Benutzeranleitung / Produktwartung AK-HC900P des Produzenten Panasonic
Zur Seite of 33
Before attempting to connect, operate or adjust this product, please read these instructions completely and save this manual for future use. Model AK-HC900P 720P Multi-purpose Digital Camera.
2 FCC Note: This device complies with Part 15 of the FCC Rules. T o assure continued compliance follow the attached instal- lation instructions and do not make any unauthorized modifications. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
3 CONTENTS For Y our Safety ................................ 2 Preface ............................................. 4 Features ........................................... 4 Precautions ...................................... 5 Major Operating Controls and Their Functions .
4 Preface Thank you very much for purchasing the multi-purpose digital camera. New 2/3 q 1 million-pixel CCD is employed. [1280(H) k 720(V)] ≥ 1 million-pixel CCD is 2/3 q in size, being compact and light-weight. The camera section is equipped with a high picture quality digital signal pro- cessing LSI.
5 ≥ Refer any servicing to qualified service personnel. ≥ Handle the camera with care. ≥ Protect the precision made lens by plac- ing the lens cap over when the camera is not in use. If the lens is not installed, pro- tect the surface of the prism by placing the body cap into the lens mount hole.
6 Major Operating Controls and Their Functions _ Front Panel _ T op and Bottom Panels 5 Cooling Fan ≥ Do not block or obstruct the ventilation during operation. It may otherwise cause inter- nal heating or fire. ≥ The life of this fan is approximately 50,000 hours (at room temp.
7 8 Breaker [BREAKER] If the breaker is operated due to over-current or the like, check the cause and eliminate the trouble, then press the breaker button.
8 BREAKER ZOOM/ FOCUS SDI OUT 1 2 1 / F 720 PROGRESSIVE How to Install _ How to set the lens ≥ Standard 2/3 q bayonet type (B4 mount) lens of any makers can be used*. 1 T urn the lens fixing ring knob counterclockwise to remove the lens mount cap. 2 Set the lens in place, and turn the lens fixing ring knob clockwise to precisely fix the lens.
9 O I BREAKER ZOOM/ FOCUS SDI OUT 1 2 1 / F AK-HC900P YPbPr D-sub 15-pin D-sub 15-pin How to Set Up the System (Connection) _ Connection of remote control box ≥ Use multi-cable for the connection of HD controller AK-HRP900 and this unit.
10 O I BREAKER ZOOM/ FOCUS SDI OUT 1 2 1 / F HD-SDI D-sub 15-pin D-sub 15-pin Multi-cable (5m) AK-HDML TCA05 Coaxial Cable (5C-FB) AC Adaptor A W-PS505 HD Controller AK-HRP900* 1 HD Monitor Multi-purp.
11 O I BREAKER ZOOM/ FOCUS SDI OUT 1 2 1 / F G/L I N Pb OUT Pr /SDI OUT Y/VIDEO OUT 1394 CONTROL IN IP/RP DC12V IN CAMERA I/F LENSE I/F ND/EXT SDI IN CS O P O I HD-SDI Pan/Tilt Head Controller A W-RP3.
12 O I BREAKER ZOOM/ FOCUS SDI OUT 1 2 1 / F O I HD-SDI Multi-cable (5m) AK-HDML TCA05 Coaxial Cable (5C-FB) AC Adaptor A W-PS505 DC Power Cable HD Controller AK-HRP900* 1 HD Monitor Remote controllab.
13 O I BREAKER ZOOM/ FOCUS SDI OUT 1 2 1 / F G/L I N Pb OUT Pr /SDI OUT Y/VIDEO OUT 1394 CONTROL IN IP/RP DC12V IN CAMERA I/F LENSE I/F ND/EXT SDI IN CS O P O I O I HD-SDI Multi-cable (5m) AK-HDML TCA.
14 Operation Procedure 1 T urn on the power of each equipment. 2 Properly adjust the light for the ob- ject. 3 Adjust the flange back of the lens, the iris and the focus. ≥ Flange back must be adjusted when the camera is used for the first time or after replacement of the lens.
15 _ Flange back adjustment (for zoom lens) The adjustment is to adjust the focus in all the range from the maximum zoom to the widest angle of the zoom lens. 1 Shoot a dark object to open the iris. 2 Adjust the distance from the object to 6.6 ft. (2 m) at least, then loosen the flange back fixing knob of the lens.
16 _ Color temperature and while balance adjustment (reference) When carbon is burnt, it develops vari- ous colors of light depending on the tem- perature. Natural light can be specified by color temperature reflecting to the color developed when carbon is burnt.
17 H.PHASE H.PHASE-COARSE :03 H.PHASE-FINE :40 °° °° _ Black balance adjustment ≥ Adjust it with the lens closed. When the motor drive lens is controlled from the camera, adjusting the black balance causes the lens to be automatically closed.
18 USER MENU 1.MAINTENANCE 2.SETTING 3.CAM ID 4.FILE MENU MAINTENANCE 1.BLACK SHADING 2.PED,GAMMA,FLARE 3.KNEE,WHITE CLIP 4.R/B GAIN 5.DTL 6.GAIN,AUTO IRIS 7.S.GAIN 1 8.S.GAIN 2 9.S.GAIN 3 10.FRAME MODE 11.COLOR CORRECTION1 12.COLOR CORRECTION2 °° SETTING 1.
19 USER MENU 1.MAINTENANCE 2.SETTING 3.CAM ID 4.FILE MENU Setting of Menu Items _ USER menu (Initial screen) The readout data at start of power supply is the data just before cutting off the power supply , and the operation is started with the data. 1.
20 MAINTENANCE 1.BLACK SHADING 2.PED,GAMMA,FLARE 3.KNEE,WHITE CLIP 4.R/B GAIN 5.DTL 6.GAIN,AUTO IRIS 7.S.GAIN 1 8.S.GAIN 2 9.S.GAIN 3 10.FRAME MODE 11.
21 PED,GAMMA,FLARE M PED :+027 R PED :+000 B PED :+000 M GAMMA :0.45 R GAMMA :+00 B GAMMA :+00 R FLARE :010 G FLARE :000 B FLARE :017 GAMMA :ON FLARE :ON °° °° Setting of Menu Items ! Maintenance menu 2 Pedestal, gamma, flare adjustment menu M PED: Master pedestal can be adjusted only by turning the control panel VR.
22 KNEE,WHITE CLIP M KNEE POINT :95.00% R KNEE POINT :+00.00% B KNEE POINT :+00.00% M KNEE SLOPE :95.00% R KNEE SLOPE :+000 B KNEE SLOPE :+000 A.KNEE POINT :95.
23 R/B GAIN R GAIN :+000 B GAIN :+000 °° °° DTL DTL :ON TOTAL DTL LVL :+00 H DTL LVL :11 CRISP :02 LVL DEPENDENT :2 PEEK FREQUENCY :10 KNEE APERTURE :ON KNEE APA.
24 DTL DTL :ON TOTAL DTL LVL :+00 H DTL LVL :11 CRISP :02 LVL DEPENDENT :2 PEEK FREQUENCY :10 KNEE APERTURE :ON KNEE APA.LVL :10 SLIM DTL :OFF DTL(+) :+00 DTL(-) :+00 DTL CLIP :0 DTL SOURCE :(B+G)/2 °° °° GAIN,AUTO IRIS LOW GAIN :0dB MID GAIN :9dB HIGH GAIN :18dB A.
25 S GAIN 1 TOTAL GAIN :62dB ANLG GAIN :36dB PIX MIX :06dB V MIX :OdB FRAME MIX :20dB H DTL LVL :00 CRISP :0 LEVEL DEPENDENT :5 PEAK FREQUENCY :2 M GAMMA :0.
26 Setting of Menu Items ! Maintenance menu 9 Color correction 1 menu Adjustment of gain (saturation) and phase of each color . < COLOR CORRECTION1 > SAT PHASE R +00 +00 Mg +00 +00 B +00 +00 Cy .
27 SETTING 1.MODE 2.SHUTTER 3.H.PHASE °° °° MODE BLACK STRETCH :OFF D5600K :OFF ANLG OUTPUT SEL :YPbPr CABLE COMPE :0m SUP GAIN :OFF CAM ID :BAR CAM ID POSI :0 COLOR CORRECTION :OFF °° °° Setting of Menu Items @ Setting menu - Menu for various settings.
28 SHUTTER SHUTTER MODE :OFF SHUTTER SPEED :1/100 SYNCHRO SCAN :75.1 °° °° H.PHASE H.PHASE-COARSE :09 H.PHASE-FINE :40 °° °° Setting of Menu Items @ Setting menu 3 Horizontal phase adjustment menu for external reference signal H.PHASE-COARSE: It is able to set the horizontal phase in 15 ¨ step.
29 °° CAM ID ID:AKHC900 °° H FILE MENU FILE :USER1 SAVE FILE? :USER1 SAVE : °° H FILE MENU FILE :USER1 SAVE FILE? :USER1 SAVE : °° Setting of Menu Items # Camera ID setting menu $ File managing and renewing menu - File operation menu : blinking display .
30 H FILE MENU FILE :USER1 SAVE FILE? :USER1 SAVE : ° FILE MENU FILE :USER1 SAVE FIL? :USER1 SAVE IN USER1.OK? YES NO °° FILE MENU FILE :USER1 SAVE FIL? :USER1 SAVE IN USER1.
31 BREAKER ZOOM/ FOCUS SDI OUT 1 2 1 / F LENS 1/2 q (12) 4-3/8 q (1 10) 4-15/16 q (125) 7/16 q (10) 5/8 q (15) 6-5/16 q (160) 13/16 q (20) Outside Dimension Diagram ( ): mm.
32 Image pickup device: 2/3 q 1 million-pixel IT CCD k 3 System : GBR image pickup system Resolving optical system: F1.4 prism Optical filter: CC: clear , 4300K, 6300K, cross ND: 100%, 25%, 6.3%, 3.2% Lens mount: Bayonet type Output spec.: SMPTE 296M Sensitivity: F10, 2000Ix, 3200K, white reflection rate 89.
Printed in Japan VQT9968-1 F0402H1062 @ P ANASONIC BROADCAST & TELEVISION SYSTEMS COMP ANY UNIT COMP ANY OF MA TSUSHIT A ELECTRIC CORPORA TION OF AMERICA Executive Office: One Panasonic W ay 4E-7,.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic AK-HC900P (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic AK-HC900P noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic AK-HC900P - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic AK-HC900P reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic AK-HC900P erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic AK-HC900P besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic AK-HC900P verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic AK-HC900P. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic AK-HC900P gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
