Benutzeranleitung / Produktwartung PT-LB20VE des Produzenten Panasonic
Zur Seite of 66
ENGLISH R Before operating this product, please read the instructions carefully and save this manual for future use. LCD Pr ojector Operating Instructions Model No. PT -LB20NTE PT -LB20E PT -LB20SE PT -LB20VE TQBJ 0168 Commer cial Use ENTER FREEZE SHUTTER INDEX WINDOW PROJECTOR VOLUME D.
2-E NGLISH IMPOR T ANT SAFETY NO TICE WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.
E NGLISH -3 Preparation WARNING: B For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the building installation wiring; B For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
4-E NGLISH.
E NGLISH -5 Preparation Contents Preparation IMPORTANT SAFETY NOTICE ...2 Precautions with regard to safety .........................................6 Accessories ...............................10 Before use ..................................11 Location and function of each part .
6-E NGLISH Precautions with regar d to saf ety W ARNING If you notice smoke, strange smells or noise coming from the projector, disconnect the mains plug from the mains socket. B Do not continue to use the projector in such cases, otherwise fire or electric shocks could result.
E NGLISH -7 Preparation Do not do anything that might damage the mains lead or the mains plug. B Do not damage the mains lead, make any modifications to it, place it near any hot objects, bend it excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.
8-E NGLISH During a thunderstorm, do not touch the projector or the cable. B Electric shocks can result. Do not use the projector in a bath or shower. B Fire or electric shocks can result. Do not look into the lens while the projector is being used. B Strong light is emitted from the projector’s lens.
E NGLISH -9 Preparation Always disconnect all cables before moving the projector. B Moving the projector with cables still attached can damage the cables, which could cause fire or electric shocks to occur. Do not place any heavy objects on top of the projector.
10-E NGLISH Card remote control unit (N2QADC000008 x1) Mains lead (K2CM3DR00002 x 1) Carrying bag (TPEP013-1 x 1) Lithium battery for remote control unit (CR2025 x1) RGB signal cable [1.8 m (5´10˝), K1HA15DA0002 x1] Accessories Check that all of the accessories shown below have been included with your projector.
E NGLISH -11 Preparation Bef ore use Caution when mo ving the pr ojector Be sure to attach the lens cover before moving the projector. The projection lens is extremely susceptible to vibration and shocks. When moving the projector, use the accessory carrying bag.
12-E NGLISH Notes on use In order to get the best picture quality Draw curtains or blinds over any windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen. Do not touch the surfaces of the lens with your bare hands.
E NGLISH -13 Preparation Location and function of each part # Projector control panel (page 16) $ Zoom ring (page 25) % Focus ring (page 25) & Security lock This can be used to connect a commercially-available theft-prevention cable (manufactured by Kensington).
14-E NGLISH # Connector panel (page 15) $ Air outlet port Do not cover this port. % Speaker & Front adjustable legs (L /R) (page 25) ' Air inlet port, Air filter (page 54) Do not cover this port. ( Lamp unit cover (page 55) W ARNING Do not place your hands or other objects close to the air outlet port.
E NGLISH -15 Preparation Connector panel # Power input socket (AC IN) (page 24) The accessory mains lead is connected here. Do not use any mains lead other than the accessory mains lead. $ SERIAL connector (pages 21, 22 and 64) This connector is used to connect a personal computer to the projector in order to control the projector externally.
16-E NGLISH Menu operation <on connector panel:page 15> Remote contr ol unit FREEZE SHUTTER INDEX WINDOW PROJECT OR STD AUT O SETUP INPUT POWER MENU ENTER VIDEO RGB VOLUME D .
E NGLISH -17 Preparation % TEMP indicator (page 52) This indicator illuminates if an abnormally high temperature is detected inside the projector or around it. If the temperature rises above a certain level, the power supply will be turned off automatically and the indicator will flash.
18-E NGLISH Setting-up Pr ojection methods In way of installing projector, any one of the following four projection methods are used. Select whichever projection method matches the setting-up method. (The projection method can be set from the “OPTION” menu.
E NGLISH -19 Getting started H1 L SH L SW 81.2 mm (3-3/16 ˝ ) Pr ojector position L: Projection distance SH: Image height SW: Image width H1: Distance from centre of lens to bottom edge of projected .
20-E NGLISH NOTE: B The dimensions in the table above are approximate. B If you use the projection distance for the 16:9 screen, the 4:3 projection image overflows the screen at the top and bottom. B For details about projected image distances, refer to page 63.
E NGLISH -21 Getting started Connections Notes on connections B Read the instruction manual for each peripheral device carefully before connecting it. B Turn off the power supply for all peripheral devices before making any connections.
22-E NGLISH NOTE: B If the signal cables are disconnected or if the power supply for the computer or video deck is turned off while “D.ZOOM”(digital zoom) or “INDEX WINDOW” is being used, these functions will be cancelled.
E NGLISH -23 Getting started Insert the accessory lithium battery while making sure that the polarities are correct. # While pushing the battery holder tab to the right, pull out the battery holder. $ Insert the battery into the battery holder so that the + side is facing upward.
ENTER FREEZE SHUTTER INDEX WINDOW PROJECTOR VOLUME D .ZOOM STD VIDEO INPUT POWER RGB MENU AUTO SETUP ) * $ & ( ' # T urning on the power Before turning on the power 1. Ensure that all peripheral devices are connected properly. 2. Remove the lens cover.
E NGLISH -25 Basic operation Press the input select b utton to select the input signal. Follow the procedure below when you set the projector up first, and when you change the setup place. Press the A UT O SETUP b utton to initiate automatic positioning.
FREEZE SHUTTER INDEX WINDOW PROJECTOR VOLUME D .ZOOM STD VIDEO INPUT POWER RGB MENU AUTO SETUP ENTER # $ % T urning off the power POWER button Press the PO WER button. B “ POWER OFF ” is displayed on the screen. Press the I I or H H b utton to select “OK”, and then press the ENTER b utton.
E NGLISH -27 Basic operation POWER button on the projector POWER button status Red Illuminated The projector is in standby mode and image projection is possible by pressing the POWER button. A picture is being projected. The lamp is cooling down after the power has been turned off or while direct power off function is operating.
28-E NGLISH Correcting ke ystone distor tion and automatic positioning (A UT O SETUP) This projector detects its degree of tilt and the input signal. Keystone distortion and the position of the image can then be corrected automatically in accordance with the input signal.
E NGLISH -29 Useful functions T urning off the picture and sound momentaril y (SHUTTER) The “ SHUTTER ” function can be used to momentarily turn off the picture and sound from the projector when the projector is not being used for short periods of time, such as during breaks in meetings or when carrying out preparation.
30-E NGLISH ENTER INDEX WINDOW PROJECTOR VOLUME STD VIDEO INPUT POWER RGB MENU AUTO SETUP SHUTTER FREEZE D.ZOOM B The picture will then be enlarged to 1.5 times the normal size. The remote control unit functions during D.ZOOM (digital zoom) Press the D.
E NGLISH -31 Useful functions ENTER PROJECTOR VOLUME D .ZOOM STD MENU AUTO SETUP SHUTTER FREEZE INDEX WINDOW The remote control unit functions during INDEX WINDOW Press the F or G button to select a screen size.
32-E NGLISH On-screen menus Menu screens The various settings and adjustments for this projector can be carried out by selecting the operations from on-screen menus.
E NGLISH -33 Adjustments and settings POSITION menu (page 41) OPTION OSD ON AUTO SEARCH ON AUTO SIGNAL ON AUTO KEYSTN ON RGB2 SELECT INPUT RGB/YP B P R AUTO VGA60/480p 480p SXGA MODE SXGA NR OFF BLACK.
34-E NGLISH # Press the MENU button. The “ MAIN MENU ” will be displayed. $ Press the F F or G G button to select an item. Selected item will be displayed in blue. % Press the ENTER button to accept the selection. The selected menu screen or adjustment screen will then be displayed.
E NGLISH -35 Adjustments and settings & Press the F F or G G button to select an item, and then press the I I or H H button to change or adjust the setting. An individual adjustment screen such as the one shown below will be displayed for bar scale items.
36-E NGLISH Correcting ke ystone distor tion Keystone distortion is corrected automatically when the projector ’ s automatic setup function is used, but this correction will not apply if the screen itself is tilted. In such cases, you can correct the keystone distortion manually with the following procedure.
E NGLISH -37 Adjustments and settings Press the F or G button on the projector or remote control unit to select an item, and then press the I or H button to change the setting. For items with bar scales, press the ENTER button or the I or H button to display the adjustment screen, and then press the I or H button to make the adjustment.
38-E NGLISH CONTRAST This adjusts the contrast of the picture. (Adjust the “ BRIGHT ” setting first if required before adjusting the “ CONTRAST ” setting.) The picture is bright: I button The picture is dark: H button BRIGHT This adjusts the darker areas (black areas) in the picture.
E NGLISH -39 Adjustments and settings NOTE: B “ AI ” is disabled when “ LAMP POWER ” is set to “ LOW ” . (Refer to page 47.) NOTE: B “ W-BAL ” is disabled when “ MODE ” in “ DAYLIGHTVIEW ” is set to “ OFF ” . NOTE: B “ AUTO ” may not function correctly if any objects are placed on the projector.
40-E NGLISH SIGNAL MODE (RGB/YP B P R /NETWORK only) This displays the type of signal which is currently being projected. Refer to the list on page 62 for details on each type of signal. sRGB is an international colour reproduction standard (IEC61966-2- 1) established by the International Electrotechnical Commission (IEC).
E NGLISH -41 Adjustments and settings Press the F or G button on the projector or remote control unit to select an item, and then press the I or H button to change the setting. For items with bar scales, press the ENTER button or the I or H button to display the adjustment screen, and then press the I or H button to make the adjustment.
42-E NGLISH S4:3 The size of the input signal is compressed to 75% and projected. (This is useful for projecting a picture with a 4:3 aspect ratio onto a 16:9 screen.) AUTO (S-VIDEO only) When an S1 video signal is being input, the aspect ratio is changed automatically to project a 16:9 picture.
RESIZING This should normally be set to “ ON ” . (This setting is only for signals which have lower resolutions than the LCD panels. Refer to page 62 for details.) ON The pixel resolution of the input signal is converted to the same resolution as the LCD panels before being projected.
44-E NGLISH Changing the displa y langua ge Press the F or G button on the projector or remote control unit to select a language, then press the ENTER button to accept the setting.
E NGLISH -45 Adjustments and settings Option settings Press the F or G button on the projector or remote control unit to select an item, then press the I or H button to change the setting.
46-E NGLISH RGB2 SELECT This setting is used to select the function of the RGB2 IN/1 OUT connector. RGB/YP B P R This should normally be set to “AUTO”.
E NGLISH -47 Adjustments and settings DESK/CEILING This setting should be changed in accordance with the projector setting-up method. (Refer to page 18.) DESK When the projector is placed on a desk or similar. CEILING When the projector is suspended from a ceiling using the ceiling bracket (sold separately).
48-E NGLISH CONTR OL KEY To disable the buttons on the projector, set “CONTROL KEY” to “OFF”. A confirmation screen will then be displayed. Select “OK” by using I or H button. To use the buttons on the projector, set to “ON” by using the remote control unit.
E NGLISH -49 Adjustments and settings Setting up the security function This projector is equipped with a security function. A password input screen can be displayed, or a company URL can be set up and displayed at the bottom of the projected image.
50-E NGLISH TEXT DISPLA Y You can set text to be displayed at the bottom of the projected image at all times. ON “TEXT DISPLAY” is enabled. OFF “TEXT DISPLAY” is disabled. TEXT CHANGE The text which is displayed when “TEXT DISPLAY” is set to “ON” can be changed.
E NGLISH -51 Netw ork setup (PT-LB20NTE only) You need to make adjustments on some items when controlling the projector with a personal computer by means of the wireless network.
52-E NGLISH When the TEMP indicator and the LAMP indicator are illuminated There are two indicators on the control panel of the projector which give information about the operating condition of the projector.
E NGLISH -53 Care and maintenance Remedy Problem Indicator display Flashing (red) It is nearly time to replace the lamp unit. Illuminated (red) An abnormality has been detected in the lamp circuit.
54-E NGLISH Cleaning and replacing the air filter If the air filter becomes clogged with dust, the internal temperature of the projector will rise, the TEMP indicator will illuminate and the projector’s power will turn off (the TEMP indicator will flash after the power is turned off).
E NGLISH -55 Care and maintenance Replacing the lamp unit W arning When replacing the lamp, allow it to cool for at least one hour before handling it. B The lamp cover gets very hot, and touching it can cause burns.
B A 56-E NGLISH Lamp unit replacement procedure # Disconnect the mains lead from the projector by following the procedure on page 26, and check that the area around the lamp unit has cooled down. $ Use a Phillips screwdriver to turn the lamp unit cover fixing screws at the bottom of the projector, and then remove the lamp unit cover.
' Install the lamp unit cover, and then use a Phillips screwdriver to securely tighten the lamp unit cover fixing screws. ( Connect the mains lead. ) Press the POWER button so that a picture is projected onto the screen. * Press the MENU button to display the “MAIN MENU”, and then press the F or G button to select “OPTION”.
58-E NGLISH Bef ore calling f or service Before calling for service, check the following points. Problem Possible cause Page Power does not turn on. No picture appears. The picture is fuzzy. The colour is pale or grayish. No sound can be heard. The remote control unit does not operate.
E NGLISH -59 Care and maintenance The picture does not display correctly. Picture from computer does not appear. Problem Possible cause B The signal format (“TV-SYSTEM”) may not be set correctly. B There may be a problem with the video tape or other signal source.
60-E NGLISH Specifications Power supply: 100 V - 240 V ~, 50 Hz/60 Hz Power consumption: 220 W [During standby (when fan is stopped): Approx. 4 W] Amps: 2.5 A - 1.3 A LCD panel: Panel size (diagonal): PT-LB20NTE/PT-LB20E/PT-LB20SE: 0.7 type (17.78 mm) PT-LB20VE: 0.
E NGLISH -61 Others Connectors RGB IN/OUT: Dual line, D-sub HD 15-pin (female) (One line is available for input and output, selectable using an on-screen menu) During YP B P R input/output: Y: 1.0 V [p-p] (Including sync), 75 Ω P B , P R : 0.7 V [p-p], 75 Ω During RGB input/output: R.
62-E NGLISH Appendix *1 The “i” appearing after the resolution indicates an interlaced signal. *2 The following symbols are used to indicate picture quality. AA Maximum picture quality can be obtained. A Signals are converted by the image processing circuit before picture is projected.
Others Pr ojection dimensions calculation methods If the screen size (diagonal) is SD (m), then the following formula is used to calculate the projection distance for the wide lens position (LW) and the projection distance for the telephoto lens position (LT).
64-E NGLISH Using the SERIAL connector The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connector.
E NGLISH -65 Others Control commands The commands which the personal computer can use to control the projector are shown in the following table. Command Control Contents Remarks In standby mode, all commands other than the PON command are ignored. B The PON command is ignored during lamp ON control.
66-E NGLISH These Operating Instructions are printed on recycled paper. T rademark ac knowledgements B VGA and XGA are trademarks of International Business Machines Corporation. B Macintosh is a registered trademark of Apple Computer, Inc. B S-VGA is a registered trademark of the Video Electronics Standards Association.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic PT-LB20VE (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic PT-LB20VE noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic PT-LB20VE - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic PT-LB20VE reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic PT-LB20VE erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic PT-LB20VE besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic PT-LB20VE verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic PT-LB20VE. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic PT-LB20VE gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
