Benutzeranleitung / Produktwartung 8010PF des Produzenten Palsonic
Zur Seite of 23
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 80CM CORDLE.
Congratulations on your purchase of this colour PURE FLAT Hi-Vision Palsonic television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future reference.
. . 80cm Pure Flat picture tube PAL/NTSC/SECAM Multi - System Hyperband CHINESE/ENGLISH on-screen menu display Surround sound and wide-field dynamic sound system NICAM Digital Stereo/bilingual broadca.
NOTES FOR OPERATION * Do not let the TV set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike.
Installation and appearance Antenna connection To ensure a bright - coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial.
Appearance Front view Back view 4 Note: Functions of MENU, AV, SYS, CH , VOL+/- are also provided to the remote controller. Antenna input MONITOR output terminals {VIDEO, AUDIO L/MONO, R} (1) Video 1 .
The Remote Controller 5.
Operation Switching on/off Push the main power switch on, if the set is in Standby mode, the power indicator is red; If there are pictures appearing on the screen, the indicator is yellow. If no picture appears on the screen, push the power button on the remote controller to turn the set on, the indicator turns to yellow.
1.3 Press the or button to enter into the sub-menu of Presetting the channels There are two ways to preset channels: to preset channels automatically and to preset channels manually. Below we will describe how to preset the channels by making use of the menu.
3. MANUAL SEARCH If AUTO-SEARCH cannot preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers - please make use of MANUAL SEARCH. Press the menu item select button or to select MANUAL SEARCH (the caption on the screen are red).
When you want to store and memorise another channel with another position, repeat steps 3.3, 3,4. After presetting the channels, you can skip unwanted program numbers to select your desired channels. Repeat steps 3.1 to 3.3 to select the unwanted program position of the unwanted channels .
6. The setting of colour and sound system Press the SYS button, the screen will display colour and sound system. If the displaying colour is abnormal, press the or button to select COLOUR, then press the or button to select the right colour system. Every time you press or button, the colour system will change in the sequence on the right.
FM mono sound two digital sound channels transmitting dual sound two digital sound channels transmitting dual sound one FM sound channel (The sound signal in FM channel is different from the one in NICAM channel. So when the NICAM is trans- mitting on the TV screen only displays an indicatior in yellow, while the active sound channel is FM).
Press the | button, you can quickly select two modes of picture and sound quality standard: One is standard mode ( on the screen displays (STANDARD); The other is personal select mode (on the screen displays "MEMORY"). 1. Picture adjustment Complete the following steps and you will adjust the picture quality.
2. Sound adjustment Complete the following steps and you will adjust the sound quality. Press the MENU button to display the main menu. Press the or button to select SOUND , then press the or button to enter into the sub-menu of SOUND.
3. SURROUND SOUND Making use of surround sound, you can enjoy the dynamic sound effect that is like being in a music hall. To make use of surround sound, complete steps 2.1, 2.2 to select SURROUND ON, and press the button to select SURROUND then press the or button to adjust its effect.
Press the or button to select OFF TIME. Pressing the or button set ONCE/EVERY OFF TIME. Every time you press the or button, it will change in the sequence of OFF EVERY ONCE OFF EVERY ------.
Pressing the button set the TV into standby mode. At the preset time the TV will automatically turn on to preset channel. To cancel ON TIME, set ON TIME OFF. 1.3 CLOCK The built-in clock employs the 24-hour system. Do step 1.1.1 to enter into the sub-menu of TIMER.
External Equipment Connections The following describes how to use and connect the TV with other equipment. Refer to the owner's manual of the other equipment to be connected as well. 1. To Connect to AV input You can video equipments such as a VTR and video camera to this TV and enjoy the high quality picture and sound.
To select the input press the VIDEO button on the TV set or the AV button on the remote controller repeatedly until you see the corresponding input indication on the screen. To return to aerial input, press the AV button until it displays programme number, or press direct channel select button or the CH button.
Troubleshooting Symptoms No power, red indicator is not lit up Poor colour, poor tint Spots appear on the screen Stripes appear on the screen Double images or "ghosts" Snowy picture The remo.
Specifications Power supply: Power consumption: Dimension(mm): Weight: CRT: TV system & channel range System PAL-D/K PAL-B/G PAL-I NTSC-M US SECAM-B/G SECAM-D/K VHF 1-12 2-12 2-12 2-13 2-12 1-12 A-6-A-l,A-W,AA-F’FF X ~ Z + 2, S1~S4 Colour system: Sound system : Sound output: Accessories : NICAM728: B/G 5.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-34F83-.
Ein wichtiger Punkt beim Kauf des Geräts Palsonic 8010PF (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Palsonic 8010PF noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Palsonic 8010PF - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Palsonic 8010PF reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Palsonic 8010PF erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Palsonic 8010PF besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Palsonic 8010PF verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Palsonic 8010PF. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Palsonic 8010PF gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
