Benutzeranleitung / Produktwartung P5K-E/WiFi-AP des Produzenten Asus
Zur Seite of 172
Motherboard P5K-E/WiFi-AP.
ii E3216 First Edition V1 April 2007 Copyright © 2007 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, trans.
iii Contents Notices ........................................................................................................ vii Safety information .................................................................................... viii About this guide .
iv Contents 2.5.7 AI Slot Detector ............................................................. 2-21 2.6 Jumper ........................................................................................ 2-22 2.7 Connectors .............................
v Contents 4.3.8 System Information ....................................................... 4-15 4.4 Advanced menu ......................................................................... 4-16 4.4.1 JumperFree Conguration .........................
vi Contents 5.3.2 AI NET2 ......................................................................... 5-1 1 5.3.3 ASUS PC Probe II ......................................................... 5-12 5.3.4 ASUS AI Suite .......................................
vii Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
viii Safety information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
ix About this guide This user guide contains the information you need when installing and conguring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports.
x Conventions used in this guide T o make sure that you perform certain tasks properly , take note of the following symbols used throughout this manual. T ypography Bold text Indicates a menu or an item to select. Italics Used to emphasize a word or a phrase.
xi P5K-E specications summary CPU LGA775 socket for Intel ® Core™2 Quad / Core™2 Extreme / Core™2 Duo / Pentium ® Extreme / Pentium ® D / Pentium ® 4 Processors Supports FSB 800MHz and above only Compatible with Intel ® 05B/05A/06 processors Intel ® Hyper-Threading T echnology ready * Refer to www .
xii P5K-E specications summary IEEE 1394 Agere ® FW322 1394a controller supports 2 x IEEE 1394a ports (one at midboard; one at back panel) USB 10 x USB 2.
xiii P5K-E specications summary Back Panel I/O Ports 1 x PS/2 Keyboard 1 x S/PDIF Out (Coaxial + Optical) 2 x External SA T A 1 x IEEE1394a 1 x RJ45 port 6 x USB 2.
xiv.
1 Product introduction This chapter describes the motherboard features and the new technologies it supports..
ASUS P5K-E Chapter summary 1 1.1 Welcome! ...................................................................................... 1-1 1.2 Package contents ......................................................................... 1-1 1.3 Special features .
ASUS P5K-E 1-1 1.1 Welcome! Thank you for buying an ASUS ® P5K-E motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of A.
1-2 Chapter 1: Product Introduction 1.3 Special features 1.3.1 Product highlights Green ASUS This motherboard and its packaging comply with the European Union’s Restriction on the use of Hazardous Substances (RoHS).
ASUS P5K-E 1-3 Native DDR2 1066 memory support T o attain top performance, ASUS engineers have successfully unleashed the true potential of DDR2 memory . While in DDR2 1066 mode, ASUS’s exclusive technology offers a choice of FSB 1333, providing great performance for 3D graphics and other memory demanding applications.
1-4 Chapter 1: Product Introduction High Denition Audio Enjoy high-end sound quality on your PC! The onboard 8-channel HD audio (High Denition Audio, previously codenamed Azalia) CODEC enables high-quality 192KHz/24-bit audio output that simultaneously sends different audio streams to different destinations.
ASUS P5K-E 1-5 8-Phase Power Design The ASUS 8-Phase Power Design provides highly efcient operation to generate less heat (at least 15°C (59°F)) than other conventional power solutions. It reduces input ripple current and output ripple voltage, which keeps CPU and power module from suffering the risk of high power stress.
1-6 Chapter 1: Product Introduction ASUS Crystal Sound This feature can enhance speech-centric applications like Skype, online game, video conference and recording.
ASUS P5K-E 1-7 Smart Support CD It provides a checklist to allow the user to see which drivers are already installed, as well as those that aren’t. When using ASUS PC Probe II, you can easily see the critical parts of the computer .
1-8 Chapter 1: Product Introduction Precision T weaker This feature allows you to ne tune the CPU/memory voltage and gradually increase the memory Front Side Bus (FSB) and PCI Express frequency at 1MHz increment to achieve maximum system performance.
2 Hardware information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard.
ASUS P5K-E Chapter summary 2 2.1 Before you proceed ..................................................................... 2-1 2.2 Motherboard overview ................................................................. 2-2 2.3 Central Processing Unit (CPU) .
ASUS P5K-E 2-1 Onboard LED The motherboard comes with a standby power LED. The green LED lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component.
2-2 Chapter 2: Hardware information P5K-E ® 2.2 Motherboard overview Before you install the motherboard, study the conguration of your chassis to ensure that the motherboard ts into it. Make sure to unplug the power cord before installing or removing the motherboard.
ASUS P5K-E 2-3 2.2.3 Motherboard layout P ANEL P5K-E ® AAFP CHASSIS 24.5cm (9.6in) 30.5cm (12.0in) CPU_FAN DDR2 DIMM_A1 (64 bit,240-pin module) CHA_FAN4 FLOPPY Super I/O agere L-FW3227-100 CD PCIEX1_.
2-4 Chapter 2: Hardware information 2.2.4 Layout contents Slots Page 1. DDR2 DIMM slots 2-13 2. PCI slots 2-20 3. PCI Express x 1 slots 2-20 4. PCI Express x16 slots 2-20 Jumper Page 1. Clear RTC RAM (3-pin CLR TC) 2-22 Rear panel connectors Page 1. PS/2 keyboard port (purple) 2-23 2.
ASUS P5K-E 2-5 Internal connectors Page 1. Floppy disk drive connector (34-1 pin FLOPPY) 2-26 2. IDE connector (40-1 pin PRI_EIDE)) 2-26 3. ICH9R Serial A T A connectors (7-pin SA T A1 [red], SA T A2 [red], SA T A3 [black], SA T A4 [black], SA T A5 [red], SA T A6 [red]) 2-27 4.
2-6 Chapter 2: Hardware information 2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA775 socket designed for the Intel ® Core™2 Quad/ Core™2/ Pentium ® D/ Pentium ® 4/ Pentium ® Extreme processors.
ASUS P5K-E 2-7 3. Lift the load lever in the direction of the arrow to a 135º angle. 2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. Retention tab Load lever This side of the socket box should face you.
2-8 Chapter 2: Hardware information 5. Position the CPU over the socket, making sure that the gold triangle is on the bottom-left corner of the socket then t the socket alignment key into the CPU notch. Alignment key Gold triangle mark 6. Close the load plate (A), then push the load lever (B) until it snaps into the retention tab.
ASUS P5K-E 2-9 Fastener Motherboard hole 2.3.2 Installing the CPU heatsink and fan The Intel ® LGA775 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. T o install the CPU heatsink and fan: 1.
2-10 Chapter 2: Hardware information 3. Connect the CPU fan cable to the connector on the motherboard labeled CPU_F AN. 2. Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place.
ASUS P5K-E 2-1 1 2.3.3 Uninstalling the CPU heatsink and fan T o uninstall the CPU heatsink and fan: 1. Disconnect the CPU fan cable from the connector on the motherboard. 2. Rotate each fastener counterclockwise. 3. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembl y from the motherboard.
2-12 Chapter 2: Hardware information 5. Rotate each fastener clockwise to ensure correct orientation when reinstalling. Narrow end of the groove Refer to the documentation in the boxed or stand-alone CPU fan package for detailed information on CPU fan installation.
ASUS P5K-E 2-13 2.4 System memory 2.4.1 Overview The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. A DDR2 module has the same physical dimensions as a DDR DIMM but has a 240-pin footprint compared to the 184-pin DDR DIMM.
2-14 Chapter 2: Hardware information • If you install four 1 GB memory modules, the system may detect less than 3 GB of total memory because of address space allocation for other critical functions.
ASUS P5K-E 2-15 P5K-E Motherboard Qualied V endors Lists (QVL) DDR2-800MHz capability Size V endor Chip No. CL Chip Brand SS/ DS Part No. DIMM support A* B* C* 512MB KINGSTON K4T51083QC 5 SEC SS KV.
2-16 Chapter 2: Hardware information P5K-E Motherboard Qualied V endors Lists (QVL) DDR2-667MHz capability SS - Single-sided DS - Double-sided DIMM support: A - Supports one module inserted into either slot, in Single-channel memory conguration.
ASUS P5K-E 2-17 2.4.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. T o install a DIMM: 1. Unlo ck a DIM M so cket by pres sing the retaining clips outward.
2-18 Chapter 2: Hardware information 2.5 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. 2.5.1 Installing an expansion card T o install an expansion card: 1.
ASUS P5K-E 2-19 2.5.3 Interrupt assignments Standard interrupt assignments IRQ Priority Standard Function 0 1 System T imer 1 2 Keyboard Controller 2 — Re-direct to IRQ#9 3 9 IRQ holder for PCI stee.
2-20 Chapter 2: Hardware information 2.5.4 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specications.
ASUS P5K-E 2-21 2.5.7 AI Slot Detector This motherboard comes with on- board LEDs that light up when the PCIE/PCI devices are not correctly installed. This is a reminder that you should reinstall these devices. Refer to the gure on the right for the location of the LEDs.
2-22 Chapter 2: Hardware information 2.6 Jumper 1. Clear RTC RAM (CLRTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and s ystem setup parameters by erasing the CMOS RTC RAM data.
ASUS P5K-E 2-23 2.7 Connectors 2.7.1 Rear panel connectors 2 1 4 5 14 1 1 12 7 8 6 16 3 15 17 9 10 13 1. PS/2 keyboard port (purple). This port is for a PS/2 keyboard. 2. Coaxial S/PDIF Out port. This port connects an external audio output device via a coaxial S/PDIF cable.
2-24 Chapter 2: Hardware information For WiFi-AP Edition Only: Refer to the WiFi-AP Solo user guide for detail conguration and settings. 9. Wireless LAN port . This port is on the onboard wireless LAN module that allows you to set up a wireless network and exchange information with other wireless devices without tagling cables and wires.
ASUS P5K-E 2-25 15. USB 2.0 ports 3 and 4. These 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 16. Optical S/PDIF Out port . This port connects an external audio output device via an optical S/PDIF cable. 17. USB 2.
2-26 Chapter 2: Hardware information 2.7.2 Internal connectors 1. Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided oppy disk drive (FDD) signal cable. Insert one end of the cable to this connector , then connect the other end to the signal connector at the back of the oppy disk drive.
ASUS P5K-E 2-27 3. ICH9R Serial A T A connectors (7-pin SA T A1 [red], SA T A2 [red], SA T A3 [black], SA T A4 [black], SA T A5 [red], SA T A6 [red]) These connectors are for the Serial A T A signal cables for Serial A T A hard disk drives.
2-28 Chapter 2: Hardware information Connect the right-angle side of SA T A signal cable to SA T A device. Or you may connect the right-angle side of SA T A cable to the onboard SA T A port to avoid mechanical conict with huge graphics cards.
ASUS P5K-E 2-29 4. USB connectors (10-1 pin USB 78, USB 9 10, USB 1 1 12) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.
2-30 Chapter 2: Hardware information 6. CPU, chassis and power fan connectors (4-pin CPU_F AN, 3-pin CHA_F AN1-4, 3-pin PWR_F AN) The fan c onnect ors su pport cooli ng fan s of 3 50 mA ~ 2000 mA (24 W max.) or a total of 1 A ~ 7 A (84 W max.) at +12V .
ASUS P5K-E 2-31 8. AT X p owe r c on ne cto rs (24-pin EA TXPWR, 2x4-pin EA TX12V) These connectors are for A TX power supply plugs. The power supply plugs are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t.
2-32 Chapter 2: Hardware information • For a fully congured system, we recommend that you use a power supply unit (PSU) that complies with A TX 12 V Specication 2.0 (or later version) and provides a minimum power of 400 W . • Do not forget to connect the 4-pin/8pin EA TX12V power plug; otherwise, the system will not boot.
ASUS P5K-E 2-33 P5K-E ® P5K-E Internal audio connector CD Right Audio Channel Left Audio Channel Ground Ground 10. Optical drive audio con nec tor (4-pin CD) This connector allows you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner , or MPEG card.
2-34 Chapter 2: Hardware information • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector . The system power LED lights up when you turn on the system power , and blinks when the system is in sleep mode.
ASUS P5K-E 2-35 ASUS Q-Connector (system panel) Y ou can use the ASUS Q-Connector to connect/disconnect chassis front panel cables in a few steps. Refer to the instructions below to install the ASUS Q- Connector . 1. Connect the front panel cables to the ASUS Q-Connector .
2-36 Chapter 2: Hardware information.
3 Powering up This chapter describes the power up sequence, the vocal POST messages, and ways of shutting down the system..
ASUS P5K-E Chapter summary 3 3.1 Starting up for the rst time ........................................................ 3-1 3.2 T urning off the computer .
ASUS P5K-E 3-1 3.1 Starting up for the rst time 1. After making all the connections, replace the system case cover . 2. Be sure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector .
3-2 Chapter 3: Powering up 3.2 Turning off the computer 3.2.1 Using the OS shut down function If you are using Windows ® XP: 1. Click the Start button then select T urn Off Computer . 2. Click the T urn Off button to shut down the computer . 3. The power supply should turn off after Windows ® shuts down.
4 BIOS setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
Chapter summary 4 ASUS P5K-E 4.1 Managing and updating your BIOS ............................................ 4-1 4.2 BIOS setup program .................................................................... 4-8 4.3 Main menu ...........................
ASUS P5K-E 4-1 4.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS Update (Updates the BIOS in Windows ® environment.) 2. ASUS EZ Flash 2 (Updates the BIOS using a oppy disk or USB ash disk.
4-2 Chapter 4: BIOS setup Quit all Windows ® applications before you update the BIOS using this utility . 3. Select the ASUS FTP site nearest you to avoid network trafc, or click Auto Select . Click Next . Updating the BIOS through the Internet T o update the BIOS through the Internet: 1.
ASUS P5K-E 4-3 Updating the BIOS through a BIOS le T o update the BIOS through a BIOS le: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate . The ASUS Update main window appears.
4-4 Chapter 4: BIOS setup T o update the BIOS using EZ Flash 2: 1. Visit the ASUS website (www .asus.com) to download the latest BIOS le for the motherboard. 2. Save the BIOS le to a oppy disk or a USB ash disk, then restart the system. 4.
ASUS P5K-E 4-5 4.1.3 AFUDOS utility The AFUDOS utility allows you to update the BIOS le in DOS environment using a bootable oppy disk with the updated BIOS le. This utility also allows you to copy the current BIOS le that you can use as backup when the BIOS fails or gets corrupted during the updating process.
4-6 Chapter 4: BIOS setup 2. Copy the AFUDOS utility (afudos.exe) from the motherboard support CD to the bootable oppy disk you created earlier . 3. Boot the system in DOS mode, then at the prompt type: afudos /i[lename] where [lename] is the latest or the original BIOS le on the bootable oppy disk.
ASUS P5K-E 4-7 4.1.4 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process.
4-8 Chapter 4: BIOS setup 4.2 BIOS setup program This motherboard supports a programmable Serial Peripheral Interface (SPI) chip that you can update using the provided utility described in section 4.
ASUS P5K-E 4-9 Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2007, American Megatrends, Inc. BIOS SETUP UTILITY Main Advanced Power Boot Tools Exit System Time [10:55:25] System Date [Thu 04/14/2007] Floppy Diskette A [1.
4-10 Chapter 4: BIOS setup 4.2.4 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power , Boot, and Exit) on the menu bar have their respective menu items.
ASUS P5K-E 4-1 1 4.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. 4.3.1 System Time [xx:xx:xx] Allows you to set the system time. 4.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date.
4-12 Chapter 4: BIOS setup 4.3.5 SA T A 1-6 While entering Setup, the BIOS automatically detects the presence of Serial A T A devices. There is a separate sub-menu for each SA T A device. Select a device item then press <Enter> to display the SA T A device information.
ASUS P5K-E 4-13 DMA Mode [Auto] Selects the DMA mode. Conguration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and Reporting T echnology .
4-14 Chapter 4: BIOS setup Intel Robson T echnology [Disabled] Allows you to enable or disable Intel Robson T echnology . Conguration option: [Disabled] [Enabled] The Intel Robson T echnology appears only when you set the item Congure SA T A as to [AHCI].
ASUS P5K-E 4-15 4.3.8 System Information This menu gives you an overview of the general system specications. The BIOS automatically detects the items in this menu. AMIBIOS Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specication.
4-16 Chapter 4: BIOS setup BIOS SETUP UTILITY Advanced 4.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. 4.4.1 JumperFree Conguration T ake caution when changing the settings of the Advanced menu items.
ASUS P5K-E 4-17 FSB/CPU External Frequency Synchronization FSB Frequency [266] Displays the frequency sent by the clock generator to the system bus and PCI bus. The value of this item is auto-detected by the BIOS. Use the <+> and <-> keys to adjust the FSB frequency .
4-18 Chapter 4: BIOS setup The following items appear when you set the DRAM Timing Control item to [Manual]. CAS# Latency [ 5] Conguration options: [3] [4] [5] [6] RAS# to CAS# Delay [ 5 DRAM Clock.
ASUS P5K-E 4-19 CPU V oltage [Auto] Allows you to select the CPU VCore voltage. Conguration options: [Auto] [1.7000V] [1.6875V] [1.6750V] [1.6625V] [1.6500V] [1.6375V] [1.6250V] [1.6125V] [1.6000V] [1.5875V] [1.5750V] [1.5625V] [1.5500V] [1.5375V] [1.
4-20 Chapter 4: BIOS setup The USB 2.0 Controller Mode item appears only when you enable the USB 2.0 Controller . USB 2.0 Controller [Enabled] Allows you to enable or disable the USB 2.0 controller . Conguration options: [Enabled] [Disabled] USB 2.
ASUS P5K-E 4-21 BIOS EHCI Hand-off [Enabled] Allows you to enable the support for operating systems without an EHCI hand-off feature. Conguration options: [Disabled] [Enabled] Port 64/60 Emulation [Disabled] Allows you to enable or disable the I/O port 60h/64h emulation support.
4-22 Chapter 4: BIOS setup Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2007, American Megatrends, Inc. BIOS SETUP UTILITY Advanced 4.4.3 CPU Conguration The items in this menu show the CPU-related information that the BIOS automatically detects.
ASUS P5K-E 4-23 BIOS SETUP UTILITY Advanced 4.4.4 Chipset The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu. Advanced Chipset Settings WARMING: Setting wrong values in below sections may cause system to malfunction.
4-24 Chapter 4: BIOS setup 4.4.5 OnBoard Devices Conguration Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.
ASUS P5K-E 4-25 4.4.6 PCIPnP The PCIPnP menu items allow you to change the advanced settings for PCI/PnP devices. T ake caution when changing the settings of the PCIPnP menu items. Incorrect eld values can cause the system to malfunction. Plug And Play O/S [NO] When set to [NO], BIOS congures all the devices in the system.
4-26 Chapter 4: BIOS setup 4.5 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press <Enter> to display the conguration options.
ASUS P5K-E 4-27 4.5.5 APM Conguration Restore On AC Power Loss [Power Off] When set to [Power Off], the system goes into of f state after an AC power loss.
4-28 Chapter 4: BIOS setup Power On By PS/2 Keyboard [Disabled] Allows you to disable the Power On by PS/2 keyboard function or set specic keys on the PS/2 keyboard to turn on the system. This feature requires an A TX power supply that provides at least 1A on the +5VSB lead.
ASUS P5K-E 4-29 CPU Q-Fan Control [Disabled] Allows you to enable or disable the CPU Q-fan. Conguration options: [Disabled] [Enabled] The following item appears only when you enable CPU Q-Fan Control. CPU Fan Prole [Optimal] Allows you to set the appropriate performance level of the ASUS Q-Fan.
4-30 Chapter 4: BIOS setup 4.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.
ASUS P5K-E 4-31 4.6.2 Boot Settings Conguration Quick Boot [Enabled] Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items.
4-32 Chapter 4: BIOS setup 4.6.3 Security The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the conguration options. Change Supervisor Password Select this item to set or change the supervisor password.
ASUS P5K-E 4-33 User Access Level [Full Access] This item allows you to select the access restriction to the Setup items. Conguration options: [No Access] [View Only] [Limited] [Full Access] [No Access] prevents user access to the Setup utility . [View Only] allows access but does not allow change to any eld.
4-34 Chapter 4: BIOS setup 4.7 Tools menu The T ools menu items allow you to congure options for special functions. Select an item then press <Enter> to display the sub-menu. Select Screen Select Item +- Change Field Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.
ASUS P5K-E 4-35 Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2007, American Megatrends, Inc. BIOS SETUP UTILITY Tools O.C. PROFILE Conguration O.C. Prole 1 Status : Not Installed O.
4-36 Chapter 4: BIOS setup 4.7.3 Ai Net 2 v02.58 (C)Copyright 1985-2007, American Megatrends, Inc. BIOS SETUP UTILITY Advanced Check LAN cable during POST.
ASUS P5K-E 4-37 4.8 Exit menu Pressing <Esc> does not immediately exit this menu. Select one of the options from this menu or <F10> from the legend bar to exit. The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items.
4-38 Chapter 4: BIOS setup.
5 Software support This chapter describes the contents of the support CD that comes with the motherboard package and the softwares..
ASUS P5K-E Chapter summary 5 5.1 Installing an operating system ................................................... 5-1 5.2 Support CD information .............................................................. 5-1 5.3 Software information ............
ASUS P5K-E 5-1 If Autorun is NOT enabled in your computer , browse the contents of the support CD to locate the le ASSETUP .EXE from the BIN folder . Double-click the ASSETUP .EXE to run the CD. Click an item to install 5.1 Installing an operating system This motherboard supports Windows ® XP/ 64-bit XP/ Vista™ operating systems (OS).
5-2 Chapter 5: Software support 5.2.2 Drivers menu The Drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS InstAll-Drivers Installation Wizard Installs all of the drivers through the Installation Wizard.
ASUS P5K-E 5-3 5.2.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. ASUS InstAll-Installation Wizard for Utilities Installs all of the utilities through the Installation Wizard. ASUS Update The ASUS Update utility allows you to update the motherboard BIOS in Windows ® environment.
5-4 Chapter 5: Software support ADOBE Acrobat Reader V7.0 Installs the Adobe ® Acrobat ® Reader that allows you to open, view , and print documents in Portable Document Format (PDF). Microsoft DirectX 9.0c Installs the Microsoft ® DirectX 9.0 driver .
ASUS P5K-E 5-5 5.2.4 Make disk menu The Make disk menu contains items to create the Intel ICH9 or JMicron ® JMB36X RAID/AHCI driver disk. Make Intel ICH9 32/64bit RAID/AHCI Driver Disk Allows you to create an ICH9 32/64bit RAID/AHCI driver disk.
5-6 Chapter 5: Software support 5.2.6 ASUS Contact information Click the Contact tab to display the ASUS contact information. Y ou can also nd this information on the inside front cover of this user guide. 5.2.5 Manual menu The Manual menu contains a list of supplementary user manuals.
ASUS P5K-E 5-7 Browse this CD Displays the support CD contents in graphical format. 5.2.7 Other information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support CD. Click an icon to display the specied information.
5-8 Chapter 5: Software support T echnical support Form Displays the ASUS T echnical Support Request Form that you have to ll out when requesting technical support.
ASUS P5K Deluxe 5-9 5.3 Software information Most of the applications in the support CD have wiza rds that will conveniently guide you through the installation. View the online help or readme le that came with the software application for more information.
5-10 Chapter 5: Software support 9. When the screen returns to the ASUS Update utility , ash the original BIOS to load the new boot logo. 10. After ashing the BIOS, restart the computer to display the new boot logo during POST . 8. Adjust the boot image to your desired size by selecting a value on the Ratio box.
ASUS P5K Deluxe 5-1 1 3. Click the Run button to perform a cable test. 5.3.2 AI NET2 The AI NET2 features the Marvell ® Virtual Cable T ester™ (VCT). VCT is a cable diagnostic utility that reports LAN cable faults and shorts using the T ime Domain Reectometry (TDR) technology .
5-12 Chapter 5: Software support 5.3.3 ASUS PC Probe II PC Probe II is a utility that monitors the computer’s vital components, and detects and alerts you of any problem with these components. PC Probe II senses fan rotations, CPU temperature, and system voltages, among others.
ASUS P5K-E 5-13 Button Function Opens the Conguration window Opens the Report window Opens the Desktop Management Interface window Opens the Peripheral Component Interconnect window Opens the Windo.
5-14 Chapter 5: Software support Changing the monitor panels position T o change the position of the monitor panels in the desktop, click the arrow down button of the Scheme options, then select another position from the list box. Click OK when nished.
ASUS P5K-E 5-15 Monitoring sensor alert The monitor panel turns red when a component value exceeds or is lower than the threshold value. Refer to the illustrations below . Large display Small display WMI browser Click to display the WMI (Windows Management Instrumentation) browser .
5-16 Chapter 5: Software support PCI browser Click to display the PCI (Peripheral Component Interconnect) browser . This browser provides information on the PCI devices installed on your system. Click the plus sign (+) before the PCI Information item to display available information.
ASUS P5K-E 5-17 Memory usage The Memory tab shows both used and available physical memory . The pie chart at the bottom of the window represents the used (blue) and the available physical memory . Conguring PC Probe II Click to view and adjust the sensor threshold values.
5-18 Chapter 5: Software support 5.3.4 ASUS AI Suite ASUS AI Suite allows you to launch AI Gear 2, AI N.O.S., AI Booster , AI Nap, and Q-Fan 2 utilities easily . Installing AI Suite T o install AI Suite on your computer: 1. Place the support CD to the optical drive.
ASUS P5K-E 5-19 Other feature buttons Click on right corner of the main window to open the monitor window . Click on right corner of the expanded window to switch the temperature from degrees Centigrade to degrees Fahrenheit.
5-20 Chapter 5: Software support 5.3.5 ASUS AI Gear 2 ASUS AI Gear 2 provides four system performance options that allows you to select the best performance setting for your computing needs. This easy-to-use utility adjusts the processor frequency and vCore voltage to minimize system noise and power consumption.
ASUS P5K-E 5-21 5.3.6 ASUS AI Nap This feature allows you to minimize the power consumption of your computer whenever you are away . Enable this feature for minimum power consumption and a more quiet system operation.
5-22 Chapter 5: Software support 5.3.7 ASUS AI N.O.S. This ASUS Non-delay Overclocking System feature intelligently determines the system load and automatically boosts the performance for the most demanding tasks.
ASUS P5K-E 5-23 5.3.8 ASUS Q-Fan 2 This ASUS Q-Fan 2 Control feature allows you to set the appropriate performance level of the CPU Q-Fan 2 or the Chassis Q-Fan 2 for more efcient system operation.
5-24 Chapter 5: Software support 5.3.9 ASUS AI Booster The ASUS AI Booster application allows you to overclock the CPU speed in WIndows ® environment without the hassle of booting the BIOS.
ASUS P5K-E 5-25 5.3.10 SoundMAX ® High Denition Audio utility The ADI AD1988 High Denition Audio CODEC provides 8-channel aud io capability through the SoundMAX ® audio utility with AudioESP™ software to deliver the ultimate audio experience on your PC.
5-26 Chapter 5: Software support From the taskbar , double-click on the SoundMAX ® icon to display the SoundMAX ® Control Panel. Audio Setup Wizard By clicking the icon from the SoundMAX ® control panel, you can easily congure your audio settings.
ASUS P5K-E 5-27 Jack conguration This screen helps you congure your computer’s audio ports, depending on the audio devices you have installed. Adjust speaker volume This screen helps you adjust speaker volume. Click the T est button to hear the changes you have made.
5-28 Chapter 5: Software support Audio preferences Click the icon to go to the Preferences page. This page allows you to change various audio settings. General options Click the General tab to choose your playback and recording devices, enable/ disable the AudioESP™ feature, and enable/disable digital output.
ASUS P5K-E 5-29 Microphone options Click the Microphone tab allows you to optimize your microphone input settings. Enhanced Microphone Features V oice recording Enables Noise Filter function.
5-30 Chapter 5: Software support If you want to boot the system from a hard disk drive included in a created RAID set, copy rst the RAID driver from the support CD to a oppy disk before you install an operating system to the selected hard disk drive.
ASUS P5K-E 5-31 5.4.2 Intel ® RAID congurations This motherboard supports RAID 0 and RAID 1 congurations for Serial A T A hard disks drives through the Intel ® ICH9R Southbridge chip. Setting the RAID item in BIOS Y ou must set the RAID item in the BIOS Setup before you can create a RAID set(s).
5-32 Chapter 5: Software support Creating a RAID 0 set (striped) T o create a RAID 0 set: 1. From the utility main menu, select 1. Create RAID V olume, then press <Enter>. This screen appears. 2. Enter a name for the RAID 0 set, then press <Enter>.
ASUS P5K-E 5-33 6. Use the up/down arrow key to select the stripe size for the RAID 0 array , then press <Enter>. The available stripe size values range from 4 KB to 128 KB.
5-34 Chapter 5: Software support Creating a RAID 1 set (mirrored) T o create a RAID 1 set: 1. From the utility main menu, select 1. Create RAID V olume, then press <Enter>. This screen appears. 2. Enter a name for the RAID 1 set, then press <Enter>.
ASUS P5K-E 5-35 5.4.3 JMicron ® RAID Conguration The JMicron ® Serial A T A controller allows you to congure RAID 0, RAID 1 and JBOD sets on the external Serial A T A hard disk drives. Before creating a RAID set Prepare the following items: 1.
5-36 Chapter 5: Software support Entering the JMB363 RAID BIOS utility 1. During POST , press <Ctrl-J> to enter the JBM363 RAID BIOS menu. JMicron Technology Corp. PCI-to-SATA II/IDE RAID Controller BIOS v0.97 Copyright (C) 2004-2005 JMicron Technology http://www.
ASUS P5K-E 5-37 2. When the Level item is highlighted, use the up/down arrow key to select the RAID set that you want to create. 3. When the Disks item is highlighted, use the up/down arrow key to highlight an HDD that you want to belong to the RAID set, then press the space bar to conrm selection.
5-38 Chapter 5: Software support 5. When done, press <Enter> to conrm the creation of the RA ID set. A dialogue box appears to conrm the action. Press <Y> to conrm; otherwise, press <N>. 6. The following screen appears, displaying the relevant information about the RAID set you created.
ASUS P5K-E 5-39 Deleting a RAID set 1. In the main JMB363 RAID BIOS menu, highlight Delete RAID Disk Drive using the up/down arrow key then press <Enter>. 2. Use the space bar to select the RAID set you want to delete. A selected set shows a sign before it.
5-40 Chapter 5: Software support Resetting disks to non-RAID T o reset disks to non-RAID: 1. In the main JMB363 RAID BIOS menu, highlight Revert HDD to non-RAID using the up/down arrow key then press <Enter>. 2. Use the space bar to select the HDD that you want to reset to non-RAID.
ASUS P5K-E 5-41 T o solve a Mirror conict: 1. In the main JMB363 RAID BIOS menu, highlight Solve Mirror Conict using the up/down arrow key then press <Enter>. 2. Use the space bar to select the HDD that you want to set as source drive. The selected HDD shows a sign before it.
5-42 Chapter 5: Software support Saving the settings and exiting setup When you have nished, highlight Save & Exit Setup using the up/down arrow key then press <Enter> to save the current RAID conguration and exit the JMB363 RAID BOS utility .
ASUS P5K-E 5-43 5.5.2 Creating a RAID driver disk in Windows ® T o create a RAID driver disk in Windows ® : 1. Start Windows ® . 2. Place the motherboard support CD into the optical drive.
5-44 Chapter 5: Software support T o install the RAID driver in Windows XP: 1. During the OS installation, the system prompts you to press the <F6> key to install third-party SCSI or RAID driver . 2. Press <F6> then insert the oppy disk with RAID driver into the oppy disk drive.
6 This chapter tells how to install A TI ® CrossFire™ graphics cards to avail of A TI’s Multi-Video Processing technology . ATI ® CrossFire™ technology support.
ASUS P5K-E Chapter summary 6 6.1 Overview ....................................................................................... 6-1 6.2 Installing CrossFire™ graphics cards ....................................... 6-2 6.3 Software information .....
ASUS P5K-E 6-1 6.1 Overview The motherboard supports the A TI ® CrossFire™ technology that allows you to install multi-graphics processing units (GPU) graphics cards.
6-2 Chapter 6: A TI ® MVP technology support Slave graphics card Master graphics card 2. Insert the CrossFire™ Edition (Master) graphics card into the PCI Express x16 blue slot.
ASUS P5K-E 6-3 3. Insert the CrossFire™-ready (Slave) graphics card into the PCI Express x16 black slot. Make sure that the card is properly seated on the slot.
6-4 Chapter 6: A TI ® MVP technology support 6. Connect the other end of the external cable to the Slave graphics card. 7. Connect the loose end to the corresponding port on your monitor . 5. Connect one end of the external cable to the Master graphics card.
ASUS P5K-E 6-5 6.3 Software information 6.3.1 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers.
6-6 Chapter 6: A TI ® MVP technology support 6. Select the components that you want to install, then click Next . Setup prepares the installation wizard that will guide you to setup process. Windows automatically congures the A TI Catalyst Control Center .
ASUS P5K-E 6-7 6.3.2 Using the Catalyst™ Control Center The Catalyst™ Control Center allows you to access display features of the A TI hardware and software you installed. Use this application to adjust your graphic settings, enable/disable connected devices, and change your desktop orientation.
6-8 Chapter 6: A TI ® MVP technology support The Catalyst™ Control Center Dialog Box View The Catalyst™ Control Center provides two views: Standard - simple view with wizards for beginners Advance - allows advanced users to access and congure the complete features of the software Set to Advance view to enable the CrossFire™ function.
ASUS P5K-E 6-9 T o enable CrossFire™: 1. Set the view to Advance . 2. Click the Crossre™ item in Graphics Settings. 3. In the CrossFire™ Settings dialog, tick the box opposite Enable CrossFire™ .
6-10 Chapter 6: A TI ® MVP technology support Profiles Click the Proles tab on the Catalyst™ Control Center to access the Proles Manager , which allows you to create customized environments for your desktop, video, and 3D applications.
ASUS P5K-E 6-1 1 Help Click the Help tab on the Catalyst™ Control Center to access the online help system, generate a Problem Report, and get the Catalyst™ Control Center version information.
6-12 Chapter 6: A TI ® MVP technology support.
A CPU features The Appendix describ es the CPU features and technologies that the motherboard supports..
ASUS P5K-E Chapter summary A A.1 Intel ® EM64T .................................................................................. A-1 A.2 Enhanced Intel SpeedStep ® T echnology (EIST) ........................ A-1 A.3 Intel ® Hyper-Threading T echnology .
ASUS P5K-E A-1 A.1 Intel ® EM64T • The motherboard is fully compatible with Intel ® LGA775 processors running on 32-bit operating systems. • The motherboard comes with a BIOS le that supports EM64T . Y ou can download the latest BIOS le from the ASUS website (www .
A-2 Appendix: CPU features A.2.2 Using the EIST T o use the EIST feature: 1. T urn on the computer , then enter the BIOS Setup. 2. Go to the Advanced Menu, highlight CPU Conguration, then press <Enter>. 3. Set the Intel(R) SpeedStep T echnology item to [Automatic], then press <Enter>.
ASUS P5K-E A-3 A.3 Intel ® Hyper-Threading Technology • The motherboard supports Intel ® Pentium ® 4 LGA775 processors with Hyper-Threading T echnology . • Hy per -Thr ead ing Te chn ol ogy is sup por ted und er Win dow s ® Vista/XP/2003 Server and Linux 2.
A-4 Appendix: CPU features.
Ein wichtiger Punkt beim Kauf des Geräts Asus P5K-E/WiFi-AP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Asus P5K-E/WiFi-AP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Asus P5K-E/WiFi-AP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Asus P5K-E/WiFi-AP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Asus P5K-E/WiFi-AP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Asus P5K-E/WiFi-AP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Asus P5K-E/WiFi-AP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Asus P5K-E/WiFi-AP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Asus P5K-E/WiFi-AP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
