Benutzeranleitung / Produktwartung AJSPC700P des Produzenten Panasonic
Zur Seite of 124
Memory Card Cam era Recorder Operating Instructions Model No. AJ- P Before operating this product, pleas e read the insr u ctions c aref ully and save this manual for future u se.
2 Read this fir st! indica tes saf e ty inf ormation . CAUTION RISK OF ELEC TRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK O F ELECTRIC SHOCK, DO NOT REMOVE COVER ( OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO SERVICING TO QUAL IFIED SERVICE PERSONNEL.
3 PLEASE NO TE: z When prep ar ing to re cord important images , alwa ys shoot som e adv ance test f ootage , to v erify that both pictures and sound are being recorded nor mally .
4 Contents Read this firs t!. . . . . . . . . . . . . . . . . . . . . . 2 Chapter 1 Introducti on . . . . . . . . . . . . . . 7 1-1 Camera Un it Featu res . . . . . . . . . . . . . . . . . . .7 1-2 Recorde r/playe r Featu res . . . . . . . . . . . . .
5 Content s (continued) Chapter 5 Prepa ration . . . . . . . . . . . . . 64 5-1 Power Supp ly . . . . . . . . . . . . . . . . . . . . . . . . 64 5-1-1 Mounting the Bat tery and Setting the Battery Type . . . . . . . . . . . . . . . . . 64 5-1-2 Use of the ex ternal DC p ower suppl y .
6 Contents (co ntinued) Chapter 8 Menu Description Tables . . 98 8-1 Menu C onfigurat ion . . . . . . . . . . . . . . . . . . . .98 8-2 SYSTEM SETTING . . . . . . . . . . . . . . . . . . . .99 8-2-1 SYSTEM MODE . . . . . . . . . . . . . . . . . . . . .
7 1 Chapter 1 Intr oduction The AJ-SPC700P vide o camera-recorder integrates a came ra unit equipped wi th three CCDs, incor porating a 2/ 3-inch on- chip len s, and a vid eo recorde r/play er (VTR) t hat suppo r ts D VC PRO50 , D VCPRO and D V f ormats.
8 Chapter 1 Int r oduction (continued) / 4-channel Digital A udio Recording (all f ormats) All f or mats - D VCPRO , D V an d D VCPR O50 - support 4- channe l digital audio rec ording with high-q uality so und (48 kHz /16 bit s).
9 1 Chapter 1 Intr oduction (continued) / Recording Time (For more i nformation, see th e instruction manual fo r the appropria te memory card.) <Notes > z Opera tion of the f ollowi ng P2 cards.
10 Chapter 1 Int r oduction (continued) 1-3 System Configuration * F or the latest information on P2 cards and SD m emor y cards no t av ailab le in the oper ating Instructions , visit the P2 Support Desk at th e follo wing W eb sites . https://e ww .
11 2 Chapter 2 P ar ts and their Functions 2-1 P ower Supply and Accessor y Mounting Section PO WER sw itch Used to tu rn on/off the po wer . Battery mount A battery pack from Anton/ Bauer is mounted her e. DC IN (external power input) socket (XLR, 4P) This uni t is con nected to an e xter nal DC powe r supply .
12 Chapter 2 P ar t s and their Fun ctions ( continued) 2-2 Audio (input) Function Section MIC IN (microphone input) jack (XLR, 3-pin) A microph one (option al accessory) is conn ected here . P ow er f or the micro phone come s from thi s jack. A remote mi crophone ma y be connect ed.
13 2 Chapter 2 P ar t s and their Fu nctions (con tinued) 2-3 A ud io (output) F unction Section A UDIO OUT connector (XLR, 3-pin) This con nector outp uts audio s ignals rec orded on Channe ls 1, 2, 3 or 4. Output s ignals are s elect ed with the MO NIT OR SELECT CH1/2 / CH3/4 select or switch.
14 Chapter 2 P ar t s and their Fun ctions ( continued) 2-4 Shooting and Recor ding/Playbac k Functions Section / Shooting and Recording (camera unit) CC/ND FIL TER (filter s elector) control Used to select a filter ap propriate fo r illumina tion and color te mperatu re of the subjec t.
15 2 Chapter 2 P ar t s and their Fu nctions (con tinued) OUTPUT/A UT O KNEE selector switc h Used to select th e video s ignals s ent from the camer a unit to th e memor y , viewfi nder and v ideo mon itor . CAM. A UT O KNEE ON: Video bein g recorded through th e camera is sen t with the auto k nee circ uit activ ated.
16 Chapter 2 P ar t s and their Fun ctions ( continued) VIDEO OUT OUTPUT SEL s witch Used to s witch the signals output f rom the VID EO OU T connec tor . MEM: In EE (recording ) mode , video fro m the ca mera is output. In VV (pla ybac k) mo de, pl ay back sig nal from a P2 c ard is ou tput.
17 2 Chapter 2 P ar t s and their Fu nctions (con tinued) VIDEO OUT (video signal output) connector This co nnector outp uts vide o signal s. Th e video signa ls link ed to the se tting of the VIDEO OUT OUT PUT SEL s witch are output f rom here. OPTION SLO T Attach t he video encod er card (AJ-Y AX800G, opt ional).
18 Chapter 2 P ar t s and their Fun ctions ( continued) 2-6 Time Code Section GENLOCK IN connector (BNC) This con nector is used to i nput a ref erence si gnal bef ore the c amer a uni t is gen -l ocked, or be fore th e time code is exter nal ly lo cked.
19 2 Chapter 2 P ar t s and their Fu nctions (con tinued) 2-7 W arning and Status Display Functions Back tally la mp When the BA CK T ALL Y sw itch is set to [ON], the lamp beha ves in the same w ay as th e front tally la mp at the vie wfinder . BA C K T ALL Y sw it ch This s witch cont rols the acti on of the back and rear tally lamps.
20 Chapter 2 P ar t s and their Fun ctions ( continued) P ositi ons of time c ode-rela ted switches and information pr ovided 2-9 LC D Monitor LCD monitor The L CD monit or displa ys the v ideo in th e viewfinde r . Alternativ ely , it can show clips on the P2 card in a thumbn ail format.
21 2 Chapter 2 P ar t s and their Fu nctions (con tinued) 2-10 Vie wfinder Viewfinder (opt ional access ory) During reco rding or pla ybac k, the vie wfinder di spla ys the vide o image in mon ochrome. It also di spla ys warnings , messages , zebra pat ter ns, mark ers (saf ety zone and cent er mar ke rs), etc .
22 Chapter 3 Recor ding and Pla ybac k 3-1 P2 Car ds Inser ting P2 Cards <Note> When usin g the camer a-recorder f or the first time , be sure to set the time data bef orehand. On how the time data is set , see [4-5 S etting Time Data]. 1 T urn on the PO WER swit ch.
23 3 Chapter 3 Recording and Pla yback (contin ued) Removing P2 Card s 1 While pr essi ng d own th e sli de l ock butt on, move th e slide-o ut door to the left. The door opens . 2 Tilt do wn the EJECT b utton. 3 Then, d epress the EJ ECT b utton to release the P2 card so that you can re move it.
24 Chapter 3 Recording and Pla yback (continued) 3-2 Basic Pr ocedures This sec tion des cribes the basi c procedure f or shooting and recording . Before y ou embark on a shoot, pre-in spect y our system to ensure that it w orks properly . * F or directions on inspect ing your memor y card c amera-recorder , see [7-1 Inspections Before Shooting].
25 3 Chapter 3 Recording and Pla yback (contin ued) Shooting White/Black Balance A djustment to Recording Completion F or shoot ing, foll ow the step s belo w . 1 Select a filter acco rding to li ght condi tions. 2A When the wh ite b al anc e is save d: P osition the WHITE BAL s witch to [A] or [B].
26 Chapter 3 Recording and Pla yback (continued) 3-3 Normal R ecor ding Pressing either the REC ST ART/ST OP b utton, REC b utton on the han dle or VTR b utton at the lens s tar ts recording o f video an d sound on the P2 card.
27 3 Chapter 3 Recording and Pla yback (contin ued) 3-5 Loop Recording When tw o or more P2 card s lots conta in cards, this fun ction allows the target P2 card to be s witched in ord er . Eve n when the f ree spac e of a P 2 car d is used up, this fu ncti on contin ues recordin g while er asing e xisting data.
28 Chapter 3 Recording and Pla yback (continued) 3-7 N ormal and V a riable Speed P l ay b a ck The P LA Y/P A US E button p rovid es mono chro me pl ayback through the view finder and c olor pla yback on the LCD monitor . A c olor video mo nitor con nected to the VIDEO OUT connect or of the AJ-SPC700 P also pro vides colo r pla yback.
29 3 Chapter 3 Recording and Pla yback (contin ued) Associating V oice Memos with a Clip The portion of the clip with whic h a voi ce memo is associ ated depen ds on when the vo ice memo is reco rded. A vo ice mem o recorded d uring recording or p laybac k is associ ated with the p icture in view at the time the V OICE MEMO b utton is pre ssed.
30 Chapter 4 Adjustments an d Settin gs f or Recor ding T o record high-quality vide o with the AJ-SPC700P , t he blac k and whi te balanc es must be adjusted according to conditio ns.
31 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) Detection area for the w hite balance The detec tion area f or the white balance is selectab le betwe en 90%, 50% and 25% , using the men u optio n A WB AREA.
32 Chapter 4 Adjustm ents and Settings for Recor ding (continued) 4-1-2 Adjust ing the Black Balance The b lack bala nce must be adjusted when: z Y o u us e your AJ -SP C70 0P t he f irs t ti me; z Y .
33 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-2 Setting the Electr onic Shutter This secti on provides a desc r iption of the elec tronic shutte r , together w ith setting and handling di rections.
34 Chapter 4 Adjustm ents and Settings for Recor ding (continued) 4-2-3 Placing t he Camera- recor d er in SYNCHRO SCAN Mode T o place the camera-recorder in SYNCHRO SCAN mode, f ollo w the steps b elo w . 1 Pre ss t he S HUT TER switch posi tion ed at [ON] toward s [SEL], to pl ace the camera-record er in SYNCHR O SCAN mode.
35 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-4 Selecting Audio Input Signals and Adjustin g Recording Le vels In any f ormat (D VCPR O50, D VCPR O or D V), the AJ - SPC700P supp or ts f our-cha nnel audi o recor ding.
36 Chapter 4 Adjustm ents and Settings for Recor ding (continued) 4-4-2 Adjusting Recor ding Levels T o adjus t the recordin g le vels f or Audi o Channel s 1 and 2, f ollo w the steps b elo w .
37 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-5 Setting Time Data 4-5-1 Setting th e User Bits The use r bits allo w inf or mation, i ncluding memos that use up to eight-dig it base 16 numbers (date and time), to be recorded i n the Subc ode area.
38 Chapter 4 Adjustm ents and Settings for Recor ding (continued) 4-5-2 Setting t he Internal Cloc k’ s Dat e and Time 1 P osition the DISPL A Y s witch at [U B]. 2 Press the HOLD butt on to displa y a date i n the displ ay win dow . 3 P osition th e TCG s witch at [SET].
39 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-5-3 Setting the Time Code 1 P osition the DISPLA Y s witch at [TC]. 2 P osition the TCG s witch at [SET ]. 3 Set the menu option TC M ODE to “DF” or “NDF”. “DF” steps th e time code in drop frame mode , and “NDF” steps it in non-drop fr ame mode.
40 Chapter 4 Adjustm ents and Settings for Recor ding (continued) T o externally lock the time code F ollo w the steps b elo w . 1 T urn on the PO WER swit ch. 2 P osition the TCG s witch at [F-R UN]. 3 P osition the DISPL A Y s witch at [TC]. 4 Set the men u option G ENLOCK to “EXT”.
41 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-5-5 Pr oviding an ID to the Camer a The came ra ID is specified thro ugh the <CAMERA ID > scree n. The ID can in clude up to 10 alphan umeric char acters , symbol s, and/or spa ces.
42 Chapter 4 Adjustm ents and Settings for Recor ding (continued) 4-5-7 CTL Count Setting and Display By setti ng the DISPLA Y s witch to “CTL ”, CTL c ount is displa y ed on the time count indication of the LCD displa y wind ow . The CTL co unt is displ aye d in ±12 hours with non -drop- frame .
43 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-6 Menu Displa ys in the Vie wfinder Sc reen 4-6-1 Menu Configuration USER MENU: USER MENU is f actory-set.
44 Chapter 4 Adjustm ents and Settings for Recor ding (continued) 2 T urn the JOG d ial butt on to mo ve the mark ( ) to a des ired menu opt ion. Th en, p res s th e JOG dia l butto n to displa y the sub-men u screen. 3 T urn the JOG d ial butt on to mo ve the mark ( ) to a des ired menu opt ion.
45 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-7 Vie wfinder Sc reen Status Displa ys In addition to vi deo images, the vie wfinder dis pla ys lamps and t ex t that indicat e the settings and oper ating s tatus of the AJ-SPC700 P , together with m essage s, a c enter mark er , a saf ety zone m arker an d the cam era ID .
46 Chapter 4 Adjustm ents and Settings for Recor ding (continued) Inf ormation Item Indication Status Extender EX2 Lens ex tender used. MODE CHECK Indication Area (ST A T US: Master gain, USER SW GAIN ) LOW/MID/ HIGH –3 to 30 S.GA IN 30/36 V alue set f or the master gain Example: LOW: 0 Gain value to which S .
47 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) Inf ormation Item Indic ation Status Camera W arning and Report Area (related to A WB, ABB and switch settings) A WB A ACTI VE A WB B ACTI VE A WB A OK _ . _ K A WB B OK _ . _ K A WB BREAK _ .
48 Chapter 4 Adjustm ents and Settings for Recor ding (continued) Inf ormation Item Indication Status Gain v alue __ dB Current gain value . System inf ormation and warnings SYST EM ERR OR- __ TURN PO.
49 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) Inf ormation Item Indic ation Status PRE RECORDING indication/ SD me mor y ca rd rema inin g fr ee sp ace (when MODE CHECK is being p erform ed) P-REC (blink) __ h __ m Indicated while pre-recorded video and audio are being recorded on the P2 card.
50 Chapter 4 Adjustm ents and Settings for Recor ding (continued) *The menu o ption P2CARD REMAIN can b e fou nd in the < VF INDICA T OR2> screen, whi ch is accessib le from the VF page. *1 n : Not provided when the menu option ST A TUS is set to OFF , which can be found in the <MODE CHK IND> screen, accessible from the VF page.
51 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-7-4 Display Modes and S etting Cha nges/adjust ment Result Message s The mes sages th at appear on the vie wfinder screen to indicate changes to setti ngs and ad justment result s may be limited, or set not to appear , throug h the men u option DI SP MODE .
52 Chapter 4 Adjustm ents and Settings for Recor ding (continued) 4-7-5 Setting t he Marker Displa ys The cent er , saf ety zone , safe ty zo ne area and fr ame ma rkers ma y be set to ON or O FF , along with sp ecificat ions of the marker types.
53 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-8 Adju sting and setting the L CD monito r Using the LCD Monitor 1 T ur n on the PO WER switc h of the AJ-SPC700P . 2 Slide the OPEN button in the arro w direction to open th e LCD monitor .
54 Chapter 4 Adjustm ents and Settings for Recor ding (continued) 4-9 Menu-driven Function Setup Each func tion is se t up us ing t he m enu sy stem. 4-9-1 Setting t he Switc ho ver of USE R SW GAIN In additi on to the standard L/M/H gain mode, the AJ - SPC700P su ppor ts an S .
55 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-9-4 Assigning Functions to USER MAIN, USER1 and USER2 Buttons The USER MAIN, USER1, and USER2 buttons c an be assigne d user-selected functions. T o selec t desired fu nctions, us e the men u options USER MAIN SW , USER1 SW and USER2 SW .
56 Chapter 4 Adjustm ents and Settings for Recor ding (continued) 4-10 Handling data Setting Data Using an SD memory card An SD memo r y card (opti onal acce ssory) can be used as a setu p car d tha t st ores up t o ei ght file s of setti ngs menu specifi cations.
57 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4 T o format the SD memory card, turn the J OG dial bu tton to mov e the curs or to YES .
58 Chapter 4 Adjustm ents and Settings for Recor ding (continued) 6 T urn the JOG di al button u ntil a desired c hara cter appears . The chara cters that appear are switch ed in the followin g orde r.
59 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) T o read data on an S D memory ca rd 1 T ur n the JOG dial bu tton to mo v e the cursor to the option [ SD CARD READ/WRITE]. Then, press the d ial bu tton. 2 T ur n the JOG dial bu tton to mo v e the cursor to the men u option [R.
60 Chapter 4 Adjustm ents and Settings for Recor ding (continued) 4-10- 3 How to Use the Use r Data It is possib le to transf er settings and other data to the use r area of the inter nal memo r y of the AJ-SPC700P . This da ta allows yo u to quic kly reproduce an optimum setup state .
61 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-10- 4 Ho w to Use Scene File Da ta It is poss ibl e to wr ite the s ettings data into the s cene file area of the inte r nal memory of the AJ-SPC7 00P , or to read d ata written in this are a.
62 Chapter 4 Adjustm ents and Settings for Recor ding (continued) T o read settings data for scene files 1 Navig ate the me nu to the <SCENE> sc reen. 2 T ur n t he JOG di al but to n to move th e cur sor to t he option SCENE SEL. 3 Press the JO G dial b utton to b link scene file n umbers .
63 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) T o title setting s data for scen e files 1 Nav igate the menu to the <SCENE> screen. 2 T ur n the JOG dial bu tton to mo v e the cursor to the optio n [T ITLE s 1 - 4] for the appr opr iat e sc ene f ile.
64 Chapter 5 Preparation 5-1 P ower Suppl y A battery pac k or an external DC p ow er suppl y can be used as this unit’ s powe r supply . Using a Ba ttery Pack Battery pac ks from th e fol lowing ma.
65 5 Chapter 5 Preparation (continued) When using a BP-90 type battery pack 1 Remo ve the ba ttery holder . 2 Attachin g the batte r y case to the cam era-reco rder . Connect the c able on the came ra-recorder to the cab le on the battery case (BP-90 type).
66 Chapter 5 Preparation (continued) Using an NP-1 type batter y pack 1 Remo ve the battery holde r . 2 Mount the NP-1 type batte r y case on the ca mera- recorder . Tighten t he mounting sc rew s. Tighten t he power co ntact screws . Insert the uppe r par t of t he remo v ed co ver in the directio n of the arro w .
67 5 Chapter 5 Preparation (continued) 5-1-2 Use of the ext ernal DC po wer suppl y 1 Conne ct the e xternal DC pow er supply to the DC IN soc ke t on the un it. 2 T ur n ON the po wer s witch of the e xternal DC po wer suppl y . (If the power swit ch is av ail able on t he exte rn al DC power supp ly) 3 T ur n ON the PO WER s witch on the u nit.
68 Chapter 5 Preparation (continued) 5-3 Mo unting the lens an d P erforming the Flange Bac k and White Shading Adju stments Mounting the Lens 1 Raise th e lens cl amping le ve r and remov e the mount cap . 2 T o mou nt the le ns, a lign the ind entation at the top cent er of th e le ns mou nt wi th t he ce nte r mar k of th e lens.
69 5 Chapter 5 Preparation (continued) Adjusting the Lens White Sha ding T ak e the f ollo wing step s to adjust t he white shading : <Note> V ertical coloring m a y occur near the op en position of the lens iris , ev en after adju sting the white shading .
70 Chapter 5 Preparation (continued) This co mpletes the white sh ading adjustm ent. The com pensatio n values are stored i n the no n-volatile internal memory . Theref ore, re-adjust ing the white sha ding is not require d, ev en after the camera-recorde r powe r has been turned off .
71 5 Chapter 5 Preparation (continued) Reading out the Lens File Data 1 Select the lens file No . to read out by f ollowing Ste ps 1 to 3 in the [Storing the Lens File Data] section. 2 T ur n the JO G Dial b utton to mo v e the cursor to [READ:]. 3 Press the JOG Dial bu tton and the f ollowing message appears .
72 Chapter 5 Preparation (continued) 5-4 Prep aring f o r A udio In put T ak e the f ollowing s teps to p repare the ca mera f or conn ecting au dio input de vices . 5-4-1 When Using the Front Micr opho ne The AJ-M C700P micr ophone kit (opti onal) includes a microph one that c an be mou nted on th e camer a.
73 5 Chapter 5 Preparation (continued) 5-4-3 When Using A udio Devices 1 Connect the audio de vice to the AUDIO I N jack with the XL R c a bl e. 2 Set the A UDIO IN s witch to [REAR] f or the channel to whic h the XLR ca ble is con nected. 3 Set the LINE/M IC/+48V selec tor s witch on the rea r panel t o [LINE].
74 Chapter 5 Preparation (continued) <Notes> z A USB dr iver must be inst alle d on the PC. z AJ-SPC700P is onl y applicab le to USB 2.0, not to USB 1.1. z Only o ne AJ-SPC700P at a ti me must be connected to the P C via US B. z The P2 card m ust not be rem ov ed wh en it is conne cted via USB .
75 5 Chapter 5 Preparation (continued) 5-7 Attaching the Sh oulder Strap T o deta ch the shou lder str ap , first open the ho oks, then detach th e strap .
76 Chapter 5 Preparation (continued) 5-10 Attaching the Front A udio Level Control Knob If yo u use the F ront A udio Le vel contro l frequently , attach the access or y knob so that it can be easily operated . Remov e the scre w in the cente r of the F ront Au dio Le vel control, an d attach the acce ssory knob using the scre w (include d).
77 6 Chapter 6 Manipulating Clips with Thumbnails A clip is a data g roup that inclu des the images and v oices create d from one shooting sess ion, t ogether with additional inf or mation su ch as v oice mem os and meta data.
78 Chapter 6 Manuipulating Clips wit h Thumbn ails (continued) 6-2 T humbnail Screen Press th e THUMBNAIL b utton to dis pla y the thumbn ail screen on the LCD monitor . Pressi ng the THUMBNAIL butto n again returns the d ispla y to the regu lar displa y .
79 6 Chapter 6 Manuipula ting Clips wit h Thumbnails (continued) Indicator for clips with pr oxy This ma r ker is d isplay ed fo r clips with pro xy attach ed. Indicator for edit copy clips This mar ker is disp layed for clips whos e ed it c opy oper ation w a s perf ormed on the P2 dec k.
80 Chapter 6 Manuipulating Clips wit h Thumbn ails (continued) 6-5 Switching the Thumbnail Display The displ ay ca n be s witch ed so that o nly those cli ps matchin g the specifie d conditio ns are displa yed in the thumbnai l screen. 1 Press the T HUMBNAIL b utton.
81 6 Chapter 6 Manuipula ting Clips wit h Thumbnails (continued) 6-7 V oice Memo A vo ice memo is audi o data that can be attached to th e clip separ ately from the v oice recorded during shooti ng. <Note> A vo ice memo can be attached during re cording.
82 Chapter 6 Manuipulating Clips wit h Thumbn ails (continued) 6-7-3 Deleting V oice Memos 1 P erfor m S teps 1 to 4 in the [6-7-1 Pl ay ing Bac k V oice Memos] s ection to select the v oice memo in the clip . 2 Mov e the pointer o ver the c lip y ou want to del ete, and press the M ENU BAR button .
83 6 Chapter 6 Manuipula ting Clips wit h Thumbnails (continued) 6-11 Copying Clips Selected clips can be copied to the P2 card o r SD memory card in th e desired slot. 1 Press th e THUMBNAIL b utton. The thum bnail screen a ppears on the LCD m onitor .
84 Chapter 6 Manuipulating Clips wit h Thumbn ails (continued) 5 Names o f metadata u pload files st ored on the SD memory card a re displa y ed. Select the desired fil es us ing t he c urs or butt ons, and choos e YE S. Up load starts. Uploade d metada ta is reta ined e ve n if the power is turned off .
85 6 Chapter 6 Manuipula ting Clips wit h Thumbnails (continued) Selecting the USER CLIP NAME recording method Select M ET A D A T A USER CLIP NAME from the men u bar to se lect the recordi ng method. T wo op tions are av ailabl e: TYPE1 and TYPE2.
86 Chapter 6 Manuipulating Clips wit h Thumbn ails (continued) 6-14 Formatting a P2 Card 1 Press the T HUMBNAIL b utton. The thumb nail screen app ears on th e LCD monitor . 2 Press the MENU BAR b utton. The pointer mov es to the menu bar . 3 F rom the me nu bar, selec t OP ERA T ION FORMA T .
87 6 Chapter 6 Manuipula ting Clips wit h Thumbnails (continued) 6-16 Setting the Thumbnail Display Mode The thum bnail dis pla y mode can be cus tomised to su it you r pref erences. 1 Press th e THUMBNAIL b utton. The thum bnail screen a ppears on the LCD m onitor .
88 Chapter 6 Manuipulating Clips wit h Thumbn ails (continued) 6-17 Pr oper ties The clip ’s properties and the P2 card’ s status ar e displa yed. 6-17-1 Clip Pr oper ty F rom the menu bar , select PR OPER TY CLIP PROPER TY . The f ollowin g screen appears .
89 6 Chapter 6 Manuipula ting Clips wit h Thumbnails (continued) Contents of P2 Card Status Displa y Settings F rom the m enu b ar, selec t PROPE R TY CARD ST A TUS. The f ollowin g screen app ears. When “REM AIN” is selected: Write-protect Mark The mar k ap pea rs if t he P2 car d is wr i te-p rote cte d.
90 Chapter 6 Manuipulating Clips wit h Thumbn ails (continued) 6-17-3 S D memory car d Status Displa y The status display enab les a confirmation of the SD memory card f or matted condition, a vailab le memory capaci ty etc. F rom the menu bar , s elect PRO PER TY DEVICES SD CARD .
91 7 Chapter 7 Maintenance and Inspections 7-1 Inspections Bef ore Shooting Mak e sure you chec k that the system is operatin g normally bef ore embarking on a shoo t. We rec ommend us ing a colo r video m onitor t o check the image. 7-1-1 Preparing f or Inspections 1 Mount a charged battery pac k.
92 Chapter 7 Maintenance and Ins pections (continued) 7-1-3 Inspecting the Memory Recording Functions Mak e sur e yo u successiv ely carry out the inspect ions from [1. Inspe cting the P2 Card Rec ording] to [ 4. Inspecting the Earphone and Speak er].
93 7 Chapter 7 Maintenance and In spections (continued) 6. Inspection of the clock, time code, and user bi ts 1 Set the u s er’ s bit as required. Please re f er to [4-5-1 Sett ing the User Bit s] f or the setti ng p roc edu res. 2 Set the ti me code.
94 Chapter 7 Maintenance and Ins pections (continued) 7-2-4 Connector Signals P anasonic P a r t No . K1AA104H00 38 Manuf acturer Part No. HA16R X-4P(SW1) (Hirose Electric Co.) <Not e> Confirm corre ct polarity w hen usin g an exter nal power su ppl y .
95 7 Chapter 7 Maintenance and In spections (continued) 7-3 W arning System 7-3-1 W arni ng Description T abl es If a prob lem is detec ted imm ediately after the po wer is tu rned on, or during operati on, this w ill be i ndicated by the W ARNI NG lamp , lamps in side the vie wfinder and a war ning to ne.
96 Chapter 7 Maintenance and Ins pections (continued) 5. P2 Card Fully Recor ded Displa y window indic ation All 7 bar indicators for remaining MEDIA capacity star t blinking. W ARNING lamp C ontinues to light up until an operation is performed. Ta l l y l a m p Continues to blink 4 times per second u ntil an operation is per f or m ed.
97 7 Chapter 7 Maintenance and In spections (continued) 7-3-2 Error Codes The f ollowin g error codes a re displa yed in the displa y wind ow if an erro r oc cur s in t he c amer a: 9. Batter y Nearly Empty Displa y window indi cation One of the bars in the batter y remaining indi ca tor st ar ts blin kin g.
98 Chapter 8 Men u Description T ab les 8-1 Menu Configuration Abou t Menu D esc rip tio n T ables USER MENU USER MENU SELECT SYSTEM SETTING P AINT CAM OPERA TION SYSTEM MODE OPTION MODE REC FUNCTION .
99 8 Chapter 8 Menu Description T a bles (continued) 8-2 SYSTEM SETTING 8-2-1 SYSTEM MO DE 8-2-2 OPTION MODE <Note> Menu opt ions fo r setting 1394 are di spla yed when an IEEE1394 in terface bo ard (AJ-Y AD800G, optional ) is attached . F or more inf or mation, se e the AJ-Y AD800G instruction m anual.
100 Chapter 8 Menu Description T ables (continued) 8-2-3 REC FUNCTION 8-2-4 OUTPUT SEL The ____ i n the Adjustab le Range colu mn indic ates the preset m ode. Items/ Data Saved Adjustable Range Remarks PRE R EC MODE ON OFF Select whether or not to enabl e PRE RECORDING.
101 8 Chapter 8 Menu Description T a bles (continued) 8-2-5 LCD MONIT OR 8-2-6 GENLOCK The __ __ in the Adj ustab le Range co lumn ind icates the preset m ode. Items/ Data Saved Adj ust abl e Range Remarks BRIG HTNE SS –7 : +0 : +7 Adjust the LCD m onitor brightness.
102 Chapter 8 Menu Description T ables (continued) 8-3 P AINT 8-3-1 R OP 8-3-2 MA TRIX <Note> The it ems in dicated b y are the setting ite ms f or P AINT MENU SW( ) R/W in the <SD CARD R/W SELECT> screen. T he items w ithout are the sett in g it ems for P AI NT MENU LEVEL R/W .
103 8 Chapter 8 Menu Description T a bles (continued) 8-3-3 COLOR COR RECTI ON 8-3-4 LO W SETTING <Note> The it ems ind icated b y are the setting ite ms f or P AINT MENU SW( ) R/W in the <SD CARD R/W SELECT> screen. Th e items withou t are the sett ing items f or P AINT MENU LEVEL R/W .
104 Chapter 8 Menu Description T ables (continued) 8-3-5 MID SETTING 8-3-6 HIGH SETTI N G <Note> The it ems in dicated b y are the setting ite ms f or P AINT MENU SW( ) R/W in the <SD CARD R/W SELECT> screen. T he items w ithout are the sett in g it ems for P AI NT MENU LEVEL R/W .
105 8 Chapter 8 Menu Description T a bles (continued) 8-3-7 ADDITIONAL DTL 8-3-8 SKIN T ONE DTL <Note> The it ems ind icated b y are the setting ite ms f or P AINT MENU SW( ) R/W in the <SD CARD R/W SELECT> screen. Th e items withou t are the sett ing items f or P AINT MENU LEVEL R/W .
106 Chapter 8 Menu Description T ables (continued) 8-3-9 KNEE/LEV EL <Note> The it ems indi cated by are the setting ite ms f or P AINT MENU SW( ) R/W in the <SD CARD R/W SELECT> screen. Th e items withou t are the sett ing items f or P AINT MENU LEVEL R/W .
107 8 Chapter 8 Menu Description T a bles (continued) 8-3-1 2 CAMERA SETTING ZEBRA Pattern Displa y <Note> All items in CAMERA SETTING ar e setting ta rgets of the item P AINT M ENU SW( ) R/W in the <SD CARD R/W SELECT> screen. 8-4 VF 8-4-1 VF DISPLA Y The __ __ in the Adj ustab le Range co lumn ind icates the preset m ode.
108 Chapter 8 Menu Description T ables (continued) 8-4-2 VF MARKER 8-4-3 US ER BO X 8-4-4 VF INDICA T OR1 The ____ i n the Adjustab le Range colu mn indic ates the preset m ode. Items/ Data Saved Adjustable Range Remarks TA B L E A B Select the VF M ARKER set ting table.
109 8 Chapter 8 Menu Description T a bles (continued) 8-4-5 VF INDICA TOR2 8-4-6 MODE CHECK IND The __ __ in the Adj ustab le Range co lumn ind icates the preset m ode. Items/ Data Saved Adj ust abl e Range Remarks P2CA RD REMA IN OFF ONE-CA RD TOT A L Select the indication mode f or the P2 card’ s remaining capacit y .
110 Chapter 8 Menu Description T ables (continued) 8-4-7 !LED <Note> If both GAI N (0 dB) and G AIN (–3 dB) are s et to ON, the LED ill uminates ex cept when GAIN is adjusted to 0 dB and –3 dB . 8-5 CA M O PER A T ION 8-5-1 CAMERA ID <Note> This se tting is canc eled when READ F A CT OR Y DA T A is selec ted .
111 8 Chapter 8 Menu Description T a bles (continued) 8-5-3 SHUTTER SELECT 8-5- 4 USER SW <Note> Fo r each functi on of th e USER s witches , refer to [4-9-4 Assigni ng Functio ns to USER MAIN, USER1 and USER2 Buttons]. The __ __ in the Adj ustab le Range co lumn ind icates the preset m ode.
112 Chapter 8 Menu Description T ables (continued) 8-5-5 SW MODE 8-5-6 WHITE B ALANCE MODE The ____ i n the Adjustab le Range colu mn indic ates the preset m ode. Items/ Data Saved Adjustable Range Remarks RET S W R EC CHECK CAM RET Select the RET switch function.
113 8 Chapter 8 Menu Description T a bles (continued) 8-5-7 USER SW GAIN 8-5-8 IRI S 8-6 MAIN OPERA TION 8-6-1 B A TTER Y/P2CARD The __ __ in the Adj ustab le Range co lumn ind icates the preset m ode. Items/ Data Saved Adj ust abl e Range Remarks S.GAIN 30 dB _ • Select whether or not to enab le 30dB f or SUPER GAIN.
114 Chapter 8 Menu Description T ables (continued) 8-6-2 BA TTER Y SETTING1 The ____ i n the Adjustab le Range colu mn indic ates the preset m ode. Items/ Data Saved Adjustable Range Remarks CARD NEAR END ALAR M ON OFF Select whether or not to set the alarm to beep f or P2 CARD NE AR END ALARM.
115 8 Chapter 8 Menu Description T a bles (continued) <Note> The rem aini ng batt er y ca paci ty for d igi tal b att er ies is displa yed as % inside the vie wfinder (PR O14/TRIM 14/ HYTR ON50/HYTRON1 00/HYTRON120 /DIONIC90/ DIONIC160/NP-L50/ENDURA50/ENDURA80) .
116 Chapter 8 Menu Description T ables (continued) 8-6-3 B A TTER Y SETTING2 8-6-4 M IC/A UDIO1 The ____ i n the Adjustab le Range colu mn indic ates the preset m ode. Items/ Data Saved Adjustable Range Remarks NiC d14 _ • Enable selection under BA TT ER Y SELECT .
117 8 Chapter 8 Menu Description T a bles (continued) 8-6-5 MIC /A UDIO2 8-6-6 TC/UB The __ __ in the Adj ustab le Range co lumn ind icates the preset m ode. Items/ Data Saved Adj ust abl e Range Remarks FR ONT MIC PO WER ON OFF Select the phantom power supply f or the front microphone.
118 Chapter 8 Menu Description T ables (continued) 8-6-7 UMID SET/INFO <Note> Please re fe r to [4-5-6 Setting UMID Inf or mation] f or the UMID inf or mation setting. 8-7 FILE 8-7-1 SD CAR D READ/WRITE The ____ i n the Adjustab le Range colu mn indic ates the preset m ode.
119 8 Chapter 8 Menu Description T a bles (continued) 8-7-2 SD CARD R/W SELECT 8-7-3 LENS FILE 8-7-4 S CENE 8-7-5 I NITIALIZE The __ __ in the Adj ustab le Range co lumn ind icates the preset m ode.
120 Chapter 8 Menu Description T ables (continued) 8-8 MAINTENA NCE 8-8-1 S YSTEM CHE C K 8-8-2 LE NS ADJ 8-8-3 BLA CK SHADING 8-8-4 WHITE SHADING 8-8- 5 D IA GNO ST IC1 The ____ i n the Adjustab le Range colu mn indic ates the preset m ode.
121 8 Chapter 8 Menu Description T a bles (continued) 8-8-6 DIA GNOSTIC2 8-8-7 HOURS METER 8-9 OPTION MENU 8-9-1 O PTION <Note> Menu opt ions fo r setting 1394 are di spla yed when an IEEE1394 in terface bo ard (AJ-Y AD800G, optional ) is attached .
122 Chapter 9 Specifications [General] Operating temperatur e: 0 ° C to +40 ° C (32 ° F to +104 ° F) Storage temperature: –20 ° C to +60 ° C (–4 ° F to +1 40 ° F) Operating humidity: 10% t.
123 9 Chapter 9 Specifications (continued) A udio Syst em Sampling frequenc y: 48 kHz (synchro nised with vi deo) Quantizing: 16 bits Frequenc y response: 20 Hz - 20 kHz ± 1.0 dB ( at standar d lev e l) Dynamic range: Minimum 85 dB (1 kHz, A WTD) Distor tion factor: 0.
P ANAS ONIC BRO ADCAST & TELEVISION SYSTEMS COMP A NY UNIT COMP ANY OF P A NASONIC CORPORA TION OF NORTH AMERICA Executive Office: One Panasonic W ay 4E-7, Secaucus, NJ 07094 (201) 3 48-7000 EASTERN ZONE: One Panasonic W ay 4E-7, Secaucus, NJ 07094 (201) 3 48-7196 Southe as t Regi on: (201) 348-7162 WESTERN ZONE: 3330 Cahuenga Blvd W .
Ein wichtiger Punkt beim Kauf des Geräts Panasonic AJSPC700P (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic AJSPC700P noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic AJSPC700P - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic AJSPC700P reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic AJSPC700P erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic AJSPC700P besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic AJSPC700P verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic AJSPC700P. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic AJSPC700P gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
