Benutzeranleitung / Produktwartung AVH-5400DVD des Produzenten Pioneer
Zur Seite of 71
Owner ’ s Manual D VD RDS A V RECEIVER A VH-5400D VD English.
Thank you for purchasing this PIONEER product. T o ensure proper use , please read through this manual before using this product. It is especially important th at you read and obser ve WARNING s and CAUTION si n this manual. Please keep the ma nual in a safe and acce ssible place for future r efer- ence.
Changing the wide screen mode 26 Menu operations Introduction of menu operations 28 Audio Adjustments 29 Setting up the DVD player 32 System settings 36 Entertainment settings 42 Customizing menus 43 .
IMPORT ANT SA FEGUARDS Please read all of these instructions regarding your display and retain them for future refer- ence. 1 Read this manual fully and carefully be- fore operating your display . 2 Keep this manual handy as a reference for operating procedur es and safety informa- tion.
When using a display connec ted to REAR MONITOR OUTPUT P assengers in the rear seat can also watch moving images or still images if you connect this unit to a display using the REAR MONI- TOR OUTPUT . WARNING NEVER install the rear display in a location where the driver can watch a DVD while driving.
If you want to dispose this product, do not mix it with general household waste. There is a se- parate collection system for used electronic products in accordance with legislation that re- quires proper treatment, recover y and recy- cling.
Protecting your unit from theft The front panel can be detached to deter theft. ! If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone will sound. ! Y ou can turn off the warning tone. Refer to Switching the warning tone on page 39.
Adjusting the response positions of the touch panels (T ouch Panel Calibration) If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response po - sitions of the touch panel. Refer to Adjusting the r esponse positions of the touch panels (T ouch P anel Calibration) on page 44.
Head unit Part Part 1 V olume/ MUTE 8 OPEN/CLOSE 2 MENU Displaying the menu. Returning to the normal display. 9 AUX input jack (3.5 mm stereo/ video jack) Use to connect an auxiliar y device. 3 MODE T urning the infor- mation display off. a Auto EQ micro - phone input jack Use to connect an auto EQ micro - phone.
Basic operations of this unit Wed 28 May 12:45 PM 1 2 Radio Disc SD AUX SD Rear View 35 4 T ouch panel keys 1 Displaying the source menu. 2 Wed 28 May 12:45 PM Switching to clock adjust- ment display. Refer to Setting the clock on page 12. 3 Radio Source icon Selecting a favorite source.
1 Scroll icon Appears when selectable items are hidden. 2 Scrubber bar Appears when the playback point can be spe- cified or set by dragging. Viewing the hidden item s 1 T ouch the scroll ico n or drag the scrubber bar to view any hidden items. ! Also, you can drag the list to view any hidden items.
Displaying still images as a slide show when listening to another source. Viewing slide shows. Refer to Introduction of still image playback operations on page 18. Returning to the previous display. Returning to the previous list/cate- gor y (the folder/categor y one level higher .
Introduction of tuner operations Abcdeabcdeabcde Wed 28 may 12:45 PM 87.50 MHz P .CH 2 MHz Band: FM1 Abcdeabcdeabcde TA News Local Radio 87.50 6 1 2 3 4 8 5 7 T ouch panel keys 1 T urning local seek tuning on and off. Refer to T un ing in to str ong signals on page 20.
Introduction of video playback operations Y ou can view DVD/DVD-R/DVD-RW/CD/CD -R/ CD-RW/USB/SD. DVD video Return Wed 28 May 12:45 PM 01 01 81 2 01:45 -02:45 01 L+R Video CD R etu r n When playing a disc containing a mixture of various media file types 01:45 -02:45 T ouch panel keys 1 Selecting the repeat range.
d Stopping playback. Stopping playback at the point set in Resume play- back. T ouch one more time to stop playback completely when playing DivX. Refer to Resume playback (Bookmark) on page 23. e Displaying arrow keys to op- erate the DVD menu. Refer to Using the arrow k eys on page 22.
Introduction of sound playback operations Y ou can listen to DVD -R/DVD-RW/CD/CD-R/ CD-RW/USB/SD sound files. Audio CD Abcdeabcdeabcdeabcdeab Wed 28 May 12:45 PM 125 01:45 ROM ALL On/Off S.Rtrv -02:45 Abcdeabcdeabcdeabcdeab Abcdeabcdeabcdeabcdeab 87 6 1 2 3 4 9 7 5 8 T ouch panel keys 1 Selecting the repeat range.
! If the characters recorded on the disc are not compatible with this unit, those characters will not be displayed. ! Disconnect the USB portable audio player/ USB memory when you are done using it. ! When you select Clock or Speana on Select- ing the background display on page 43, the art- work is not displayed.
Introduction of still image playback operations Y ou can view still images saved in CD -R/CD- RW/USB/SD. CD Capture Photo Wed 28 May 12:45 PM Abcdeabcdeabcde Abcdeabcdeabcde Full Off 2 2 5 1 2 34 7 6 .
Introduction of still image playback as a slideshow operations Y ou can view still images saved in CD -R/CD- RW/USB/SD as a slideshow when listening to another source. Capture Full Off 8 2 1 6 3 7 45 The table below shows the controls for viewing a slideshow .
Storing and recalling stations Y ou can easily store up to six stations for each band as presets. ! Six stations for each band can be stored in memor y . 1 Display the preset screen. Refer to Introduction of tuner operations on page 13. The preset screen appears in the display.
1 T une in to a TP or enhanced other net- work ’ s TP station. indicator lights up. 2 T ur n T raffic announcement on. Refer to Introduction of tuner operations on page 13. # If the T A function is turned on when you are not tuned in to a TP or enhanced other network ’ s TP station, the indicator lights up dimly.
Switching the media file type When playing a disc containing a mixture of various media file types, such as DivX and MP3, you can switch between media file types to play. Audio data (CD-DA) and JPEG picture files on DVD-R/RW/ROM cannot be played back on this unit.
! When playing discs with compressed audio and audio data (CD-DA), playback is re- peated within the type of data currently playing even if Disc is selected. ! If you select another folder during repeat play , the repeat play range changes to Disc . If you select USB or SD source, the repeat play range changes to All .
Changing audio language during playback (Multi-audio) With DVDs/DivX files that provides audio play- back in different languages and different audio systems (Dolby Digital, DTS, etc.
PBC playback (F unction for Video CDs) During playback of Video CDs featuring PBC (Playback Control), PBC ON is displayed. 1 Start the search function. Refer to Playing moving images on page 14. 2 T ouch 10key to display the numeric keypad. 3 T ouch 0 to 9 corresponding to a menu number .
! If there is no limit to the number of times the DivX VOD content can be viewed, then you may load the disc into your player and play the content as often as you like, and no message will be displayed. ! Y ou can confirm the number of times that the content can be played by checking the number displayed after Remaining Views: .
Zoom (zoom) The 4:3 picture is enlarged in the same proportion both vertically and horizontally ; ideal for a cinema sized picture (wide screen picture). Normal (normal) The 4:3 picture is displayed as it is, giving you no sense of disparity since its proportions are the same as that of the normal picture.
Introduction of menu operations Audio Fader/Balance F/R 0 L/R 0 Super Bass On High Off L/R 0 Graphic EQ Auto EQ Sonic Center Control Loudness Subwoofer 5 4 3 21 1 Display menus. Refer to Common operations for menu set- tings/lists on page 11. 2 T ouch any of the following touch panel keys to select the menu to be adjusted.
Audio Adjustments Note When selecting FM as the source, you cannot switch to Source Level Adjuster . Using fade r/balance ad justment Y ou can change the fader/balance setting to provide an ideal listening environment for all of the occupied seats. 1 Display the audio function menu.
2 T ouch Graphic EQ on the audio function menu. 3 T ouch c or d to select the desired item. Powerful — Natural — V ocal — Custom1 — Custom2 — Flat — Super Bass 4 T ouch the Equalizer band to adjust. 5 T ouch a or b to adjust the level of the equalizer band.
Boosting the bass Y ou can boost the bass level. 1 Display the audio function menu. Refer to Introduction of menu operations on page 28. 2 T ouch c or d to select a desired level.
Setting up the DVD player Setting the subtitle language Y ou can set a desired subtitle language. When available, the subtitles will be displayed in the selected language. 1 Display the Video Setup menu. Refer to Introduction of menu operations on page 28.
Setting the multi-angle DVD display The angle icon can be set so it appears on scenes where the angle can be switched. 1 Display the Video Setup menu. Refer to Introduction of menu operations on page 28. 2 T ouch Multi Angle on the Video Setup menu to turn angle icon display on or off.
Setting the code number and level A code number must be registered in order to play back discs with parental lock. 1 Display the Video Setup menu. Refer to Introduction of menu operations on page 28. 2 T ouch Parental on the Video Setup menu. 3 T ouch 0 to 9 to input a four digit code number .
2 T ouch DivX Subtitle on the Video Setup menu to select the desired subtitle setting. ! Original – Display the DivX subtitles ! Custom – Display the DivX external subti- tles Notes ! Up to 42 characters can be displayed on one line. If more than 42 characters are set, the line breaks and the characters are displayed on the next line.
System settings Switching the auxiliary setting Activate this setting when using an auxiliar y device connected to this unit. 1 Display the system menu. Refer to Introduction of menu operations on page 28. 2 T ouch AUX Input on the system menu to tur n AUX Input on or off.
3 T ouch FM Step on the system menu to select the FM tuning step. T ouching FM Step will switch the FM tuning step between 50 kHz and 100 kHz. The se- lected FM tuning step will appear .
Notes ! When Mute is displayed, the sound is turned off and no audio adjustments can be made. ! When AT T is displayed, the sound is attenu- ated and only the volume can be adjusted. (No other audio adjustments can be made.) Selecting the menu language The menu language can be selected from four languages.
! When adjusting the LCD panel angle, be sure to touch and hold OPEN/CLOSE . F orcibly ad- justing the LCD panel by hand may damage it. 1 Display the system menu. Refer to Introduction of menu operations on page 28. 2 T ouch Display Tilt. 3 T ouch the Display Tilt keys to adjust the LCD panel to an easily viewable angle.
2 T ouch Camera Polarity on the system menu to select the appropriate setting. ! Battery – When the polarity of the con- nected lead is positive while the gear shift is in REVERSE (R) position ! Gro.
Before operating the auto EQ function ! Carr y out auto EQ in as quiet a place as possible, with the car engine and air condi- tioning switched off . Also cut power to car phones or portable telephones in the car , or remove them from the car before carr ying out auto EQ.
8 When the 10-second countdown starts, get out of the car and close the door within 10 seconds. A measurement tone (noise) is emitted from the speakers, and auto EQ measurement be- gins.
Selecting the OSD color The OSD color can be changed. 1 Display the entertainment menu. Refer to Introduction of menu operations on page 28. 2 T ouch Appearance. 3 T ouch Screen. 4 T ouch one of the colors on the list. Selecting the background display Y ou can switch the background that is dis- played when listening to a source.
Changing the picture adjustment Y ou can adjust the Brightness (brightness), Contrast (contrast), Color (color) , Hue (hue), Dimmer (dimmer), T emperature (tempera- ture) and Black Level (black level) for each source and rear view camera. ! Y ou cannot adjust Color , Hue and Black Level for the audio source.
3 Press and hold MENU to start T ouch Panel Calibration. The 4-point touch panel adjustment screen ap- pears. 4 T ouch each of the arrows on the four corners of the screen. # T o cancel the adjustment, press and hold MENU . 5 Press MENU to complete 4-point adjust- ment.
Connecting the units WARNING ! T o avoid the risk of accident and the potential violation of applicable laws, no viewing of front seat video should ever occur while the vehicle is being driven. Also, rear displays should not be in a location where they are visi- bly distracting to the driver .
— Never wire the negative speaker cable di- rectly to ground. — Never band together negative cables of multiple speakers. ! When this unit is on, control signals are sent through the blue/white cable. Connect this cable to the system remote control of an exter- nal power amp or the vehicle ’ s auto-antenna relay control terminal (max.
Connecting the power cord This product Speaker leads White: F ront left White/black: F ront left Gray: F ront right Gray/black: F ront right Green: Rear lef t or subwoofer Gree.
Antenna input Notes: · Change the initial setting of this unit. The subwoofer output of this unit is monaural. · When using a subwoofer of 70 W (2 Ω ) , be sure to connect with Violet and Violet/black leads of this unit. Do not connect anything to Green and Green/black leads.
When connecting to separately sold power amp This product Rear output or subwoofer output ( REAR OUTPUT or SUBWOOFER OUTP UT ) F ront output ( FRONT OUTPUT ) 13 cm 13 cm Blue/white Connect to system control terminal of the power amp (max.
When connecting the external video component and the display This product External video component (sold separately) RCA cables (sold separately) Audio inputs ( AUDIO INPUT ) Video input ( VIDEO INPUT.
When connecting with a rear view camera When this product is used with a rear view camera, it is possible to automatically switch from the video to rear view image when the gear shif t is moved to REVERSE (R). WARNING USE INPUT ONL Y FOR REVERSE OR MIR- ROR IMAGE REAR VIEW CAMERA.
Installation Notes ! Check all connections and systems before final installation. ! Do not use unauthorized parts as this may cause malfunctions. ! Consult your dealer if installation requires dril- ling of holes or other modifications to the vehi- cle.
1 Side bracket (small) 2 Flush sur face screw (5 mm × 6 mm) 2 Install the unit into the dashboard. Insert the mounting sleeve into the dashboard. And then secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place.
T roubleshooting Common Symptom Cause Action (Refer- ence page) The power will not turn on. The unit will not operate. Leads and con- nectors are incor- rectly connected. Confirm once mor e that all connec- tions are correct. The fuse is blown. Rectify the cause and then replace the fuse.
Symptom Cause Action (Refer- ence page) The repeat range changes automatically. Another folder was selected dur- ing repeat play. Select the repeat range again. T rack search or fast for ward/re- verse was per- formed during file repeat play. Select the repeat range again.
Error messages When you contact your dealer or your nearest Pioneer Ser vice Center , be sure to note the error message. T uner Message Cause Action No Data This unit cannot receive program ser vice name in- formation. Move to the d esir- able location with good reception.
Message Cause Action Format Read Sometimes there is a delay be- tween the start of playback and when you start to hear any sound. W ait until the mes- sage disappears and you hear sound. Skipped The connected external storage device contains WMA files that are protected by Windows Med- ia ä DRM 9/10.
Message Cause Action Format Read Sometimes there is a delay be- tween the start of playback and when you start to hear any sound. W ait until the mes- sage disappears and you hear sound. Video frame rate not sup- ported. DivX file ’ s frame rate is more than 30 fps.
Indicator list Area 1 Area 2 Area 3 Area 1 Indicates that a radio text has been received. Indicates that TA (traffic an- nouncement standby) is on. Indicates that the news program interruption is on. Indicates that the digital format is Dolby Digital.
Handling guidelines Discs and player Use only discs featuring any of following logos. Use 12-cm discs. Do not use 8-cm discs or an adapter for 8-cm discs. Use only convention al, fully circular discs. Do not use shaped discs. Do not insert anything other than a DVD (-R/-RW) or CD (-R/-RW) into the disc loading slot.
SD memory card This unit supports only the followi ng types of SD memor y cards. ! SD ! SDHC Keep the SD me mor y card out of the reach of chil- dren. Should the SD memor y card be swallowed, con- sult a doctor immediately. Do not touch the connectors of the SD memor y card directly with your fingers or with any metal device.
Only DivX files downloaded from a DivX partner site are guarantee for proper operation. Unauthorize d DivX files may not operate prope rly . DRM rental files cannot be operated until playback is started. Recommended file size: 2 Mbps or less with a tran s- mission rate of 2 GB or less.
Disc Playable folders: up to 700 Playable files: up to 999 for CD -R/CD-RW Playable files: up to 3 500 for DVD -R/DVD-RW File system: ISO 9660 Level 1 and 2, Romeo, Joliet, UDF 1.
Using the display correctly CAUTION ! If liquid or foreign matter should get inside this unit, turn off the power immediately and consult your dealer or the nearest authorized PIONEER Ser vice Station. Do not use the unit in this condition because doing so may result in fire, electric shock, or other failure.
Copyright and trademark This item incorporates copy protection tech- nology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disas- sembly are prohibited. DVD video is a trademark of DVD Format/Logo Licensing Corporation.
Language code chart for DVD Language (code), input code Japanese (ja), 1001 Dzongkha (dz), 0426 Kurdish (ku), 1121 Kinyarwanda (rw), 1823 English (en), 0514 Ewe (ee), 0505 Komi (kv), 1122 Sanskrit (sa.
Specifications General P ower source ............................. 14.4 V DC (12.0 V to 14.4 V allowable) Grounding system ................... Negative type Maximum current consumpti on ..................................................... 10.0 A Dimensions (W × H × D): DIN Chassis .
WMA decoding forma t ......... V er . 7, 7.1, 8, 9, 10, 11, 12 (2 ch audio) (Windows Media Player) AAC decoding forma t ............ MPEG-4 AAC (iT unes en- coded only) (V er . 9.0.3 and earlier) DivX decoding forma t ............ Home Theater Ver . 3, 4, 5.
En 70.
En 71.
Ein wichtiger Punkt beim Kauf des Geräts Pioneer AVH-5400DVD (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pioneer AVH-5400DVD noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pioneer AVH-5400DVD - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pioneer AVH-5400DVD reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pioneer AVH-5400DVD erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pioneer AVH-5400DVD besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pioneer AVH-5400DVD verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pioneer AVH-5400DVD. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pioneer AVH-5400DVD gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
