Benutzeranleitung / Produktwartung C1917M des Produzenten Pelco
Zur Seite of 24
CC4700-2 1/2-Inch Color Camera Installation/ Operation Manual C1917M (12/97) Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or.
22 Pelco Manual C1917M (12/97) ii CONTENTS Section Page 1.0 GENERAL .................................................................................................. 1 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS ............................... 1 1.2 REGULA TOR Y NOTICES .
Pelco Manual C1917M (12/97) 23 LIST OF ILLUSTRA TIONS Figur e Page 1 Location of Parts and Controls .......................................................... 4 2 Removal of Camera Cover ................................................................
24 Pelco Manual C1917M (12/97) iv (This page intentionally left blank.).
Pelco Manual C1917M (12/97) 1 Please thor oughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following WARNINGS should be observed.
2 Pelco Manual C1917M (12/97) 1.2 REGULA TOR Y NOTICES This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Pelco Manual C1917M (12/97) 3 2.0 DESCRIPTION The CC4700-2 color video camera has the following features: Imager The camera uses a 1/2-inch CCD (Charge Coupled Device). High Sensitivity The camera gives a clear picture even under very gloomy conditions.
4 Pelco Manual C1917M (12/97) 3.0 LOCA TION OF P AR TS AND CONTROLS Figure 1. Location of Parts and Controls MOUNTING SCREW HOLES BACK FOCUS ADJUSTMENT SCREW LENS MOUNT (C-MOUNT) LENS CONNECT OR (4-PI.
Pelco Manual C1917M (12/97) 5 4.0 INST ALLA TION 1. Remove the six (6) Phillips screws that hold the upper cover to the camera body and remove the cover (refer to Figure 2). 2. Set the internal switches according to the conditions in which the camera will be used (refer to Figures 2 and 3).
6 Pelco Manual C1917M (12/97) 3. Replace the upper cover on the camera body . 4. Make sure that you have the right type of lens to install on the camera. The lens must be a C-mount type, and the screw thread must not project more than 9 mm (3/8-inch) from the lens mounting surface (refer to Figure 4).
Pelco Manual C1917M (12/97) 7 6. When using an auto-iris lens, install it as follows. For a manual iris lens, omit step c. Refer to Figure 6. a. Unscrew the lens mount cap (1). b. Screw in the lens (2). c. Plug in the lens cable (3). Figure 6. Lens Installation Figure 7.
8 Pelco Manual C1917M (12/97) 8. Connect power to the camera (refer to Figure 8). This camera must always be operated with a 24 V AC class 2 power supply . In the U.S.A., use a power supply that is UL Listed. In Canada, use a power supply that is CSA Certified.
Pelco Manual C1917M (12/97) 9 Wire Gauge Maximum distance from transformer to load T able A. 24 V AC Wiring Distances The following are the recommended maximum distances for 24 V AC applications and are calculated with a 10-percent voltage drop. (10-percent is generally the maxi- mum allowable voltage drop for AC-powered devices.
10 Pelco Manual C1917M (12/97) 9. Connect a video cable to the VIDEO OUT connector on the camera (refer to Figure 8). Refer to T able B for the type of video coaxial cable to use. 10. Set the SYNC (synchronization) switch. INT (internal): for using the internal synchronizing signal.
Pelco Manual C1917M (12/97) 11 4.1 ADJUSTMENTS T urn on the camera power and make the following adjustments. 4.1.1 White Balance After fitting the lens and making all the installation connections, use a monitor to check the picture and set the white balance as described below (refer to Figure 9).
12 Pelco Manual C1917M (12/97) 4.1.2 V er tical Phase Use the V PHASE (vertical phase) button to compensate for vertical phase discrep- ancies that may occur when two or more cameras are used when the SYNC switch is set to L.L. Use the tip of a ballpoint pen or the like to press the button.
Pelco Manual C1917M (12/97) 13 Zoom Lens Models 1. With the camera operating, view an object at least 75 feet away . 2. Make sure the lens iris is wide open. * If outdoors use a neutral density filter in front of the lens to insure that the iris is fully open.
14 Pelco Manual C1917M (12/97) 5.0 OPERA TION A void aiming the camera at a very bright object (such as light fixtures) for an ex- tended period..
Pelco Manual C1917M (12/97) 15 6.0 TROUBLESHOOTING The following conditions that may be observed when using a CCD camera are not associated with any fault of the camera.
16 Pelco Manual C1917M (12/97) 7.0 MAINTENANCE Be careful not to spill water or other liquids on the unit, or to get combustible or metallic material inside the body . Foreign material inside the camera could cause it to fail or be a cause of fire or electric shock.
Pelco Manual C1917M (12/97) 17 8.0 SPECIFICA TIONS Pickup Device: 1/2-inch interline transfer type CCD Effective Picture Elements: 768 (H) x 494 (V) Sensing Area: 6.
18 Pelco Manual C1917M (12/97) Dimensions: See Figure 10 Weight: 660 g approx. (1 lb 7 oz) Fuse: 125 VAC, 500 mA (Design and product specifications subject to change without notice.) Figure 10. CC4700-2 Dimension Drawing BA CK FOCUS LENS COLOR VIDEO CAMERA Hi Resolution 6.
Pelco Manual C1917M (12/97) 19 NOTES.
20 Pelco Manual C1917M (12/97) Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco.
Ein wichtiger Punkt beim Kauf des Geräts Pelco C1917M (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pelco C1917M noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pelco C1917M - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pelco C1917M reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pelco C1917M erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pelco C1917M besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pelco C1917M verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pelco C1917M. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pelco C1917M gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
