Benutzeranleitung / Produktwartung LS3E des Produzenten Panduit
Zur Seite of 30
P an-Quik ™ LS3E Printer Operator Manual English V er sion (Consult Factory f or Additional Languages) P anduit Corp. 1819 Atlanta Highway Cumming, GA 30040 USA Attention: Labeling Systems Department 1-888-506-5400, ext.
INDEX Introduction and Safety . . . . . . . . . . . . . . . . . . . . . . . .1 W arranty Information . . . . . . . . . . . . . . . . . . . . . . . . . .3 Printer Set-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Battery Pack and Charging .
INTRODUCTION The LS3E P an-Quik ™ Hand-Held Printer is the complete printing solution for Electricians, Assemblers, Maintenance & Repair , Construction, and Network Communication Personnel.
DO NOT OPERA TE IN WET OR DAMP AREAS Do not operate the product in wet or damp ar eas. Operation of any electrical equipment in such an environment constitutes a definite safety hazard.
This unit includes EMI/RFI filters, however , it is possible that infrequent electrical phenomena may cause printer functions to be temporarily interrupted. This interruption can be corr ected by turning the printer “off,” and then back “on” again.
TECHNICAL SPECIFICA TIONS Dimensions: 4 1/4” W ide x 13 1/4” Long x 3 5/8” High W eight: 2.7 lb. Display: 2 line by 16 character LCD Keyboard: 49 color coded keys with er gonomically designed ke.
CONNECTING THE BA TTER Y CHARGER A battery charger has been included with your LS3E Printer . There is an input connector on the right hand side of the battery pack. Insert the charger plug into the connector and plug the battery charger into an outlet.
printer shuts down. The battery should then be rechar ged fully for 15 hours. When fully charged, the battery pack will measure 14-14.5 volts, and will power the printer all the way down to approximately 1 1 volts.
7 ➃ TO REMO VE LIFT HERE TEAR BAR RIBBON PRINT HEAD ➁ PUSH DOWN ① LOCA TE THE PRINT HEAD IN CENTER OF THE PRINTER WHEN LOADING BE SURE THA T THE RIBBON IS LOCA TED BETWEEN THE PRINT SHIELD AND THE PRINT HEAD . ➂ RO T A TE MANUAL AD V ANCE KNOB T O ALIGN WITH DRIVE PIN.
SECTION 1: Using the SETUP Menu Step 1: T urning the Printer On: Locate the POWER Key , represented by the symbol, found in the upper left hand corner of the keypad. Press and hold the POWER Key until the print head cycles. The LS3E will display the last label code in use.
9 W ARNING: When using heat shrink tubing, the liner must be cut or torn along the perforation by hand. T rying to use the tear bar to cut the heat shrink liner will not work, and may damage the tear bar . T o unload the labels, press and r elease the SHIFT Key and then press and r elease the FEED Key .
10 Step 5: Entering the Desired Legend: The printer features a 2 line by 16 character LCD display . If the legend that you desire is gr eater than 16 characters long or greater than 2 lines high then you will not be able to view the entire legend at one time.
11 QUIK-KEY TM OPTIONS OPTION QUIK-KEY TM CODE PRINT MODE EXAMPLE TEXT FONT K Standard * ABC Q Letter Quality @ ABC R Rotated TEXT SIZE V Compressed T ext ABC S Small T ext ABC N Normal T ext* ABC L L.
Printer Replacement Parts Part Number Description LS3-RIB Replacement Printer Ribbon LS3E-BP Replacement Battery Pack LS3E-MAN-A Replacement Operator Manual LS3EC-* Replacement Battery Charger Optional Accessories Part Number Description LS3E-CP Replacement Battery Charging Pack.
KEY DESCRIPTION CHAR T KEY / SYMBOL FUNCTION P O W E R T urns the printer on, SHIFT then POWER turns the printer off SETUP Activates the SETUP menu. CL R/ DEL DEL-removes the character above the curso.
Notes: The T erminal option can be used in conjunction with serialization (see page 14) and with rotated text. When continuous terminal block labels (labels with code ending with 00) are used, the printer will automatically select the T erminal option for the user .
PRINTING UNDERLINED AND NON-UNDERLINED LEGENDS IN THE SAME LABEL • Key in the portion of the legend that will not be underlined. Use the SP ACE Key to leave blanks where underlined characters will appear . • Press the SETUP Key . Select the Underlined option in the Other Options menu and exit the SETUP menu.
PRINTING UNDERLINED AND NON-UNDERLINED LEGENDS IN THE SAME LABEL • Key in the portion of the legend that will not be underlined. Use the SP ACE Key to leave blanks where underlined characters will appear . • Press the SETUP Key . Select the Underlined option in the Other Options menu and exit the SETUP menu.
Notes: The T erminal option can be used in conjunction with serialization (see page 14) and with rotated text. When continuous terminal block labels (labels with code ending with 00) are used, the printer will automatically select the T erminal option for the user .
KEY DESCRIPTION CHAR T KEY / SYMBOL FUNCTION P O W E R T urns the printer on, SHIFT then POWER turns the printer off SETUP Activates the SETUP menu. CL R/ DEL DEL-removes the character above the curso.
Printer Replacement Parts Part Number Description LS3-RIB Replacement Printer Ribbon LS3E-BP Replacement Battery Pack LS3E-MAN-A Replacement Operator Manual LS3EC-* Replacement Battery Charger Optional Accessories Part Number Description LS3E-CP Replacement Battery Charging Pack.
11 QUIK-KEY TM OPTIONS OPTION QUIK-KEY TM CODE PRINT MODE EXAMPLE TEXT FONT K Standard * ABC Q Letter Quality @ ABC R Rotated TEXT SIZE V Compressed T ext ABC S Small T ext ABC N Normal T ext* ABC L L.
10 Step 5: Entering the Desired Legend: The printer features a 2 line by 16 character LCD display . If the legend that you desire is gr eater than 16 characters long or greater than 2 lines high then you will not be able to view the entire legend at one time.
9 W ARNING: When using heat shrink tubing, the liner must be cut or torn along the perforation by hand. T rying to use the tear bar to cut the heat shrink liner will not work, and may damage the tear bar . T o unload the labels, press and r elease the SHIFT Key and then press and r elease the FEED Key .
SECTION 1: Using the SETUP Menu Step 1: T urning the Printer On: Locate the POWER Key , represented by the symbol, found in the upper left hand corner of the keypad. Press and hold the POWER Key until the print head cycles. The LS3E will display the last label code in use.
7 ➃ TO REMO VE LIFT HERE TEAR BAR RIBBON PRINT HEAD ➁ PUSH DOWN ① LOCA TE THE PRINT HEAD IN CENTER OF THE PRINTER WHEN LOADING BE SURE THA T THE RIBBON IS LOCA TED BETWEEN THE PRINT SHIELD AND THE PRINT HEAD . ➂ RO T A TE MANUAL AD V ANCE KNOB T O ALIGN WITH DRIVE PIN.
printer shuts down. The battery should then be rechar ged fully for 15 hours. When fully charged, the battery pack will measure 14-14.5 volts, and will power the printer all the way down to approximately 1 1 volts.
CONNECTING THE BA TTER Y CHARGER A battery charger has been included with your LS3E Printer . There is an input connector on the right hand side of the battery pack. Insert the charger plug into the connector and plug the battery charger into an outlet.
For your pr otection please complete and mail this card within ten (10) w orking days fr om the date of purchase. This will validate y our P anduit Corp.
NO POST AGE NECESSAR Y IF MAILED IN THE UNITED ST A TES BUSINESS REPL Y MAIL FIRST CLASS MAIL PERMIT NO . 4 CUMMING, GA POST A GE WILL BE P AID BY ADDRESSEE P ANDUIT CORP .
Ein wichtiger Punkt beim Kauf des Geräts Panduit LS3E (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panduit LS3E noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panduit LS3E - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panduit LS3E reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panduit LS3E erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panduit LS3E besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panduit LS3E verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panduit LS3E. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panduit LS3E gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
