Benutzeranleitung / Produktwartung CT 34WX50 des Produzenten Panasonic
Zur Seite of 73
Wide Screen TV Operating Instructions Model No. English TQBC0213-2 CT -34WX50 For assistance, please call : 1-888-VIEW -PTV(843-9788) or send e-mail to : consumerproducts@panasonic.com or visit us at www .panasonic.co.jp/global/ (U.S.A) For assistance, please call : 787-750-4300 or visit us at www .
本誌の制作番号の経緯 MBS0100S0(MS) プリプロ 1 号機∼ MBS0100S1020(MS) 量産 1 号機∼ （カナダより修正依頼分を反影） MBS0100S2020(MS) 量産 3 月度生産.
2 W ARNING: T o reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrow-head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
3 Important Safety Instructions 1) Read these instructions. All the safety and operating instructions should be read before the appliance is operated. 2) Keep these instructions. The safety and operating instructions should be retained for future reference.
4 A VERTISSEMENT : Pour r é duire les risques de secousse é lectrique, ne pas retirer le couvercle ni le panneau arri è re. Cet appareil ne contient aucune pi è ce qui puisse ê tre r é par é e par l'utilisateur; l'entretien doit ê tre effectu é par du personnel qualifi é .
5 Pr é cautions de s é curit é importantes 1) Lisez ces instructions. Lisez toutes les instructions de sécurité et de fonctionnement avant d’utiliser l’appareil. 2) Conservez ces instructions. Les instructions de sécurité et de fonctionnement doivent être conservées à titre d’information.
6 Note: This product utilizes both a Cathode Ray T ube (CRT) and other components that contain lead. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: <http:// www .
7 T able of Contents Important Safety Instructions ....................................... 2 Installation ...................................................................... 8 Receiver Location ......................................................
8 The Video/Audio connection between components can be made with shielded video and audio cables. For best performance, video cables should utilize 75 ohm coaxial shielded wire.
9 Remote Control Battery Installation Helpful Hint: For frequent remote control users, replace old batteries with Alkaline batteries for longer life. Note: In order to maximize the life of the batteries, the lighted buttons on the Remote Control can be turned OFF and ON by pressing R-TUNE and RECALL at the same time.
10 Connecting the Antenna Cable to the RF In T erminal 1 23 INPUT COM P O N E N T V I D E O INPUT PROG. OUT S - V I D E O V I D E O A U D I O - L A U D I O - R Y P B P R L R AUDIO VIDEO UHF Antenna RF.
11 Installation Antenna / Cable Connection Incoming Cable From Home Antenna (75 Ohm) VHF/UHF on Back of Set Cable Connection - For reception of cable channels (01 - 125) connect the cable supplied by your local cable company . Antenna Mode must be set to CABLE.
12 Antenna Connection (Cable Box, no VCR) Use this configuration when connecting the TV to a cable TV system using a Cable Box. Antenna Connection (Cable Box, and VCR) Use this configuration when connecting the TV to a cable TV system using a Cable Box and VCR.
13 Notes: (1) When a monaural VCR is used, connect the monaural audio cable to the AUDIO-L (Left) terminal. (2) Similar connections are available at the INPUT 1, 2, 3, 4 input terminals. Input 4 is located on the front of the unit. Select the desired VIDEO input position by pushing the TV/VIDEO button.
14 Installation Audio OUT P B Y P R DVD(Y • P B • P R ) AUDIO DVD(Y • P B • P R ) OUT L R DVD Player COMPONENT VIDEO INPUT Y P B P R Y P B P R L R AUDIO VIDEO 1 2 Recording Equipment (VHS VCR) VIDEO AUDIO Audio IN Video IN S-Video IN S-VIDEO Cable R L 1 23 INPUT PROG.
15 Installation Connecting Headphones / Earphones Connect headphones / earphones as follows. (Optional) HPJ LEFT P. EPJ RIGHT P. INPUT4 S-VIDEO VIDEO L-AUDIO-R Y ou can listen to sound from each of the headphones Jacks as shown below .
16 Illuminated Remote Control Location of Controls Power button Press to turn the TV ON or OFF (See page 19). Note: The TV ’ s power cord must first be plugged into the wall outlet and then turned on at the POWER switch (standby mode).
17 LIGHT ASPECT MUTE TV/VIDEO VCR DVD AUX RCVR TV DTV CBL DBS CH VOL VOL CH MENU INFO/RECALL A V-ADJ NORMAL GAME RH-SPLIT EXIT VCR REC GUIDE REW SEARCH STOP PLA Y SPLIT FF FREEZE TV/VCR SLOW SWAP P AU.
18 Location of Controls Controls and T erminals on the TV Action button (see page 21) V olume up(+) / down( – ) buttons (see page 20, 26) Program number selection buttons (see page 21, 26) ACTION TV/VIDEO MENU HPJ LEFT P. EPJ RIGHT P. INPUT4 S-VIDEO VIDEO L-AUDIO-R VOLUME CHANNEL 1 23 INPUT COMPONENT VIDEO I NPUT PROG.
19 Power ON / OFF Note: Main plug types vary between countries. The power plug shown at left may , therefore, not be the type fitted to your set. Push the POWER switch on the TV to turn the set on. POWER-ON: Green Example: The screen below is displayed for a while after the TV is turned on.
20 LIGHT ASPECT MUTE TV/VIDEO VCR DVD AUX RCVR TV DTV CBL DBS INFO/RECALL A V-ADJ NORMAL GAME RH-SPLIT EXIT VCR REC GUIDE REW SEARCH STOP PLA Y SPLIT FF FREEZE TV/VCR SLOW SWAP P AUSE OPEN/CLOSE VCR/D.
21 ACTION 1 2 ACTION TV/VIDEO MENU VOLUME CHANNEL 1 2 PICTURE ADJ. NORMAL NORMAL OFF ON AUTO SELECT PICTURE PICTURE MENU BRIGHTNESS COLOR TINT SHARPNESS COLOR TEMP ADVANCED ADJ. EXIT ACTION 20 0 0 0 0 – + – + – + – + POSITION/SIZE POSITION NORMAL NORMALIZE SIZE 1 AUDIO ADJ.
22 Press to select PROGRAM CHANNEL. Press to display the PROGRAM CHANNEL. T uning channels (Automatic channel programming) Automatically searches and adds receivable channels in the installed area and/or CA TV signals to the program.
23 PROGRAM CHANNELS TV CABLE MODE MANUAL PROGRAM AUTO PROGRAM SELECT EXIT CHANGE Press to select MODE. Press to select TV or CABLE. T uning channels (Manual channel programming) Use this setting when changing setting of receiving channels or changing the channel display .
24 ASPECT Controls The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. LIGHT MUTE TV/VIDEO VCR DVD AUX RCVR TV DTV CBL DBS C.
25 ASPECT Controls Mode Panasonic AUTO NORMAL ZOOM FULL JUST Explanation NORMAL will display a 4:3 picture at its standard 4:3 size. ZOOM mode magnifies the central section of the picture. FULL will display the picture at its maximum size but with sight elongation.
26 VHF , UHF and CA TV ACTION TV/VIDEO MENU HPJ LEFT P EPJ RIGHT P INPUT4 S-VIDEO VIDEO L-AUDIO-R VOLUME CHANNEL Power switch Remote control sensor Operation can be done from the TV set.
27 Cable TV LIGHT ASPECT MUTE TV/VIDEO VCR DVD AUX RCVR TV DTV DBS CH VOL VOL CH MENU INFO/RECALL A V-ADJ NORMAL GAME RH-SPLIT EXIT VCR REC GUIDE REW SEARCH STOP PLA Y SPLIT FF FREEZE TV/VCR SLOW SWAP.
28 Searching for the desired channel (channel search) Notes: • T o end channel search, press SEARCH STOP . • Channel search can be activated from the MENU screen. Channel search: Channel search displays each channel, in order , as a paused image. Channels are displayed from the left top to the right bottom in order .
29 Playing a VCR or other peripheral equipment LIGHT ASPECT MUTE VCR DVD AUX RCVR TV DTV CBL DBS CH VOL VOL CH MENU INFO/RECALL A V-ADJ NORMAL GAME RH-SPLIT EXIT VCR REC GUIDE REW SEARCH STOP PLA Y SPLIT FF FREEZE TV/VCR SLOW SWAP P AUSE OPEN/CLOSE VCR/DBS CHANNEL STILL 123 456 789 0 R-TUNE PROG ACTION POWER TV/VIDEO 1 2 3 T urn the TV on.
30 Playing games in game mode LIGHT ASPECT MUTE TV/VIDEO VCR DVD AUX RCVR TV DTV CBL DBS CH VOL VOL CH MENU INFO/RECALL A V-ADJ NORMAL RH-SPLIT EXIT VCR REC GUIDE REW SEARCH STOP PLA Y SPLIT FF FREEZE TV/VCR SLOW SWAP P AUSE OPEN/CLOSE VCR/DBS CHANNEL STILL 123 456 789 0 R-TUNE PROG ACTION POWER GAME 1 2 3 T urn on the TV .
31 Recall / Mute LIGHT ASPECT TV/VIDEO VCR DVD AUX RCVR TV DTV CBL DBS CH VOL VOL CH MENU A V-ADJ NORMAL GAME RH-SPLIT EXIT VCR REC GUIDE REW SEARCH STOP PLA Y SPLIT FF FREEZE TV/VCR SLOW SWAP P AUSE .
32 (The previously selected screen appears.) Example: T wo screen mode set to NORMAL aspect. • Returning to one screen. Split screen LIGHT MUTE TV/VIDEO VCR DVD AUX RCVR TV DTV CBL DBS CH VOL VOL CH.
33 Screen mode names: SPLIT SCREEN FULL SPLIT SCREEN NORMAL PoutP 1 2 Changing the channel of the right screen during SPLIT SCREEN FULL, SPLIT SCREEN NORMAL, and PoutP . RH-SPLIT Press to operate right screen. 5 While is displayed on the screen, press to switch modes.
34 Adjusting screen position and size LIGHT MUTE TV/VIDEO VCR DVD AUX RCVR TV DTV CBL DBS INFO/RECALL A V-ADJ NORMAL GAME RH-SPLIT EXIT VCR REC GUIDE REW SEARCH STOP PLA Y SPLIT FF FREEZE TV/VCR SLOW .
35 Switching screen width During NORMAL mode, if noise appears on the ends of the image in SIZE 1, switch to SIZE 2. CH VOL VOL CH ACTION CH VOL VOL CH ACTION CH VOL VOL CH ACTION CH VOL VOL CH ACTION Press to narrow (SIZE 2). Press to widen (SIZE 1).
36 Audio Adjustments Automatically adjusts quiet sound and loud sound for ease of listening. Emits the original sound. Gives contrast to sound. For programs consisting mainly of music. Enhances high sounds (around 4 kHz). Enhances high sounds even more.
37 CH VOL VOL CH ACTION AUDIO ADJUST NORMAL AUTO OFF ON OFF ON AUDIO MENU SURROUND CENTER SP – T urning the center speaker ON and OFF to enhance the mood During AUDIO ADJUST menu: Press to select CENTER SP . Press to select switch. ON : • Sound given off from the center is enhanced and stability is increased.
38 Picture Adjustments Press the MENU button to display the MENU screen and select ADJUST . 1 2 Press to select to PICTURE ADJUST . CH VOL VOL CH ACTION Press to display the PICTURE ADJUST screen. MENU ADJUST CUSTOM PICTURE AUDIO PICTURE ADJUST POSITION/SIZE SELECT AUDIO ADJUST SET UP EXIT PAGE ACTION PICTURE ADJ.
39 CH VOL VOL CH ACTION PICTURE ADJ. NORMAL NORMAL OFF ON AUTO SELECT PICTURE PICTURE MENU BRIGHTNESS COLOR TINT SHARPNESS COLOR TEMP ADVANCED ADJ. EXIT ACTION 20 0 0 0 0 – + – + – + – + PICTURE Selects proper brightness and density for the room.
40 CH VOL VOL CH ACTION MENU ADVANCED ADJUST NORMALIZE SELECT VM GAIN BLACK EXTENSION WHITE CHAR CORR COLOR TEMP CORR EXIT ADJUST 1 1 1 1 CH VOL VOL CH ACTION ADV ANCED PICTURE ADJUST During ST ANDARD or CINEMA mode, ADV ANCED ADJUST setting is possible.
41 Playing special video software When playing special images such as three dimensional video disks on video disk players or game software on video game players, use GAME mode. Use TV mode for normal viewing. Selecting VIDEO menu Press the MENU button to display the MENU screen and select SETUP .
42 Press to select CLOSED CAPTION. Press to display the CLOSED CAPTION screen. Closed Captions This receiver has a built in decoder that provides a visual depiction of the audio portion of a television program in the form of written words across the screen (white or colored letters on a black background).
43 3 Press to select CC MODE. Press to select from the following: CLOSED CAPTION NO ON MUTE OFF MODE SELECT EXIT CHANGE OFF C1 C2 T1 T2 C3 C4 T3 T4 OFF MODE • CAPTION OFF - • CAPTION C1 - • CAPT.
44 LIGHT ASPECT MUTE TV/VIDEO VCR DVD AUX RCVR TV DTV CBL DBS INFO/RECALL A V-ADJ NORMAL GAME RH-SPLIT EXIT VCR REC GUIDE REW SEARCH STOP PLA Y SPLIT FF FREEZE TV/VCR SLOW SWAP P AUSE OPEN/CLOSE VCR/DBS CHANNEL STILL R-TUNE PROG POWER MENU CH VOL VOL CH ACTION 123 456 789 0 Press the MENU button to display the MENU screen and select SETUP .
45 Press to select rating to lock. 3 4 Press to select MOTION PICT . ST A TUS. Press to select ON or OFF . ON: The broadcasts selected in the MOTION PICTURE RA TING menu cannot be viewed. OFF: LOCK is deactivated and any broadcast, regardless of the setting for MOTION PICTURE RA TING, can be viewed.
46 Lock Feature Press to select TV P ARENT AL ST A TUS. Press to select ON or OFF . LOCK OFF ON – – – – MOTION PICT. STATUS CHANGE CODE TV PARENTAL STATUS CHANGE SETTING CHANGE SETT.
47 Locking and unlocking • When a title field is selected, all ratings below this rating are selected. • When options within an option field are selected, ratings below this rating within the same field are selected. • Ratings displayed in green are unlocked and those displayed in red are blocked programs.
48 Press the MENU button to display the MENU screen and select SETUP . Customizing the VIDEO INPUT labels Press to select VIDEO. Press to display the VIDEO screen. Display for each VIDEO INPUT can be changed to match with the connected device (VCR, video games).
49 MENU CH VOL CH ACTI O CH VOL CH C TION VIDEO INPUT LABEL VIDEO 1 VIDEO 1 COMPONENT 2 COMPONENT 2 COMPONENT 1 COMPONENT 1 VIDEO 4 VIDEO 4 VIDEO 3 VIDEO 3 VIDEO 2 VIDEO 2 SELECT EXIT CHANGE Press to change. Note: When DVD or DTV is selected for the change, images are adjusted to match each input signal.
50 CH VOL VOL CH ACTION Press the MENU button to display the MENU screen and select CUSTOM . Press to select AUDIO MODE. Press to display the AUDIO MODE screen.
51 Using the off-timer MENU Press the MENU button to display the MENU screen. Press the left “ ” or right “ ” button to select CUST OM. Press the up “ ” or down “ ” button to select SLEEP TIMER. Press to displayed SLEEP TIMER adjust screen.
52 MENU ADJUST CUSTOM CHANNEL SEARCH SLEEP TIMER 0 AUDIO MODE SELECT POWER SAVE STANDARD SET UP EXIT PAGE ACTION V iewing with reduced brightness (POWER SA VE) POWER SAVE STANDARD POWER SAVE EXIT CHAN.
53 V ideo game player to VIDEO INPUT MENU ADJUST CUSTOM SELECT PROGRAM CHANNELS LANGUAGE LOCK CLOSED CAPTION VIDEO SET UP EXIT PAGE ACTION VIDEO PAGE 4 / 4 SELECT SDTV HDTV 480p COLOR MATRIX EXIT CHANGE VIDEO 1 GAME VIDEO 2 GAME Ex: When VIDEO INPUT 2 is selected.
54 Press to select VIDEO. Press to display the VIDEO screen. Optimizing display for DVC recording mode (DVC PLA YBACK MODE) When digital video camera recording is in FRAME, images will have high resolution.
55 VIDEO PAGE 2 / 4 SELECT OFF ON TV GAME SCAN MODE ID-1 EXIT CHANGE OFF ON 3D Y/C FILTER Press to select 3D Y/C FIL TER. Notes: • The VIDEO menu is made up of 4 pages. Use the up and down buttons to change pages. • Not available for COMPONENT VIDEO 1-2.
56 VIDEO PAGE 2 / 4 SELECT OFF ON TV GAME SCAN MODE ID-1 EXIT CHANGE OFF ON 3D Y/C FILTER Automatically changing screen size for VIDEO INPUT modes If the received signal contains screen size specifications in VIDEO INPUT (1-4) or COMPONENT VIDEO INPUT (1-2), the screen size is automatically changed.
57 Press the MENU button to display the MENU screen and select SETUP . Note: The VIDEO screen consists of 4 pages. Use the up and down buttons to change pages. Cancelling automatic enlarging of screen CH VOL VOL CH ACTION Used for viewing 4:3 images in Panasonic auto mode.
58 CH VOL VOL CH ACTION Press to select 480p COLOR MA TRIX. Note: Use the up and down buttons to change pages. Setting when 480p signals (sequential scan) are inp u t through COMPONENT VIDEO INPUT Dis.
59 MENU ADJUST CUSTOM SELECT PROGRAM CHANNELS LANGUAGE LOCK CLOSED CAPTION VIDEO SET UP EXIT PAGE ACTION VIDEO PAGE 3 / 4 SELECT NORMAL JUST VIDEO INPUT LABEL Panasonic AUTO 4:3 EXIT GEOMAGNETIC CORRECT ACTION Geomagnetic correction (Adjusting skewing of images) This correction is made when moving the TV set or when image is slightly skewing.
60 Switching languages for display 1 MENU ADJUST CUSTOM SELECT PROGRAM CHANNELS LANGUAGE LOCK CLOSED CAPTION VIDEO SET UP EXIT PAGE ACTION LANGUAGE EXIT CHANGE LANGUAGE Press to select preferred language. 2 Press to exit menu. MENU Press the MENU button to display the MENU screen and select SETUP .
61 Operating peripheral equipment using the remote control Programming The Illuminated Remote Control Using Access Codes The remote control can be preset for other manufacturers, by utilizing the REMOTE MODE SELECTION BUTTONS for CABLE, DTV , VCR, RCVR (a Receiver or Amplifier ), DVD ( DVD, CD, LD ) , DBS and AUX (for Cassette Player or a VCR2 .
62 LIGHT ASPECT MUTE TV/VIDEO MENU INFO/RECALL A V-ADJ NORMAL GAME RH-SPLIT EXIT VCR REC GUIDE REW SEARCH STOP PLA Y SPLIT FF FREEZE TV/VCR SLOW SWAP P AUSE OPEN/CLOSE VCR/DBS CHANNEL STILL R-TUNE PROG VCR DVD TV DTV AUX RCVR CBL DBS ACTION CH VOL VOL CH 123 456 789 0 POWER 2.
63 Operating peripheral equipment using the remote control Infrared Codes Index The remote control is capable of operating many brands of peripheral equipment. Refer to pages 61 and 62 for programmingprocedures. Note: The remote control memory is limited and therefore some models may not operate.
64 CABLE CONVERTER BOX AND DVD, CD, LD PLA YERS Infrared Codes Index CBL Maker ABC ARCHER CABLEVIEW CITIZEN CURTIS DIAMOND EAGLE EASTERN GCBRAND GEMINI GENERAL INSTRUMENT/JERROLD HAMLIN HIT ACHI MACOM MEMOREX MOVIETIME OAK P ANASONIC PHILIPS PIONEER Set Up No.
65 CASSETTE PLA YERS, RECEIVERS, AMPLIFIERS, and DBS Infrared Codes Index AUX Maker P ANASONIC Set Up No. 700, 730 Maker TECHNICS Set Up No. 700, 730 Maker List (T APE) Operating peripheral equipment .
66 Remote Control Quick Reference Functional Key Control KEY MODE TV , DTV , VCR AUX (VCR2) CABLE, DBS RCVR (Receiver/Amplifier) DVD (DVD, CD, LD) TV ALL COMPONENTS TV , VCR, DBS, DTV CABLE DVD RCVR (.
67 Remote Control Quick Reference Functional Key Control KEY MODE TV CABLE DBS DVD (DVD) DVD (CD) DVD (LD) DTV AUX (T ape Cassette Player) TV CABLE DBS DTV DVD TV , CBL VCR DBS DTV DVD (DVD) DVD (CD) .
68 Remote Control Quick Reference Functional Key Control KEY MODE TV DBS DTV (STB) VCR CABLE DBS DVD (DVD) DVD (CD) DVD (LD) RCVR VCR CABLE DBS DVD (DVD) DVD (CD) DVD (LD) RCVR TV TV TV DBS DVD RCVR T.
69 T roubleshooting During normal broadcast (VHF/UHF) Symptoms Power does not turn ON Remote control does not function Image shakes Image is not clear Color patches or no color Image appears doubled or tripled. Spots appear in images, images shake, or color patches appear in the four corners.
70 During normal broadcast (VHF/UHF) Symptoms Image is skewed Channel number remains displayed. The TV set makes a cracking sound Checks • This could be a geomagnetic effect. (If installed facing south, then image slants down to the right; when facing north, slants down to the left.
71 Specifications Power Source AC 120 V , 60 Hz Power Consumption Average use : 193.7 W (Maximum Current 3.7 A) Stand-by condition : 0.36 W Dimensions ( W × D × H ) 34.4 ” (874 mm ) × 23.1 ” (585 mm) × 25.1 ” (637 mm) CRT 34-inch, 16 : 9 aspect ratio Screen Size 29.
Customer ’ Record The model number and serial number of this product can be found on its back cover . Y ou should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic CT 34WX50 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic CT 34WX50 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic CT 34WX50 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic CT 34WX50 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic CT 34WX50 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic CT 34WX50 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic CT 34WX50 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic CT 34WX50. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic CT 34WX50 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
