Benutzeranleitung / Produktwartung P2B-DS des Produzenten Asus
Zur Seite of 74
R P2B-D / P2B-DS Dual Pentium ® II Motherboards USER’S MANUAL Special Features • P2B-DS • Adaptec 7890 SCSI Chipset • Adaptec 3860 SCSI T ransceiver.
ASUS P2B-D/P2B-DS User ’ s Manual 2 USER'S NOTICE Product Name: ASUS P2B-D/P2B-DS Manual Revision: 1.03 E253 Release Date: August 1998 No part of this manual, including the products and softwar.
ASUS P2B-D/P2B-DS User’ s Manual 3 ASUS CONT ACT INFORMA TION ASUST eK COMPUTER INC. Marketing Address: 150 Li-T e Road, Peitou, T aipei, T aiwan 112 T elephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.com.tw T echnical Support Fax: +886-2-2895-9254 BBS: +886-2-2896-4667 Email: tsd@asus.
ASUS P2B-D/P2B-DS User ’ s Manual 4 CONTENTS I. INTRODUCTION 7 How this Manual is Or ganized ........................................................... 7 Item Checklist ...............................................................................
ASUS P2B-D/P2B-DS User’ s Manual 5 CONTENTS Power Management Setup ........................................................... 49 Details of Power Management Setup .................................... 49 PNP and PCI Setup ...........................
ASUS P2B-D/P2B-DS User ’ s Manual 6 FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15.
ASUS P2B-D/P2B-DS User’ s Manual 7 How this Manual is Organized This manual is divided into the following sections: I. Intr oduction Manual information and checklist II. Featur es Information and specifications III. Installation Setting up the motherboard.
8 ASUS P2B-D/P2B-DS User’ s Manual Features The ASUS P2B- D/P2B- DS motherboards are carefully designed for the demanding PC user who wants advanced features processed by the fastest CPU. • Multi-Speed: Supports Dual Intel Pentium ® II processors from 23 3MHz to 450MHz.
ASUS P2B-D/P2B-DS User’ s Manual 9 The ASUS P2B-D/P2B-DS Motherboard II. FEA TURES II. FEA TURES Motherboard Parts T : USB Port 1 B: USB Port 2 COM 2 (Bottom) Programmable 2Mbit Flash ROM 4PCI Slots.
10 ASUS P2B-D/P2B-DS User’ s Manual III. INST ALLA TION ASUS P2B-D/P2B-DS Motherboard Layout PWR_F AN FS0 FS1 FS2 USB PS/2 35 34 68 35 34 68 R Wake-On-LAN Hardware Monitor BF3 BF2 BF1 BF0 S82093AA C.
ASUS P2B-D/P2B-DS User’ s Manual 11 III. INST ALLA TION Jumpers 1) CLR TC p . 13 Clear Real T ime Clock (R TC) RAM 2) KBPWR p. 13 Keyboard Power Up (Enable/Disable) 3) FS0, FS1, FS2 p. 14 CPU Bus Frequency 4) CF1, CF2, CF3, CF4 p. 14 CPU Core:Bus Frequency Multiple 5) JP18 p.
12 ASUS P2B-D/P2B-DS User’ s Manual III. INST ALLA TION Jumpers III. INST ALLA TION Installation Steps Before using your computer , you must complete the following steps: 1. Set Jumpers on the Motherboard 2. Install System Memory Modules 3. Install the Central Pr ocessing Unit (CPU) 4.
ASUS P2B-D/P2B-DS User’ s Manual 13 III. INST ALLA TION III. INST ALLA TION Jumpers Jumper Settings 1. Clear Real Time Clock (R TC) RAM (CLR TC) The CMOS RAM is powered by the onboard button cell battery .
14 ASUS P2B-D/P2B-DS User’ s Manual III. INST ALLA TION Jumpers III. INST ALLA TION 3. CPU Bus Fr equency (FS0, FS1, FS2) This option tells the clock generator what frequency to send to the CPU, DRAM, and 440BX AGPset. This allows the selection of the CPU’ s External frequency (or BUS Clock ).
ASUS P2B-D/P2B-DS User’ s Manual 15 5. Chassis Intrusion Sensor Setting (JP18) (optional/reserved) This allows you to disable or enable the chassis intrusion sensor . Set to Enable if you want to use this function to monitor intrusion into your computer , for ex- ample, when the drive bay doors are opened.
16 ASUS P2B-D/P2B-DS User’ s Manual (This page was intentionally left blank.).
ASUS P2B-D/P2B-DS User’ s Manual 17 2. System Memory (DIMM) This motherboard uses o nly Dual Inline Memory Modules (DIMMs). Three sockets are available for 3.3V olt (power level) unbuf fered Synchronous Dynamic Random Access Memory (SDRAM) of either 8, 16, 32, 64, 128, or 2 56MB to form a memory size between 8MB an d 1G B.
18 ASUS P2B-D/P2B-DS User’ s Manual System Memory III. INST ALLA TION III. INST ALLA TION DIMM Memory Installation Procedures Insert the module(s) as shown. Because the number of pins is dif ferent on either side of the breaks, the module will only fit in the orientation as shown.
ASUS P2B-D/P2B-DS User’ s Manual 19 3. Central Processing Unit (CPU) This motherboard provides two Single Edge Contact (SEC) slots for Pentium II processors packaged in SEC cartridges.
20 ASUS P2B-D/P2B-DS User’ s Manual III. INST ALLA TION CPU III. INST ALLA TION Installing the Pentium II Pr ocessor 1. Connect the Heat Sensor Cable to JP4/JP5 (optional): If you purchased the spec.
ASUS P2B-D/P2B-DS User’ s Manual 21 III. INST ALLA TION CPU III. INST ALLA TION 4. Mount the Heatsink: Place the SEC cartridge face down on a flat surface and lay the heatsink flush on the back (metal side) of the SEC cartridge. Be sure that the heatsink is firmly pressed against the SEC cartridge.
22 ASUS P2B-D/P2B-DS User’ s Manual III. INST ALLA TION CPU III. INST ALLA TION 5. Insert the SEC Cartridge: Push the SEC cartridge’ s two locks inward until you hear a click (the preceding picture shows the locks in the outward position and inward in the picture below).
ASUS P2B-D/P2B-DS User’ s Manual 23 III. INST ALLA TION Recommended Heatsinks The recommended heatsinks for the Pentium II processor are those with three-pin fans that can be connected to the CPU fan connector on the motherboard.
24 ASUS P2B-D/P2B-DS User’ s Manual III. INST ALLA TION Expansion Cards III. INST ALLA TION W ARNING! Unplug your power supply when adding or removing expansion cards or other system components. Failure to do so may cause severe damage to both your motherboard and expansion cards.
ASUS P2B-D/P2B-DS User’ s Manual 25 III. INST ALLA TION T o simplify this process, this motherboard complies with the Plug and Play (PnP) specification, which was developed to allow automatic system configuration when- ever a PnP-compliant card is added to the system.
26 ASUS P2B-D/P2B-DS User’ s Manual III. INST ALLA TION Connectors III. INST ALLA TION 5. External Connectors IMPOR T ANT : Ribbon cables should always be connected with the red stripe on the Pin 1 side of the connector . The four corners of the connectors are labeled on the motherboard.
ASUS P2B-D/P2B-DS User’ s Manual 27 III. INST ALLA TION 3. Parallel Printer Connector (25-pin Female) Y ou can enable the parallel port and choose the IRQ through “Onboard Parallel Port” in Chipset Features Setup of the BIOS SOFTW ARE. NOTE : Serial print- ers must be connected to the serial port.
28 ASUS P2B-D/P2B-DS User’ s Manual Connectors III. INST ALLA TION III. INST ALLA TION 6. Universal Serial BUS Ports 1 & 2 (T wo 4-pin Female) T wo USB ports are available for connecting USB devices.
ASUS P2B-D/P2B-DS User’ s Manual 29 III. INST ALLA TION 8. Hard Disk Activity LED (2-pin IDELED) This connector supplies power to the cabinet’ s hard disk or IDE activity LED. Read and write activity by devices connected to the Primary or Secondary IDE connectors will cause the LED to light up.
30 ASUS P2B-D/P2B-DS User’ s Manual Connectors III. INST ALLA TION 10. IrDA-Compliant infrar ed module connector (5-pin IR) This connector supports the optional wireless transmitting and receiving infrared module. This module mounts to a small opening on system cases that support this feature.
ASUS P2B-D/P2B-DS User’ s Manual 31 III. INST ALLA TION Connectors III. INST ALLA TION 12. W ake-On-LAN (3-pin WOL) This connector connects to LAN cards with a W ake-On-LAN output, such as the AUS PCI-L101 (see section VII. ASUS LAN Card) . The connector powers up the system when a wakeup packet or signal is received through the LAN card.
32 ASUS P2B-D/P2B-DS User’ s Manual Connectors III. INST ALLA TION III. INST ALLA TION 14. LED Lead (MSG.LED) This indicates whether a message has been received from a fax/modem. The LED will remain lit when there is no signal and blink when there is data transfer or waiting in the inbox.
ASUS P2B-D/P2B-DS User’ s Manual 33 III. INST ALLA TION Connectors III. INST ALLA TION 21. Fast (50 pins)/Wide (68 pins)/Ultra2 (68 pins) SCSI Connectors This motherboard has onboard 50-Pin Fast SCS.
34 ASUS P2B-D/P2B-DS User’ s Manual 22. SB-Link™ Connector (6-1 pin DMA_HEADER) (optional/r eserved) Using Intel’ s PC-PCI and serialized IRQ protocols found in this motherboard’ s AGPset, thi.
ASUS P2B-D/P2B-DS User’ s Manual 35 III. INST ALLA TION Power Connections III. INST ALLA TION Power Connection Procedures 1. After all jumpers and connections are made, close the system case cover . 2. Be sure that all switches are of f (in some systems, marked with ).
ASUS P2B-D/P2B-DS User ’ s Manual 36 IV . BIOS Flash Memory Writer IV . BIOS SOFTW ARE Flash Memory W riter Utility This motherboard has an onboard SCSI BIOS and boot virus protection and therefore, re- quires a 2Mbit flash ROM.
ASUS P2B-D/P2B-DS User’ s Manual 37 IV . BIOS Flash Memory Writer IV . BIOS SOFTW ARE When prompted to confirm the BIOS update, press Y to start the update.
ASUS P2B-D/P2B-DS User ’ s Manual 38 IV . BIOS Updating BIOS IV . BIOS SOFTW ARE Managing and Updating Y our Motherboard’ s BIOS Upon First Use of the Computer System 1. Create a bootable system floppy disk by typing [FORMA T A:/S] from the DOS prompt without creating “AUT OEXEC.
ASUS P2B-D/P2B-DS User’ s Manual 39 IV . BIOS SOFTW ARE 6. BIOS Setup IV . BIOS BIOS Setup The motherboard supports two programmable Flash ROM chips: 5-V olt and 12- V olt. Either of these memory chips can be updated when BIOS upgrades are re- leased.
ASUS P2B-D/P2B-DS User ’ s Manual 40 IV . BIOS SOFTW ARE IV . BIOS Standard CMOS Load Defaults The “Load BIOS Defaults” option loads the minimum settings for troubleshooting. “ Load Setup Defaults ”, on the other hand, is for loading optimized defaults for regular use.
ASUS P2B-D/P2B-DS User’ s Manual 41 IV . BIOS SOFTW ARE IV . BIOS Standard CMOS T ime T o set the time, highlight the “T ime” field and then press either <Page Up>/<Page Down> or <+>/<–> to set the current time. Follow the hour , minute and second format.
ASUS P2B-D/P2B-DS User ’ s Manual 42 IV . BIOS SOFTW ARE IV . BIOS Standard CMOS Auto detection of hard disks on bootup For each field: Primary Master , Primary Slave, Secondary Master , and Secondary Slave, you can select Auto under the TYPE and MODE fields.
ASUS P2B-D/P2B-DS User’ s Manual 43 IV . BIOS SOFTW ARE IV . BIOS BIOS Features BIOS Features Setup The “BIOS Features Setup” option consists of configuration entries that allow you to improve your system performance, or let you set up some system features accord- ing to your preference.
ASUS P2B-D/P2B-DS User ’ s Manual 44 IV . BIOS SOFTW ARE IV . BIOS BIOS Features CPU Level 1 Cache / CPU Level 2 Cache (Enabled) These fields allow you to choose from the default of Enabled or choose Disabled to turn on or off the CPU’ s Level 1 and Level 2 built-in cache.
ASUS P2B-D/P2B-DS User’ s Manual 45 IV . BIOS SOFTW ARE IV . BIOS BIOS Features Security Option (System) When you specify a Supervisor Passwor d and/or User Passwor d (explained later in this section), the Security Option field determines when the system prompts for the password.
ASUS P2B-D/P2B-DS User ’ s Manual 46 IV . BIOS SOFTW ARE IV . BIOS Chipset Features Chipset Features Setup The “Chipset Features Setup” option controls the configuration of the board’ s chipset. NOTE: SETUP Defaults are noted in parenthesis next to each function heading.
ASUS P2B-D/P2B-DS User’ s Manual 47 IV . BIOS SOFTW ARE IV . BIOS Chipset Features 16-bit I/O Recovery T ime (1 BUSCLK) / 8-bit I/O Recovery T ime (1 BUSCLK) T iming for 16-bit and 8-bit ISA cards, respectively . Leave on default setting. Graphics Aperture Size (64MB) Memory-mapped, graphics data structures can reside in a Graphics Aperture.
ASUS P2B-D/P2B-DS User ’ s Manual 48 IV . BIOS SOFTW ARE Onboard FDC Swap A & B (No Swap) This field allows you to reverse the hardware drive letter assignments of your floppy disk drives. T wo options are available: No Swap and Swap AB . If you want to switch drive letter assignments through the onboard chipset, set this field to Swap AB .
ASUS P2B-D/P2B-DS User’ s Manual 49 IV . BIOS SOFTW ARE IV . BIOS Power Management Power Management Setup This “Power Management Setup” option allows you to reduce power consumption. This feature turns of f the video display and shuts down the hard disk after a period of inactivity .
ASUS P2B-D/P2B-DS User ’ s Manual 50 IV . BIOS SOFTW ARE IV . BIOS Power Management V ideo Off Method (DPMS OFF) This field defines the video off features. The following options are available: DPMS OFF , DPMS Reduce ON , Blank Scr een , V/H SYNC+Blank, DPMS Standby , and DPMS Suspend .
ASUS P2B-D/P2B-DS User’ s Manual 51 IV . BIOS SOFTW ARE IV . BIOS Power Management PWR Up On Modem Act (Enabled) This allows either settings of Enabled or Disabled for powering up the computer (turns the A TX power supply on) when the modem receives a call while the computer is Soft-of f.
ASUS P2B-D/P2B-DS User ’ s Manual 52 IV . BIOS SOFTW ARE Plug & Play / PCI IV . BIOS PNP and PCI Setup The “PNP and PCI Setup” option configures the PCI bus slots. All PCI bus slots on the system use INT A#, thus all installed PCI cards must be set to this value.
ASUS P2B-D/P2B-DS User’ s Manual 53 IV . BIOS SOFTW ARE IV . BIOS Plug & Play / PCI DMA x Used By ISA (No/ICU) These fields indicate whether or not the displayed DMA channel for each field is being used by a legacy (non-PnP) ISA card. A vailable options include: No/ICU and Ye s .
ASUS P2B-D/P2B-DS User ’ s Manual 54 IV . BIOS SOFTW ARE Load Defaults IV . BIOS Load BIOS Defaults The “Load BIOS Defaults” option allows you to load the troubleshooting default values permanently stored in the BIOS ROM. These default settings are non-opti- mal and disable all high performance features.
ASUS P2B-D/P2B-DS User’ s Manual 55 IV . BIOS SOFTW ARE Supervisor Password and User Password These two options set the system passwords. “Supervisor Password” sets a pass- word that will be used to protect the system and the Setup utility; “User Password” sets a password that will be used exclusively on the system.
ASUS P2B-D/P2B-DS User ’ s Manual 56 IV . BIOS SOFTW ARE IV . BIOS Hard Disk Detect IDE HDD Auto Detection This “IDE HDD Auto Detection” option detects the parameters of an IDE hard disk drive, and automatically enters them into the Standard CMOS Setup screen.
ASUS P2B-D/P2B-DS User’ s Manual 57 IMPOR T ANT : If your hard disk was already formatted on an older previous system, incorrect parameters may be detected. Y ou will need to enter the correct parameters manually or use low-level format if you do not need the data stored on the hard disk.
ASUS P2B-D/P2B-DS User ’ s Manual 58 V . SUPPORT S/W ASUS Smart Motherbaord V . SUPPOR T SOFTW ARE ASUS Smart Motherboard Support CD Inserting the support CD brings up a selection menu described as follows: NOTE: CD version and contents are subject to change at any time without notice.
ASUS P2B-D/P2B-DS User’ s Manual 59 VI. DESKT OP MANAGEMENT Desktop Management Interface (DMI) Introducing the ASUS DMI Configuration Utility This motherboard supports DMI within the BIOS level and provides a DMI Con- figuration Utility to maintain the Management Information Format Database (MIFD).
ASUS P2B-D/P2B-DS User ’ s Manual 60 VI. DMI Using DMI Utility VI. DESKT OP MANAGEMENT Using the ASUS DMI Configuration Utility NOTE: The following screen displays are provided as examples only and may not reflect the screen contents on your system.
ASUS P2B-D/P2B-DS User’ s Manual 61 VI. DESKT OP MANAGEMENT Save MIFD Y ou can save the MIFD (normally only saved to flash ROM) to a file by entering the drive and path here. If you want to cancel save, you may press ESC and a message “Bad File Name” appears here to show it was not saved.
ASUS P2B-D/P2B-DS User ’ s Manual 62 (This page was intentionally left blank.).
ASUS P2B-D/P2B-DS User’ s Manual 63 VII. ASUS LAN Card ASUS PCI-L101 Fast Ethernet Card LAN Activity Output Signal RJ45 LEDs Motherboard type Wake on LAN Output Signal ASUS Other Intel Chipset If you are using the ASUS PCI-L101 on an ASUS motherboard, leave the jumper on its defaut setting of “ASUS.
64 ASUS P2B-D/P2B-DS User’ s Manual VII. ASUS LAN Card Features • Intel 82558 Ethernet LAN Controller (Fully integrated 10BASE-T/100BASE-TX) • W ake-On-LAN Remote Control Function Supported • PCI Bus Master Complies to PCI Local Bus Rev . 2.1 specifications • Consists of MAC & PHY (10/100Mbps) interfaces • Complies to IEEE 802.
ASUS P2B-D/P2B-DS User’ s Manual 65 VIII. SCSI SELECT Configuring SCSI VIII. ADAPTEC SCSI SELECT Configuring the SCSI Adapter Access the SCSI BIOS by holding down both CTRL and A keys when you see the BIOS banner message listing the driver name and the attached devices.
66 ASUS P2B-D/P2B-DS User’ s Manual (This page was intentionally left blank.).
ASUS P2B-D/P2B-DS User’ s Manual 67 IX. ADAPTEC EZ-SCSI IX. EZ-SCSI UTILITY Intro/Quick Start W elcome to Adaptec EZSCSIVI, ADAPTEC EZ-SCSI UTILITY 4.03. Adaptec EZSCSI gives you what you need to use DOS, W indows ® 3.1x, or W indows for W orkgroups3.
68 ASUS P2B-D/P2B-DS User’ s Manual IX. EZ-SCSI UTILITY T roubleshooting IX. ADAPTEC EZ-SCSI T roubleshooting T ips SCSI Device T roubleshooting Review this checklist if your newly-installed SCSI di.
ASUS P2B-D/P2B-DS User’ s Manual 69 IX. ADAPTEC EZ-SCSI IX. EZ-SCSI UTILITY T roubleshooting If the name of your SCSI chipset does not appear , you may be able to find its miniport driver on the W indows95 CD-ROM. Follow these steps: 1 Place the W indows95 CD-ROM in your CDROM drive and run the Add New Hardware wizard.
70 ASUS P2B-D/P2B-DS User’ s Manual IX. ADAPTEC EZ-SCSI IX. EZ-SCSI UTILITY T roubleshooting If I am running under Windows95, do I need lines for the Adaptec r eal mode ASPI drivers and mscdex in my CONFIG.
ASUS P2B-D/P2B-DS User’ s Manual 71 IX. ADAPTEC EZ-SCSI IX. EZ-SCSI UTILITY DOS/Win Info. Information for DOS/Windows 3.1x Users The following information may be useful if you install Adaptec EZSCSI on a com- puter running DOS, W indows 3.1x, or W indows for W orkgroups3.
72 ASUS P2B-D/P2B-DS User’ s Manual IX. ADAPTEC EZ-SCSI IX. EZ-SCSI UTILITY Formatting DOS Formatting Utilities Adaptec EZSCSI includes several DOS-based formatting utilities: Low-level Formatter (s.
ASUS P2B-D/P2B-DS User’ s Manual 73 IX. ADAPTEC EZ-SCSI IX. EZ-SCSI UTILITY Partitioning Formatter and Partitioner (afdisk) Use the DOS-based afdisk utility to partition and format SCSI hard disk drives, Floptical drives, and magneto-optical drives.
74 ASUS P2B-D/P2B-DS User’ s Manual IX. ADAPTEC EZ-SCSI IX. EZ-SCSI UTILITY Partitioning 3. T o create a new partition on the disk device, press Ins.
Ein wichtiger Punkt beim Kauf des Geräts Asus P2B-DS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Asus P2B-DS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Asus P2B-DS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Asus P2B-DS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Asus P2B-DS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Asus P2B-DS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Asus P2B-DS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Asus P2B-DS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Asus P2B-DS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
