Benutzeranleitung / Produktwartung C1629M-F des Produzenten Pelco
Zur Seite of 48
INSTALLATION C1629M-F (3/08) Endura ® DVR5300 Series Digital V ideo Recorder.
.
C1629M-F (3/08) 3 Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Frame Rate Notice Regarding User-Selec ted Options .
4 C1629M-E (3/07) List of Illustrations 1 Major Package Compon en ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2 Hard Drive Pack .
C1629M-F (3/08) 5 List of T ables A DVR5348/ENC5300 USB Connec tors and Colors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 B DVR5324/ENC5300 USB Connec tors and Colors .
6 C1629M-F (3/08) Regulatory Notices This device co mplies with Part 15 of the FCC Rul es. Operation is subject to the following two conditions: (1) this device may n ot cause ha rmful interference, and (2 ) this device must accept any interference received, including interference that may ca use undesired operat ion.
C1629M-F (3/08) 7 Description The DVR5300 Series digital video recorder (D VR) represents a whole new concept in en terprise digital vi deo recording solutions. It is one of the recording co mponents of Endu ra ® , Pelco’ s most advanced integrated vi deo security system.
8 C1629M-F (3/08) MODELS *All six-drive models includ e six empty hard drive carrier s. OPTIONAL ACCESSORIES ENC5316 16-channel USB video encoder , up to three ENC53 00 units per D VR5300 Serie s unit.
C1629M-F (3/08) 9 Before Y ou Begin Endura is a network system that re quires a contin uous amount of bandwidth to transmit tr ue, live video. Therefore, always inclu de you r network administrator when plan ning and installing Endura components.
10 C1629M-F (3/08) USER SUPPLIED PARTS In addition to the stan da rd tools and cables required for a video security insta llation, you will need to provide the following items: • Power source (1 10 .
C1629M-F (3/08) 11 Figure 3. Accessory Pack Figure 4. Rack Mount Kit RA C K MOUNT KIT A CC E SS ORY P A C K FRONT BEZEL KEY 2 EA. UK S T ANDARD POWER C ORD (250 V A C ) 2 EA. U S B S TI C KER S 1 EA. EUROPEAN S T ANDARD POWER C ORD (220 V A C ) 2 EA. U S A S T ANDARD POWER C ORD (110 V A C ) 2 EA.
12 C1629M-F (3/08) APPLICATION SCENARIOS This section illustrates two possible ap plication sce narios featur ing the DVR53 00 Series digi tal video re corder . Figure 5 shows a DVR534 8 digital video recorder with two ENC5316 USB mul tichannel vid eo encoders.
C1629M-F (3/08) 13 Figure 6. Security Network with a DVR5324, EN C5308s, and CM9700 Matrix Switch MONITOR SM5000 GIGABIT SWITCH WS5000 DVR5324 ENC5308 (UP TO 3) CM9700 SERIES MATRIX BAY CPU LIVE/ PLAY.
14 C1629M-F (3/08) Equipment Placement and Rack Mounting UNPACKING THE DVR5300 The DVR5300 Series digital video recor de r sh ips with two smaller boxes as shown in Figure 7. One contains the ha rd drive pack. T he other contains th e accessory p ack.
C1629M-F (3/08) 15 Figure 8. Product Serial Number Label RACK MOUNTING The DVR5300 mou nts into an in dustry-stand ard 19-inch (48 cm) equip ment rack. The D VR5300 occupie s 3 RU (rack un its) of vertica l rack space (5.25 inches or 13.3 cm). The hardwa re necessa ry to mount the DVR5300 into a rack is supplied with the unit.
16 C1629M-F (3/08) Figure 9. Fastening Mounting Brackets to Chassis 2. Attach one front-mount rail to one rear -mount rail. Ma ke sure the r ails are mounte d back to back, as shown in Fi gure 10 . Depen ding on rack depth, use either three or four 8-32 x 0.
C1629M-F (3/08) 17 Figure 11. Inserting Cage Nuts 5. Attach one supp or t ra il as s embl y to the equipment ra ck in the desired loca ti on (refer to Figure 12): NOTE: The suppor t rail assembl ies are identi cal and ma y be used on either the r ight or left side of the r ack.
18 C1629M-F (3/08) Figure 12. Attaching Support Rails 6. Repeat ste p 5 for the second support rail assemb ly . 7. Attach one rack rail spacer to the fr ont of the equipment rack (refer to Fig ure 13): a. Position th e bottom hol e of the space r above the e ar of the front-mount r ail.
C1629M-F (3/08) 19 Figure 13. Attaching Rack Rail Spacers 8. Repeat ste p 7 for the second spacer . 9. T ighten the 8-32 x 0.375-inch Phillips tru ss head screws that were atta c hed to the front- and rear -mount rails in steps 2 and 3. 10. Place th e unit onto the mount rails by sliding th e cha ssis brackets onto the rails.
20 C1629M-F (3/08) Figure 14. Mounting the DVR5300 into the Rack 11. After the unit is in place, tighte n th e two thumbscrews to secure the unit to the rack. Figure 15. T i ghtening the Thumbscrews WAR N IN G : When sliding out the DVR5300, be care ful not to let the unit fa ll ou t of the rack.
C1629M-F (3/08) 21 Hard Drive Array Installation All DVR5300 Ser ie s recorders use RAID 5 to maximize fault toleran ce and enhance disk-access p erformance. The unit incorp orates two RAID 5 controllers; each manages an independent storage ar ray of six dr ives.
22 C1629M-F (3/08) On six-drive mod els (1.5 TB/3.0 TB), carriers 1 thr ough 6 cont ain hard drives. Carriers 7 through 12 do not co ntain h ard drives , but should be installed to maintain prop er air circula tion in the unit. Upgrade kits are available th at increase the unit capacity o f th e si x-drive models b y 1.
C1629M-F (3/08) 23 4. Make sure the hard drive carrier h as been installed cor rectly . Without squeezing the sp ring-loaded release tabs, gen tly pull th e plastic front cover of the carrier away from th e chassis. If the carrie r does no t pull out, the dr ive is secure.
24 C1629M-F (3/08) Connections Familiarize yourself with the DVR5300 rear panel before connecting any equipment to the unit. Figure 20. Rear Panel Layout CONNECTING POWER The DVR5300 is equipp ed with two hot-swa ppable power supplie s. These autorang in g power supplies adapt automa tically to voltages between 100 V AC and 240 V AC (50/60 Hz).
C1629M-F (3/08) 25 CONNECTING ENC5300 SE RIES VIDEO ENCODERS Y ou can conne ct up to th ree ENC5300 Series vide o encoders to th e DVR5300 Series digital video recorder .
26 C1629M-F (3/08) 5. Apply a matching colo re d sti cker (red, yello w , or blue) next to the USB connector on the DVR5300 rea r pa nel. This identifies the USB cable (red, yellow , or blue) that should be connected t o this ENC5300. Figure 21. Connecting ENC5300s to a DVR5300 6.
C1629M-F (3/08) 27 Figure 22. Network Cable Connection 2. Connect the o ther end of the UTP cable to an available po rt on a Pelco-approved Gigabit Et he rnet switch. Contact Pelco’ s Prod uct Su pport for a list o f approved Gig abit Ethernet switches (refer to Appendix F: T roubleshooting on page 43 for contact infor m atio n).
28 C1629M-F (3/08) Figure 23. Star (CM9760-CDU-T) Connections 2. Connect eith er end of the enclo sed STRAIGHT cable to the conn ector labeled I/O RS422 on the D VR5300 rea r panel. Th e STRAIGHT cable is 6 feet (1.8 m) and has a black STRAIGHT label.
C1629M-F (3/08) 29 Figure 24. RJ-45 Pin Assignments to CM9760-CDU-T 3. Connect the o ther end of the STRAIGHT cable to the IN connec tor on the CM9760-CDU-T . 4. T o co nnect a second or third CDU: a. Use the REVERSE cable that is included with the additional CDU.
30 C1629M-F (3/08) Operation Refer to the WS5000 Oper ation manual fo r details on how to access a nd configure the DVR5300. NOTE: T o make sure that all diag nost ic me ssage s will a ppear to a system op er ator , leave at le ast one WS5 000 En dura w orksta tion or VCD 5000 video console display running at all times.
C1629M-F (3/08) 31 UNIT STARTUP T o start the unit: 1. Unlock and ope n the bezel cover . 2. Press the power button. The power indicator glows. 3. Close and lock the bezel cov er . ì Power Indicator (Pelco badge): The Pelco badge glows blue when the unit ha s power .
32 C1629M-F (3/08) Figure 27. Opening the Front Bezel Cove r UNIT SHUTDOWN Y ou can shut down the DVR5300 in e ither of two ways. An orderly s hutdown lets t he unit close it s files and power down withou t affecting the data file s. Use the or derly shutdown in most cases .
C1629M-F (3/08) 33 Appendix A: Expanding V ideo Storage Y ou can increase th e video storage capacity of the DVR5300 by ad di ng one or more SEB510 0 Series storage expansion boxe s.
34 C1629M-F (3/08) INSTALLING MULTIPLE SEB5100 UNITS (SWITCH) Use a ded icated, Pelco-approved Gi gabit Ethernet switch to expa nd the video stor ag e of the DVR5300 quickly and easily . First, c onne ct the DVR5300 to the switch. Then co nnect up t o eight SEB5100 units to the s witch.
C1629M-F (3/08) 35 INSTALLING ADDITIONAL SEB5 100 UNITS (EXISTING SWITCH) T o a dd an SEB5100 un it to an existi ng DVR5300 with a Gigabit Ether net switch: 1. Connect one end of a UTP c able to a fr ee RJ-45 po rt on the sw itch. Use a stan dard Cat5e o r better UTP ca ble with RJ-4 5 connec tors.
36 C1629M-F (3/08) Appendix B: Replacing a Hard Drive Since the DVR53 00 runs cont inuously , a ha rd drive may fail at some poi nt. If this h appens, the in dicator for the failed d rive g lows red. NOTES: • The HD5000 Se ries hard dri ve replacem ent kit include s a single ha rd drive car rier with a Pe lco-certifi ed hard drive .
C1629M-F (3/08) 37 Figure 31. Removing the Hard Drive Carrier 7. Copy the dri ve number ont o the drive l abel on the replacement hard drive carrier . 8. Install th e replacemen t hard dri ve carrier a s follows: a. Orient the drive carrier so that the drive status in dicator is p ointing up.
38 C1629M-F (3/08) The unit al arm stops and d rive initiali zation begins . Drive initializa tion can take up to 15 hour s. During initialization, the drive stat us indicator flashes red. Figure 32. Installing the Hard Drive Carrier NOTES: • The unit cont inues recordin g properly duri ng hard drive initialization.
C1629M-F (3/08) 39 Appendix C: Replacing a Power Supply The DVR5300 in corporates two independe nt, hot-swap pable power supplies. Each power supply acts as a re dundant alt ernate fo r the other . This level of fau lt tolerance ensures that the DVR5300 is ca pable of susta ining uninte rruptible op eration, even if one power su pply fails.
40 C1629M-F (3/08) Figure 34. Removing the Power Supply 6. Orient the re placement po wer supply so th at the cord receptacle i s at the bo ttom of the unit . Figure 35. Installing the Power Supply 7. Gently push the re pla cement powe r supp ly int o th e unit until it lock s int o pla ce.
C1629M-F (3/08) 41 Appendix D: Installing an Uninterruptible Power Supply (UPS) Y ou should connect e ach DVR5300 Serie s digital video reco rder to a UPS (not sup plied). UPS devices maint ain a limited amount of backup batte ry power in case the main power fails.
42 C1629M-F (3/08) Appendix E: Replacing the Operating System Drive The DVR5300 uses a compact flash drive fo r th e unit operating system. In addition to g reater reli ability, this drive can be easi ly replaced if a failure occurs. NOTES: • Y ou must shut down the unit to replac e th e operating system drive.
C1629M-F (3/08) 43 Appendix F: T roubleshooting If the following in structions fail to solve yo ur problem, contact Pelco’ s Product Su pport at 1-800-289-91 00 (USA or Canada) or 1-559-292-19 81 (international) for assistance.
44 C1629M-F (3/08) Specifications SYSTEM Operating Syst em Linux ® User Interface Remote operat ion from WS5000 or VCD5000 Vide o Sto rage Capacity Up to 6.
C1629M-F (3/08) 45 ENVIRONMENT AL Operating T emperature 50° to 95°F (1 0° to 35°C) at un it air intake ( front of unit) Storage T emperature -40° to 1 49°F (-40° to 65 °C) Operating Humidity 20% to 80%, noncondensing Maximum Humidity Gradient 10% per ho ur Operating A ltitude -50 ft to 10,000 ft (-1 6 m to 3,04 8 m) Operating V ibration 0.
.
PRODUCT W ARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without c harge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
Ein wichtiger Punkt beim Kauf des Geräts Pelco C1629M-F (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pelco C1629M-F noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pelco C1629M-F - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pelco C1629M-F reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pelco C1629M-F erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pelco C1629M-F besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pelco C1629M-F verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pelco C1629M-F. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pelco C1629M-F gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
