Benutzeranleitung / Produktwartung AK-HC3500P des Produzenten Panasonic
Zur Seite of 44
Bef ore operating this product, please read the instructions carefully and sav e this manual f or future use . Operating Instructions Multi-Format Camera Model No .
2 For y our safety CA UTION: This product uses a semiconductor laser system and is a laser class 1 product complies with Radiation P erformance Standards , 21CFR SUBCHAPTER J . Use of controls or adjustments or perf or mance of procedures other than those specified herein ma y result in hazardous radiation e xposure .
3 1) Read these instructions. 2) K eep these instructions. 3) Heed all warnings. 4) Follo w all instructions. 5) Do not use this apparatus near water . 6) Clean only with dr y cloth. 7) Do not bloc k any ventilation openings. Install in accordance with the manuf acturer’ s instr uctions.
4 Overview This unit is a new-gener ation multi-f ormat HD camera that suppor ts the 1080i format. It uses a ne w-gener ation 2/3-inch 2.2-megapixel IT -CCD [1920 (H) 1080 (V)] imaging de vice.
5 Precautions f or use DON’TS Do not attempt to disassemble the camer a or other units. In order to pre vent electric shock, do not remo v e screws or cov ers. There are no user-ser viceable par ts inside. Do not abuse the camer a. Av oid striking, shaking, etc.
6 Contr ols and their functions.
7 Contr ols and their functions.
8 Contr ols and their functions Lens mount (Bay onet type) This is where the lens is mounted. Lens clamp lever The lens is inser ted into the lens mount , and this lev er is then turned to clamp the lens in place. Lens cable, mic cab le clamps These are used to clamp the lens cable and mic cab le in place.
9 Contr ols and their functions Back tally LED selector s witch This is used to set the back tally LED to ON or OFF . Back tally LED This lights when the tally signal is supplied. This lights up red when the R tally signal is supplied, green when the G tally signal is supplied, and red when both the R and G tally signals are supplied.
10 Contr ols and their functions Monitor output selector switch [MONI SEL] This is used to select the images (Y , NAM, R, G, B) which are to be output from the monitor output connector . ND filter selector knob This is used to adjust the optical filter manually when LOCAL has been selected as the filter setting.
11 Mounting the lens 1 Raise the lens clamp le ver , and remov e the mount cap . Mount cap Lens clamp le ver 2 Align the guide pin on the lens with the groov e at the top center of the lens mount, and mount the lens. Guide pin Groo ve 3 Lower the lens clamp le ver to clamp the lens in place.
12 Adjusting the lens flange back Adjust the flange back (distance from the surf ace where the lens is mounted to the surf ace where the images are f ormed) if the subject f ails to be precisely focused at both the telephoto and wide-angle settings when z oom operations are to be perf ormed.
13 P erf orming the vie wfinder adjustments (The viewfinder is an optional accessory .) Attaching the vie wfinder 1 Check that the camer a’ s PO WER s witch is at the OFF position. 2 Pull up the knob on the mounting plate and slide the plate to attach the viewfinder .
14 P erf orming the vie wfinder adjustments (The viewfinder is an optional accessory .) Left or right position adjustment 1 Loosen the stopper screw . Viewfinder Stopper screw 2 Mov e the vie wfinder to the left or right to adjust its position. 3 Tighten the stopper screw .
15 Connecting a micr ophone Wh e n t h e m ic r op ho n e i s m o un t e d o n th e v i e wfi n de r (o p ti o na l ac c es s or y) f or u se The microphone of the microphone kit AJ-MC700 (optional accessor y) can be mounted on the viewfinder . 1 Open the microphone holder .
16 Mounting the camera on a tripod Use the tripod attachment, av ailable as an optional accessor y , to mount the camera on a tripod. 1 Mount the tripod attachment on the tr ipod. Select the appropriate holes from among the holes on the bottom of tripod attachment depending on where the center of gra vity of the camera and tripod attachment falls .
17 Component system configuration An e xample of the standard system consisting of the Multi-Format Camera (AK-HC3500) and peripheral components is described below and shown on the f ollowing page . The MSU (AK-MSU935) is not required unless a multiple number of camer as are to be controlled.
18 Component system configuration Outline of peripheral components 1 Camera Control Unit (CCU: AK-HCU931) This is the Multi-F ormat Camera’ s camera control unit. It is connected to the Multi-F or mat Camera using an optical fiber cable . It can suppor t HD/SD video input and output by connecting the HD/SD output unit.
19 System connections 1 (with Multi-Format Camera) 2˝ Electronic HD Viewfinder AJ-HVF21 Lens Multi-Format Camera AK-HC3500 ROP cable Remote Operation Panel AK-HRP931 Camera Control Unit AK-HCU931 Optical cable Bef ore proceeding with the connections , set the CCU power s witch to the OFF position.
20 System connections 2 (with Buildup Unit) Large lens Buildup Unit AK-HBU3500 8 LCD Viewfinder AK-HVF931A Multi-Format Camera AK-HC3500 Remote Operation Panel AK-HRP931 Camera Control Unit AK-HCU.
21 System connections 3 (with MSU) Optical cable Large lens Multi-Format Camera AK-HC3500 Master Setup Unit AK-MSU935 Remote Operation P anel 1 AK-HRP931 Camera Control Unit 1 AK-HCU931 Multi-Format C.
22 Status displa ys on vie wfinder screen Besides the images, Multi-F ormat Camera settings and messages indicating operating statuses appear on the viewfinder screen. The setting menu VF DISPLA Y screen and the items which hav e been set to ON using the s witches related to the viewfinder displa y appear at the top and bottom of the screen.
23 Menu operations Basic setting menu operations Displaying the menus User menu 1 Press the MENU s witch. The camera’ s USER menu screen now appears on the viewfinder or monitor . 2 T urn the JOG dial to select the menu item. 3 After having selected the item, press the JOG dial to access that item’ s menu.
24 Menu operations Entering the menu data (continued) When the setting flashes one character at a time, press the JOG dial to mov e the flashing tow ard the right. 1 When the JOG dial is pressed, flashing mov es tow ard the right. 2 T urn the JOG dial to change the setting.
25 Setting menu configuration Hierar chical men us USER MENU.
26 Setting menu configuration Hierar chical men us USER MENU.
27 Setting menu configuration Hierar chical men us USER MENU.
28 Setting menu configuration Hierar chical men us USER MENU.
29 Setting menu configuration Hierar chical men us USER MENU.
30 T able of adjustment setting ranges Operation Menu Item Adjustment setting range Initial value Items recorded on SD car ds VF Setting1 Side Modu SW ON, OFF OFF No switching from the SD card to the camera settings possible while the buildup unit is connected.
31 Menu Item Adjustment setting range Initial value Items recorded on SD car ds Setting1 HD-SDI 2 OUT MAIN, VF , RET MAIN HD-SDI2 P ow er ACTIVE, SA VE ACTIVE A UX I/O RET Y IN, PMT2 OUT , VBS OUT , D.
32 T able of adjustment setting ranges P ainting Menu Item Adjustment setting range Initial value Setting SW Flare ON, OFF ON Black Gamma ON, OFF OFF Gamma ON, OFF ON Knee ON, OFF ON White Clip ON, OF.
33 Menu Item Adjustment setting range Initial value Linear Matrix Matrix OFF , ON OFF Linear OFF , A, B OFF 1 2axes OFF , A, B OFF R-G –31 to +31 0 R-B –31 to +31 0 G-R –31 to +31 0 G-B –31 to.
34 Menu Item Adjustment setting range Initial value Skin T one Detail1 Skin T one DTL ON, OFF OFF Skin T one Get EXECUTE, CANCEL (ex ecution items) — Cursor OFF , ON OFF H Cursor 1 to 19 20 960 V Cu.
35 T able of adjustment setting ranges Maintenance Menu Item Adjustment setting range Initial value Date / Time (*1) Present (Display item) (Current date/time) Adjust NOP , SET NOP 1 2H, 24H 12H, 24H .
36 Menu Item Adjustment setting range Initial value CINE Gamma Cinema Gamma SW NORMAL, ON NORMAL Cinema Gamma SEL VIDEO_REC, FILM_REC VIDEO_REC Black STR L VL 0 to 30 30 Dynamic L VL 2 00 %, 300 %, 40.
37 SD car d operations These operations are perf ormed on the SD Card page on the Maintenance menu. The VF displa y settings and camera function settings on the Oper ation menu can be recorded on the SD card. F or details on what items are stored in the memor y of the SD card, ref er to “T able of the adjustment setting ranges .
38 CN# in the Instructions VF HR12-14RA-20SC (Hirose) Pin# Signal 1 VF+1 2V 2 VF+1 2V 3 UNREG_GND 4 VF-PBOUT_GND 5 VF-PBOUT_GND 6 VF-Y OUT 7 VF-Y OUT_GND 8 VF_CLK 9 VF_WR 10 VF_D A T A 11 UNREG_GN.
39 External dimension dra wings Unit: inch (mm) 14-3/16 (360) 10-1/4 (260) 4-1/8 (105) 5-5/16 (135).
40 Specifications P ower suppl y: DC 12 V (when e xter nal pow er is supplied) A C 150 V - 240 V (when CCU is connected) P ower consumption: 28 W (during external power supply operation, camera only) 34 W (when CCU is connected) indicates saf ety information.
41 Memo.
42 Memo.
43.
P ANASONIC BRO ADCAST & TELEVISION SYSTEMS COMP ANY UNIT COMP ANY OF P ANASONIC CORPORA TION OF NORTH AMERICA Executive Office: One P anasonic W a y 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic AK-HC3500P (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic AK-HC3500P noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic AK-HC3500P - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic AK-HC3500P reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic AK-HC3500P erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic AK-HC3500P besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic AK-HC3500P verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic AK-HC3500P. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic AK-HC3500P gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
