Benutzeranleitung / Produktwartung SIRD-FTA des Produzenten Pico Macom
Zur Seite of 52
www . picomacom .com Installation and Operation Manual Br inging Y ou the World of F ree Satellite Enter tainment.
1. General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 Saf ety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 General Features . . . . . . . . . .
1.1 Safety Instructions Read the f ollowing recommended saf ety precautions before using this Receiver . Ref er to other provided manuals and instructions f or equipment that will be connected to this Receiver . Placing the Receiver < Place the Receiver indoors to pre vent e xposure to lightning, rain and direct sunlight.
1.2 General Features Note: The features of your Receiver may differ from those listed below , depending on where you purchased your Receiver . Not all of these features may be available.
1.3 Accessories Package Contents: < Digital Satellite Receiver < Remote Control < A udio/Video Cable < User’ s Manual < Maintenance Card Throughout this manual y ou will notice that the operation of y our Receiver is based on a series of user-fr iendly on-screen displa ys and menus.
2.1 Front Panel 1. POWER: T urns on the wor king mode or puts the Receiver in standb y mode. 2. Displa y (4-Digit/7-Segment): Indicates operating status of the Receiver . 3. Remote Sensor : Detects infrared signal from remote control. 4. VOL+/–: Changes volume and settings or mo ves cursor in the menus .
2.2 Rear Panel Note: The r ear panel on your Receiver may differ from the one pictured and described in this manual, depending on wher e you purchased your Receiver . Not all of the ports pictured in this section may be available. lf you need assis- tance in identifying your specific equipment configuration, contact your authorized dealer .
2.3 Remote Control Unit 8 2.3 Remote Control Unit CONTROLS AND FUNCTIONS.
2.3 Remote Control Unit Note: The remote control for your Receiver may differ slightly from the one pictured and described in this manual, depending on where you purchased your Receiver . lf you need assistance in identifying the remote control buttons for specific commands, contact your authorized dealer .
3.1 Connecting to Antenna and Dish This Receiver w or ks only with a satellite dish that can access free-to-air pro- gramming. The diagram belo w shows the basic connections required for the satellite LNB, TV and other possible connections on the rear panel.
3.2 Connecting to TV and VCR using SCART Support Note: These instructions apply to a Receiver with both TV and VCR SCART ports. lf you need assistance in identifying your specific equipment configura- tion, contact your authorized dealer . Instructions: 1.
3.3 Connecting to TV and VCR using RCA Support Instructions: 1. Connect satellite input cable to Receiv er’ s “IF In. ” 2. Match colors of three-plug RCA cable to Receiv er’ s RCA video and audio outputs and plug them in. Then connect cable to matching colors on TV’ s video and audio inputs .
3.4 Connecting to TV and VCR using RF Support and RCA Instructions: 1. Connect satellite input cable to Receiv er’ s “IF In. ” 2. Connect cable from Receiv er’ s “Output to TV” to TV’ s “RF In. ” 3. Connect e xter nal TV antenna input cab le into VCR’s “In F rom Antenna.
3.5 Connecting to Second Receiver Note: These instructions apply to a Receiver with SCART ports. lf you need assistance in identifying your specific equipment configuration, contact your authorized dealer . Instructions: 1. Connect satellite input cable to Receiv er’ s “IF In.
3.6 Connecting DiSEqC Switch Box Instructions: 1. Connect up to f our satellite input cables to DiSEqC Switch Box inputs . 2. Connect DiSEqC Switch Bo x output cable to Receiver’ s “IF In. ” F or saf ety reasons, k eep equipment unplugged from power sources until all cables are properly connected.
3.7 Connecting to Digital Amplifier Note: These instructions apply to a Receiver with both SCART and S/PDIF ports. lf you need assistance in identifying your specific equipment configura- tion, contact your authorized dealer . Instructions: 1. Connect satellite input cable to Receiv er’ s “IF In.
4.1 Setting TV Channels Press the MENU button on y our remote control to view the Main Menu on the screen. It has six categories: TV Channel, Radio Channel, Installation, System, P arental Control and Game. See figure below . Scroll up and down b y using CH+/– .
Edit Channels Scroll CH+/– until you select <Edit Channels>, then press OK . While you are watching TV , you can view the Channel List (sho wn in the figure below). Y ou can also identify the satellite and transponder of the selected TV channel.
C. Move The Mov e command allows you to place a channel in a diff erent position on the channel list. After selecting this command, a small input box will appear on the screen. Input a number between 1 to the total number of the e xisting chan- nels by using numeric k eys on the remote control.
c. Press alphanumeric character key to rename channel. d. Press OK key to confirm it. Back space: Press VOL– to delete character one b y one. Cancel: Press AUDIO to delete all added characters. e. Press EXIT to retur n to the previous menu. Note: Pressing “1” switches between capitalization and lo wer case of the alphabet.
A. Movie a. Select the “Movie” icon by using VOL+/– , then press FAV . The sub-menu will appear as shown in the f ollowing figure. The operation to rename f avorite channels is the same as “rename channel” (see page 19). b . Select your f av or ite channel by using CH+/– , and press OK .
Sort By FT A Select <Sor t By FT A> by using CH+/– . Press OK to view the sub-menu as shown in the f ollowing figure. All the FT A channels are listed first, then the scramb led channels. Sort By Satellite Select <Sor t By Satellite> by using CH+/– .
4.2 Setting Radio Channels Select <Radio channel> by using CH+/– in <Main Men u>. The result will be the sub-menu as shown in the f ollowing figure. The operation f or radio channels is the same as TV channels. T o switch betw een TV and radio modes, press TV/RADIO on the remote control.
4.3 Installation Settings Select <Installation> in <Main Menu> b y using CH+/– , press OK , you will see the sub-menu as shown in the f ollowing figure. It has f our items: Satellite Search, T ransponder Search, Satellite Setting and T ransponder Setting.
D. 22kHz If you are using tw o antennas connected to a 22kHz tone s witch bo x, you can either supply 22kHz by setting “ON” or select antenna b y setting “OFF . ” If the LNB frequency is set to universal, the 22kHz will oper ate automatically .
2. Continuously Move Select <Continuously Mov e>. Then select the direction b y using VOL+/– . By pressing VOL+/– , the dish will mov e. The motor stops after releasing VOL+/– . 3. Step Size Y ou can set the step size from 1 to 10 f or mov e steps.
J. MultiSat Search With DiSEqC1.0, y ou can scan up to f our satellites that you ha ve selected. a. Select <MultiSat search> by using CH+/– . b . Select satellites b y using VOL+ to view the sub-menu as shown in the f ol- lowing figure . c. Select satellites by using CH+/– or PGUP/PGDW .
T ransponder Search Check the tr ansponder signal and search channels. Select <T ransponder Search> b y using CH+/– . Press OK to view the sub-menu as shown in the f ollowing figure. A. Sat name T o select <Sat name>, press VOL+. Select satellite by using CH+/– or PGUP/PGDW , then press OK to confirm it.
Satellite Setting This menu consists of two parts, the top lists the satellite name and the bottom lists f our command options (add, delete, rename and mo ve) to use on the satellite selected in the top list. T o scroll to the display ed satellite name, mo ve the scroll bar on the right edge of the box b y using CH+/– or PGUP/PGDW .
B. Delete This command allows y ou to delete one or more satellites from the satellite list. a. Select <Delete> by using VOL+/– . b . Select a satellite you w ant to delete by using CH+/– or PGUP/PGDW . c. Press OK to view the sub-menu as shown in the f ollowing figure.
D. Move The Mov e command allows you to place a satellite in a diff erent position on the satellite list. After selecting this command, a small input box will appear on the screen. Input a number between 1 and the total number of the e xisting satellites by using numeric k eys on the remote control.
T ransponder Setting Select <T ransponder Setting> b y using CH+/– . Press OK to view the sub- menu as shown in the f ollowing figure. A. Select satellite a. Select “Select satellite” icon b y using VOL+/– . b . Select a satellite you w ant b y using CH+/– or PGUP/PGDW .
C. Edit T ransponder The Edit command lets you change the par ameters of a transponder . Select the transponder item y ou want to edit from the list on the right side of the screen. a. Select “Edit T ransponder” icon b y using VOL+/– . b . Select a transponder y ou want to edit b y using CH+/– .
4.4 System Settings Select <System> in <Main Menu> b y using CH+/– . Press OK to view the sub- menu as shown in the f ollowing figure. It has six items: System, OSD (On- Screen Displa y), Time Adjust, Reset All, Reset Channels and About D VB.
D. RF System The RF system is set at NTSC M. E. TV System Select your TV type between P AL, NTSC and SECAM by using VOL+/– . F . TV Screen Format Select your TV aspect ratio of output video either 4:3 or 16:9 by using VOL+/– . On-Screen Display (OSD) Select <OSD> in <System> by using CH+/– .
T ime Adjust Select <Time Adjust> in <System> by using CH+/– . Press OK to view the sub-menu as shown in the f ollowing figure. A . Set T ur n On, T ur n Off and T ur n Channel ON or OFF by using CH+/– or VOL+/– . Note: “Time Displa y”: Set On and the current time will appear on the left top of the screen.
Reset Channels Select <Reset Channels>. Press OK to view the sub-menu as sho wn in the f ollowing figure . Select <Y es> by using VOL+/– .
4.5 Parental Control Settings Select <P arental Control> in the <Main Menu> by using CH+/– . Press OK , and you will be ask ed to enter your pass word. Input your pass word to view the sub-menu as shown in the f ollowing figure. Note: Def ault pass w ord is 0000.
4.6 Game Selections and Settings Select <Game> in the <Main Menu> b y using CH+/– . Press OK to view the sub-menu as shown in the f ollowing figure. It has 2 games: T etr is and Snake . T etris Select <T etr is> in <Game> by using CH+/–.
Press VOL+/– and CH+/– to make the snak e move up , down, left and right. If the snake mo ves through a yello w icon, it adds length. If it mo ves through a blue icon, the game is o ver .
5.4 TV/Radio While watching the channel, s witch between TV and radio modes by using TV/RADIO on the remote control. 5.5 SA T If y ou searched channels from more than one satellite and w ant to ha v e a channel list f or each satellite, press SA T ke y sev eral times.
5.7 Info While watching the channel, press INFO on the remote control. The channel name appears along with the satellite name. T wo dynamic bars reflecting sig- nal strength and signal quality of the current channel also appear .
Updating Software (Receiver to Receiver) Note: These instructions apply to primary and secondar y receivers with SCART ports. lf you need assistance in identifying your specific equipment configuration, contact your authorized dealer . a. Connect primar y and second receivers with RS232C cab le.
44 TROUBLESHOOTING T roubleshooting The display on t he front panel does not light up . Check that the main cable is plugged into the power soc ket. Main cable is not connected. PROBLEM WHA T TO DO POSSIBLE CAUSE No sound or picture. But the front panel red light is on.
TROUBLESHOOTING T roubleshooting 45 PROBLEM WHA T TO DO POSSIBLE CAUSE No picture appears on the TV screen. The system is con- nected using RF leads. The remote control is not working. Change the batteries. Batteries exhausted. Aim the remote control at the Receiver or chec k that nothing b loc ks the front panel.
Access A uthorization to use the coding system to purchase/order TV programs. AGC A utomatic Gain Control. A circuit that automatically adjusts signal lev els. Audio system With digital satellite reception, the sound is transmitted in pac kages and is selected either in a special audio mode or pre-selected by using the installation setup .
PCR Program Cloc k Reference . Timing inf or mation corresponding to a par ticular satellite channel on a digital frequency . The PCR must be entered when adding new channels . Polarization P olarization allows sev eral programs to be fit into the same frequency band.
Note: The specifications for your Receiver may differ from those described below , depending on where you purchased your Receiver . lf you need assistance in identifying your specific equipment specifications, contact your authorized dealer .
LNB CONTROL Power supply 13/18V (500mA max) polar ization with shor t circuit protection Polarized control 13/18V polar ization (ver tical/horizontal) DiSEqC contr ol DiSEqC 1.
50 MENU STRUCTURE Menu Structure Installation System Game TV(Radio)Channel TV(Radio) Channel 1. Edit Channels 2. Set F avorites 3. Sor t by FT A 4. Sor t by Satellite 5. Sor t by T ransponder 6. Sor t by F av orite 7. Sor t by Alphabet Edit Channel 1.
51 Notes.
355 P ar kside Drive San F ernando, Calif or nia 91340 Sales: 800-421-6511 Phone: 818-493-4300 F ax: 818-493-4433 www . picomacom .com sales@picomacom.
Ein wichtiger Punkt beim Kauf des Geräts Pico Macom SIRD-FTA (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pico Macom SIRD-FTA noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pico Macom SIRD-FTA - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pico Macom SIRD-FTA reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pico Macom SIRD-FTA erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pico Macom SIRD-FTA besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pico Macom SIRD-FTA verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pico Macom SIRD-FTA. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pico Macom SIRD-FTA gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
