Benutzeranleitung / Produktwartung PIG00-10773 des Produzenten Petsafe
Zur Seite of 36
P etSafe ® Delux e Little Dog In-Ground F ence ™ Operating and T raining Guide Please read this entire guide before beginning. Model Number PIG00-10773.
2 Customer Care Center 1-800-732-2677 Important Safety Information Explanation of Attention W ords and Symbols used in this guide This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
www .petsafe.net 3 CAUTION This PetSafe ® In-Ground Fence ™ is not a solid barrier. This system is designed to act as a deterrent to remind pets by Static Correction to remain in the boundary established. It is important that you reinforce training with your pet on a regular basis.
4 Customer Care Center 1-800-732-2677 NOTICE Plug the Surge Protector into a grounded (3-prong) outlet that is • within 5 feet of the Fence Transmitter. ALWAYS use a grounded (3-prong) outlet to ensure maximum protection. Do not remove the ground prong from the Surge Protector • plug.
www .petsafe.net 5 Thank you for choosing P etSafe ® brand. Y ou and y our pet deser ve a companionship that includes memorable moments and a shared understanding together. Our products and training tools promote a lifestyle of protection, teaching, and lo v e — essentials that infl uence memor ies for a lifetime.
6 Customer Care Center 1-800-732-2677 T roubleshooting ............................................................................... 30 Additional Infor mation ....................................................................... 31 System T est .
www .petsafe.net 7 Components Other Items Y ou May Need Additional wire and fl ags • (Part #PRFA-500) T ape measure • Small Phillips screwdriver • Drill & mounting hardware • Shov el or l.
8 Customer Care Center 1-800-732-2677 How the System W orks A radio signal trav els from the F ence T ransmitter through a buried wire, marking the boundaries you wish to set for your dog. Y our dog wears a Receiver Collar that detects the signal at the boundary .
www .petsafe.net 9 Operating Guide Locate the F ence T ransmitter Place the Fence T ransmitter : In a dr y , well ventila ted, protected area ( • 1A, 1B ). In an area where temperatures do not fall below freezing (e.g., garage, basement, • shed, closet).
10 Customer Care Center 1-800-732-2677 Design a layout tha t is suitable for your y ard. Sample la y outs are provided in this section, • and a gr id for designing your lay out is provided in the back of this guide. Fence planning softw are is av ailable online at www .
www .petsafe.net 11 Double Loop A Double Loop must be used when you are not establishing the Boundary Zone on all sides of your property . When using a Double Loop, the Boundar y Wire must be separated by a minimum of 5 FEET to av oid canceling the signal.
12 Customer Care Center 1-800-732-2677 P osition the Boundar y Wire Lay out the Boundary Wire using your planned boundar y and test the system BEFORE burying the wire or attaching it to an existing fence. This will make any la yout changes easier . W ork carefully .
www .petsafe.net 13 T o Splice or Repair the Boundar y Wire If you need additional Boundary Wire to expand your wire loop, you will need to splice the wires together. Note the locations of all splices for future reference. Strip approximately 3 ⁄ 8 inch of insulation off the ends of the Boundar y Wires to be spliced ( 3D ).
14 Customer Care Center 1-800-732-2677 Connect the Wires to the Surge Protector and F ence T ransmitter (USA and Canada) Surge Protection Lightning strikes that occur even several miles a way from y our installation can create pow er surges or spikes which may damage your unprotected electronic pet containment system.
www .petsafe.net 15 T ur n the power OFF to the 1. outlet that the Surge Protector and Fence T ransmitter will be plugged into . W e recommend that, if 2. possible, use the outlet center screw that holds the cov er plate in place to secure the Surge Protector to the outlet.
16 Customer Care Center 1-800-732-2677 Connect the Wires to the F ence T ransmitter (Australia & New Zealand) Ground Wire (4C) Proper grounding , although not necessary for the system to work, will help reduce the chance of electrical surges causing damage to your F ence T ransmitter and/or Po w er Adapter.
www .petsafe.net 17 Prepare the Receiv er Collar T o Inser t and Remov e the Batter y Note: Do not install the batter y while the Receiver Collar is on y our pet. This Receiver Collar utilizes a replaceable P etSafe ® batter y (RF A-188). This unique batter y is designed to make battery replacement easier and increase water protection.
18 Customer Care Center 1-800-732-2677 The Static Correction Levels increase from 1 to 5. Pushing the Cor rection Level Button while the Receiver Collar is on lev el 5 will cause the Receiver Collar to revert to level 1. Refer to the Function and Response T able to choose the Static Correction level that best fi ts your pet.
www .petsafe.net 19 Set the Boundar y Width and T est the Receiv er Collar With the Boundar y Wire in place and properly connected, it is time to set the containment fi eld and test the system. CAUTION The Receiver Collar should NOT be on your dog when the system is tested.
20 Customer Care Center 1-800-732-2677 T wo seconds after the warning tone, the test light will begin to fl ash. This fl ashing light can aid you in identifying the Boundary Width should you have diffi culty hearing the tone.
www .petsafe.net 21 Install the Boundar y Wire NOTICE Before you begin installing the Boundary Wire, unplug the Fence Transmitter power adapter from the Surge Protector or outlet. T o Bur y the Boundar y Wire Bur ying the Boundar y Wire is recommended to protect it and prevent disabling the system.
22 Customer Care Center 1-800-732-2677 T o Cross Hard Surf aces (dr iv eways, sidewalks, etc.) WARNING Follow all safety instructions for your power tools.
www .petsafe.net 23 Fit the Receiv er Collar Impor tant: The proper fi t and placement of your Receiv er Collar is important for effective training. The Contact Points must ha v e direct contact with your pet’ s skin on the underside of his neck. CAUTION Please read and follow the instructions in this manual.
24 Customer Care Center 1-800-732-2677 The Receiver Collar should fi t snugly , y et loose 4. enough to allow one fi nger to fi t between a contact point and your pet’ s neck ( 9B ). Allo w your pet to w ear the collar for sev eral minutes, then re-check the fi t.
www .petsafe.net 25 T raining Guide Be P atient With Y our P et Impor tant: Proper training of your pet is essential to the success of the P etSafe ® Deluxe Little Dog In-Ground F ence ™ . Read this section completely before beginning to train your pet.
26 Customer Care Center 1-800-732-2677 Steps: Begin by walking your pet on a leash in the P et Area. Calmly praise and talk 1. to your pet. Mov e toward the Boundary Flags ( 2. 10A ). Keep your mood happy . With full control of your pet on a leash, walk to the fl ags.
www .petsafe.net 27 Days 5 thru 8 - Distraction Phase P erform three training sessions per day , each lasting 10 to 15 minutes . Goal: T o train your pet to stay within the P et Area with distractions outside of the P et Area.
28 Customer Care Center 1-800-732-2677 Days 9 thru 14 - Unleashed Super vision T raining sessions should star t at 10-15 minutes, gradually increasing to over an hour. Y our pet is ready for this step only when he clearly avoids the entire Static Correction Zone , regardless of any distractions or temptations .
www .petsafe.net 29 Accessor ies T o purchase additional accessories for your P etSafe ® Deluxe Little Dog In-Ground F ence ™ , contact the Customer Care Center at 1-800-732-2677 or visit our website a t www .petsafe.net to locate a retailer near you.
30 Customer Care Center 1-800-732-2677 T roubleshooting Receiver Collar is not beeping or correcting. Check battery to make sure it is installed properly and tur ned to the • ON position. P erform Static Correction and Batter y T est (page 17). If Ba ttery Status • LED does not fl ash Green, replace the battery .
www .petsafe.net 31 The P ower and Loop Indicator Lights are off . Check that the P ower Adapter is plugged into the Fence T ransmitter. • Check that the Po wer Adapter and/or Surge Protector are plugged • in properly . If the system is plugged into a GFCI or RCD outlet, check to see if the • circuit has been tr ipped.
32 Customer Care Center 1-800-732-2677 System T est The system test is used to determine the cause of system problems that have not been addressed elsewhere in this guide. Y ou will need a 10 foot piece of Boundar y Wire with 3 ⁄ 8 inch of insulation removed from each end to use as a test loop wire.
www .petsafe.net 33 T ransmitter Loop T est (USA and Canada) The T ransmitter Loop T est is a simple test to deter mine the cause of a “Boundary Wire Broken or Disconnected” alar m indication. Y ou will need a shor t 10 foot piece of Boundar y Wire with 3 ⁄ 8 inch of insulation str ipped from both ends.
34 Customer Care Center 1-800-732-2677 Wire Break Loca tion T est Please follow these steps in determining where you hav e a break in y our Boundary Wire: Locate your original splice(s) and verify they have a good, solid connection. 1. Check your yard to determine any possible damage to the Boundary Wire (e.
www .petsafe.net 35 Compliance FCC/Canada This Class B digital apparatus complies with Canadian ICES-003. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Radio Systems ® Corporation 10427 Electric A venue Knoxville, TN 37932 1-800-732-2677 www .petsafe.net Protected by US Pa tents 6,921,089, 7,541,937, and D531,117. Other patents pending. 400-1188/1 ©2007 Radio Systems Corporation Lay out Gr id 3.000" (7.
Ein wichtiger Punkt beim Kauf des Geräts Petsafe PIG00-10773 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Petsafe PIG00-10773 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Petsafe PIG00-10773 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Petsafe PIG00-10773 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Petsafe PIG00-10773 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Petsafe PIG00-10773 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Petsafe PIG00-10773 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Petsafe PIG00-10773. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Petsafe PIG00-10773 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
