Benutzeranleitung / Produktwartung 1104 des Produzenten Phonetics
Zur Seite of 108
SENSAPHONE ® Model 1104 User’ s Manual V ersion 1.1 1 SENSAPHONE, INC..
Every effort has been made to ensure that the information in this document is complete, accurate and up-to-date. SENSAPHONE, INC. assumes no responsibility for the results of er rors bey ond its control.
IMPOR T ANT SAFETY INSTR UCTIONS Y our Model 1104 has been carefully designed to gi ve you y ears of safe, reliable performance. As with all electrical equipment, ho we ver , there are a few basic pre.
1. The po wer cord or plug is fra yed or damaged. 2. Liquid has been spilled into the product or it has been e xposed to w ater . 3. The unit has been dropped , or the cabinet is damaged. 4. The unit doesn’ t function nor mally w hen you’ re follo wing the operating instr uctions.
FCC Requirements Pa r t 6 8 : The Sensaphone® Model 1104 complies with Par t 68 of the FCC rules. On the back of the unit there is a label that contains, among other information, the FCC Registration Number and the Ringer Equiv alence Number (REN) for this equipment.
Pa r t 1 5 : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to P ar t 15 of the FCC Rules. These limits a designed to pro vide reasonable protection against harmful interference in a residential installation.
Canadian Department of Communications Statement Notice : The Canadian Depar tment of Communications label identif ies certif ied equipment. This cer tif ication means that the equipment meets certain telecommunications network protecti ve operational and safety requirements.
Sensaphone ® Model 1104 User’ s Man ual viii.
IMPOR T ANT SAFETY INSTR UCTIONS . . . .iii Chapter 1: Introduction . . . . . . . . . . . . . . . .13 T echnical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Chapter 2: Installation . . . . . . . . . . . . . . . . .15 2.1 Operating En vironment .
Chapter 4: Comm unications Programming 33 4.1 The Unit ID Number . . . . . . . . . . . . . . . . . .33 4.1.1 Programming the ID Number . . . . . . . . . . . . . . .33 4.1.2 Interrogating the ID Number . . . . . . . . . . . . . . . .34 4.2 Dial-out T elephone Number s .
4.13 The Clock . . . . . . . . . . . . . . . . . . . . . . . . . .58 4.13.1 Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . .58 4.13.2 Interrogating f or the Current Time . . . . . . . . . . . .59 4.14 The Security Code . . . . . . . .
5.10.3 Prog ramming High Sound Alarm Recognition Time . . . . . . . . . . . . . . . . . . . . . . . .78 5.11 High Sound Alarm Enable/Disable . . . . . .79 5.11.1 Changing Enabled/Disab led High Sound Alar m . . . . 7 9 5.12 Exit Delay . . . . . . . . .
Chapter 1: Introduction The Sensaphone ® Model 1104 is a fully-pro g rammable, en vironmental monitoring system that offers extensi ve on-site and remote monitoring capability to small businesses, priv ate homes, far ms, greenhouses, computer rooms, and remote f acilities.
To ensure reliable operation, the Model 1104 features po w er backup capability; in the e vent of A C po w er failure, six D-cell batteries (not included) will continue to po wer the unit for approximatel y 24 hours. This manual comprises the instructions and commands for installing and operating the Model 1104.
Chapter 2: Installation Cor rectly installing the Model 1104 will ensure proper functioning of the unit. Please read the entire chapter before starting the installation process. W ithin the packaging will be a W arranty Registration Card. Please take the time to f ill this out and mail.
2.3 P ower Surge Pr otection The Model 1104 can be damaged b y po wer sur ges and lightning through the telephone line and the 120 V A C pow er supply .
2.5 Starting the Model 1104 When the A C po w er transfor mer is f irst plugged into the electrical outlet, the Model 1104 automatically starts in R UN mode. The red LED light will begin to glo w . The unit will respond with,“Hello, this is Sensaphone® 1104 .
2.7 T elephone Line The Model 1104 will operate with all standard telephone systems that accept pulse or tone dialing. The Model 1104 cannot be used on an extension line to dial its o wn telephone number . Also, it ma y not be installed on a party line or pay telephone line.
2.8 The Micr ophone The Model 1104 is pro vided with a built-in microphone which is used to monitor high sound lev els produced near the installation site. The sensitivity of the microphone is conf igurable and will detect a continuous as w ell as a beeping alarm.
of sensor connected to each alert input (refer to Chapter 5, Section 5.1). An input conf igured as “temperature” is designed to ev aluate a range of settings. The Model 1104 will read the temperature at the sensor’ s location and compare that value to pro g rammed high and lo w temperature limits.
Figure 2-7. T wo Sensors Wired to Adjacent Inputs NO TE Do not use sensors, switches, or rela ys that supply any v oltage or cur rent to the Model 1104. Be aw are of proximity to other electrical wires or components w hen placing wires that lead from the sensors to the unit.
Figure 2-8. Multiple Normally Closed Sensors To wire sev eral nor mally open sensors to one alert input, connect them in parallel. T o do this, take one lead from each sensor and attach it to the numbered terminal. Then, take the second lead from each sensor and attach each to the cor responding ground screw .
Figure 2-10. P otential Sensor Damage from Stra y Electrical Noise 2.13 Disconnecting the Model 1104 for Stora ge or Seasonal Use. If you plan to emplo y the Model 1104 as a seasonal “w atchdog” f.
NO TES Sensaphone ® Model 1104 User’ s Man ual 24.
Chapter 3: Quick Start This section presents a useful guide for f irst-time programming of the Model 1104. F ollo w instr uctions for installation before attempting to pro g ram the Model 1104. Refer to Chapter 2: Installation. 3.1 The Local K eypad Programming is accomplished using the local ke ypad (sho wn belo w , Figure 3-1).
3. Connect the Model 1104 to a telephone line. When these steps are completed , the Model 1104 is fully operational and able to monitor temperature, high sound , A C po wer failure and battery backup condition; it can also be called on the telephone for a Status Report or used for listening to on- site sounds from any remote location.
Press CONFIGURE. 6. The Model 1104 will audibl y recite the new conf iguration for each of the four inputs, responding with “OK, ” if it detects N. O. (normally open), “beep-OK, ” if it detects N .C (nor mall y closed) or “T emper atur e, ” if it detects temperature (regardless of whether all the inputs ha ve attached sensors or not).
Step 3: Set Dial-Out T elephone Numbers To program dial-out telephone numbers: 1. Press SET . 2. Press PHONE NUMBER. 3. Select which telephone number to pro g ram. Press any unassigned number ke y (from 1 to 4) to represent the new telephone number entry .
6. Repeat abo ve procedure to program up to four separate telephone numbers. Step 4: Set T emperature Limits High and lo w temperature limits can be separately pro g rammed for each input that is conf igured as temperature. Limits can range from –20° to +150° F ahrenheit, or from –30° to 65° Celsius.
5. Press ENTER. The Model 1104 responds: “Enter high temper ature limit. ” 6. Using the number ke ys, enter the value for high temperature limit. The Model 1104 will recite the digits as they are pressed. 7. Press ENTER. The Model 1104 responds: “Enter .
F or a complete explanation of each feature (with illustrations of ke ystrokes), refer to Chapter 4: Communications Pro g ramming and Chapter 5: Alar m Pro g ramming. To gain a basic understanding of ho w the alar m dial-out feature w orks, refer to this chapter, Section 3-4.
Sensaphone ® Model 1104 User’ s Man ual 32 Action—Response 1. THE MODEL 1104 DETECTS AN ALER T CONDITION An alert condition is not the same as a valid alarm—the condition must continue for the programmed time period , or Recognition T ime , before it is reco gnized as a valid alarm.
Chapter 4: Comm unications Programming This chapter explains the ke ypad commands for communications programming of the Model 1104, including inter rogation and resetting of the follo wing: • The Unit ID Number • Dial-out T elephone Numbers • T one or Pulse Dialing • Special Dialing with Pagers, Beepers and Access Numbers.
2. Press ID NUMBER. 3. Using the number keys, enter up to 16 digits for the ID number . The Model 1104 will recite the digits as they are pressed. 4. Press ENTER. The Model 1104 will respond: “Enter . ” 4.1.2 Interrogating the ID Number To inter rogate the ID numbers: 1.
4.2 Dial-out T elephone Number s The Model 1104 can store up to four 32-digit phone numbers. These are the numbers that will be called during dial-out.
6. Repeat abo ve procedure to pro g ram up to four separate telephone numbers. 4.2.2 Interrogating a Dial-out T elephone Number To inter rogate dial-out telephone numbers: 1. Press WHA T IS. 2. Press PHONE NUMBER. 3. Press a number key (from 1 to 4). Model 1104 will recite the cor responding telephone number .
4. Press ENTER. The Model 1104 will sa y “Enter . ” ENTER TONE PM ENTER TONE PM 1 CALL DELAY 2 VOICE REPS 3 INTERCALL TIME 4 MAX CALLS Chapter 4: Communications Pr ogramming 37.
4.3 T one or Pulse Dialing The Model 1104 can dial out in pulse or T ouch T one™. Select the type of dialing, in either pulse or tone, depending upon the type of service provided b y your telephone compan y . The default is tone. To program for either pulse or tone: 1.
When inter rogating telephone numbers, P A USE is audibl y represented by a “beep. ” 2. P ound (#) A pound ma y be required when calling some phone or beeper systems. When inter rogating telephone numbers, pound (#) is audibl y represented by the w ord “twelve.
3. Press any unassigned number ke y (from 1 to 4) to represent the new telephone number entry . Model 1104 will respond: “Enter number . ” 4. From the number ke ys, enter the access digit (i.e., 9). The Model 1104 will recite the digit. 5. Press P A USE.
1. Press SET . 2. Press PHONE NUMBER. 3. Press any unassigned number ke y (from 1 to 4) to represent the new telephone number entry . Model 1104 will respond: “Enter number . ” 4. Enter the telephone number using the number keys. The Model 1104 will recite the digits as they are pressed.
4.4.4 Special Dialing to a Beeper or P ager The follo wing example demonstrates just one solution to programming the Model 1104 for dialing to a beeper or pager . Many other k ey sequences will also w ork. Star t with steps 1–3 belo w; next, enter special dialing keys w here required for your beeper or pager service.
6. Now press P A USE once to activ ate a four second delay . This assumes the call is answ ered by a beeper/pager service that immediately deli vers a prerecorded voice message. P A USE ma y be pressed more than once to program more time for the beeper/pager service to f inish its message.
4.5 Rings Until Answer Rings Until Answ er is the programmed number of times the telephone rings before the Model 1104 will answ er an incoming call. This can be set from 1 to 15 rings. The default value is 4. 4.5.1 Programming Rings Until Ans wer To program Rings Until Answ er: 1.
4.6 T AD (T elephone Ans wering Device) The T AD feature is especiall y useful because it integ rates the operation of the Model 1104 with your telephone ans wering device in a w ay that retains the full fle xibility of each system.
Example: T elephone answ ering device, rings = 4 Model 1104, Rings Until Answ er = 6 Using the procedure just outlined , all incoming calls will be answ ered by the telephone ans w ering device, allo wing it to operate normally .
4.7 Listen-in Time The Listen-in Time is the amount of time y ou can listen to sounds from the Model 1104’ s built-in microphone at its installation site.
4.7.2 Interrogating the Listen-in Time To inter rogate the Listen-in T ime: 1. Press WHA T IS. 2. Press LISTEN TIME. The Model 1104 will recite the listen time in seconds programmed.
4.8 Call Delay Call Dela y is the programmed length of time the Model 1104 w aits, follo wing detection of an alar m, before it begins the dial- out sequence. This applies only to the f irst call. (Delay time betw een calls is also programmable: refer to Intercall T ime, Section 4-11.
5. Using the number keys, enter the seconds. The Model 1104 recites the digits as you press them. 6. Press ENTER. The Model 1104 responds: “Enter . ” 4.8.2 Interrogating Call Dela y To inter rogate Call Dela y: 1. Press WHA T IS. 2. Press CALL DELA Y .
4.9 Local V oice Mute When the Model 1104 dials out to report an alar m, it also audibl y recites the alarm message at its installation site. The Local V oice Mute command allo ws you to turn off the voice at the Model 1104’ s site during alar m dialouts and status call-ins.
4.10 V oice Repetitions The V oice Repetitions feature allo ws programming of the number of times the alarm message is delivered per phone call during alarm dial-out. The maximum repetitions ma y be set to 10; the default is 3 repetitions. 4.10.1 Programming V oice Repetitions To program V oice Repetitions: 1.
2. Press V OICE REPS. The Model 1104 will recite the number programmed. 2 VOICE REPS Chapter 4: Communications Pr ogramming 53.
4.11 Intercall Time The Intercall Time is the pro g rammable period of time the Model 1104 waits in calling subsequent telephone numbers. Intercall Ti m e is activ ated only after alarm dial-out to the f irst telephone n umber fails to be ackno wledged .
The Model 1104 recites the digits as you press them. 4. Press ENTER. The Model 1104 will respond: “Enter seconds. ” 5. Using the number keys, enter the seconds. The Model 1104 recites the digits as you press them. 6. Press ENTER. The Model 1104 responds: “Enter .
4.12 Maximum Number of Calls (Max Calls) The Max Calls feature controls the total number of repeated calling attempts by the Model 1104 in the e vent of an alarm. When an alarm occurs, the dial-out process begins, and continues to cycle through y our programmed telephone numbers until a maximum number of calls is reached.
4. Press ENTER. The Model 1104 responds: “Enter . ” 4.12.2 Interrogating Max Calls To inter rogate Max Calls pro g rammed: 1. Press WHA T IS. 2. Press MAX CALLS.
4.13 The Cloc k The Model 1104 has a built-in clock. The po wer -up time is 12 AM . The clock will keep time from 12 AM until y ou program the cur rent time. It will then keep time from your pro g rammed time. If the A C po w er fails, the clock will continue to keep time until the battery back-up f ails.
Example: Y ou want to set the clock to 12:45 AM . Press the follo wing keys in the order sho wn: SET…CLOCK…1…2…4…5…AM…ENTER. 4.13.2 Interrogating f or the Current Time To inter rogate the Model 1104 for the current time: 1. Press WHA T IS.
4.14 The Security Code The Security Code is the last step after setting all other programming parameters for the Model 1104. The code consists of a 4-digit number you select and will ef fectivel y prevent unauthorized changes to the Model 1104’ s programming.
3. Using the number keys, enter the digits for the code. If the cor rect code is entered , the Model 1104 will sa y “OK. ” If the wrong code is entered , the Model 1104 will sa y “Err or 2.
Sensaphone ® Model 1104 User’ s Man ual 62.
Chapter 5: Alarm Pr ogramming This chapter explains the alarm programming and monitoring capabilities of the Model 1104, with specif ic instructions for the follo wing features: • Conf igure inputs .
F or example, if a magnetic reed switch (a normall y- closed sensor used to detect unauthorized entry) has been wired to the Model 1104, make sure that the door or windo w to be monitored is shut before con- f iguring the input.
5.1.2 V erifying Input Configuration Input conf iguration can be verif ied when inter rogating the Model 1104 for a complete Status Report. Refer to Chapter 6 for a more detailed description of the Status Report. 5.2 Enable/Disable Inputs This function allo ws you to enable or disab le an input’ s response to an alert condition.
The Model 1104 audibl y recites the cur rent status of every input. In a Status Report, each input is f irst identif ied by its input number , follow ed by a report that specif ies parameters cur rently affecting that input. If an input is disabled, the word “Off ” immediately follo ws the number r ecited for that input.
programmed. The Model 1104 responds: “Enter minutes. ” 4. Using the number keys, enter the minutes. F or e xample, to set a Recognition T ime of f ive minutes, simpl y press “5” on the ke ypad. The Model 1104 recites the digits as they are pressed.
3. Press the cor responding input key (1 to 4). The Model 1104 recites the programmed Reco gnition Time for that input. 1 CALL DELAY 2 VOICE REPS 3 INTERCALL TIME 4 MAX CALLS Sensaphone ® Model 1104 .
5.4 Establishing High and Lo w T emperature Limits High and lo w temperature limits can be separately pro g rammed for each input conf igured as temperature. Limits can range from –20° to +150° F ahrenheit, or from –30° to 65° Celsius. When temperature limits exceed high or lo w settings, the Model 1104 will dial out with an alarm message.
7. Press ENTER. The Model 1104 responds: “Enter . ” NO TE Do not set temperature limits too close to normal room temperature. Minor temperature fluctuations could result in frequent and unnecessary alar m dialouts.
3. Press the number key corresponding to the selected temperature input. 5.5 T emperature Scale T emperature inputs may be set in either F ahrenheit or Celsius degrees. The def ault temperature scale is F ahrenheit. T o change to Celsius: 1. Press SENSOR ON/OFF .
5.6.1 Programming T emperature Calibration 1. Press SET . 2. Press CALIBRA TE. 3. Press the number (1 to 4) of the selected temperature input to be calibrated. 4. Enter the number required to offset the current temperature reading so a cor rect reading is obtained.
3. Press the number key corresponding to the selected temperature input. If a “beep” precedes the number as it is recited , then a negati ve offset is indicated. 5.7 Obtaining Current T emperature Cur rent temperature readings for each temperature input ma y be accessed at any time.
5.8 A C P ower Monitoring Enable/Disab le The Model 1104 monitors A C po w er failure. This command enables or disab les the pow er failure detection feature.When enabled , the Model 1104 will monitor po w er and dial out when AC po wer failure e xceeds a programmable span of time (refer to AC Pow er F ailure Recognition Time, Section 5.
po wer failure alarm may also be cancelled remotel y , by telephone ackno wledgment (see Chapter 6, Section 6.1). 5.9.1 Programming P ower F ailure Recognition Time 1. Press SET . 2. Press RECOGNITION TIME. 3. Press PO WER. The Model 1104 responds: “Enter minutes.
5.9.2 Interrogating P ower F ailure Recognition Time 1. Press WHA T IS. 2. Press RECOGNITION TIME. 3. Press PO WER. The Model 1104 will recite the po wer Reco gnition Time.
5.10 Sound Alarm Monitoring This feature allo ws you to program the le vel and duration of sound that will cause the Model 1104 to respond to an alarm and dial-out.
5.10.2 Interrogating Sound Sensitivity 1. Press WHA T IS. 2. Press CALIBRA TE. 3. Press SOUND . The Model 1104 recites the programmed sound sensitivity le vel. 5.10.3 Pr ogramming High Sound Alarm Recognition Time The Recognition T ime for sound alar m monitoring ranges from 2 seconds to 59 seconds.
5.11 High Sound Alarm Enable/Disable The Model 1104 monitors sound through the built-in microphone. When the sound lev el suddenly exceeds the pro g rammed high sound limit, the Model 1104 will respond to an alert condition. The increased sound lev el must continue throughout the programmed reco gnition time.
5.12 Exit Delay When tripping an alarm is unav oidable, y et a true aler t condition has not actually occurred , the alar m response, including dial-out, can be temporarily suppressed. The Model 1104 is able to suppress and then reset its dial-out function automatically through use of the Status Report.
Chapter 6: Ac knowledgment, Status Repor t & Remote Access In addition to communication and alarm monitoring capabilities, the Model 1104 will also respond to your instructions and pro vide y ou with access to information on monitored conditions at all times.
•T o enter “555, ” press the number (5) k ey on the T ouch-T one ™ phone keypad three times. The Model 1104 will respond: * “W arning messag e received b y telephone number (last n umber dialed). ” The Model 1104 will hang up and the dial- out sequence, including any further response to the alarm, will be cancelled.
6.2 Status Report The Status Report allows access to complete information on all monitored conditions either locally , from the keypad , or b y telephone, from any location. The Model 1104 will ans w er an incoming telephone call follo wing the programmed Rings Until Answ er (refer to Chapter 4, Section 4.
“Battery condition, OK. ” Other possible responses: “Battery condition low” or “Replace batteries. ” (Refer to Section 6.2.4 for additional information regarding batter y condition.) “Sound level, OK. ” “Listen to the sound level f or 10 seconds.
* The “last telephone number dialed” refers to any one of the programmed , dial-out telephone numbers through which the Model 1104 w as able to receiv e alarm acknowledgment, prior to y our call for a Status Report; this could also refer to the Model 1104’ s I.
Depending upon the remaining voltage, it ma y respond: • “Battery Condition OK, ” if o ver 8.2 V olts. • “Battery Condition low , ” if betw een 7.
appropriate input (thereby disab ling any alarm dial-out response). The input remains disabled until y ou issue the same command , w hich ef fectivel y retur ns it to its for mer , enabled state. Press the follo wing push-buttons on the T ouch-T one ™ telephone to ex ecute the desired command: * (asterisk), 1 .
Sensaphone ® Model 1104 User’ s Man ual 88.
Chapter 7: Operation After installation and programming is completed , the Model 1104 is fully operational. This chapter e xplains the sequence of ev ents that occur during an alarm dialout to illustrate how the Model 1104 operates.
Input T ype: (1) An open cir cuit closes, (2) a closed cir cuit opens, or (3) temper ature limits ar e exceeded. Recognition T ime: Activated Recognition T ime: Expir ed V alid Alarm: Exists Call Delay: Activated Alarm Messag e: Au dible, On-site Activated Local V oice Mute: Disab led Sensaphone ® Model 1104 User’ s Man ual 90 I.
Call Delay: Expir ed Inter call T ime: Activated V oice Repetitions: Activated Call Pr ogr ess: Activated Max Calls: Activated Alarm Messag es: By T elephone and On site Chapter 7: Operation 91 III.
Sensaphone ® Model 1104 User’ s Man ual 92 Local, On-site Ackno wledgment T ouch-T one Ackno wledgment: F ast Code 555 T ouch-T one Ackno wledgment: Normal Code 555 T one or Pulse Callback Ackno wledgment: W ithin Inter call T ime IV .
answ ering device is connected to the same line as the Model 1104 (and T AD is enabled), the Model 1104 will ans wer on the f irst ring. First, it recites the Status Report, follow ed by: “W arning messa ge r eceived by telephone numbe r ...(the last number it dialed) .
Sensaphone ® Model 1104 User’ s Man ual 94 7.2 Example: A Dial-out T elephone Call The follo wing parameters are selected for demonstration pur poses: • Model 1104 Unit ID Number is set to 555-5674. It is cur rently installed at y our place of b usiness.
Appendix A: T r oubleshooting In the ev ent that a problem is encountered , this section will assist y ou in determining the cause, so you can return the unit to its usual monitoring routine with minimal inter ruption.
Sensaphone ® Model 1104 User’ s Man ual 96 Prob lem Cause Solution 1. The Model 1104 f ails to dial out. a) The telephone number ma y be incor rectly programmed. b) T one or pulse (the current dialing method) is not compatible with the telephone line on which the Model 1104 is installed.
Appendix A: T roub leshooting 97 2. The Model 1104 will not answ er the telephone when called for a Status Report or alarm acknowledgment. e) The Model 1104 is connected to an imcompatible telephone line. a) Rings Until Answ er is incor rectly pro- g rammed.
Sensaphone ® Model 1104 User’ s Man ual 98 Prob lem Cause Solution (Continued from previous page) 3. The Model 1104 will not answ er the telephone for Callback Ackno wledgement. 4. The Model 1104 recites the alarm message or Status Report ov er the telephone, but is silent at the installation site.
Appendix A: T roub leshooting 99 Prob lem Cause Solution 1. Can’t pro g ram temperature limits; or the unit w on’ t read the temperature sensor . 2. The temperature reading is -20° F or -30° C. 3. T emperature reads 150° F or 65° C. 4. T emperature reading is inaccurate.
Sensaphone ® Model 1104 User’ s Man ual 100 Prob lem Cause Solution 1. F alse high sound alar ms occur frequently . 2. High sound does not cause an alar m. The programmed sound sensiti vity results in ov er-sensiti vity to non-alar m sound as well as alarm sound.
Appendix A: T roub leshooting 101 3. The Model 1104 does not recognize po w er failure. 4. The Model 1104 does not recognize any alarm. a) Batteries are either incor rectly installed or drained. b) Reco gnition time setting is too long. a) Inputs for alarm are disabled.
Sensaphone ® Model 1104 User’ s Man ual 102 Prob lem Cause Solution (continued from previous page) 5. The batteries drain prematurely . The unit’ s A C transfor mer is unplugged or for some other reason, full AC po wer is not a vail- able to the unit.
Appendix B: W eekly T esting Pr ocedure We recommend that y ou test your Sensaphone w eekly to be sure it is functioning properly . This will ensure that when a problem arises the Sensaphone will be ready to alert the appropriate personnel. There are se veral tests that can be performed: 1) Call the unit and listen to the Status Report.
4) If you are using y our Sensaphone to listen for a smoke alarm, then be sure to test the smoke alarm to make sure that the Sensaphone picks up the audible signal and triggers a high- sound-le vel alarm. Allo w the unit to dial all programmed telephone numbers.
Appendix C: Accessories The sensors listed belo w are av ailable from Sensaphone, Inc., and represent the most commonly used input de vices. Other dr y contact sensors, designed for more specialized applications, ma y also be used. Commercial or industrial electrical supply houses can pro vide devices to monitor virtually an y condition.
Sensaphone ® Model 1104 User’ s Man ual 106.
Appendix D: Returning the Unit f or Repair In the ev ent that the Model 1104 does not function properly , w e suggest that you do the follo wing: 1) Record your observations re garding the Model 1104’ s malfunction. 2) Call the T echnical Service Department at (610)558-2700 prior to sending the unit to Sensaphone for repair .
108 1 YEAR LIMITED W ARRANTY 1. W ARRANT OR : Dealer , Distributor , Manufacturer 2. ELEMENTS OF W ARRANTY : This Product is warranted to be free from def ects in materials and craftsmanship with only the limitations and exclu- sions set out below . 3.
Ein wichtiger Punkt beim Kauf des Geräts Phonetics 1104 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Phonetics 1104 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Phonetics 1104 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Phonetics 1104 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Phonetics 1104 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Phonetics 1104 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Phonetics 1104 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Phonetics 1104. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Phonetics 1104 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
