Benutzeranleitung / Produktwartung AW-HE2E des Produzenten Panasonic
Zur Seite of 57
until 2012/1 1/9 Operating In structions <Operations and Se ttings> HD Integr ated Ca mera Model No. AW - H E 2 P AW - H E 2 E Please rea d these instruc tions carefully bef ore using this product , and save this manual fo r future use. This manual de scribes the operatio ns of the unit in det ail.
- 2 - Conte nt s Read this fi rst! ... ........ ......... ........... ........ .... 3 Contro ller .. ......... ........ ......... ........ ........ ....... 4 Operations available using the co ntrolle r .... ........ ........ ......... ........ .... 4 Names and Funct ions of Main Parts .
- 3 - ∫ St arting t he web setting scree n (Live scree n/Setup screen) For the syst em requirement s and the startup of the web setting scree n, please refer to “Operatin g Instructions <Basic s>”. ∫ Regarding photo s and illustrations in this manual Please not e that product pro file sketches, illus trations, menu s creens, etc.
- 4 - This unit can be ope rated using a contr oller (AW -RP50: option al). Operations availa ble using the controller The contro ller (AW -RP50) can perform the foll owing operations.
- 5 - 7 PRESET MEMOR Y/MENU buttons Calls up t he preset menu or controller men u. 8 LCD p anel 9 F1 dial Operates the camera menu or controll er menu of the un it. 10 CAMERA OSD button ( l 10) Displays th e camera menu of the unit. 1 1 F2 di al Operates t he controller menu.
- 6 - Y ou can t urn on th e unit or set it t o standby mode on the web se tting scr een or by the wireless remot e controller or the controller . ≥ When the AC adapt er is connected , the unit is aut omatically set to st andby mode an d the status display lamp of the unit lig hts orange.
- 7 - Operating using the controller ∫ Operat e each unit 1 Hold down CAMERA ST A T US/SELECTIO N button 1 to 5. ≥ The upper row of th e LCD panel displays the camer a name, and the lower row display s [POW ER ON] or [POW ER OFF ].
- 8 - (when oper ating selected group s) T urn the F2 dial to s elect [GROUP ON] or [GROUP OF F], and press the F2 dial. ∫ Switch to S t andby Mode With t he USER Button Register ing [POWER O FF] to t he USER but tons (USER1, USER2) and holding down t he USER button will switch all co nnected cameras to St andby mode.
- 9 - Y ou can operate the camer a menu of the unit with t he wireless remote cont roller or the controller . The menu screen is dis played on the HDMI output monit or . Operating us ing the wireless rem ote controller 1 Pr ess one of the CA M1 to CAM4 butto ns to select a c amera.
- 10 - 6 Pr ess the 3 / 4 / 2 / 1 buttons to select [EXIT] and press the enter button to com plete the menu s ettings. ≥ The MENU button c an also be pressed to complet e the menu setti ngs. T o get back to th e previous screen Select [ ] and then pre ss the enter butt on.
- 1 1 - 5 R otate the F1 dial to sele ct each item and press the F1 dial to set it. 6 Pres s and hold the CAMERA O SD button for 2 seconds to complete the menu s ettings. ≥ T urn the F1 dial and sele ct [EXIT], and pre ss the F1 dial to complete t he menu settings.
- 12 - ∫ About the zo om ≥ The i.Zoom can magn ify up to approximat ely twice as large as the natu ral size while the digita l zoom can magnify u p to four times as l arge as t he natural size. (i.Zoom: This zoo m fun ction allows you to maint ain high-defini tion picture quality .
- 13 - Operating us ing the wireless rem ote controller Zoom operations ZOOM button T button : Close-up re cording (zoom in) W button : W ide-angle r ecording (zoom out) F AST button/ SLOW button Press the F AST bu tton to increase t he zoom s peed, and press th e SLOW button to decre ase the speed .
- 14 - Operating using the controller Press the ZOOM button . TELE side : Close-up rec ording (zoom in) WIDE side : Wi de-ang le r ecord ing (zoom out) ≥ The zooming s peed changes depend ing on the extent to which the button is pressed. ≥ Hold do wn the PT ACT IVE button to light up th e but ton.
- 15 - When colora tion (white balance) is unna tural due to a light source or the like, set it manually . ≥ This adjustmen t must be performed when us ing the unit for the fi rst time or when the unit has not bee n used for a prolonge d period. ≥ It must be performe d when the lighting condit ions or brightn ess has changed.
- 16 - 3 C lick the [Image ] tab on th e Image screen. 4 Clic k [Setup] (Imag e adjust). ≥ The Image adjus t screen opens in a sep arate window . 5 Sele ct your desire d [A WB Mod e]. ≥ Select a suit able mode by looking at t he coloration on the s creen.
- 17 - Operating us ing the wireless rem ote controller Select the m enu. ( l 9) ∫ Performing the W hite Balance Settin g 1 Set the mode to either [A WB A] or [A WB B]. ≥ After se tting the mode, end the ca mera menu. 2 Fi ll the scre en wit h a whit e subje ct.
- 18 - ∫ Set the whit e balance 1 Set the mode to either [A WB A] or [A WB B]. 2 Fi ll the scre en wit h a whit e subje ct. ≥ Do not shoot shiny or very bright objec ts. 3 T urn the F2 dial to select [A WB], and press the F2 dial. ≥ When [OSD Status ] is set t o [On ], [AWB OK] i s displ ayed on the screen an d adju stment is completed.
- 19 - Adjust the br ightness of the imag e. This unit can be us ed by switching bet ween auto mode and manual mode. Auto mode: Brightne ss is adjust ed automatica lly to suit the area of shooting. Manual mode: Adjust the br ightness when t aking images in area s that are too bright (or too dark).
- 20 - Operating using the controller The unit switches between auto mode and manual mod e each time the IRIS-AUTO button is pressed. ≥ Auto mode is on when t he IRIS-AUTO but ton lights up, and manual mode is on when it turns o ff. IRIS dial : The image becomes dark er when rotati ng the dial toward A in manual mode.
- 21 - Y ou can c ut a porti on of a camera image and display s it on a small sc reen (PinP: Picture i n Picture ) in the main screen. ≥ Y ou can change the PinP ret rieval position, perform zoom operation s for a PinP image, and ch ange the P inP displ ay positi on.
- 22 - Switching the Control Mode Y ou can switch the contr ol mode to main screen or PinP while a PinP image is displaye d. Main screen control mode: Y ou can o perate the main screen (zoom, p an/tilt). PinP control m ode: Y ou can change the Pi nP retrieval posit ion, and perform zo om operations fo r a PinP image.
- 23 - Changing the PinP Retrieval Position ≥ Set the control mode to PinP . ( l 22) 1 O pen the Live scr een. 2 Clic k or drag the co ntrol pad/ buttons. ≥ The op eration meth od is the same as the pan/tilt o perations. ( l 12) ≥ The PinP retr ieval frame moves and th e retrieval pos ition changes.
- 24 - Zooming in and out on a PinP image ≥ Set the control mode to PinP . ( l 22) 1 O pen the Live scr een. 2 O perate the zo om buttons. ≥ The operation s are the same as the main screen zoom opera tions.
- 25 - Changing the PinP Display Position Y ou can c hange the PinP displa y positio n to the Upp er Right , Lower Right , Uppe r Lef t , or Lower Lef t area of the main screen . 1 O pen the Live scr een. 2 Pull down [PinP Position ] and selec t your desir ed display pos ition.
- 26 - Y ou can save desi red settings to t he preset memory and call th em when needed. (Up to 9) ≥ Y ou can save the following settings: j Zoom level j Contrast j PinP display/non-disp lay j P inP.
- 27 - Operating us ing the wireless rem ote controller Press on e of the buttons 1 to 9 while pr essing the PRESET button. ≥ The curre nt settings a re registere d in the pr eset memory .
- 28 - Y ou can configu re the unit’ s setting s on web setting sc reen (the Setu p screen)/ca mera menu. 1 O pen the S etup screen. 2 T o op en your desire d screen, click o ne of the opti ons A to E . A Basic s creen (Basic s ettings) ( l 29) B Image screen (Pic ture quality setti ngs, System sett ings) ( l 30) C User mng.
- 29 - Basic scr een Ente r the n ame of the unit, and clic k [Set ]. ≥ Y o u can en ter up to 20 singl e-byt e chara cters. ≥ Y o u can en ter the follow ing ch aracte rs: ≥ The ente red name appears on the ca mera title p art at the top of the web sett ing screen.
- 30 - Image scree n Y ou can adjust the pi cture quality , save preset memori es, configure t he system settings, etc.. A [Im age] tab B [Sys tem] tab C Camera image (when a t ally light-up sig nal i.
- 31 - 1 C lick the [Image ] tab on th e Image screen. 2 Clic k [Setup] (Imag e adjust). ≥ The Image adjus t screen opens in a sep arate window . Adjust the contrast . Click [ _ ] and [ ` ] to adjust the level. ∫ Setting Using th e Camera Menu 1 Select the menu.
- 32 - Y ou can a djust the colo r depth. Click [ _ ] and [ ` ] to adjust the level. ∫ Setting Using th e Camera Menu 1 Select the menu. 2 Adjust the level. ( l 10, 1 1) 3 (When perfor ming the operations us ing the wireless remote con troller) Press t he enter bu tton A .
- 33 - This makes the image bri ghter to preven t darkening of a backlit su bject. ∫ Setting Using th e Camera Menu 1 C lick the [Image ] tab on th e Image screen. 2 Clic k [Setup] (Preset posi tion). ≥ The Preset position screen op ens in a separa te window .
- 34 - Click the [System] t ab on the Im age screen. ≥ The System scre en opens. ≥ Afte r changing settin gs, click [Set]. Y ou can c hange the resolution of the HDMI output. * When [System Frequ ency] is [59.94Hz( NTSC)], you can sel ect [480p], and when it is set to [50Hz(P AL)], you can s elect [576p].
- 35 - The down-conv ersion mode is select ed here. ≥ Only e nabled when [ Format] is [480p (576p )]*. * When [System Frequ ency] is [59.94Hz( NTSC)], you can sel ect [480p], and when it is set to [50Hz(P AL)], you can s elect [576p].
- 36 - Y ou can enabl e/disable t he digit al zoom (zoom level maximum: k 4). ∫ Setting Using th e Camera Menu ≥ The larger the dig ital zoom magnif ication, th e more the image quality is degraded. “Enable” or “Disable” is set here for the fun c tion which turns on/ t urns off t he tally lamp using the ta lly control signal.
- 37 - User m ng. scree n Y ou can register us ers who can access the unit f rom a PC or AW -RP50. ≥ Ent er and set al l of [User name], [P asswo rd], [Ret ype pas sword] an d [Acc ess leve l], and then click [Se t]. Y ou can s et whether to authent icate users when the web setting screen app ears.
- 38 - Y ou can set an authe ntication p assword that a user is asked to enter when th e web setting screen or the S etup scr een appears. Aft er entering a pas sword in the [Password] field, re-e nter the passwo rd in the [Retype passw ord] field to preve nt input errors.
- 39 - Networ k screen Y ou can con figure the network set tings for the unit. ≥ Afte r changing settin gs, click [Set]. Y ou can set whet her to use th e DHCP function. T o p revent computers that d o not use DHCP function an d other network cameras from usin g the same IP address, set t he DHCP server .
- 40 - Input the unit’ s subnet mask here if the DHCP function is not used. ≥ This func tion’s def ault settin g is [255.255.255 .0]. Input the unit ’s defaul t gateway here if the DHCP function is not used. ≥ This func tion’s defaul t setting is [192 .
- 41 - Mainte nance screen Y ou can perform suc h operations as dis playing the unit info rmation, rest oring the unit’ s defa ult settings . A [Informat ion] tab B [Oth er] tab Click the [Inf ormation] t ab on the Ma intenance scree n. ≥ The model number ([Mo del no.
- 42 - Click the [Other] tab on the Maintenance scree n. ≥ The Other scre en opens. Y ou can resto re the unit’s default settin gs. (The settings for the Network scr een, the User mng. screen and th e system frequen cy do not chan ge) Click [Execu te].
- 43 - Change the imag e displayed on the HDMI out put monitor or the web sett ing screen. Select your desired item a nd click [Execute ]. ≥ Y ou can also swit ch the displ ay between the camera image a nd the color ba rs by pressing the MODE button o n the wireless remote cont roller or t he controller .
- 44 - Setting Using the Ca mera Menu ≥ The followi ng items can only be set from th e camera menu: Y ou can set whether to show the menu screen and th e status dis play of the White Bala nce Setting when th e unit receives a tal ly light-up sign al.
- 45 - ∫ It is not a m alfunction in follow ing cases T roubleshoot ing Obje ct seems to be warped. ≥ Object seems to be warped slightl y when the object moves ac ross the image very fa st, but this is because the unit is usin g MOS for the image senso r.
- 46 - Wire less remote cont r oller Problem Check p oint s Cannot operate. ≥ Check if the status display lamp is lit green and the unit is turned on . ≥ Before opera ting, select th e unit by pressing on e of t he CAM1 to CA M4 buttons. ≥ When s trong light from a fl uorescent la mp, a plas ma monitor , the sun, etc.
- 47 - Web s etting screen Problem Check p oint s The web setting screen cannot be accessed . ≥ T ur n on th e unit or set i t to Standby m ode. ≥ Check if a valid IP address is set for th e unit. ≥ Aft er changing the IP add ress of the unit, enter [http:/ / Post -change IP a ddress/] i nto the address ba r of the web brow ser .
- 48 - The settings on the web setting screen or the image on the cam era is not updated or displayed properly . ≥ The unit’ s ports may be filtere d by the firewall or other function of the anti-virus software. Change the HTTP port number of th e unit to a port number whic h w i ll not be filtered.
- 49 - Vid eo Problem Check p oint s No pictures are displ ayed or the picture s are disturbed. ≥ Check if the unit is correc tly connected with other devices. ≥ If your sys tem is configured in such a way that a displayed im age is automatically switche d in conjunction with your ca mera selection, s elect the cor rect camera.
- 50 - Prec aution s when u sing a co mput er When using a computer, the symptoms described below ma y occur . If any of the m occurred, fo llow the instructi ons to solve each probl em. (The in structions des cribe solution s for admi nistrators.) ≥ Description s in this document ar e based on o peration c heck by Pa nasonic Corpora tion.
- 51 - 5) E nter [http: // the IP addr ess for the unit /] in [Add this webs ite to the zone:], and c lick [Add]. ≥ Make su re [Require se rver verificatio n (https:) for all sites in this z one] is unchecked.
- 52 - ∫ Easy IP Setup Software does not display the detected IP addres s. Check the fir ewall set tings. If fir ewall is activate d, set the web b rowser or Easy I P Setup Software to the [Al low a program through Windows Firewall] setting. 1) Open the co ntrol panel, and c lick [System and Secur ity].
- 53 - ∫ The [Program Com patibilit y Assist ant] is displa yed afte r exiting the Easy IP Setup Software. This symptom happens only when the sof tw are has been use d for the first time.
- 54 - ∫ The scre ens of the brows er are not disp layed properly . Check the character size of th e screensho t by click ing [Display ] of [Perso nalize].
- 55 - ∫ Screen is deformed. Or when activating the compa tibility view , p art of the scree n is not displaye d or a pop-up wind ow appears to s ay that the sc reen is not d ispl ayed again . Chec k [Displ ay all w ebsites in Compatib ility Vie w] on the [Compatib ility View s ettin gs] screen.
- 56 - Recording of pre-recor ded tapes or di scs or other p ublished or broadcast mate rial for purposes ot her than your own privat e use may infringe co pyright laws. Even fo r the purpo se of private us e, recording of cert ain material may be restric ted.
Web Site: http://panasonic.net © Panasonic Corporation 2012.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic AW-HE2E (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic AW-HE2E noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic AW-HE2E - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic AW-HE2E reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic AW-HE2E erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic AW-HE2E besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic AW-HE2E verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic AW-HE2E. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic AW-HE2E gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
