Benutzeranleitung / Produktwartung A02-IPCAM-W54 des Produzenten Atlantis Land
Zur Seite of 77
Where solutions begin Company certified ISO 9001:2000 NetCamera IP Security Wireless Camera A02-IPCAM-W54 User Manual A02-IPCAM-W54_ME01.
.
IP Wireless Security Camera.
.
IP Wireless Security Camera Copyright The Atlantis Land logo is a r egistered trademark of Atlantis Land SpA. All other names mentioned mat be trademarks or regi stered trademarks of their res pective owners. Subject to change without notice. No liability for technical errors and/or omissions.
IP Wireless Security Camera A02-IPCAM-W54_ME01 1 TABLE OF CONTENTS CHAPTER 1 ...................................................................................................................................................................... 5 1.1 I NTROD UCTION .
IP Wireless Security Camera A02-IPCAM-W54_ME01 2 CHAPTER 10 ................................................................................................................................................................. 16 10.1 I NSTALLATION .......
IP Wireless Security Camera A02-IPCAM-W54_ME01 3.
IP Wireless Security Camera A02-IPCAM-W54_ME01 4.
IP Wireless Security Camera A02-IPCAM-W54_ME01 5 Chapter 1 Introduction 1.1 Introduction Thank you for purchasing the IP Security Wireless Camera, a camera device that can be connected directly to an Ethernet or Fast Ethernet network and also supported by the wireless transmission based on the IEEE 802.
IP Wireless Security Camera A02-IPCAM-W54_ME01 6 Chapter 2 System Requirement 2.1 Network: Local Area Network: 10Base-T Ethernet or 100Base TX Fast Ethernet Wireless Local Area Network: IEEE 802.11b/g Wireless LAN Recommended PC or Notebook to Access the IP Security Wireless Camera 2.
IP Wireless Security Camera A02-IPCAM-W54_ME01 7 Chapter 3 Features and Benefits This section describes the features and benefits of the IP Security Wirele ss Camera. 3.1 Simple To Use The IP Security Wireless Camera is a standalone system with built-in CPU requiring no special hardware or software such as PC frame grabber cards.
IP Wireless Security Camera A02-IPCAM-W54_ME01 8 industrial and public monitoring. The IP Security Wireless Camera can also be used for intruder detection; in addition, it can capture still images for archiving and many more applications.
IP Wireless Security Camera A02-IPCAM-W54_ME01 9 Chapter 4 Physical Description This section describes the externally visible features of the IP Security Wireless Camera. 4.1 Front Panel Power LED The Power LED is positioned on the right side of the IP Security Wireless Camera’s lens while facing the IP Security Wireless Camera.
IP Wireless Security Camera A02-IPCAM-W54_ME01 10 Link LED The Link LED is positioned on the right side of t he IP Security Wireless Camera’s lens while facing the IP Security Wireless Camera. It is located right of the Power LED A steady orange light confirms that the camera has good connection to LAN connectivity.
IP Wireless Security Camera A02-IPCAM-W54_ME01 11 DC Power Connector The DC power input connector is located on the IP Security Wireless Camera’s rear panel, and is labeled DC 5V with a single jack socket to supply power to the IP Security Wireless Camera.
IP Wireless Security Camera A02-IPCAM-W54_ME01 12 Screw Hole Located on the top panel of the IP Security Wireless Camera, the screw hole is used to conne ct the camera stand onto the IP Security Wireless Camera by attaching the screw head on the camera stand into the screw hole of the IP Security Wireless Camera.
IP Wireless Security Camera A02-IPCAM-W54_ME01 13 Chapter 5 Unpacking The IP Security Wireless Camera Carefully remove all items from the package. In addition to this User’s Guide, be certain that y.
IP Wireless Security Camera A02-IPCAM-W54_ME01 14 Chapter 6 Hardware Installation This section describes the Hardware installation procedure f or the IP Security Wireless Camera.
IP Wireless Security Camera A02-IPCAM-W54_ME01 15 6.3 Attach the external power supply Attach the external power supply to the DC power input connector located on Wireless IP Security Wireless Camera’s rear panel, and then connect it to your local power supply.
IP Wireless Security Camera A02-IPCAM-W54_ME01 16 Chapter 7 Security To ensure the highest security and prevent unauthorized usage of the IP Security Wireless Camera the Administrator has the exclusiv.
IP Wireless Security Camera A02-IPCAM-W54_ME01 17 Chapter 8 Software Installation This section describes the Software installation procedure of the IP Security Wire less Camera for Web Configuration and IPView SE application. 8.1 Web Configuration The IP Security Wireless Camera must be configured through its built-in Web-based Configuration.
IP Wireless Security Camera A02-IPCAM-W54_ME01 18 8.2 Main Menu Image After the default IP address is entered from the browser, the IP Security Wireless Camera Welcome screen will appear with a still image.
IP Wireless Security Camera A02-IPCAM-W54_ME01 19 8.3 System Administration Click “System Administration” from the Welcome screen to access the settings required for the IP Security Wireless Camera.
IP Wireless Security Camera A02-IPCAM-W54_ME01 20 System Click the System item in the left column to display the device status of your camera. Device Status: The information about the camera, including the Camera Name, Location, Model, Firmware Version, MAC Address and IP Address, can be found in this field.
IP Wireless Security Camera A02-IPCAM-W54_ME01 21 Wireless Click the Wireless item in the left column to display the information of the wireless LAN. Wireless Status: The items in this field display t.
IP Wireless Security Camera A02-IPCAM-W54_ME01 22 User Click the User item in the left column to display the user(s) information. Active Users: The items in this field display the user(s) infor mation, including the user(s) IP address, Name, and DateTime.
IP Wireless Security Camera A02-IPCAM-W54_ME01 1 8.3.2 Configuration The Configuration window contains commands for settings that are required to input key details to setup the camera for operation.
IP Wireless Security Camera A02-IPCAM-W54_ME01 2 and Admin Password as soon as possible to enable security option f or the Wireless Internet Camera to function. • LED Control: This option allows user to setup the LED illumination as desired. This feature provides the flexibility when surveillance activi ty is ON.
IP Wireless Security Camera A02-IPCAM-W54_ME01 3 Wireless Click the Wireless item in the left column to setup the wireless LAN configuration of your camera. -Wireless Interface • Connection Mode: Use this option to determine the type of wireless communication for your camera.
IP Wireless Security Camera A02-IPCAM-W54_ME01 4 sure to set the SSID of the camera to correspond with the access point’s SSID for communication. Type any string up to 32 characters long (spaces, symbols, and punctuation are not allowed) in the Network Name box.
IP Wireless Security Camera A02-IPCAM-W54_ME01 5 Network Click the Network item in the left column to setup the LAN configuration of your camera. -TCP/IP: The items in this field display the information of the wireless LAN, such as the Connection Mode (Infrastructure or Ad-Hoc), Link, SSID, Channel, Transmission Rate, and WEP Encryptio n.
IP Wireless Security Camera A02-IPCAM-W54_ME01 6 appliances, wireless devices, and PCs of all form factors. Check the Enable option to enable the function of your camera. User Click the User item in the left column to add, edit and delete users for your camera.
IP Wireless Security Camera A02-IPCAM-W54_ME01 7 pull-down menu. • Set Manually: Select this option to set the time manually. The system administrator must enter the date and time in the respective field manually. Upload Click the Upload item in the left column to setup configuration for FTP server, time schedule and manual operation.
IP Wireless Security Camera A02-IPCAM-W54_ME01 8 name. • File: Since you may not upload only one image to the FTP server, you can choose the filing rule, including Overwrite , Date/Time Suffix , and set up the Sequence Number . -Manual Operation: When you click the Upload Video button in view video screen, it will start to upload the image.
IP Wireless Security Camera A02-IPCAM-W54_ME01 9 8.3.3 Tools The Tools window contains commands for restarting the camera. Click Tools in the top menu bar and the Tools window will E-mail Test Click the E-mail Test item in the left column to test your e-mail account.
IP Wireless Security Camera A02-IPCAM-W54_ME01 10 Factory Reset Do you really want to factory reset this device ? Click the YES button from this option, and you can resume all factory default settings for the camera. If you do not want to restore the factory settings, exit this window without clicking YES .
IP Wireless Security Camera A02-IPCAM-W54_ME01 11 8.3.4 Help The Help window provides the basic information of the camera. Click Help in the top menu bar and the Help window will appear as below: About Displays the camera’s model name and version.
IP Wireless Security Camera A02-IPCAM-W54_ME01 12 8.4 View Image – ActiveX Mode To view video images from the browser, click “View Image – ActiveX Mode” from the welcome screen to access the v.
IP Wireless Security Camera A02-IPCAM-W54_ME01 13 8.5 View Image – Java Mode Click “View Image – Java Mode” from the Welcome screen to a ccess the video images from the Internet Explorer or Ne.
IP Wireless Security Camera A02-IPCAM-W54_ME01 14 Chapter 9 IP Security Wireless Camera Application The IP Security Wireless Camera can be applied in wide variety of applications. With the built-in CPU, it can work as a standalone system that provides a web-based so lution transmitting high quality video images and sounds for monitoring purposes.
IP Wireless Security Camera A02-IPCAM-W54_ME01 15 SOHO Internet Camera SOHO Wireless Internet Camera SOHO 9.2 IP Security Wireless Camera Application Diagrams 9.
IP Wireless Security Camera A02-IPCAM-W54_ME01 16 Chapter 10 IPView SE Application 10.1 Installation Insert the CD-ROM into the CD-ROM drive to initiate the auto-run prog ram.
IP Wireless Security Camera A02-IPCAM-W54_ME01 17 The Welcome screen will appear as below. Click the “Next” button. The License Agreement window will appear as below.
IP Wireless Security Camera A02-IPCAM-W54_ME01 18 The following window allows you to select the folder where the IPView SE applicat ion will be located, click “Next” to continue.
IP Wireless Security Camera A02-IPCAM-W54_ME01 19 Chapter 11 Getting Started This section describes the operatio n of the IPView SE application with detailed procedures for using the application. 11.1 IPView SE IPView SE is responsible for the management of preview, configuration, and searching of each camera.
IP Wireless Security Camera A02-IPCAM-W54_ME01 20 11.1.2.How to Add a Camera Add Camera To add a new camera, click the Add Camera button. An Add Camera dialog box will appear as illustrated below. You must select the camera and click the “Add” button to add a new camera.
IP Wireless Security Camera A02-IPCAM-W54_ME01 21 If you are unsure of the IP Address of th e camera, you can click the “Browse” button, the Browse Camera dialog box will appear with a blank screen as illustrated below. You must select the camera and click the “Add” button to add a new camera.
IP Wireless Security Camera A02-IPCAM-W54_ME01 22 When the user add the IP Security Wireless Camera, four icons will appear, including: “Assign IP to Camera”, “Connect/Disconnect”, “Erase”.
IP Wireless Security Camera A02-IPCAM-W54_ME01 23 11.1.3.How to Change Camera Assign IP of New Camera To change camera, click the “ Assign IP of Camera” button. An Assign IP of Camera dialog box will appear as illustrated below. You must select the camera and click the “Add” button to add a new camera.
IP Wireless Security Camera A02-IPCAM-W54_ME01 24 11.1.4 How to Connect / Disconnect the Image Connect the Image Click the “ Connect/Disconnect ” button and the preview screen will app ear with the video image. When a new camera is added, it IS connected.
IP Wireless Security Camera A02-IPCAM-W54_ME01 25 Snapshot Click to snapshot a picture from the IP Security Wireless Camera. Rotate image Click to rotate the image of the IP Security Wireless Camera.
IP Wireless Security Camera A02-IPCAM-W54_ME01 26 Disconnect the Image Click the “ Connect / Disconnect ” button, the camera will be disconnect ed.
IP Wireless Security Camera A02-IPCAM-W54_ME01 27 11.1.5 How to Delete a Camera Erase Camera To delete a camera, you must select the camera to delete from the IPView SE control panel. T hen, click the “ Erase Camera ” button. After deleting the camera, the IPView SE control panel will appear as below.
IP Wireless Security Camera A02-IPCAM-W54_ME01 28 11.1.6 Extra Information Extra Information The screen displays the camera’s information..
IP Wireless Security Camera A02-IPCAM-W54_ME01 29 11.1.7 How to Adjust the Property Setting System Configure From the control panel, select the button and the dialog box will appear as shown b elow. Log Storage: 1. Single HDD Reserve Space This option permits reserved HDD space from 500 MB to 1000 MB.
IP Wireless Security Camera A02-IPCAM-W54_ME01 30 Camera Configure Click the “Camera Config” button and it will active t he Camera Setting, Motion Setting and Update Firmware buttons. Camera Setting Please refer to the “ Web Configuration ” section.
IP Wireless Security Camera A02-IPCAM-W54_ME01 31 Motion Setting You can adjust the sensitivity level and choose the Invoke Alarm options to work with motion detection function. Besides the Alarm Beep, Send Email can be enabled when motion detected. The user can define the time interval to Send E-mail.
IP Wireless Security Camera A02-IPCAM-W54_ME01 32 Update Firmware Enter the File Path and click the “Update” button, the firmware will be updated automatically. If you are unsure of the File path, you can click the “Browse” button, the Browse dialog box will appear as illustrated below.
IP Wireless Security Camera A02-IPCAM-W54_ME01 33 Chapter 12 Setup Wizard 12.1 Wizard Setup The Setup Wizard is a convenient tool that will guide you t hrough the installation of your camera easily and quickly. After connecting the camera to your computer, you can install th e Setup Wizard and complete the configuration now.
IP Wireless Security Camera A02-IPCAM-W54_ME01 34 Once executed, you will be asked to select the desired language. Select the language you want and click “OK” to continue. The Welcome screen will appear as below. Click the “Next” button. The License Agreement window will appear as below.
IP Wireless Security Camera A02-IPCAM-W54_ME01 35 After successfully installing theWizard, the application progr am for the IP Security Wireless Camera is automatically installed to ProgramsFiles directory. 12.2 How to use Wizard Setup To run the Setup Wizard, click Start -> Programs -> Setup Wizard .
IP Wireless Security Camera A02-IPCAM-W54_ME01 36 Click About to show the general information of the selected camera. Click Exit to close the Setup Wizard. Changing the Admin ID and Password By default settings, the Admin ID and Password are blank. For security purpose, you are recommended to change the Admin ID and Password immediately.
IP Wireless Security Camera A02-IPCAM-W54_ME01 37 The Connection Mode depends on how your camera is connected to your network. Click Infrastructure for use with a router or Adhoc for peer-to- peer. The Network Name , Wireless Channel , and Encryption Key MUST correspond with your wireless network settings.
IP Wireless Security Camera A02-IPCAM-W54_ME01 38 Software Information Click About to show the general information of the selected camera. Click OK to return to the main window.
IP Wireless Security Camera A02-IPCAM-W54_ME01 39 Appendix A Frequently Asked Questions Question Answer What is an IP Security Wireless Camera? The IP Security Wireless Camera is a standalone system connecting directly to an Ethernet or Fast Eth ernet network and supported by the wireless transmission based on th e IEEE 802.
IP Wireless Security Camera A02-IPCAM-W54_ME01 40 Question Answer What is the wireless transmission range for the IP Security Wireless Camera? Generally the wireless distance can go up to 100 meters indoors and up to 300 meters outdoors.
IP Wireless Security Camera A02-IPCAM-W54_ME01 41 Appendix B Trouble Shooting Question Answer I cannot access the IP Security Wireless Camera from a web browser. The possible cause might be the IP Address for the IP Security Wireless Camera is already being use d by another device.
IP Wireless Security Camera A02-IPCAM-W54_ME01 42 I cannot access the IP Security Wireless Camera from a web browser. Other possible problems might be due to the network cable. Try replacing your network cable. Test the network interface of the product by connecting a local computer to the unit, utilizing a standard Crossover (hub to hub) Cable.
IP Wireless Security Camera A02-IPCAM-W54_ME01 43 Question Answer Why does a series of broad vertical white line appears through out the image? A likely issue is that the CMOS sensor becomes overloaded when the light source is too bright such as direct exposure to sunlight or halogen light.
IP Wireless Security Camera A02-IPCAM-W54_ME01 44 Question Answer Noisy images occur how can I solve the problem? • The video images might be noisy if the IP Security Wireless Camera is used is a very low light environment. To solve this issue you need more lighting.
IP Wireless Security Camera A02-IPCAM-W54_ME01 45 Appendix C Xplug Control Installation Installation To Web Server It is highly recommended to install the Xplug Control application to the Web Server for IE 5.0. It must be installed to a Public Domain with Fixed IP address.
IP Wireless Security Camera A02-IPCAM-W54_ME01 46 The License Agreement prompt will appear as below . Read the deta ils carefully and click the “Yes” button to continue with the installation procedure . Click the “Finish” button to comple te Setup of the Xplug Control Utility program for the IP Security Wireless Camera.
IP Wireless Security Camera A02-IPCAM-W54_ME01 47 Appendix D Adjust IP Security Wireless Camera Focus To adjust the focus of the lens, yo u need to turn the lens slowly in e ither clockwise or anti-clockwise direction until the desired image appears. DO NOT over turn the lens in either of the directions as it will be out of focus.
IP Wireless Security Camera A02-IPCAM-W54_ME01 48 Appendix E Specification Video specification: Resolution: 640 x 480 pixel Sensor: color CMOS sensor Gain control: Automatic Exposure: Automatic White Balance: Automatic Focal Length: 6.0 mm Aperture: F=1.
IP Wireless Security Camera A02-IPCAM-W54_ME01 49 Browser Support System requirement: CPU: Pentium III, 700 MHz or above Memory Size: 64 MB (128 MB recommended) VGA card resolution: 800x600 or above Internet Explorer 5.0 or above (ActiveX Mode –V iew Image supports Internet Explorer under Windows OS) Netscape 6.
IP Wireless Security Camera A02-IPCAM-W54_ME01 50 APPENDIX F Support If you have any problems with the IP Security Wireless Camera, pl ease consult this manual. If you have any other questions you can contac t the Atlantis Land company directly at the following address: Atlantis Land SpA Viale De Gasperi, 122 20017 Mazzo di Rho(MI) Tel: +39.
Ein wichtiger Punkt beim Kauf des Geräts Atlantis Land A02-IPCAM-W54 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Atlantis Land A02-IPCAM-W54 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Atlantis Land A02-IPCAM-W54 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Atlantis Land A02-IPCAM-W54 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Atlantis Land A02-IPCAM-W54 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Atlantis Land A02-IPCAM-W54 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Atlantis Land A02-IPCAM-W54 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Atlantis Land A02-IPCAM-W54. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Atlantis Land A02-IPCAM-W54 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
