Benutzeranleitung / Produktwartung TH-42PHD5 des Produzenten Panasonic
Zur Seite of 40
High Definition Plasma Display Operating Instructions TH-4 2 PH D5 TH-5 0 PH D5 Model No. R - S T A N D B Y G P O W E R O N I N P U T — V O L + P O W E R / PLASMA DISPLAY Before connecting, operating or adjusting this product, please read these instructions completely .
2 W ARNING: T o reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel.
3 Important Safety Instructions 1) Read these instructions. All the safety and operating instructions should be read before the appliance is operated. 2) Keep these instructions. The safety and operating instructions should be retained for future reference.
4 T able of Contents Important Safety Instructions ....................................... 3 FCC ST A TEMENT ........................................................... 5 Safety Precautions ......................................................... 6 Accessories .
5 FCC ST A TEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
6 Safety Precautions W ARNING Set up Do not place the Plasma Display on sloped or unstable surfaces. • The Plasma Display may fall off or tip over . Do not place any objects on top of the Plasma Display .
7 CAUTION This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury . (All of the following accessories are manufactured by Matsushita Electric Industrial Co.
8 PLASMA DISPLA Y INPUT SURROUND VOL NR PICTURE SOUND SET UP ASPECT PICTURE POS. /SIZE OFF TIMER PC.
9 Remote Control Batteries Requires two AA batteries. 1. T urn the transmitter face down. Press and slide off the battery cover . 2. Install the batteries as shown in the battery compartment. (Polarity + or – must match the markings in the compartment.
10 Basic Controls R - ST ANDBY G POWER ON INPUT — VOL + TH-50PHD5 Main POWER ON/OFF Switch VOLUME Adjustment Press the V olume Up “ + ” or Down “–” button to increase or decrease the sound volume level.
11 P R /C R /R P B /C B /B Y/G COMPONENT/RGB IN AV VD HD RL S VIDEO IN VIDEO IN AUDIO IN RL AUDIO AUDIO.
12 1 1 2 2 Connections Speakers connection When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker ’ s Installation Manual for details on speaker installation. A V Input T erminals connection Connect the signal source equipment (see page 14 to 17).
13 Connections A V Input connection VIDEO signal connection S VIDEO IN VIDEO OUT Audio OUT Video OUT RL VIDEO RCA-BNC video cable Video input to BNC socket Audio input to L/R sockets AUDIO 2 × RCA au.
14 Connections COMPONENT/RGB Input connection Notes: (1) Change the “ COMPONENT/RGB-IN ” setting in the “ SET UP ” menu to “ COMPONENT ” . (see page 34) (2) Additional equipment, cables and adaptor plugs shown are not supplied with this set.
15 Connections PC Input T erminals connection Notes: (1) Computer signals which can be input are those with a horizontal scanning frequency of 15.6 to 1 10 kHz and vertical scanning frequency of 48 to 120 Hz. (However , the image will not be displayed properly if the signals exceed 1,200 lines.
16 Signal Names for D-sub 15P Connector Pin layout for PC input terminal Pin No. 1 2 3 4 5 Pin No. 6 7 8 9 10 Pin No. 11 12 13 14 15 Signal Name R G B GND (Ground) GND (Ground) Signal Name GND (Ground.
17 Connections SERIAL T erminals connection Notes: (1) Use the RS-232C cable to connect the computer to the Plasma Display . (2) The computer shown is for example purposes only . (3) Additional equipment and cables shown are not supplied with this set.
18 Power ON/OFF Press the button on the remote control to turn the Plasma Display off. Power Indicator: Red (ST AND-BY) Press the button on the remote control to turn the Plasma Display on. Power Indicator: Green T o turn the power for the Plasma Display of f, press the switch on the Plasma Display, when the Plasma Display is on or in standby mode.
19 Selecting the On-Screen Menu Language Select the Input Signal R - STANDBY G POWER ON INPUT — VOL + — VOL + INPUT Press the INPUT button to select the input video signal desired from equipment such as a VCR which has been connected to the Plasma Display .
20 PLASMA DISPLA Y INPUT SURROUND VOL NR PICTURE SOUND SET UP ASPECT PICTURE POS. /SIZE OFF TIMER PC SET UP SIGNAL SCREENSA VER COMPONENT/RGB-IN SELECT RGB OSD LANGUAGE ENGLISH ( US ) SET UP TIMER On-Screen Menu Display from Remote Control T o PICTURE adjust menu (see page 28) T o ADV ANCED SETTINGS (see page 28, 29) T o PICTURE POS.
21 On-Screen Menu Display from Remote Control Note: “ SIGNAL ” setup menu displays a different setting condition for each input signal. (see page 19) T o SIGNAL screen for RGB (see page 36) T o SIGNAL screen for VIDEO (see page 34, 35) T o SIGNAL screen for COMPONENT (see page 35) Press to access each adjust screen.
22 ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. PLASMA DISPLA Y SURROUND VOL NR PICTURE SOUND SET UP PICTURE POS. /SIZE OFF TIMER PC INPUT ASPECT ASPECT button The aspect mode changes each time the ASPECT button is pressed.
23 ASPECT Controls Mode NORMAL ZOOM FULL JUST Panasonic AUTO Explanation NORMAL will display a 4:3 picture at its standard 4:3 size. ZOOM mode magnifies the central section of the picture. FULL will display the picture at its maximum size but with sight elongation.
24 Adjusting PICTURE POSITION/SIZE PLASMA DISPLA Y SURROUND VOL N PICTURE SOUND SET UP OFF TIMER PC INPUT ASPECT PICTURE POS. /SIZE R.
25 Helpful Hint ( / NORMALIZE Normalization) Adjus1OS./SIZE H-POS H-SIZE V -POS V -SIZE CLOCK PHASE (RGB/PC in Mode) When the Position Right “ ” button is pressed When the Position Right “ ” b.
26 MUTE SOUND NORMALIZE A UDIO MENU BASS TREBLE ST AND ARD ON 0 0 0 BALANCE SURROUND NORMAL SOUND Adjustment 1 2 Select to adjust each item. Press to select the desired adjustment menu. Select the desired level by listening to the sound. Automatically controls proper volume level.
27 SURROUND Controls SURROUND Button The benefits of surround sound are enormous. Y ou can be completely enveloped in sound; just as if you were at a concert hall or cinema. The surround setting switches ON and OFF each time the SURROUND button is pressed.
28 PICTURE NORMALIZE PICTURE MENU BRIGHTNESS COLOR ST ANDARD 0 0 TINT COLOR TEMP NORMAL ADV ANCED SETTINGS ON PICTURE 20 0 0 SHARPNESS NORMAL Helpful Hint ( / NORMALIZE Normalization) Press the left or right button to select “ ON ” . Press the down button to enter ADV ANCED SETTINGS mode.
29 ADV ANCED SETTINGS Helpful Hint ( / NORMALIZE Normalization) Note: In PICTURE, there is not a noticeable change even when contrast is increased with a bright picture or reduced with a dark picture.
30 PRESENT TIME OF DA Y Set SET UP TIMER The timer can switch the Plasma Display ON or OFF . Before attempting T imer Set, confirm the PRESENT TIME OF DA Y and adjust if necessary . Then set POWER ON TIME/POWER OFF TIME. Display the SET UP TIMER screen T o set up PRESENT TIME, follow the procedure described below .
31 TIMER Set Press to display the POWER ON SET UP/ POWER OFF SET UP screen. Press to select POWER ON TIME/POWER OFF TIME. 1 Press to select HOURS ADJUSTMENT/ MINUTES ADJUSTMENT . Press to adjust each time. 2 Press to select POWER ON FUNCTION/ POWER OFF FUNCTION.
32 SCREENSA VER (For preventing after-images) 2 3 1 4 Press to display the SETUP menu screen. SET UP Press to select the SCREENSA VER. Press to select the SCREENSA VER screen. Press to select the FUNCTION. Press to select the desired function. Press to select the MODE.
33 Setup of SCREENSA VER T ime 5 SCREENSA VER Press to select ST ART TIME/ FINISH TIME (When TIME OF DA Y is selected). Press to select SHOW DURA TION/ SA VER DURA TION (When INTERV AL is selected).
34 3D Y/C FIL TER – For NTSC Video images SET UP for Input Signals COMPONENT/RGB IN SELECT Select to match the signals from the source connected to the COMPONENT/RGB input terminals. Y, P B , P R signals “ COMPONENT ” R, G, B, HD, VD signals “ RGB ” SURROUND VOL N SOUND INPUT ASPECT PICTURE POS.
35 SET UP for Input Signals COLOR SYSTEM / Panasonic AUT O Select SIGNAL from the “ SET UP ” menu during VIDEO (S VIDEO) input signal mode.( “ SIGNAL [VIDEO] ” menu is displayed.) Press to select the “ COLOR SYSTEM ” or “ Panasonic AUTO ” .
36 Select SIGNAL from the “ SET UP ” menu during RGB or PC input signal mode. Press to select each item. SET UP SIGNAL SCREENSA VER COMPONENT/RGB-IN SELECT RGB OSD LANGUAGE ENGLISH ( US ) SET UP TIMER SIGNAL [ RGB ] SYNC H - FREQ. kHz V - FREQ. Hz H & V 31.
37 T roubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below . Symptoms Some parts of the screen do not light up After-images appear Whirring sounds can be heard from the display unit.
38 TH-42PHD5 TH-50PHD5 120 V AC, 50/60 Hz 5 A 5.5 A 2.4 W 2.4 W 0.9 W 0.9 W Drive method AC type Drive method AC type 42-inch, 16:9 aspect ratio 50-inch, 16:9 aspect ratio 3000:1 920 mm (W) × 518 mm (H) × 1,056 mm (diagonal) 1,106 mm (W) × 622 mm (H) × 1,269 mm (diagonal) No.
39 TH-42PHD5 TH-50PHD5 EUR646525 2 × AA Size 1 × J0KF00000018, 2 × J0KG00000054 2 × TMME187 TY -SP42PWD3W or TY -SP50PHD3W or TY -SP42P5W-K TY -SP50P5W-K TY -ST05-K TY -ST42PW1 TY -ST42PF3 TY -CE42PS1 TY -WK42PV1 TY -WK42PR1 TY -WK42DR1 TY -WK42PRE1 TY -42TM4D 40.
Printed in Japan MBS0602S1072(MS) Panasonic Broadcast & T elevision Systems Company Unit of Matsushita Electric Corporation of America Executive Office : One Panasonic W ay 4E-7, Secaucus, NJ 0709.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic TH-42PHD5 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic TH-42PHD5 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic TH-42PHD5 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic TH-42PHD5 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic TH-42PHD5 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic TH-42PHD5 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic TH-42PHD5 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic TH-42PHD5. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic TH-42PHD5 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
