Benutzeranleitung / Produktwartung 6850TGPF des Produzenten Palsonic
Zur Seite of 34
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 68CM C.
Congratulations on your purchase of this Palsonic colour television. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this equipment. Retain this manual in an easily accessible location for future reference.
1 Hyperband Automatic channel preset Full function remote control AV input/output (RCA) jacks DVD input (RCA) jacks Selectable picture and selectable sound Teletext ON Timer, OFF Timer Real Clock (wit.
2 When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. When cleaning dust off the picture tube disconnect the power first. You can wipe lightly with a piece of dry, clean and soft cloth.
3 Don't overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. Do not cover the ventilating hole in the cabinet Keep a space of more than 10cm from the walls to the TV set to ensure adequate ventilation.
Back Identification of Controls 4 Front Power Switch Indicator Remote Sensor CHANNEL DOWN VOLUME DOWN MENU CHANNEL UP VOLUME UP AV/TV AV/TV MENU CH- CH+ VOL- VOL+ AV2 input (VIDEO, AUDIO (L/MONO, R)) .
Retain on-screen display YELLOW (teletext) Remote controller Red (teletext), Enter into Hotel mode (Option button, in some model it can not act) Real clock (teletext) Power on/standby Reveal/conceal (.
Notes: 6 Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area. It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave conditions.
Install two "AAA" batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment. 7 Installing batteries Do not try to recharge batteries that are not intended to be recharged. Use only the size and type of batteries specified.
Using the side AUDIO/VIDEO Jacks 8 The optimal use for the side A/V jacks are to connect an A/V component that is used only occasionally, such as a camcorder or video game. Connect the Audio/Video output jacks of the external unit to the Audio Input jacks and the Video Input jacks.
Using the rear AUDIO/VIDEO input Jacks 9 You can connect video equipment such as a VTR and video camera to this TV and enjoy the high quality pictures and sound.
Using the AV Outputs 10 External equipment connections You can connect a stereo system to the AV output jacks on the TV set rear to enjoy a high-quality sound from the stereo system, or you can connect the AV output jacks to the VTR to record the program you like.
Turning on 1 11 1 2 0-9 digit buttons 2 Press the Power Switch on the TV set. Now the standby indicator lights up, the TV set is in STANDBY mode. Now please follow step 2. In STANDBY mode, press the button or 0-9 digit button on the remote controller and the TV set is turned on.
Watching AV program 12 1 This TV set provides AV and DVD input terminals for your convenient connection to VCR, DVD or other video equipment. To watch video program from AV inputs or DVD inputs, Press 0/AV button repeatedly until you see the appropriate input indicator on the screen.
Automatic Tuning 3 13 1 2 Program 1 48 MHz >> Automatic tuning * To exit the menu, press OK button. Press MENU repeatedly to display Program menu. Press CH+ or CH- to select Automatic tuning . Press VOL+ to start automatic tuning. All active channels will be preset and stored into memory automatically.
Manual tuning 3 14 1 2 4 5 * To exit the menu, press OK button. If automatic tuning can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of Manual tuning. Repeatedly press MENU to enter into Program menu.
Fine tuning Fine tuning is not necessary under normal conditions. However, in area of inferior broadcast conditions where adjustment is necessary for a better picture and sound, use Fine tuning. Select a channel you want to fine-tune (for example: channel 3).
Language Blue back Rotate Child lock Color system Sound system Special functions + - P+ P- English On 50 Off Auto B/G Setting Sound System Setting Colour System 3 16 1 2 1 2 * To exit the menu, press OK button.
Program delete 3 17 1 2 5 6 * To exit the menu, press OK button. After presetting the channels, you may delete unnecessary programs so that only the programs you want to watch are selected. Use digit buttons or channel up/down button to select a program you want to delete (for example: program 3 ).
Program name Program sort 18 * To exit the menu, press OK button. 3 1 2 If required, you can give a name to the programs. Note: If current program is Teletext, it can be automatically named by the unit according to its information. In Program menu, highlight Program 003 , press VOL+ button and a small block appears near 003.
Notes: Use on-screen display button ( ) to know the current channel number + 3 19 1 2 Use Direct Channel Select buttons To select one-digit channel: Press --/--- button to display "-", then input the number. To select two-digit channel: Press --/--- button to display "--", then input the number.
Picture quality Display normal pictures Display more brightness and contrast pictures Display mild pictures The picture quality you set To select the picture mode 3 20 1 2 * To exit the menu, press OK button. You can select the picture quality instantly among three preset modes and one user-set mode.
Press VOL+/- to adjust the level. Adjusting volume 3 21 1 2 2 1 Use VOL+ or VOL- button. Press VOL+ button, the volume increases; Press VOL- button, the volume decreases. Use MUTE button. If you want to mute the sound, press button on the remote. To resume the sound, press this button again.
Sound mode selection 22 * To exit the menu, press OK button. SM (sound mode select) ? + - + - + SOUND S.M P .M HOTEL LOCK --/ --- OK MENU 2 5 6 3 9 8 7 4 1 0 /A V + - VOL + VOL CH CH - i Enter into earphone state Sound controls You can select the sound quality instantly among three preset modes and one user-set mode.
Setting clock 3 23 1 2 * To exit the menu, press OK button. 2 Use digit buttons to input the current time for the set. If wrong in setting the time, press RED button to cancel and input again. Press MENU button repeatedly to display Timer menu. Press CH+/ - to select Clock.
To turn on the TV automatically (ON timer) 3 24 1 2 * To exit the menu, press OK button. 4 With the ON timer, the TV will automatically turn on to a preset channel at a preset time. In Timer menu, press CH- to select Timer on . Use Digit Buttons to set ON time.
To select OSD language 3 25 1 2 * To exit the menu, press OK button. There are multi OSD languages in this TV set provided for you to select (OSD: on-screen display): Press MENU repeatedly to display Special functions menu. Now the first menu item is highlighted and indicates the current selected OSD language.
Child lock setting 3 26 1 2 4 * Child lock is an optional function. Making use of child lock function, you can lock all the programs to prevent children from viewing them. Press LOCK button on the remote control, the Lock menu bar appears. (or press MENU repeatedly to display Special functions menu.
Hotel ------ Hotel *****- Hotel Off New ------ New ------ ? Hotel lock setting 3 27 1 2 1 Making use of hotel lock function, you can limit some functions so that other user can not change your settings. This function is especially useful in hotel. Press HOTEL button on the remote control, the screen will display "Hotel ------" .
Teletext 28 Teletext is an optional function, therefore only a set with the teletext system can receive the teletext broadcast. Switching Teletext on/off Press button once to switch on teletext. Press button twice both teletext and TV program are displayed.
Only some buttons have function while others can not act, and the volume is limited. 29 Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Power is not turned on Poor colour poor tint Be sure the power cord is plugged in.
30 Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results if not using cable. The most common types of television interference are shown below.
Specifications 31 Note : Design and specifications are subject to change without notice. CATV Power Supply: Power Consumption: Dimensions (mm): Weight (kg): CRT: AC 100-240V, 50Hz 180W 762 (W) x 580 (.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-TA29663-00 Ver.
Ein wichtiger Punkt beim Kauf des Geräts Palsonic 6850TGPF (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Palsonic 6850TGPF noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Palsonic 6850TGPF - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Palsonic 6850TGPF reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Palsonic 6850TGPF erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Palsonic 6850TGPF besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Palsonic 6850TGPF verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Palsonic 6850TGPF. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Palsonic 6850TGPF gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
