME button to display the T op menu screen. 3 T ouch [APPS]. The image in your smartphone appears on the screen. 4 Launch an application on your smart- phone. An image of the application appears on the screen.
p If Android Auto is turned on during a call on a mobile phone other than the Android Auto -compatible device, the Bluetooth con- nection will be terminated after the call ends. 4 Operate the application. = F or details on adjusting the volume, refer to Adjusting the volume on page 83.
Using the touch panel keys (App control side bar) 1 3 2 4 5 6 1 Displays the source list. = For details, refer to Selecting a fr ont source on the sour ce list on page 22. 2 Displays the launcher application screen. 3 Displays the previous screen. p Depending on the type of MirrorLink device, this key is not available.
1 2 3 1 T ouch to mute. T ouch again to unmute. 2 Sets whether to switch the sound mix func- tion on or off . ! Left tab: The audio mix function is en- abled (mix on). The App volume is dis- played. If you touch the App volume, the volume keys will be displayed.
WARNING Certain uses of an iPhone or a smartphone may not be legal while driving in your juris- diction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing.
Indicator Meaning T ouching the key retweets the selected tweets with your T witter account. T ouching the key per forms fast reverse of the current content for 30 seconds. T ouching the key “ dislikes ” the current content. p Depending on the content, touching or cancels “ dislikes ” .
= F or details of the Bluetooth connection, refer to Registering your Bluetooth de- vices on page 26. p The cable connection method varies de- pending on your device. = F or details of the connections, refer to the Installation Manual. 3 Display the AV source selection screen.
Y ou can control a Bluetooth audio player . p Before using the Bluetooth audio player , you must register and connect the device to this product. = For details, refer to Registering your Bluetooth devices on page 26. p Operations may var y depending on the Bluetooth audio player .
a Plays files in random order . = For details, refer to Playing files in ran- dom or der on page 91. b Sets a repeat play range. = For details, refer to Setting a r epeat play range on page 91.
Selecting files from the file name list The file name list lets you see the list of track titles for the Bluetooth audio player and lets you select one of them to play back. p This function is only available when the connected Bluetooth audio player supports AVRCP 1.
Y ou can display the video image output by the device connected to this product. This section describes operations for an HDMI source. p A High Speed HDMI ® Cable (sold sepa- rately) is required for connection. = For details of the connection method, refer to the Installation Manual.
Y ou can display the video image output by the device connected to this product. This section describes operations for an AUX source. p A Mini-jack AV cable (CD -RM10) (sold sepa- rately) is required for connection. = For details of the connection method, refer to the Installation Manual.
6 T ouch [AUX] on the AV source selection screen. The image is displayed on the screen. 7 Use the touch panel keys on the screen to control the exter nal unit. = F or details, refer to Using the touch panel keys on page 93. Setting the video signal When you connect this product to an AUX equipment, select the suitable video signal setting.
Y ou can display the video image output by the device connected to this product. = For details of the connection method, refer to the Installation Manual. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. T o view video images, you must stop in a safe place and apply the handbrake.
8 Use the touch panel keys on the screen to control the exter nal unit. = F or details, refer to Using the touch panel keys on page 95. Setting the video signal When you connect this product to an AV equipment, select the suitable video signal setting.
MIXTRAX is original technology for creating non-stop mixes of selections from your audio librar y , complete with DJ effects that make them sound as if a DJ is right there with you playing the music. p Y ou can turn MIXTRAX on by touching [ MIXTRAX ] on the playback screen of com- pressed audio files.
1 T ouch the following key . Displays the playback list screen. 2 T ouch the following key . Displays the “ Playback not al- lowed ” screen. 3 T ouch [Songs], [Artists] or [Albums]. 4 T ouch the box on the left of the item or song that you do not want to play .
Setting the FM tuning step Depending on the region, the tuning step can be changed. The FM tuning step can be switched between 100 kHz and 50 kHz. p This setting is available when the source is turned off. 1 Press the HOME button to display the T op menu screen.
The “ System ” screen appears. 3 T ouch [Input/Output Settings]. 4 T ouch [AV Input]. The pop-up menu appears. 5 T ouch the item you want to set. ! Off (default): Deactivates the AV source. ! Source : Displays the video image output by the con- nected external device.
Setting the polarity of the rear view camera 1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order . The “ System ” screen appears. 3 T ouch [Camera settings]. 4 T ouch [Camera Polarity] repeatedly until the desired setting appears.
2 T ouch the following keys in the follow- ing order . The “ System ” screen appears. 3 T ouch [Camera settings]. 4 T ouch [Camera View] repeatedly until the desired setting appears. ! Off (default): T urns the camera view setting off. ! On : T urns the camera view setting on.
! The range projected by the rear view camera is limited. Also, the vehicle width and distance guidelines displayed on the rear view camera image may differ from the actual vehicle width and distance.
2 T ouch the following keys in the follow- ing order . The “ System ” screen appears. 3 T ouch [Camera settings]. 4 T ouch [2nd Camera Input] repeatedly until the desired setting appears. ! Off (default): T urns the second camera input setting off .
2 T ouch the following keys in the follow- ing order . The “ System ” screen appears. 3 T ouch [Demo Mode] repeatedly until the desired setting appears. ! On (default): Displays the demo screen. ! Off : Hides the demo screen. # Y ou can also turn off the demo screen by pressing and holding the MUTE button.
Setting the keyboard language with the application for iPhone Y ou can use the keyboard in AppRadio Mode by setting the language of the keyboard for iPhone . p This function is only available in AppRadio Mode on the iPhone. 1 Press the HOME button to display the T op menu screen.
# If you press and hold the HOME button, the adjustment is cancelled. 8 Press and hold the HOME button. The adjustment results are saved. Setting the dimmer function Y ou can specif y the timing that the dimmer function is to be turned on. 1 Press the HOME button to display the T op menu screen.
2 T ouch the following keys in the follow- ing order . The “ System ” screen appears. 3 T ouch [Dimmer Settings]. 4 T ouch [Dimmer Duration]. The duration setting bar appears. 5 T ouch the desired points on the dura- tion setting bar , or slide the cursors to spe- cify the start time and the end time, respectively .
Each time you touch the key, the level of the selected item increases or decreases. p “ Brightness ” , “ Contrast ” , “ Colour ” and “ Hue ” can be adjusted from “ -24 ” to “ +24 ” . p “ Dimmer Level ” can be adjusted from “ +1 ” to “ +48 ” .
5 T ouch the following keys in the follow- ing order . The “ System ” screen appears. 6 T ouch [System Information]. 7 T ouch [Firmware Update]. The “ Firmware Update ” screen appears. 8 T ouch [Continue] to display the data transfer mode. p Follow the on-screen instructions to finish updating the firmware.
Using fader/balance adjustment Y ou can select a fader/balance setting that provides an ideal listening environment in all occupied seats. p This function is available only when main audio is available. p This function is available only when “ Rear Speaker ” is set to “ On ” .
4 T ouch the following keys to adjust the left/right speaker balance. Moves towards the left. Moves towards the right. Each time you touch the keys, the left/right speaker balance moves towards the lef t or right. p “ Left25 ” to “ Right25 ” is displayed as the left/right speaker balance moves from the left to right.
The following AV sources are set to the same source level adjustment volume automatically. Required cable (sold separately) Smartphone Setup AV sources Device Connection iP od / iPhone with a 30-pin c.
Adjusting the filter The following adjustments can be made dur- ing filter adjustments. Make the appropriate adjustments for the reproduced frequency band and characteristics of the connected speaker unit.
5 T ouch the following keys to select “ Subwoofer ” . Selects the adjus table previous speak- er . Selects the adjus table next speaker . 6 T ouch [LPF] to tur n on. 7 T ouch the following keys to select the phase of subwoofer output. Sets the phase of subwoofer output to normal.
3 T ouch [Speaker Level]. The “ Speaker Level ” screen appears. 4 T ouch the following keys to select the listening position if necessary . Selects the listening position. ! Off : Changes the listening position setting to off . ! Front Left : Changes the listening position setting to front left.
3 T ouch the following keys in the follow- ing order . The “ Audio ” screen appears. 4 T ouch [Time Alignment]. The “ Time Alignment ” screen appears. 5 T ouch the following keys to select the listening position if necessary . Selects the listening position.
Recalling equaliser curves There are seven stored equaliser cur ves that you can easily recall at any time. Here is a list of the equaliser cur ves: Equaliser curve S.Bass is a cur ve in which only low-pitched sound is boosted. Powerful is a curve in which low- and high-pitched sounds are booste d.
= For details of the operations, refer to Adjust- ing the equaliser cur ve automatically (Auto EQ) on page 119. p T o manually adjust the equaliser cur ve, set “ Auto EQ&T A ” to “ Off ” . 1 Press the HOME button to display the T op menu screen.
— The LPF on active subwoofers or exter- nal amps delay the lower sounds. ! If an error occurs during measurement, a message appears and measurement is cancelled.
12 Exit the vehicle and keep the doors closed until the countdown finishes. When the countdown finishes, a measure- ment tone (noise) is emitted from the speakers and the Auto EQ measurement begins. 13 W ait until the measurement is com- pleted. When Auto EQ is completed, a message is dis- played indicating that the measurement is completed.
Selecting the background display The background display can be selected from 8 different preset displays for the AV operation screen and 5 different preset displays for the T op menu screen. Furthermore, you can change the background display to other images imported from an external storage de- vice (USB, SD).
p Y ou can delete the imported image and re- store the setting for the background display to the default by touching and holding the custom key . Setting the illumination colour The illumination colour can be selected from 5 different colours. Furthermore, the illumina- tion can be switched between these 5 colours in order .
Selecting the theme colour A theme colour can be selected from 5 differ- ent colours. 1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order .
Changing to the splash screen stored on the external storage device (USB, SD) Y ou can change the splash screen to other images imported from the external storage de- vice (USB, SD). CAUTION Do not turn off the engine while importing an image from the external storage device (USB, SD).
5 T ouch the desired item. ! Illumination : Selects the illumination colour setting. ! Splash Screen : Selects the splash screen setting. ! Select All : Selects all settings. 6 T ouch [Export]. Data export starts. After the data is exported, a completion mes- sage appears.
Setting the top-priority languages Y ou can assign the top-pri ority language to the top-priority subtitle, audio and menu in initial playback. If the selected language is recorded on the disc, subtitles, audio and menu are dis- played or output in that language.
The “ Video Setup ” screen appears. 3 T ouch [DVD/DivX Setup]. 4 T ouch [Menu Language]. The pop-up menu appears. 5 T ouch the desired language. When you select “ Others ” , a language code input screen is shown. Input the four-digit code of the desired language then touch .
p When playing discs that do not have a pan- scan system, the disc is played back with “ Letter Box ” even if you select the “ Pan Scan ” setting. Confirm whether the disc package bears the mark. p The TV aspect ratio cannot be changed for some discs.
Displaying your DivX VOD registration code If you want to play DivX VOD (video on de- mand) content on this product, you must first register this product with your DivX VOD con- tent provider . Y ou do this by generating a DivX VOD registration code, which you submit to your provider .
4 T ouch [DVD Auto Play] repeatedly until the desired setting appears. ! Off (default): T urns the DVD Auto Play setting off. ! On : T urns the DVD Auto Play setting on. Setting the video signal for the r ear view camera When you connect a rear view camera to this product, select the suitable video signal set- ting.
Registering your favourite menu items in shortcuts allows you to quickly jump to the re- gistered menu screen by a simple touch on the “ Favorites ” screen. p Up to 12 menu items can be registered in the favourite menu. Creating a shortcut 1 T ouch the HOME button to display the T op menu screen.
By connecting the optional Vehicle Bus adap- ter , you can display the operation status of the vehicle ’ s parking sensor function and climate control panel on the screen. CAUTION ! For information on installing the V ehicle Bus adapter , see the operating manual of the Vehi- cle Bus adapter .
a9 b c 6 8 7 3 45 2 1 1 Displays that the rear window heating setting is on. 2 Displays that the front window heating setting is on. 3 Displays that the internal circulation mode setting is on. 4 Displays that the A/C setting is on. 5 Displays that the dual A/C function is on.
Setting the time and date 1 T ouch the current time on the screen to display the Time and date setting screen. 2 T ouch a or b to set the correct time and date. On this screen, you can operate the following items. Month/Date ! d/m/y (default): Changes the date display format to date/ month/year .
6 T ouch the touch panel key on which song information is displayed. The information on the song on air is stored in this product. While the information is being acquired, is displayed. When it is completed, turns off and is displayed. p The song information for up to 50 songs can be stored in this product.
p This setting is for video only . ! Normal A 4:3 picture is displayed normally , giving you no sense of disparity since its propor- tions are the same as those of the normal picture. ! T rimming An image is displayed across the entire screen with the horizontal-to-vertical ratio left as is.
Selecting the video for the rear display Y ou can choose either to show the same image as the front screen or to show the se- lected source on the rear display. p This function is not available during a call via this product or while using the voice re- cognition function.
3 T ouch Area1, followed by Area2, and then touch and hold Area3. Area1 Area2 Area3 The “ Anti-theft Setting Menu ” screen ap- pears. 4 T ouch [Set Password]. The “ Password Entry ” screen appears. 5 Enter the password you want to set. p 5 to 16 characters can be entered for a password.
8 T ouch [Go]. A message indicating that the security setting is cancelled appears. Forgotten password Contact the nearest authorised Pioneer Ser- vice Station. Restoring this product to the default settings Y ou can restore settings or recorded content to the default settings.
T roubleshooting If you have problems operating this product, refer to this section. The most common problems are listed below , along with likely causes and solutions. If a solution to your problem cannot be found here, contact your dealer or the nearest authorised Pioneer ser vice facility .
Symptom Cause Action (Reference) Playback is not with the audio language and subti tle language settings selected in “ DVD/DivX Setup ” . The DVD playing does not feature dialogue or subtitles in the lan- guage selected in “ DVD/Di vX Setup ” .
Symptom Cause Action The smartphone was not charged. Charging stopped because the tem- perature of the smartphone rose due to prolonged use of the smart- phone during charging. Disconnect the smartph one from the cable, and wait until the smartphone cools down.
Disc Message Cause Action (Reference) Error -02-XX/ FF-FF The disc is dirty. Clean the disc. The disc is scrat ched. Replace the disc. The disc is loaded upside down. Check that the disc is loaded correctly. There is an elect rical or mechanical error .
Message Cause Action (Reference) Protect All the files on the connected exte r- nal storage device (USB, SD) are embedded with DRM. Replace the external storage device (USB, SD). Incompatible USB The connected USB storage device is not supported by this product.
Message Cause Action Memory full. Connect iPod. The tag information is successfully stored. The flash memor y of this product has become full. The tag information on this product is trans- ferred to the iPod automatically when an iPod is connected. Memory full.
MirrorLink Message Cause Action The application list could not be read out. F ailed to load the application list. ! Disconnect the cable from the smartphone, and then connect the smartphone ag ain after a few seconds. ! T urn the ignition switch to OFF and then to ON.
! When using discs that can be printed on label sur faces, check the instructions and the warnings of the discs. Depending on the discs, inserting and ejecting may not be possible. Using such discs may result in damage to this equipment. ! Do not attach labels, write on or apply che- micals to the sur face of the discs.
Dolby Digital This product will down-mix Dolby Digital sig- nals internally and the sound will be output in stereo. p Manufactured under licence from Dolby Laboratories.
! There may be a slight delay when starting playback of files on an external storage de- vice (USB, SD) with complex folder hierar- chies. ! Operations may var y depending on the kind of an external storage device (USB, SD).
! Plays all versions of DivX video, except for DivX 7 with standard playback of DivX media files. ! F or more details about DivX, visit the follow- ing site: http://www .divx.com/ DivX subtitle files ! Srt format subtitle files with the extension “ .
Media compatibility chart General Media CD-R/-RW DVD-R/-R SL/-R DL/DVD -RW USB storage de- vice SD memory card File system ! ISO9660 level 1 ! ISO9660 level 2 ! Romeo, Joliet ! UDF 1.02 / 1.50 / 2.00 / 2.01 / 2.50 ! ISO9660 level 1 ! ISO9660 level 2 ! Romeo, Joliet ! UDF 1.
WMA compatibility Media CD-R/-RW DVD-R/-R SL/-R DL/DVD -RW USB storage de- vice SD memory card File exte nsion .wma Bit rate 5 kbps to 320 kbps (CBR), VBR Sampling frequency 8 kHz to 48 kHz Note: This.
DivX compatibility Media CD-R/-RW DVD-R/-R SL/-R DL/DVD -RW USB storage de- vice SD memory card File exte nsion .avi/.divx DivX files on the external storage device (USB, SD) cannot be played. Profile (DivX version) Home Theater Ver . 3.11/Ver . 4.x/V er .
Video files compatibility (USB, SD) File extension .avi .mkv .mov .f4v .mp4 Compatible video codec MPEG-4, H.264, H.263, Xvid MPEG-4, H.264, VC -1, Xvid MPEG-4, H.
Example of a hierarchy Note This product assigns folder numbers. The user cannot assign folder numbers. Bluetooth ! The Bluetooth ® word mark and logos are re- gistered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PIONEER CORPORATION is under licence.
Google, Google Play , Android ™ , and Android Auto Google, Google Play, Android, Android Auto and other marks are trademarks of Google Inc. MirrorLink MirrorLink Certified ™ , the Design Only ™ Certifi- cation Logo, MirrorLink ™ and the MirrorLink ™ Logo are certification marks and trademarks of the Car Connectivity Consortium LLC.
Lightning Lightning is a trademark of Apple Inc. App Store App Store is a ser vice mark of Apple Inc. iOS iOS is a trademark on which Cisco holds the trademark right in the US and certain other countries. iT unes iT unes is a trademark of Apple Inc., registered in the U.
HDMI The terms HDMI and HDMI High-Definition Multimedia Inter face, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. MHL MHL, the MHL Logo, and Mobile High-Defini- tion Link are trademarks or registered trade- marks of MHL, LLC in the United States and other countries.
! The LCD screen is exposed in order to in- crease its visibility within the vehicle. Please do not press strongly on it as this may damage it. ! Do not push the LCD screen with excessive force as this may scratch it. ! Never touch the LCD screen with anything besides your finger when operating the touch panel functions.
Specifications General Rated power source ............... 14.4 V DC (allowable voltage range: 12.0 V to 14.4 V DC) Earthing system ....................... Negative type Maximum current consumpti on ........................................... 10.0 A Dimensions (W × H × D): DIN Chassis .
AAC decoding forma t ............ MPEG -2 AAC -LC, MPEG-4 AAC -LC WAVE signal format ............... Linear-PCM H.264 video decoding format ..................................................... BaseLine Profile, Main Pro- file, High Profile WMV video decoding format .
Engb 163.
Ein wichtiger Punkt beim Kauf des Geräts Pioneer AVH-X8700BT (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pioneer AVH-X8700BT noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pioneer AVH-X8700BT - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pioneer AVH-X8700BT reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pioneer AVH-X8700BT erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pioneer AVH-X8700BT besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pioneer AVH-X8700BT verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pioneer AVH-X8700BT. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pioneer AVH-X8700BT gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
