Bedienungsanleitung Panasonic AG-HPX250P Kamera

Seite 1

Shooting Playback Editing Displays Menu Reference M0811HO0 -FJ ENGLISH VQT3T24A (E) Operating Instructions Vol.2 Memory Card Camera-Recorder Model No. AG-HPX250P AG-HPX250EN Note that Operation Instructions Vol. 2 describes advanced operations of the Memory Card Camera-Recorder.

Seite 2

2 • SDHCLogoisatrademarkofSD-3C,LLC. • HDMI,theHDMIlogo,andHigh-DenitionMultimediaInterfacearetrademarksorregisteredtrademarks ofHDMILicensingLLC.

Seite 3

3 Contents V olume1 Read this first! (For AG-HPX250P) Read this first! (For AG-HPX250EN) Read this first! (For AG-HPX250P/ AG-HPX250EN) Outline of operations Before use Operating precautions Precau.

Seite 4

4 Contents (continued) Shooting Viewnder ............................................................ 6 Usingtheviewnder ..........................................  6 UsingtheLCDmonitor ...................................

Seite 5

5 Nonlinear editing with P2 card (PC mode: USB device) .......................................................... 109 Proceduresformakingconnectionstoa personalcomputer .....................................  109 Using a hard disk drive (PC mode: USB host) .

Seite 6

6 V iewnder • ThepixelsoftheLCDmonitorarecontrolled toobtainhighprecisionwith99.99%ofthe effectivepixels. Thisleaveslessthan0.01% ofpixelsthatmaynotlightormayremainon allthetime.

Seite 7

7 Shooting Using the LCD monitor 1 Set the POWER/MODE switch to ON. (Page25ofV ol.1) 2 Open the LCD monitor . • Itcanopenoutto90degrees.Donottry toopenitfurtherasthiswilldamagethe camera-recorder .

Seite 8

8 Adjusting the screen display 1 Set the POWER/MODE switch to ON. (Page25ofV ol.1) 2 Press the MENU button. • Fordetails onmenuoperation ,referto“Using thesetupmenus”(Page28ofV ol.1). • Y oucanalsousethecorrespondingbuttons ontheremotecontrol.

Seite 9

9 Shooting T ally lamp T ally lamp (Front) T ally lamp (Rear) Thetallylampcanbeilluminatedduringrecording bysettingtheT ALL YLAMP itemontheOTHER FUNC TIONS screen (Pag e151) toan yset tingo ther thanOFF .

Seite 10

10 Basic shooting operations Preparing to shoot 1 Set the POWER/MODE switch to ON. (Page25ofV ol.1) 2 Push the OPEN lever of the P2 card slot cover downward (  ) and slide to open (  ). 3 Insert the P2 card securely in the card slot.

Seite 11

11 Shooting Underthefollowingcircumstances,evenif youpresstheST AR T/STOPbuttonitmay takesometimeuntilthewritingtotheP2card nishes.Forthisreason,theoperationwillnot beacknowledgedifyoupresstheST AR T/STOP buttontoosoon.

Seite 12

12 P2 card access lamps ■ CAMERA/PB/PC (USB HOST) mode Lights green: Datacanbesavedontothecardsorloadedfrom them. Blinks green (slow): Noavailablespaceoncard,cardis writeprotected. Lights orange: Slotthatistheobjectofrecording.

Seite 13

13 Shooting Formatting P2 cards 1 Set the POWER/MODE switch to ON. (Page25ofV ol.1) 2 T urn the POWER/MODE switch to set to PB/ THUMBNAIL mode (PB/THUMBNAIL lamp illuminates). • Thumbnailsaredisplayed. Mode lamp (PB/THUMBNAIL) POWER/MODE switch 3 Press the MENU button.

Seite 14

14 Splitting clips recorded on P2 cards Thiscamera-recorderwillautomaticallygenerate additionalclipsforacontinuousrecordingon an8GBorhighercapacityP2cardwhenthe recordingexceedsthedurationsgivenbelow .

Seite 15

15 Shooting Remove the P2 card 1 Push the OPEN lever of the P2 card slot cover downward (  ) and slide to open (  ). 2 Check that the P2 card access lamp is not blinking orange. 3 Push the P2 card eject button and press it. 4 Remove the P2 card.

Seite 16

16 Y oucanuseSDandSDHCmemorycards(the term“SDmemorycard”isusedforbothhereafter) tosaveandloadSCENElesandUSERles,and touploadclipmetadata.

Seite 17

17 Shooting Cautions in using SD memory cards SDmemorycardsusedwiththe AG-HPX250P/EN shouldconformtoSDorSDHCstandards. Besuretoformatcardsusingthe AG-HPX250P/ EN. SDmemorycardswiththefollowingcapacitycan beusedforthe AG-HPX250P/EN.

Seite 18

18 Using the zoom function Thiscamera-recorderhasa22xopticalzoom function. Zoomwiththezoomleverorthezoomring.

Seite 19

19 Shooting Digital zoom function AssigntheD.ZOOMfunctiontoUSERMAINor anyoftheUSER1–4buttonstoenableuseofthe digitalzoom.(Page39) EachpressoftheUSERbuttontowhichD.

Seite 20

20 Shooting in progressive mode • In 24P/24P A, 24PN (native recording) and in 30PN/25PN (native recording) at 720P , the camera starts recording in 5-frame, 4-frame and 2-frame segments, respectively .

Seite 21

21 Shooting Recording with V ariable Frame Rate (VFR) In1080iand720Pmode,thisunitcanshoot usingframeskipping(undercranking)andhigh speedrecording(overcranking).Y oucanselect native(PN)recordingmodeandstandard(OVER) recording.

Seite 22

22 Standard VFR recording (pulldown recording) 1 In 1080i or 720P mode, set REC FORM A T on the setting menu SYSTEM SETUP screen to A VC-I 100/60i (60P) (or 50i, 50P). 2 In the SCENE FILE screen, set the menu option VFR to ON and the menu option FRAME RA TE to suit shooting purposes.

Seite 23

23 Shooting Using progressive mode and VFR recording function Standard speed for lm production Screenproductionnormallyrequiresa24fps(24framespersecond)framerate(normalspeed)for screeningalm.

Seite 24

24 Recording with V ariable Frame Rate (VFR) (continued) Shooting at standard speed for producing commercials and TV programs Whenproducingvideosfordisplayonatelevisionscreen�.

Seite 25

25 Shooting Undercranking effects Thiseffectproducesthequickmotionoftenusedforshowingcloudsdriftingacrossthesky ,crowdsof peopleswarmingpastasolitarystandingindividual,akungfudemonstrationandotherperformances.

Seite 26

26 Recording with V ariable Frame Rate (VFR) (continued) Overcranking effects Overcrankingproducesslow-motionplayback,whichisfrequentlyusedinclimaxscenes,orfordramatic effectslikecarchasesandactionscenes.

Seite 27

27 Shooting Flow effect shooting Thiswayofshootingprovidesaoweffectand may ,forinstance,beusedtoshootasubjecton afarsideofaro.

Seite 28

28 Shooting in manual mode T emporarily switching to auto focus EvenifyouhaveswitchedFOCUStoM(MANUAL) thecamera-recorderwillfocusautomaticallywhile youpressdownPUSH AUTO.

Seite 29

29 Shooting Using focus assist function PressingtheFOCUS ASSISTbuttonmagniesthe imageatthecentertofacilitatefocusing. SetthemenuoptionFOCUSBARtoONinthe DISPLA Y SETUPscreentodisplaythefocusbar .

Seite 30

30 Shooting in manual mode (continued) Iris adjustments IRIS ring IRIS button 1 If the camera-recorder is in auto mode, use the AUTO/MANUAL switch to switch to manual mode. (Page 28) 2 Press the IRIS button to switch how to adjust the aperture of lens.

Seite 31

31 Shooting Using super gain Y oucanincreasethegainlevelfurtherwhen shootingindarkspace. SetSUPERGAINonthesettingmenuSWMODE screento24dB,30dBorBOTH.

Seite 32

32 1 Set the GAIN and WHITE BAL switches. • FortheWHITEBAL switch,select A orBas apositiontosavetheadjustmentvalue. 2 Adjust the ND FIL TER dial according to the light conditions. ForexamplesofNDFIL TERdial,see“Light intensityadjustments”(Page31).

Seite 33

33 Shooting 7 The adjustment will take effect in a few seconds, and the following message will appear: • Theadjustedvalueisautomaticallystoredin theselectedmemory(A orB).

Seite 34

34 Adjusting the black balance Theblackbalancemustbeadjustedwhen: • Y ouuseyour AG-HPX250P/ENthersttime. • Y our AG-HPX250P/ENhasnotbeenusedfor sometime. • Theambienttemperaturehaschanged substantially .

Seite 35

35 Shooting Shooting techniques for different targets Scan reverse shooting BysettingSCANREVERSEonthesettingmenu SYSTEMSETUPscreentoON,videocanbe vertically/horizontallyinvertedwhendisplayingand recording.

Seite 36

36 Center marker display A centermarkerisdisplayedwhenthemenuoption MARKERintheDISPLA Y SETUPscreenissetto ON.(Page147) The center marker display appears only on the LCD monitor and in the viewnder .

Seite 37

37 Shooting Changing the image size Whenrecordingin480i/576imode,youcan changethesize(aspectratio)oftheimagesthat yourecord. Selecttheaspectratiointhesetupmenus, SY S TE M S ET UP  sc r ee n,  AS PE CT CO N V .

Seite 38

38 Shooting techniques for different targets (continued) FBC (Flash Band Compensation) Thiscamera-recordercomeswithafunctionto compensateforandminimizelightband(.

Seite 39

39 Shooting Using the USER buttons Y oucanallocatetheselectedfunctiontoUSER MAINandUSERbuttons1to4. USER MAIN buton USER1 – 3 buton USER4 buton Selectable Functions SPOTLIGHT : Assignsautoiriscontrolon/offforspotlight.

Seite 40

40 Shooting techniques for different targets (continued) Backlight compensation PresstheUSERbuttonyouhaveallocatedtothe BACKLIGHTfeaturewhenshootingsubjectslit fromtheback. BACKappearsonthescreen.

Seite 41

41 Shooting 2-slot continuous recording IfyouinserttwoP2cardsintothetwocardslots, thisfunctionallowsyoutorecordcontinuouslyon thetwocards.

Seite 42

42 T ext memo recording Thisfunctionaddstextmemosatthevideopoints ontheclipnowbeingrecordedorplayedback. WhenyoupresstheUSERbuttontowhichthe TEXTMEMOfunctionhasbeenallocated,thetext memowillberecordedatthatpoint.

Seite 43

43 Shooting Using special recording modes DuringP2cardrecording,thefollowingspecialrecordingmodescanbeenabledfromtheRECORDING SETUPscreen:pre-recording,intervalrecording,one-shotrecording,looprecording,andone-clip recording.

Seite 44

44 Pre-recording (PRE REC) Thisfunctionisusedtostartrecordingacertain numberofseconds(approx.3secondsforHD recordingsorapprox.7secondsforSDrecordings) beforeactualrecordingstarts.

Seite 45

45 Shooting • The pre-recording and one-clip recording functions are not available. • Sound is not recorded. • Data recorded (until the stop recording) in this mode is recorded as a single le. • There is no output from the DVCPRO/DV connector .

Seite 46

46 Loop recording (LOOP REC) • WhentwoP2cardsareinsertedintheP2card slots,eachcardisrecordedinsuccession.

Seite 47

47 Shooting One-clip recording (ONE CLIP REC) Insteadofcreatinganewclipforeachrecording session(i.e.,operationfromRECstarttostop), thismodecompilesimagesfrommultiplerecording sessionsintoasingleclip.

Seite 48

48 Precautions for one-clip recording mode • Thismodewillnotfunctionwhentheinterval recording,one-shotrecording,looprecording,or VFRrecordingfunctionsareselected. • Thismodewillnotfunctionwhenthemenuoption RECSIGNAL issetto1394.

Seite 49

49 Shooting Adjusting the shutter speed Setting SHUTTER mode 1 Push DIAL SEL to select SHUTTER mode. 2 Push the SHTR/F .RA TE dial. • TheSHUTTERmodechangesON/OFF . • Theshutterspeedchangesbyturningthe SHTR/F .

Seite 50

50 Ifallmodesandspeedsareavailable,thedisplay changesinthefollowingorder: ■ When SYSTEM MODE is set to 1080-59.94i, 720-59.94P, 480-59.94i For 60i and 60P recording (1/15) (1/30) 1/60 1/100 1/250 S/S 1/120 1/500 1/1000 1/2000 For 30P recording (1/7.

Seite 51

51 Shooting Setting FRAME RA TE mode 1 Press DIAL SEL button to select FRAME RA TE function. WhenVFRisON,theframerateindicatoron theviewnde randLCDmonitoras hasshown inthediagrambelow ,indicatingthatyoucan altertheframerate.

Seite 52

52 Switching audio input INPUT1 switch (MIC POWER +48V) INPUT1 LINE/MIC switch INPUT2 LINE/MIC switch INPUT2 switch (MIC POWER +48V) AUDIO CH2 SELECT switch AUDIO CH1 SELECT switch AUDIO INPUT 1/2 terminal Using the built-in microphone 1 Switch the AUDIO CH1 SELECT switch to INT (L).

Seite 53

53 Shooting Using another microphone and audio equipment 1 Connect an external microphone or audio equipment to the AUDIO INPUT 1/2 (XLR, 3 pin) terminal. (Page 101) 2 Use the INPUT 1/2 switch to switch the audio input. LINE: (audioequipmentisconnected) Inputlevelis0dBu.

Seite 54

54 Adjusting the recording level AUDIO LEVEL knob (CH1, CH2) AUDIO AUTO/MANU CH1, CH2 switch Usethe AUDI OLEVEL knobtoadjustthe recording levelofthebuilt-inmicrophoneorofaudiosignals inputthroughthe AUDIOINPUT1/2(XLR,3pin) terminal.

Seite 55

55 Shooting (Only for AG-HPX250EN) T C 1 2 : 3 4 : 5 6 : 2 3 1 1 2 9 9 9 min P 2 F  U L L P - P A U S E 1 - C L I P U S E R - 1 1394 60 1080 i A VC-I 100 P 3 .2 K L T . B INT R INT L. : : C C H H 2 1 O X 0 dB / 1 6 N D 1 F B C -30 -18 -12 0 dB -6 2 1 3 4 5 1 Channel display Thisdisplaysthecurrentlymonitoredaudio channel.

Seite 56

56 Using scene les (Scene File Data) Changing scene le settings ■ Example 1: Change the name of the scene le. 1 T urn the scene le dial, then select the scene le to be changed. 2 Select the menu option NAME EDIT in the SCENE FILE screen, then press the Operation lever in the ▲ ▼ direction.

Seite 57

57 Shooting • PressingtheMENUbuttonxesthecurrent settingsandclosesNAMEEDIT . • V aluesthathavebeenxedaremaintained evenifthepowerisswitchedOFForthe dialischanged.

Seite 58

58 Using scene les (Scene File Data) (continued) Saving scene les and other settings on SD memory cards Y oucansaveuptofourscenelesettingsorother settingsaslesonanSDmemorycard,andyou canalsoloadthemfromthecard.

Seite 59

59 Shooting T o title a le 1 Performsteps1to5. 2 Setthelenamewith8charactersbyusing Operationlever .

Seite 60

60 Conguration of setup data les ThiscameramakesitpossibletosaveasceneletoeachoftheF1toF6positionsontheSCENEFILE dial.

Seite 61

61 Shooting Using time data Time data overview ■ Time code UsetheTCGswitchtoselectRecRunorFreeRun mode.(Page141) FREE RUN: Thetimecodeadvancesconstantlywhetherthe camera-recorderisonornotjustliketimeitself.

Seite 62

62 Using time data (continued) ■ Date (real time) • Thebuilt-inclockcalculatestheyear ,month,day andtimefromtheinternalclocktodisplayon videointheLCD,viewnderandVIDEOOUT andothervideooutput.

Seite 63

63 Shooting Entering the user bits Theuserbitsallowinformation,includingmemos thatuseuptoeight-digithexadecimalnumbers (dateandtime),toberecordedintheSubcode area.

Seite 64

64 Using time data (continued) Frame rate information recorded in user bits Theframeratevalueofvideodatacapturedand recordedataframeratesetinthemenu�.

Seite 65

65 Shooting 720P mode Frame rate: 24P over 60P (2:3)  Updatedframe 02 25 00 01 03 04 05 06 23 24 26 27 28 29 A A B B B C C C D D D D A A B B B C C D D D D D A A B B 01 10 10 10 01 00 10 10 01 00.

Seite 66

66 Using time data (continued) Setting the time code 1 Switch the menu option TC MODE and TCG on the RECORDING SETUP screen to set the mode of the time code.

Seite 67

67 Shooting Externally locking the time code Thetimecodegeneratorbuiltintoyour AG- HPX250P/ENmaybelockedtoanexternal generator .Itisalsopossibletolockanexternal timecodegeneratortotheinternalgenerator .

Seite 68

68 Using time data (continued) T o externally lock the time code Followthestepsbelow . 1 T urn the POWER/MODE switch to ON. 2 Set TCG on the setting menu RECORDING SETUP screen to FREE RUN.

Seite 69

69 Shooting GENLOCK and time code input/output connection and setup Camera-recorder operating conditions Camera- recorder setup GENLOCK input and camera-recorder output phase (In phase: √ Out of pha.

Seite 70

70 Using time data (continued) Outputting the time code externally T ooutputtimecodefromthecamera-recorder ’sTC OUTconnectortoaVTRorotherrecordingdevi.

Seite 71

71 Shooting Recording time codes and user bits When SYSTEM MODE is set to 1080-59.94i, 720-59.94P , 480-59.94i System setting status Recorded TC Output TC Displayed TC Recorded UB Output UB SYSTEM MOD.

Seite 72

72 Using time data (continued) System setting status Recorded TC Output TC Displayed TC Recorded UB Output UB SYSTEM MODE REC SIGNAL REC FORMA T CAMERA MODE FRAME RA TE L TC VITC TC OUT L TC and VITC .

Seite 73

73 Shooting When SYSTEM MODE is set to 1080-50i, 720-50P , 573-50i System setting status Recorded TC Output TC Displayed TC Recorded UB Output UB SYSTEM MODE REC SIGNAL REC FORMA T CAMERA MODE FRAME R.

Seite 74

74 Basic playback operations Lock release button Mode lamp (PB/THUMBNAIL) POWER/MODE switch 1 T urn the POWER/MODE switch to ON. Whileholdingdownthelockreleasebutton, turnthePOWER/MODEswitchtotheON position. 2 T urn the POWER/MODE to illuminate the PB/THUMBNAIL operation lamp.

Seite 75

75 Playback Thumbnail operations A clipisadatagroupthatincludestheimagesand voicescreatedfromoneshootingsession,together withadditionalinformationsuchastextmemosand metadata.

Seite 76

76 Thumbnail manipulations overview Thumbnailscreensareconguredasfollows: THUMBNAIL OPERA TION PROPERTY ALL CLIP DELETE CLIP PROPERTY SAME FORMA T CLIPS FORMA T SELECTED CLIPS REP AIR CLIP MARKED CLIPS RE-CONNECTION TEXT MEMO CLIPS COPY EXCH.

Seite 77

77 Playback Thumbnail screen ThethumbnailscreenisdisplayedontheLCD monitorwhenyouturnthePOWER/MODEswitch downwardandswitchtoPB/THUMBNAIL mode. T urnthePOWER/MODEswitchagaintoreturnto CAMERA mode.

Seite 78

78 2. Slot numbers and HDD status ThissectionindicatesonwhichP2cardthe pointedclipisrecorded.Thenumberofthe slotthatcontainstheappropriateP2cardis indicatedinyellow .

Seite 79

79 Playback Playing back clips 1 T urn the POWER/MODE switch to set to PB/ THUMBNAIL mode. ThethumbnailscreenappearsontheLCD monitor . 2 Push the Operation lever in the ◄ ► direction and position the pointer on the clip you wish to play back.

Seite 80

80 Switching the thumbnail display Thedisplaycanbeswitchedsothatonlythose clipsmatchingthespeciedconditionsare displayedinthethumbnailscreen. 1 T urn the POWER/MODE switch to set to PB/ THUMBNAIL mode.

Seite 81

81 Playback Display clip properties by selecting PROPERTY → CLIP PROPERTY on the thumbnail menu to conrm the position of the thumbnail (the number of frames from the top of the clip). Since thumbnails come generally from the top of the clip, [0] is displayed.

Seite 82

82 Shot mark A shotmarkcanbeaddedtoaclipthumbnailto distinguishthisclipfromtheothers. 1 T urn the POWER/MODE switch to set to PB/ THUMBNAIL mode. ThethumbnailscreenappearsontheLCD monitor .

Seite 83

83 Playback 4 With the pointer at the bottom, push the Operation lever in the ◄ ► direction and position it on the text memo number you wish to play back then push the Operation lever in the ▲ direction (► playback).

Seite 84

84 Using a text memo to break a clip and copy the necessary portion 1 Select a desired text memo in a clip by carrying out steps 1-3 for “Playing back a clip at the position where a text memo is recorded” (Page 83). 2 Move the pointer to the desired text memo, and then press the SET button on the Operation lever .

Seite 85

85 Playback Reconnection of incomplete clips Incompleteclipsmaybegeneratedwhenclips recordedon multipleP2car ds(connectedcl ips)are separatelycopiedtodifferentcards.Reconnection functiongeneratesoneclip(theoriginal,connected clip)fromincompleteclips.

Seite 86

86 Copying clips SelectedclipscanbecopiedtotheP2cardorSD memorycardinthedesiredslot. 1 T urn the POWER/MODE switch to set to PB/ THUMBNAIL mode. ThethumbnailscreenappearsontheLCD monitor .

Seite 87

87 Playback Setting of clip meta data Informationsuchasthenameofpersonwhoshot thevideo,thenameofthereporter ,theshooting location,oratextmemocanbereadfromtheSD memorycard,andcanberecordedasClipMeta Data.

Seite 88

88 Clip meta data items ClipMetaDataincludesthefollowingitems: Underlineditemscanbesetbyreadingthe metadatauploadleontheSDmemorycard. Otheritemsaresetautomaticallyduringshooting.

Seite 89

89 Playback *1:  TheUSERCLIPNAMErecordingmethodis selectable.Fordetails,referto“Selectingthe USERCLIPNAMErecordingmethod”(Page 90). *2:  AL TITUDE/LA TITUDE/LONGITUDEinSHOOT arenotautomaticallysetduringshootingwith thisunit.

Seite 90

90 *  TheCOUNTvalueisindicatedasafour-digit number . TheCOUNTvalueisincrementedeachtimea newclipiscapturedifclipmetadatahasbeen readinandTYPE2hasbeenselectedasthe recordingmethod.

Seite 91

91 Playback Example of recording (DVCPRO HD) a clip on one P2 card: Recording pause REC start Recordingduration= Approx.7min. Clip1 COUNTvalue =0001 Clip2 COUNTvalue =0002 5min.

Seite 92

92 Formatting SD memory cards SDmemorycardscanalsobeformattedfrom thethumbnailscreen.WithanSDmemorycard insertedintothecamera-recorder ,performthe followingoperation: 1 T urn the POWER/MODE switch to set to PB/ THUMBNAIL mode.

Seite 93

93 Playback DA T A DISPLA Y : Thetimedisplayeldoftheclipoffersachoice ofT imeCode(TC),UserBits(UB),Shooting T ime(TIME),ShootingDate(DA TE),Shooting T imeandDate(DA TETIME),clipname(CLIP  NAME)oruserclipname(USERCLIPNAME).

Seite 94

94 4. Clip Information Displaysdetailedinformationabouttheclip. CLIP NAME: Displayclipnames. ST ART TC: Thetimecodevalueatthestartofthe recording. ST ART UB: Theuserbitvalueatthestartof therecording.

Seite 95

95 Playback • Deleting only the respective items of LOCA TION (recording location data) in SHOOT is not possible. By setting AL TITUDE to empty , other LONGITUDE/ LA TITUDE items are collectively deleted. • The metadata for a clip with the incomplete clip indicator cannot be modied.

Seite 96

96 Contents of P2 card status display settings Fromthethumbnailmenu,selectPROPERTY → CARDST A TUS.Thefollowingscreenappears. When “REMAIN” is selected: 3 5 4 1 2 1. Write-protect Mark The mark appears if the P2 card is write- protected.

Seite 97

97 Playback When “USED” is selected: 3 5 4 1 2 1. Write-protect Mark The markappearsiftheP2cardiswrite- protected. 2. P2 Card Status (used memory capacity) TheusedmemorycapacityoftheP2cardis indicatedbyabargraphandapercentage gure.

Seite 98

98 SD memory card status display Thestatusdisplayenablesaconrmationofthe SDmemorycardformattedcondition,available memorycapacityetc. Fromthethumbnailmenu,selectPROPERTY → DEVICES→SDCARD.

Seite 99

99 Playback Useful playback functions V ariable speed search Thisfunctionenablesyoutochangetheplayback speedandsearchforspecicscenes. 1 Press the Operation lever in the ► direction (playback) during playback.

Seite 100

100 Clip skip 1 Press  (pause) during playback to set the unit to the pause mode. 2 Push the Operation lever in the  (rewind) or  (fast-forward) direction. STILL A DV PAUS E STILL A DV INDEX SELECT VAR . VO L + - P B . S TO P INDEX MULTI / P-IN-P REC A.

Seite 101

101 Editing Connecting external units Headphones 3.5-mm stereo mini jack • Soundisnolongerheardfromthespeakerwhentheheadphonesareconnected.

Seite 102

102 Connecting external units (continued) Personal computer (non-linear editing/le transfer) File transfer/nonlinear editing Personal Computer USB cable (optional) Mini-B • “Proceduresformakingconnectionstoapersonalcomputer”(Page109) • USB2.

Seite 103

103 Editing Digital video equipment (Dubbing) 1394 cable (optional) Other Digital video equipment 6-pin BNC cable (optional) Connect one of these cables to the terminal on the recorder .

Seite 104

104 TV/Monitor (playback/dubbing) BNC cable (optional) HDMI cable (optional) Video pin cable (optional) Audio pin cable (optional) White: CH1 (left channel) sound Red: CH2 (right channel) sound Connect one of these cables to the terminal on the television or monitor .

Seite 105

105 Editing Connections to the DVCPRO/DV connector Recording signals input to the DVCPRO/DV connector 1 Connect a 1394 cable (DV cable). • “Prec autions in1394 connect ions”( Page107 ) • Makesurethatthesignalformatofthe camera-recorderandtheconnecteddeviceis thesame.

Seite 106

106 Connections to the DVCPRO/DV connector (continued) Subcode area time codes and user bits • WheninputfromtheIEEE1394interfaceis selectedandthetimecodeissettofreerun,the subcodeareatimecodeinputfromtheDVCPRO/ DVterminalcanberecordedonP2card.

Seite 107

107 Editing • External devices cannot be controlled via 1394 connection when A VC-Intra format or DVCPRO HD native recording is selected. • Backup recording does not work in three of the special recording modes: Interval recording, One-shot recording and Loop recording.

Seite 108

108 • Observethefollowingprecautionswhen controllingaP2memorycardcamera-recorder usingPCapplicationsoftware(editingsoftware).  · Recordingcannotbeinsertedtoaportionwithin aclip.

Seite 109

109 Editing Nonlinear editing with P2 card (PC mode: USB device) A USB2.0connectiontoacomputerorother deviceallowsyoutouseP2cardsinthecamera- recorderasmassstorage. Procedures for making connections to a personal computer 1 Connect a USB cable to the USB 2.

Seite 110

110 • WhenaUSBconnectionispresentthePC operationlampilluminates,and“USBDEVICE CONNECT”appearsinthecenterofthe viewnderorLCDmonitor .Whenconnectionis notcorrectly ,“DISCONNECT”appearsinthe viewnder .

Seite 111

111 Editing Using a hard disk drive (PC mode: USB host) Inthismode,itispossibletoconnecttoaharddisk drive(HDD),storecarddata(EXPORT):Referto.

Seite 112

112 Using a hard disk drive (PC mode: USB host) (continued) Using the USB HOST mode Usable hard disk drives • HarddiskdrivesconnectableviaUSB2.

Seite 113

113 Editing 1. P ARTITION Thissectionindicatesthetypeoftheharddisk drive. Theavailablefunctionsdependonthetypeof harddiskdrive. HDD type Feature Available functions TYPES A specialformatthat allowshigh-speed writingandwritingback onacard-by-cardbasis.

Seite 114

114 Using a hard disk drive (PC mode: USB host) (continued) 1 1. VERIFY Thissectionindicatesthevericationsetting andresultsatthetimethedataonthepartition wasrecorded. ON:FINISHED : V ericationwasperformedandtheresults agreed.

Seite 115

115 Editing Writing data on a hard disk drive 1 Switch the mode to USB HOST . • “S wi tch in gt o the U SB HO ST m ode ” (Pa ge 1 1 1) • Thethumbnailscreenisdisplayed. (USBHOSTisdisplayedinthebottomright.

Seite 116

116 Using a hard disk drive (PC mode: USB host) (continued) Writing data back to P2 cards Selecting clips on the hard disk drive Y oucanselectclipsontheharddiskdrivetobe writtenbacktoP2cards. 1 Switch the mode to USB HOST .

Seite 117

117 Editing Direction for using a hard disk drive • A harddiskdrive(includingtheP2STORE(AJ- PCS060G))mustbeusedunderthefollowing conditions:  · Itmustmeettheoperatingrequirements(e.

Seite 118

118 Using a hard disk drive (PC mode: USB host) (continued) MISSING CLIP! A shotmarkwillbeaddedtotheclipsrecorded onmultipleP2cardswhenallP2cardsarenot insertedyet.

Seite 119

119 Editing LACK OF CAP ACITY! Notenoughspaceleftontheharddisk. Thereisnotenoughspaceontheconnected harddisk.Useanewharddiskorformatted harddisk. HDD DISCONNECTED! Theunitisnotconnectedtoaharddisk.

Seite 120

120 Screen displays Viewnder screen status displays Inadditiontovideo,theviewnderorLCDmonitor showsmessagesindicatingcamera-recorder settingsandoperatingstatus,centermarkers, safetyzonemarkers,zebrapatternsandother indications.

Seite 121

121 Displays Screen displays T C 1 2 : 3 4 : 5 6 : 2 3 1 1 2 9 9 9 min P 2 F U L L P - P A U S 1 - C L I P E U S E R - 1 1394 60 D 5 F B C 1080 i A VC-I 100 P 3 .2 K T . B O X 0 dB N D 1 8 3 % N D 1 S E P 2 5 2 0 1 1 2 S P O T F 5 . 6 3 : 5 9 : 4 5 m 9 m 1 Z 0 .

Seite 122

122 2 W arnings REMOTE: Flasheswhendevicesettingsofwireless remotecontrolaredifferent. P2 : BlinkswhennoP2cardisinsertedorthe cardiswriteprotected. P2 FULL: Blinkswhenthereisnomorespacelefton theP2card.

Seite 123

123 Displays 12 Audio level meter display (Only for AG-HPX250P) C H 1 -20dB 0dB C H 2 -12dB (Only for AG-HPX250EN) C H 1 -18dB 0dB C H 2 -12dB ByassigningMAG A.L VL (levelmeter magnication)toaUSERbuttonmakesit possibletoswitchtodisplaymagnication.

Seite 124

124 26 Image stabilization display ThisisdisplayedwhentheOISbuttonis pressedandimagestabilizationisactivated. 27 Scene le name display Indicatesthenameofcurrentlyselected SCENEFILE(F1toF6).

Seite 125

125 Displays 33 Recording and playback REC :  Recording P AUSE : Recordingstandby  : Playbackpause  : Play ( ) : Slowplay(Reverseslowplay) ( ) : Frame-by-frame(Reverse.

Seite 126

126 Errors and warnings Errorsandwarningsappearwhensomething goeswrongwiththecamera-recorderoraP2card malfunctions.

Seite 127

127 Displays TEMPORAR Y P AUSE IRREGULAR FRM SIG: Thismessageindicatesthattheinput GENLOCKreferencesignalisirregularand thatrecordinghasbeenpaused.

Seite 128

128 Screen displays (continued) SHUTTER 1/**** (OFF) Displayedwhentheshutterspeedischanged. SPOT LIGHT Displayedduringiriscontrolwhenbacklight statusischangedbypressingtheUSERbutton towhichSPOTLIGHT isassigned.

Seite 129

129 Displays No Displays Displays that MODE CHECK brings up √ Displays that DISPLA Y OFF clears √ Displays opened or hidden by settings in the OTHER DISPLA Y option – : Not affected, √ : Opens.

Seite 130

130 No Displays Displays that MODE CHECK brings up √ Displays that DISPLA Y OFF clears √ Displays opened or hidden by settings in the OTHER DISPLA Y option – : Not affected, √ : Opens, ×: Cle.

Seite 131

131 Displays MODE CHECK indication MODECHECKprovidesanalmostcompletesetofcamera-recorderinformation. Items1to3belowareprovidedonlybyMODECHECK.

Seite 132

132 Item Setting Notes LOAD/SA VE/INIT Loads,savesandinitializessettingsofthescenele assignedtothecurrentscenedialposition(oneF1–F6 scenele). LOAD: Loadsdatastoredincamera-recordermemory .

Seite 133

133 Menu Item Setting Notes DET AIL CORING Adjuststhelevelofnoisereductionofthedetailsignal. – 7 …0 *1 … +7 • Adjusttowards–foraclearerimage.Noiseincreases slightly . • Adjusttowards+forlessnoise.

Seite 134

134 Item Setting Notes KNEE Setsthecompressionlevel(kneepoint)ofthehigh brightnessvid eosignalsreceivedth roughtheMOSsensor toavoidoverexposure. AUTO: *1 Setsthelevelautomaticallyaccordingtothereceived signals.

Seite 135

135 Menu Item Setting Notes SYSTEM MODE Speciesthesignalformatusedbythiscamera-recorder . 1080-59.94i, 1080-50i, 720-59.94P , 720-50P , 480-59.

Seite 136

136 SYSTEM SETUP screen (continued) Item Setting Notes REC FORMA T (continued) ■ WhenSYSTEMMODEis720-59.94P A VC-I100/60P , A VC-I100/30PN, A VC-I100/24PN: Usesthe A VC-I100codecforrecording.Shootingand recordingat60P ,30PN(nativerecording)and24PN (nativerecording).

Seite 137

137 Menu SYSTEM SETUP screen (continued) Item Setting Notes ASPECT CONV Selectstheaspectratioforrecordingat480i,576i. SIDE CROP: Cropstherightandleftedgesoftheimage. LETTER BOX: Addsblackbandsatthetopandbottomoftheimage.

Seite 138

138 SW MODE screen Item Setting Notes LOW GAIN SetsthegainvalueassignedtotheLpositionoftheGAIN switch. 0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB • Fixedto0dBwhentheframe rateissetto4FRAMEorlower inVFRmode.

Seite 139

139 Menu SW MODE screen (continued) Item Setting Notes USER MAIN SetsthefunctionassignedtotheUSERMAINbutton. SPOTLIGHT , BACKLIGHT , A TW, A TWLOCK, S.GAIN, D.ZOOM, Y GET , DRS, TEXT MEMO, SLOT SEL, SHOT MARK, MAG A. L VL, L VL METER, PRE REC, WFM, LAST CLIP , FBC, LCD B.

Seite 140

140 AUTO SW screen Item Setting Notes A.IRIS ON: Performstheautoiriscontrolinautomode.TheIRIS buttonisdeactivated. OFF: Deactivatestheautoiriscontrolinautomode.This performstheiriscontrolselectedwiththeIRISbutton.

Seite 141

141 Menu Item Setting Notes REC FUNCTION Setsspecialrecordingmodes. NORMAL: Thespecialrecordingmodesarenotused. INTERV AL: Setsintervalrecording.

Seite 142

142 RECORDING SETUP screen (continued) Item Setting Notes TC PRESET Setstheinitialtimecode. • Settheframevalueto0ormultiplesof5whenshooting/ recordingissetto24P ,24P A,or24PN. Ifanyothervalue,therecordedtimecodewillmis- match.

Seite 143

143 Menu AUDIO SETUP screen Item Setting Notes LIMITER CH1 SetstheCH1limiter . ON, OFF • Whenthe AUDIO AUTO/MANU CH1switchissetto AUTO andautoadjustmentmodeis active,thelimiterisdisabled regardlessofthesesettings.

Seite 144

144 Item Setting Notes INT MIC Determineswhetherornotinputfromtheinternal microphoneisusedduringrecording. ON: Usesinternalmicrophoneinput.

Seite 145

145 Menu OUTPUT SEL screen Item Setting Notes SDI & HDMI SELECT SetsthetypeforthesignalformatoutputfromtheSDI OUTandHDMIOUT terminals. 1080i/720P: Follows1080i,720PsettingsofSYSTEMMODE.

Seite 146

146 Item Setting Notes TC OUT SetsthetimecodetypeoutputwhenTCIN/OUT connectorisconnectedasTCOUT . TCG: Outputsthetimecodegeneratorvalueofthecamera- recorderatalltimes.

Seite 147

147 Menu Item Setting Notes EVF PEAK LEVEL AdjuststhepeakingleveloftheviewnderandtheLCD monitor . – 7…0…+ 7 EVF PEAK FREQ Adjuststhepeakingfrequencyoftheviewnderandthe LCDmonitor .

Seite 148

148 Item Setting Notes SAFETY ZONE Setsthesafetyzonedisplayedintheviewnderandon theLCDmonitor . • HD(1080i,720P) 90% 4 : 3 2 : 1 14 : 9 1.85 : 1 2.35 : 1 2.39 : 1 : : : : : : : 90 % display at 16:9 100 % display at 14:9 (between 16:9 and 4:3 size) 100 % display at 1.

Seite 149

149 Menu Item Setting Notes ZOOM·FOCUS Selectstheunitofzoomandfocusvalues. OFF , NUMBER, mm/feet, mm/m <Note> Usethemm/feetormm/mdisplayonlyasageneral guidelinesinceitisnotentirelyaccurate.

Seite 150

150 CARD FUNCTIONS screen Item Setting Notes SCENE FILE Reads/writesscenelesfrom/ontotheSDmemorycard. FILE SELECT : Selectssceneles(1–4). READ: Readstheselectedscenele(1–4)settingsstoredon theSDmemorycard.

Seite 151

151 Menu OTHER FUNCTIONS screen Item Setting Notes USER FILE Savesuserlestocamera-recordermemory ,loadsthem intoc amera-reco rdermemo ryorin itializes them.(Pa ge60) LOAD, SA VE, INITIAL • ThisdoesnotaffectoptionsintheSCENEFILEscreen.

Seite 152

152 OTHER FUNCTIONS screen (continued) Item Setting Notes TIME ZONE AddstoordeductsfromGMTthetimevalueof-12:00to +13:00in30-minutesteps.(Asanexception,youcanset +12:45.)Refertothetablebelow .

Seite 153

153 Menu DIAGNOSTIC screen Item Setting Notes VERSION Indicatestheversionofthermwareusedinthiscamera- recorder . A subscreenprovidesdetailsonwhichrmwareversions areused.

Seite 154

154 OPTION MENU screen OpenthismenubyholdingdowntheDISP/MODECHKbuttonandwhenshootingstatusappearspress thefrontMENUbutton. • Usethisfunctiontocheckconnectionstatusduringnonlinearediting.

Seite 155

155 Reference Before calling for service Power supply There’snopower . • Makesurethebatteryand ACadaptorareconnected properly .Checktheconnectionsagain. ( Pa g e 2 1  of  V ol . 1 ) Powergoesoffassoon asitisturnedon.

Seite 156

156 Before calling for service (continued) Shooting Cannotshooteven thoughtheP2cardis insertedcorrectly . • MakesuretheP2card’swrite-protectswitchisnotinthe PROTECTposition. Recordingisnotpossibleifitisinthisposition.

Seite 157

157 Reference Playback Cannotplayevenwhen Ipresstheplaybutton. • IsthePB/THUMBNAIL lampon?IftheCAMERA lamp ison,pressthePOWER/MODEswitchsothatthePB/ THUMBNAIL lampturnson.

Seite 158

158 Updating the rmware incorporated into the unit Checking the current version of the rmware using the unit and performing the update Checkrmwareversionofthecamera-recorderintheDIAGNOSTICscreen.

Seite 159

159 Reference Cleaning When cleaning, do not use benzene or thinner . • Usingbenzineorpaintthinnersmaydeformthe camera-recorderand/orcausethesurfacenish topeeloff.

Seite 160

160 Storage precautions Beforestoringthecamera-recorder ,removethe battery . Storealloftheseitemsinaplacewithlowhumidity andrelativelyconstanttemperature.

Seite 161

161 Reference How to handle data recorded on P2 cards TheP2cardisasemiconductormemorycardthatisusedastherecordingmediumintheprofessional videoproductionandbroadcastingdevicesthatmakeuptheDVCPROP2Series.

Seite 162

162 Checkpoints for using memory cards <Cautions in using SD memory cards> • Use the unit by inserting an SD memory card that is compliant with the SD standard or the SDHC standard. • MMC (MultiMediaCards) cannot be used. (Bear in mind that taking pictures may no longer be possible if you do use them.

Panasonic AG-HPX250P Bedienungsanleitung

URL teilen

Ähnliche Anleitungen