Benutzeranleitung / Produktwartung WX-CC411 des Produzenten Panasonic
Zur Seite of 37
Operating Instructions <Br o wser Guide> Center Module Model No . WX-CC411 WX-CC412 WX-CC411_PGQP1741ZA_BG_en.indd 1 2014/01/17 15:17:34.
2 Contents Before use ......................................................................... 3 Pref ace ........................................................................... 3 F eatures ........................................................
3 Bef ore use Preface The WX-CC411 and WX-CC412 are Center Modules f or the wireless intercom systems that are used in drive-thru outlets. Features The WX-CC411 is designed f or single lane operation of drive-thru outlets; the WX-CC412 is designed f or dual lane operation.
4 Bef ore use Operation This system suppor ts the follo wing operations that are suited to drive-thru customers. Single lane Operations in an en vironment in which only one order post is installed are referred to as “single lane” operations .
5 Bef ore use T andem lane Operations in an en vironment in which the order posts are installed in series are referred to as “tandem lane” operations. When the vehicle detector f or lane A is OFF and the v ehicle detector f or lane B is set to ON, a tandem lane message urging the customer to mov e to lane A is pla yed bac k.
6 Bef ore use System requirements CPU 1 GHz or f aster 32-bit (x86) processor or 64-bit (x64) processor RAM 1 GB (32-bit) or 2 GB (64-bit) Network function 1 por t 10BASE-T or 1 por t 100BASE-.
7 Operating precautions Router When connecting the Center Module to the Internet via a router, use a broadband router with port forw arding function (e.g. NA T , IP masquerade). Br owser Refresh Rate The browser refresh rate ma y become slo wer depending on the network environment, computer perf ormance and traffic.
8 Netw ork Examples of connections Direct connection to the PC Ethernet cable (category 5, crossover) PC Connection to a network via a hub P anasonic Network Camera (i-pro seri.
9 Br o wser Operation Connecting the Center Module via a PC 1 Launch the PC’ s W eb bro wser . 2 Input the Center Module IP address into the address bar of the Web br owser . Example) http://Center Module IP address This unit has the f ollowing def ault settings as the time of shipment: IP address: 192.
10 Br o wser Operation Operation Screen 3 4 1 5 2 1 Menu panel Displa ys the panel for each men u. The menu panel displa ys the Setup menu and the Inf or mation menu. 2 [select language] pull-down men u Changes the displa y language. Languages that are av ailable are English and F rench.
11 Br o wser Operation 7 [SD memory card] b utton This button is used to confirm the total storage capacity and remaining storage capacity on the SD card inser ted into the Center Module. (p. 26) 8 [Quic k] button This button is used to confirm the operation settings that were set b y touching the (Quick Oper ation button) on the Center Module.
12 Br o wser Operation Configuring network settings [Netw ork] This function is used to configure the network settings of the Center Module. Click the [Installation] b utton, then the [Network] tab . IPv4 Network [DHCP / Static] Displa ys the DHCP of the Center Module.
13 Br o wser Operation UPnP The Center Module is compatible with UPnP (Univ ersal Plug and Pla y). Using UPnP function, y ou can configure the f ollowing settings automatically . Set the router por t forw arding function. (A router that is compatible with UPnP is required.
14 Br o wser Operation [NTP server address] If “Manual” is selected f or [NTP ser ver address (Manual / A uto)], enter the NTP ser ver IP address or host name manually . Number of characters: 1 to 128 T ypes of characters: alphanumeric, characters -.
15 Br o wser Operation [Sender’ s E-mail address] Input the sender’ s email address. The email address entered will appear in the “F rom” line on the email being sent. Number of characters: 3 to 128 T ypes of characters: alphanumeric, characters @ .
16 Br o wser Operation Setting Help contact [Help contact] This tab is used to check the telephone n umber and configure the email transmission settings f or the Help contact screen displa yed on the LCD displa y of the Center Module. Click the [Installation] b utton, then the [Help contact] tab .
17 Br o wser Operation Confirming the gr oup settings f or All-In-One Headsets and Belt P ac ks This function is used to confirm the group settings for All-In- One Headsets and Belt P acks . This setting can be changed through operations on the Center Module.
18 Br o wser Operation Confirming store hours [Store hour s] This tab is used to confirm store hours settings. This setting can be changed through operations on the Center Module. Click the [Store] b utton, then the [Store hours] tab . Store hours [Store hours] Displa ys whether or not store hours is being used.
19 Br o wser Operation Configuring and confirming settings f or each lane This tab is used to configure and confirm settings for each lane. T o displa y this screen, click the [Lane] b utton in the Setup menu panel. T o configure and confirm settings for Lane B, clic k the [Lane B] tab .
20 Br o wser Operation [DSP] This section displa ys the settings for the three functions inv olv ed in voice signal processing (echo canceller , digital noise reduction and ASLC). Echo Canceller : Displays the echo suppression le v el. (OFF/ LO W/MID/HIGH) Digital noise reduction: Displays the noise suppression le vel.
21 Br o wser Operation Message list Displa ys the settings for each g reeter message. This setting can be changed through operations on the Center Module. [No.] Displa ys the number of the greeter message. [Message name] Displa ys the name of the greeter message.
22 Br o wser Operation Confirming reminder message settings [Reminder message] This tab is used to confirm the reminder message that is pla yed at fix ed times to urge the store personnel to work. Click the [Message] b utton, then the [Reminder message] tab .
23 Br o wser Operation Confirming reminder message schedule settings [Reminder schedule] This tab is used to confirm reminder message schedule settings. Click the [Message] b utton, then the [Reminder schedule] tab . [Days of the week] The schedule f or the selected day of the w eek is display ed.
24 Br o wser Operation Confirming alert message settings [Aler t message] This tab is used to confirm the aler t message to be pla y ed during a secur ity aler t. Clic k the [Message] button, then the [Aler t message] tab . [ON/OFF] Displa ys whether or not aler t message is being used.
25 Br o wser Operation Confirming the security aler t settings This screen is used to confirm the operations to be perf or med when a security aler t notice is receiv ed from button F of an All-In-One Headset or Belt P ack or from aler t inputs 1 to 4.
26 Br o wser Operation The SMTP ser ver m ust be set before an email can be sent. T o set the SMTP ser ver , clic k the [Installation] button, then the [Server] tab . The f ollowing substitute characters can be used in the email body .
27 Br o wser Operation Confirming quic k operation settings This button is used to confirm the operation settings that were set b y touching the (Quick Oper ation button) on the Center Module. This setting can be changed through operations on the Center Module.
28 Br o wser Operation P erf orming maintenance on the Center Module This screen is used to check the status of and perf orm maintenance on each de vice. The maintenance menu is f or maintenance staff . T o displa y this screen, click the [Maintenance] b utton in the Setup menu panel.
29 Br o wser Operation Check the [HTTP Status] / [HTTPS Status] after 10 min utes hav e passed since star ting up the router and Center Module. The f ollowing char t shows the meaning and action to tak e for each port forwarding [HTTP Status] / [HTTPS Status].
30 Br o wser Operation Retrieving T ALK & P A GE Recording sound source files [Recor ded data] This tab displa ys sound source files from T ALK & P A GE Recording that were recorded during a security aler t b y holding down b utton F of an All-In-One Headset or Belt P ack.
31 Br o wser Operation Confirming the software version [Update] This tab is used to confirm the software version. Software version updates can also be perf ormed from this screen. Click the [Maintenance] b utton, then the [Update] tab . [System version] Displa ys the system version.
32 Br o wser Operation P assw ord c hange [Old passw ord] Input the current pass word. Number of characters: 4 to 32 T ypes of characters: alphanumeric, characters !#$%'()=~|`{}<>?_-^[]/@*,.
33 Inf ormation displa y men u When the [Inf o] button is clic ked, the menu panel displa ys the Inf or mation display men u panel. 1 2 1 [Headsets] button This button is used to chec k the status of All-In-One Headsets and Belt P acks registered to the Center Module.
34 Inf ormation displa y men u Checking the status of system alerts [System alert] This tab displa ys information about errors that are occurring in de vices that comprise the Center Module. [Initiation time] This column displa ys the time and date of system aler ts.
35 T r oubleshooting Check the f ollowing bef ore requesting repair . Consult your sales shop if these measures do not resolv e a problem, if symptoms not listed here occur , or if you ha ve a question related to engineering. Symptom Cause/solution Reference pages Access is not possible fr om a W eb browser .
36 T r oubleshooting Symptom Cause/solution Reference pages The Center Module cannot be accessed via the Internet. Are the network settings f or the Center Module incorrect? Set the correct default gate wa y and DNS ser ver address . If using the DDNS ser vice, confirm that the settings are correct.
© P anasonic System Networks Co., Ltd. 2014 F0114-0 PGQP1741ZA WX-CC411_PGQP1741ZA_BG_en.indd 37 2014/01/17 15:17:47.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic WX-CC411 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic WX-CC411 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic WX-CC411 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic WX-CC411 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic WX-CC411 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic WX-CC411 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic WX-CC411 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic WX-CC411. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic WX-CC411 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
