Benutzeranleitung / Produktwartung KX-T206E des Produzenten Panasonic
Zur Seite of 40
Electronic Modular Switching System MODEL KX-T206E Please read this manual before connecting the Electronic Modular Switching System. E L E C T R O N I C M O D U L A R S W I T C H I N G S YS TE M P O .
Thank you for purchasing the Panasonic Model KX-T206E, Electronic Modular Switching System. Description Electronic Modular Switching System Proprietary telephone with display Proprietary telephone Proprietary telephone DISA/F AX Detect Card Doorphone Model No.
3 FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULL Y . This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5 amps and that it is approved by AST A or BSI to BS1362.
4 Important Information This equipment should be used on PSTN lines requiring 2-wire Loop calling unguarded clearing with Loop Disconnect or DTMF address signalling. The equipment must be connected to direct extension lines and a payphone should not be connected as an extension.
5 Pr ecaution • Keep the unit away from heating appliances and electrical noise generating devices such as fluorescent lamps, motors and television. These noise sources can interfere with the perform- ance of the Electronic Modular Switching System.
6 Specifications ....................................................................................................................... 7 Before Installation ............................................................................................
7 Specifications General Descriptions 1. Capacity .................................... CO line 2 Extension 6 2. Control Method ......................... Stored Program CPU: 8 bits CPU Control ROM: 64 KB, Control RAM: 8 KB 3. Switching Method .........
8 Befor e Installation Please read the following notes concerning installation and connection before installing the system. Safety Installation Instructions When installing telephone wiring, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1.
9 Unpacking • Main Unit ............................. one • AC Cord ............................... one • Screw and W asher ................ three • 4-pin Plug .
10 1. Loosen the screw . 2. Slide the cover in the direction of the arrow while pressing the marked position. Opening Fr ont Cover Frame Gr ound Connection To Earth P O W E R E L E C T R O N I C M O D U L A R S W I T C H I N G S Y S T E M IMPOR T ANT!!! Connect the frame of the main unit to earth.
11 System Connection Diagram P a n a s o n i c Panasonic A U T O S C A N AUTO SCAN 1 0 C H 10CH P a n a s o n i c Panasonic P a n a so nic Panasonic E L E C T R O N I C M O D U L A R S W I T C H I NG .
12 CO Line Connection W ire Specification The wire specifications are as follows: W ire Solid wire Diameter of conductor ø 0.4 – ø 0.65mm Diameter with coating ø 0.66 – ø 1.05mm Connection Use a 4-pin plug (included) to connect CO lines. A single plug is able to connect two CO lines.
13 Extension Connection W ire Specification The wire specifications are as follows: W ire Solid wire Diameter of conductor ø 0.4 – ø 0.65 mm Diameter with coating ø 0.66 – ø 1.05 mm Connection Use a 4-pin plug (included) to connect extension lines.
14 Any single line telephone can be connected in parallel with a proprietary telephone. E L E C T R O N I C M O D U L A R S W I T C H I N G S YS TE M P O W E R Paralleled T elephone Connection Notes .
15 Installation of Optional Card and Unit Doorphone (KX-T30865) Connection 2-conductor wiring cord KX-T30865 Notes • The doorphone adaptor is not required for KX-T206. • T o avoid howling, you must assign all extensions as “ DISABLE ” in the “ #06/#76 Doorphone Assignment (Day/Night) ” program when you do not connect a doorphone.
16 DISA Card (KX-T20691) Connection 1. Disconnect the AC cord from the system. 2. Loosen the screws and remove the cover . 3. Attach the DISA card to the marked connectors. 4. Replace the cover and secure the screws. 5. Connect the AC cord again. C O 2 C O 1 DO OR PHO N E G ROUN D E X T N .
17 Installation of Lightning Pr otectors Overview A lightning protector is a device to be installed on a CO line to prevent a dangerous surge from entering the building and damaging equipment. A dangerous surge can occur if a telephone line comes in contact with a power line.
18 Installation of an Earth Rod Notice If you install an extension outside of the main building, the following precautions are recom- mended: (1) Install the extension wire underground. (2) Use a conduit to protect the wire. Note • The lightning protector for an extension is different from that for CO.
19 Power Failure T ransfer In the event of a power failure, CO2 is connected to extension 22 automatically . Note • The system programmed data is protected by the factory provided lithium battery . Starting the System Plug the AC power cord into the system and an AC outlet.
20 General Pr ogramming Instructions Default Setting This system has a default factory setting. If any of the program- ming needs to be changed, you can change the setting by system programming.
21 System Pr ogramming 0 1 [A] [B] 0 2 2 (for day) / (for night) [A] [B] 7 System Speed Dialling Number Set Description Used to program System Speed Dial numbers. These numbers are available to all exten- sion users. There are 40 numbers from 00 through 39.
22 System Pr ogramming 0 (for day) / (for night) [A] [B] 5 7 5 0 (for day) / (for night) [A] [B] 3 3 7 Outgoing Permitted CO2 Assignment (Day/Night) Description Determines the extensions which can have access to CO line 2 in both day and night modes. The extension users can make outgoing CO calls if their extensions are assigned as “ENABLE”.
23 System Pr ogramming Class CLASS 1 CLASS 2 CLASS 3 CLASS 4 Restricted calls None Numbers programmed in “#08 Denied code (Class 2, 3) ” Numbers programmed in “#08 Denied code (Class 2, 3) and .
24 System Pr ogramming 1 0 (Record your message) 9 0 [A] [Denied code No.] TRS Denied Code (CLASS 2, 3) Description Allows you to specify the numbers which are toll-restricted for TRS Class 2 and Class 3. Condition • The character “ ” can be any number .
25 System Pr ogramming 1 2 [A] 1 3 [A] [B] OGM Play Description Confirms the outgoing message recorded in the OGM Recording program. Condition • If you perform programming with a PT , the message “PLA YBACK” will be displayed on its panel. Input Format Fax Connection Description Allows the system to detect the CNG tone from a facsimile.
26 System Pr ogramming 4 1 [A] [B] 1 [A] 5 CO2 Delayed Ringing Assignment Description Assigns delayed ringing to extensions when a call from CO line 2 is received. Condition • The number of delayed rings is assigned by the “#15 Delayed Ringing Count Selection” program.
27 System Pr ogramming 7 [A] [BB] [CC] [D] 1 9 9 7 [A] 0 [A] [B] 1 6 Door Opener Assignment Description Assigns each extension to have access to door opener or not.
28 System Pr ogramming Other Programs • Host PBX Access Code Assignment Assigns a Host PBX access code to make an outside call, if the system is installed behind the host PBX. A pause is automatically inserted after the access code and the toll restriction feature applies to the number after the code.
29 System Pr ogramming • Hookswitch Flash Time Range Assignment Sets the hookswitch flash time range. Input Format : #65 [A] • [A]=1: 80–1000ms / 2: 80–150ms 3: 50–150ms (default) • Door Opener Access Time Assigns the length of the Door Opener time.
30 System Pr ogramming Least Cost Routing (LCR) Programs Least Cost Routing (LCR) is a system programmable feature that automatically selects the least expensive route available at the time a long distance call is made. It is not necessary to dial the access code of the least expensive carrier .
31 System Pr ogramming • LCR Itemized Bill Code Assigns whether to register the itemized bill code (extension number 21 through 26) to each CO line or not.
T one / Ring T one 32 <T one> 1 sec 15 sec Confirmation T one 1 Confirmation T one 2 Confirmation T one 3 (Conference T one) Dial T one 1 Dial T one 2 Busy T one Reorder T one Ringback T one Do .
T one / Ring T one 33 <Ring T one> 1 sec Intercom Calls / Intercom Hold Recall CO Calls / CO Hold Recall Doorphone Calls NOTE • The dial tone 2 is heard during the system programming mode and .
Pr ogramming T ables 34 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [#00] System Speed Dialling Number Set No.
Pr ogramming T ables 35 Code 00 01 02 03 04 [#01] Dial T ype Selection Default Ext.21 Ext.22 Ext.23 Ext.24 Ext.25 Ext.26 [#03] Outgoing Permitted CO 2 Assignment (Day) [#04] CO 1 Ringing Assignment (Day) 0: DISABLE 1: ENABLE Default Ext.21 Default Ext.
Pr ogramming T ables 36 No. 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 No. 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [#83] LCR Route Selection Code Code (6 digits max.
Pr ogramming T ables 37 [#88] LCR Route Exceptional Code No. 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 No. 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 Code (6 digits max.) Route 1 Code (6 digits max.) Route 2 No. 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 No.
.
T emplet 39 39 106 mm Install a screw here Install a screw here 71 mm 77 mm Install a screw here • Copy the templet and place it on the wall. Up.
Panasonic Business Systems U.K. Panasonic House, W illoughby Road, Bracknell, Berkshire RG12 4FP Printed in Japan PSQX1 141ZB KW0397KM1097.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic KX-T206E (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic KX-T206E noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic KX-T206E - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic KX-T206E reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic KX-T206E erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic KX-T206E besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic KX-T206E verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic KX-T206E. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic KX-T206E gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
