Benutzeranleitung / Produktwartung PT-AE2000U des Produzenten Panasonic
Zur Seite of 58
E NGLISH Operating Instructions LCD Projector Model No. PT-AE2000U Before operating this product, please read th e instruct ions carefully and sa ve th is manual for future use.
Important Information 2 - E NGLISH Important Safety Notice Dear Panasonic Customer: The following information should be read and unde rstood as it provides details, which will enable you to operate the projector in a man ner which is both safe to you and your environment, and conforms to legal r equirements regarding the use of projectors.
Important Information Important Safety Notice E NGLISH - 3 Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this pr oduct, please conta ct yo ur local authorities or deale r and ask for the corr ect method of disposal.
4 - E NGLISH Contents J Quick steps Important Information Important Safety Notice . ............. ............. ............. 2 Precautions with regard to safety ................... .... 6 WARNINGS .............. ............ ........... ........... .
Preparation Getting Started Basic Operation Settings Maintenance Appendix E NGLISH - 5 Contents Important Infomation Settings Menu Navigation ...................... ................ ............ 28 Main menu and sub-menu ....... .............. .......
Important Information 6 - E NGLISH Precautions with regard to safety If you notice smoke, stra nge smells or noise co ming from the projector, disconnect t he power plug from the wall out let. Do not continue to use the projector in such cases, otherwise fire or electric shocks could res ult.
Precautions with regard to safety E NGLISH - 7 Important Information Do not use the projector in a bath or s hower. Fire or electric shocks can re sult. Do not place your skin into the light beam wh ile the projector is being used. S trong light is emitted from the projector’s lens.
Precautions with regard to safety 8 - E NGLISH Important Information Do not cover the ai r inlet port or the ai r outlet por t. Doing so may cause the proj ector to overheat, which can cause fire or da mage to the project or . Do not place th e projector in narrow , ba dly ventilated places such as closet s or bookshelves.
Precautions with regard to safety E NGLISH - 9 Important Information Ask an Authorized Service Cen ter to clean inside t he projector at least once a year. If dust is left to bui ld up inside the projector without being cleaned out, it can result in fire or p roblems with operation.
Precautions with regard to safety 10 - E NGLISH Important Information In order to get the best picture qu ality Draw curtains or blin ds over an y windows and turn off any lights near the screen to pre vent outside light or light from indoor lamps fr om shining onto the screen.
E NGLISH - 11 Preparation About Your Projector Remote control NOTE: • Do not drop the remote control. • Avoid contact with liquids or moisture. • Use manganese batteries or alkaline batteries with the remote control. • Do not attempt to modify or disassemble the remote co ntrol.
Preparation About Your Projector 12 - E NGLISH J T op and front view Projector body NOTE: • Do not cover the ventilation openin gs or place anything within 50 cm (20") of th em as this may cause damage or injury . • While the proj ector is not in use , keep the lens cove r to protect the lens.
Preparation About Your Projector E NGLISH - 13 J Back and bottom view NOTE: • Do not cover the ven tilation openings or place anything within 50 cm (20") of them as this may cause damage or injury . • The projector should only be used with the a ttached power cord to ensure optimum performance and avoi d damage to the projector .
Getting Started 14 - E NGLISH Setting up You can adjust the projection size with 2.0x zoom lens . Calculate and de fine the throw distance as follows. * All measurements above are app roximate and may differ slightly from the actual measurements.
Getting Started Setting up E NGLISH - 15 You can use the pr ojector with any of the following 4 proje cti on methods. To set the desired method i n the projector, See “INSTALLATION” on page 41. You can screw up/down the fron t leg adjusters to control the a ngle of the pro jector for ad justing the throwing a ngle.
Getting Started Setting up 16 - E NGLISH If the projector is not positio ned right in front of the cent er of the screen, you can adju st the pr ojected image position by moving t he lens shift dials within th e shift range of the lens .
Getting Started Setting up E NGLISH - 17 J Projector location range Y ou can determine wh ere to locate the s creen and the projector by considering the lens s hift possibilities.
Getting Started 18 - E NGLISH Connections Read and follow the operating and con necting instructions o f each peripher al device. The peripher al devices must be turned off. Use cables that match each peripheral de vice to be connected. Confirm the type of video signals.
E NGLISH - 19 Basic Operation Switching the projector on/off J Connecting 1. Make sure the shape of the power plug and th e AC IN connector on the back of the projector match, then push the plug all the way in. 2. Connect the power cord to a wall outlet.
Basic Operation Switching the projector on/off 20 - E NGLISH 1. Switch the MA IN POWER button on. The power indicator li ghts up in red. 2. Remove the lens cover from the lens. 3. Press the POWER button. The power indicator lights up in green after flashing for a while.
E NGLISH - 21 Basic Operation Projecting an image 1. Switch on the connected devices. Press the play button of the required device. 2. Press the INPUT button to se lect the requir ed input method if needed. See “Switching the input signal” on pag e 23.
22 - E NGLISH Basic Operation Remote control operation You can operate th e projector with the remote control within the remote range 7 m (22'11"). Q Facing to the projector Ensure the remote control emitter is facing to the remote control signal receptor on front/back of the projector an d press th e required bu ttons to operate.
Basic Operation Remote control operation E NGLISH - 23 You can switch the input method manually by pressing the INPUT button. Press the button several times or press I H to cycle through the input methods as follows . The actual projected image will be changed in a while.
Basic Operation Remote control operation 24 - E NGLISH You can display the image brightne ss and contrast level of the input signal with a waveform. See “WAV EFORM MONITOR” on page 32. J Displaying the waveform 1. Press the WAVEFORM button and display the waveform monitor .
Basic Operation Remote control operation E NGLISH - 25 Q Adjusting with RGB options 1. Press the ENTER button until the require d option is displayed. 2. Press the PIC. ADJUST twice to display the GAMMA of the ADVANCED MENU men u. 3. Press G several times to di splay th e required brightness option.
Basic Operation Remote control operation 26 - E NGLISH You can adjust a se lected color individ ually and save and retrieve un der the PICTURE MODE setting. Press the COLOR M. button to open the menu. J Create a new profile Q Adjusting the selected color Select a color and adjust COLOR , TINT and BRIGHTNESS .
Basic Operation Remote control operation E NGLISH - 27 Q Saving a log sett ing as a profile Return to the COLOR MANAGEME NT menu and save the stored log as a profile. Make sure that the PICTURE MODE is not switched. 1. Select the PROFILE SAVE menu and pr ess ENTER The PROFILE SAVE menu is displayed.
28 - E NGLISH Settings Menu Navigation The menu system allows you to acce ss functions which do not have their own dedicated buttons on the remote control. The menu options are str uctured and cat egorized. You can navigate th rough the menu with F G H I buttons.
Menu Navigation E NGLISH - 29 Settings Main menu Sub-menu Options (Underlined is def ault setting) Page POSITION H-POSITION • Default: 0 page 36 V-POSITION • Default: 0 page 36 DOT CLOCK *1 *1. COMPUTER signals only • Default: 0 page 36 CLOCK PHASE *2 *2.
Settings Menu Navigation 30 - E NGLISH J Displaying the main menu Press the MENU button to display the main menu and the operating guid ance. J Adjusting with the bar scale items The triangle mark under the bar indicates facto ry default setting and the square indicates th e current setting.
E NGLISH - 31 Settings PICTURE menu Depending on the projection environmen t, you can use these preset parameter settings to op timize image projection. Press I H to cycle through the options. You can adjust the contr ast of the projected imag e. Adjust the BRIGHTNESS in advance if necessary.
Settings PICTURE menu 32 - E NGLISH You can adjust the white balance o f the projected image. Setting range: -6 to +6 You can switch automatic adjustment of the lamp and the lens iris on/off.
PICTURE menu E NGLISH - 33 Settings Q Adjusting the image in a split window 1. Select AREA SELECT and press the ENTER button. The image will b e frozen a nd the area cursor wil l be displayed. 2. Press I H to move the area cu rsor to select the required area an d press the ENTER button .
Settings PICTURE menu 34 - E NGLISH J COLOR MANAGEMENT Y ou can manage yo ur own defined color se ttings. See “Setting your own color profile” on p age 26. J xvYCC Y ou can switch on/of f the automatic adjustment system for signals which complied with xvYC C.
PICTURE menu E NGLISH - 35 Settings You can edit the named memory settings. Q Deleting a memory setting 1. Select MEMORY DEL and press the ENTER button. 2. Select the required memo ry setting and press the ENTER button. If you select ALL DELETE , you can delete all of the saved memory settings.
36 - E NGLISH Settings POSITION menu You can move the projected imag e horizontally for fine adjustment. You can move the projected imag e vertically for fine adjustment. If you have in terference patterns of the projecte d image, which is sometimes referred to as moire or noise, you can minimize it by pressing I H to adjust the clock frequency.
POSITION menu E NGLISH - 37 Settings J Aspect ratio options an d projection example If you apply the aspect ratio options to the projected image, the resu lt will be as follows. The result may differ due to the input signals. See “Switchin g the aspect ratio” on pa ge 23.
Settings POSITION menu 38 - E NGLISH WSS (Wide Screen Signalling) detects if a PAL / 625p (576p)/625 i (576i) signal is input and that signal has an identification signal, and switch the aspe ct ratio to required settin g automatically. You can switch the system off manually.
E NGLISH - 39 Settings LENS CONTROL You can use the 2 different test patterns to adjust the focus and zoom of the image. See “L ens shift and positioning” on page 1 6. 1. Press ENTER to display test pattern 1. Press F G to adjust the focus and I H to adjust the zoom.
40 - E NGLISH Settings OPTION menu When you change the input method, th e guidance appears in the upper right co rner of the screen. The following display methods are availa ble. Press I H to cycle through the options. You can change the backg round color of the menu.
OPTION menu E NGLISH - 41 Settings When installin g the project or, select th e projecti on method acco rding to th e projector position. Pre ss I H to cycle thro ugh the option s. See “Projectio n method” on page 15. You can select the requir ed duration of time and set th e off timer to turn off the powe r of the projector automatically.
42 - E NGLISH Maintenance TEMP and LAMP Indicators If a problem shou ld occur with the projector , the LAMP and/or TEMP indicators will inform you. Manage the indicated problems as follow. 1. Confirm the st atus of all indicators and projector , and switch off the projector in prop er way .
E NGLISH - 43 Maintenance Care and Replacement J Before cleaning the pro jector Switch off the MAIN POWER switch in proper way and disconnect the power plug from the wall outlet. Unplug all the cables from the projector . J Cleaning the outer sur face of the projector Wipe off dirt and dust gently with a sof t cloth.
Maintenance Care and Replacement 44 - E NGLISH J Before replacing the lamp unit Switch off the MAIN POWER button in proper wa y and disconnect the power plug from the wall ou tlet. Make sure the lamp unit and the surroundings are cooled enoug h. Unplug all th e cables from the projector.
Care and Replacement E NGLISH - 45 Maintenance J Removing and replacing the lamp unit 1. Use a Phillips screw driver to l oosen the 3 lamp unit fixing screws until the screws turn freely . 2. Hold the handle of the lamp unit and release the lamp unit lock.
46 - E NGLISH Maintenance Troubleshooting Should any problem pers ist, contac t your deale r. Problem Cause Reference pa g e Power does not turn on. The power cord may not be connected. The MAIN POWER switch is turned o ff. No electric supply is at the wall outlet.
E NGLISH - 47 Appendix Technical Information List of comp atible signals Mode Displa y Display resolution (dot s) *1 *1. The “i” appearing after the re solution indicates an interlaced signal. Scanning frequency Dot c lock frequency (MHz) Picture quality *2 *2.
Appendix Technical Information 48 - E NGLISH The serial connector which is on the connecto r panel of the projector conforms to the RS-232C inter face specification, so that the projector ca n be controlled by a persona l computer which is connected to th is connecter.
Technical Information E NGLISH - 49 Appendix J Communication settings J Control commands Signal level RS-232C Char acter length 8 bits Sync. method Asynchronous Stop bit 1 bit Baud rate 9 600 bps X p .
Appendix Technical Information 50 - E NGLISH J Inquiry commands Command Control cont ent s Parameter QPW Power status 00 0 = OFF 001 = ON QFZ FREEZE status 0 = OFF 1 = ON QIN INPUT signal status CP1 =.
Technical Information E NGLISH - 51 Appendix The projector and the ceiling mount bracke t are designed sufficiently safety though, make sure the safety cable provided with the projector is insta lled and attached to the bottom of the projector when mounting in the ceiling for safety and security.
Appendix Technical Information 52 - E NGLISH S pecifications Power supply AC 100 - 240 V 50 Hz/60 Hz Power consumption 240 W During standby (when fan is stopped ): 0.
Technical Information E NGLISH - 53 Appendix T erminals S-VIDEO IN Single - line, Mini DIN 4p Y: 1.0 V [p-p], C: 0.286 V [p-p], 75 Ω VIDEO IN Single - line, RCA pi n jack1. 0 V [p-p], 75 Ω COMPUTER IN Single - line, D - sub HD 15-pin (female) Selectable for input and output by men u operation.
Appendix Technical Information 54 - E NGLISH Dimensions 300 (1 1-23/32) 460 (18 -3/32) 230 (9 -1/32) 15 (19/6) 147 (5 -25/32) 60 (2 -5/16) 11 6 (4 -9/16) 130 17 (-21/32) Unit: mm.
Technical Information E NGLISH - 55 Appendix VGA and XGA are trad emarks of Int ernational B usiness Machin es Corporation . S-VGA is a regi stered trademark of the V ideo Electronics S tandards Association. HDMI, the HDMI logo and High- Definition Multimedia Interface ar e trademarks or registered trademar ks of HDMI Licensing LLC.
56 - E NGLISH Appendix Index A AC IN ................ ................ ............. ................ ......... 13 Accessories ........... ................ ................. ................ .. 10 ADVANCED MENU ................ ............. .........
Appendix Index E NGLISH - 57 M MAIN POWER .............. ............ ................. ............... 12 MEM.LOAD Remote control button ................ ................ .........11 Remote control function .............. ................ .........23 MEMORY EDIT .
NOTE: This product contains a CR Coin Cell Lithium Battery which contains Perch lorate Materi al - special handling may apply. See www.dtsc.ca.gov/hazar douswaste /perchlorate.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic PT-AE2000U (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic PT-AE2000U noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic PT-AE2000U - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic PT-AE2000U reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic PT-AE2000U erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic PT-AE2000U besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic PT-AE2000U verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic PT-AE2000U. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic PT-AE2000U gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
