Benutzeranleitung / Produktwartung 6840TS des Produzenten Palsonic
Zur Seite of 30
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 68CM C.
Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference.
Contents Features ........................................................................................................................ Important Safety Cautions ......................................................................................
Features 1 USOC and Intellectualized I 2 C-bus control Five picture modes Two groups of Video/Audio input terminals One S-Video terminal One group of DVD (Y,Cr,Cb) input terminals Video/Audio output t.
2 Important Safety Cautions When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. When cleaning dust off the picture tube disconnect the power first.
Don't overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 3 This TV set can operate on a power of ~240V, 50Hz.
Identification of Controls 4 Front view 1. Power Switch 2. Remote sensor. 3. Indicator. 4. AV/TV button: Video input select. 5. MENU button: To enter into menu operation. 6. VOL- button: volume down adjust; menu item adjust. 7. VOL+ button: volume up adjust; menu item adjust.
5 1. Antenna input 2. AV output (VIDEO, AUDIO L, R) 3. DVD input (YCbC r , AUDIO L, R) 4. AV1 input (VIDEO, AUDIO L, R) 5. S-VIDEO input 6. AV2 input (VIDEO, AUDIO L, R) Back view Y C B R C (1) VIDEO .
Identification of Controls (continued) 6 Power on/standby Direct Channel select TV/VIDEO Input select Channel up/menu item select Volume down/menu item adjust To enter into music TV mode Scanning prog.
7 Notes: Open the battery cover. 1 Please install the batteries before using the remote control. Install two "AA" batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment. 2 Replace the battery cover.
Installation 8 Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used. The exact type and position of the antenna will depend upon your particular area. Turn off the power first, when you connect an outdoor antenna to the antenna input terminal.
9 Connecting the rear AV and DVD input terminals. This TV set provides 2 groups of AV input terminals (including 1 group of DVD and S-Video input terminals) for your convenient connection to VCR, DVD or other video equipment to enjoy the high quality picture.
VIDEO L R (2) 10 Connecting the side AV input terminals Connecting the AV output terminals W Y R Signal VIDEO EQUIPMENT W Y R To audio outputs To video output Y C B R C (1) VIDEO S-VIDEO AUDIO VIDEO A.
Menu Introduction 11 Operations Press the MENU button repeatedly to select the screen display as below. In menu operation, press CH+/- to select item, press VOL+/- to adjust selected item.
Turning On/Turning Off 12 Operations Press the MAIN POWER SWITCH to turn on the TV set. If no picture appears, then the TV set is in STANDBY mode. Press , CH+/- or 0-9 buttons (one digit only) on the remote control, then the TV set is turned on.
Presetting programs 13 Operations Firstly, use the Auto search function to preset all active channels in your area automatically. Then arrange the preset channels with the manual search and program edit functions. Press the MENU button to select PRESET menu.
Presetting programs (continued) 14 Operations When picture and sound's effect of a channel is poor (for example: one or two CATV channel's picture and sound are not standard), you can correct them by making use of Fine tuning.
Editing programs 15 Operations Classifying programs After presetting the channels, you can skip unnecessary position numbers so that only the channels you want are selected. Access the PRESET menu, then select PROGRAM item by CH+/- and set the desired channel number (from 0~199) by VOL+/- or Digit buttons.
Editing programs (continued) 16 Operations Press MENU button repeatedly to access the SW AP menu. Select PROGRAM item and select a channel number A by Digit buttons. Select EXCHANGE item and press Digit buttons to set another channel number B that you would like to exchange with the program number which is displayed in the PROGRAM item.
Selecting Channel/input signal 17 Operations Use Digit buttons To select one-digit channel To select two-digit channel To select three-digit channel Note: The maximum channel number is 199, the set does not act if the channel number you input is out of the range of 0~199.
Adjusting the picture/sound 18 Operations Using the PP button: You can press PP button to select the desired picture mode: MILD , STANDARD , NATURE , CUSTOM , COLORFUL . Using the PICTURE menu: Press MENU button or PIC button to access the PICTURE menu.
Clock Setting 19 Operations Press MENU button repeatedly to access the CLOCK menu. Select TIME item. Note: The ON-TIME and OFF-TIME can be set only after you finish setting the TIME item. Press VOL- button to set the hour (0~23). Press VOL+ button to set the minute (0~59).
Clock Setting 20 Operations Select CH-TIME item. Set the CH-TIME. Press VOL- to set Press VOL+ to set minute (0~59). Select PROGRAM item. Set the channel number by Digit or VOL+/- buttons. The TV set will switch to the preset channel when the CH-TIME elapses.
System Setting 21 Operations With the background function ON , when no signal is being received, a preset background and customer's logo will appear. Press VOL+/- buttons to select ON or OFF . Access the SYSTEM1 menu. Press CH+/- buttons to select BACKGROUND item.
Other functions introduction 22 Operations There is a built-in game (Falling cube) for you to play. Press GAME button to access game interface. On the screen, there are falling cubes.
Other function introduction 23 Operations Noise Reduction setting You can watch wide picture (such as 16:9) in V-ZOOM mode. Access the SYSTEM2 menu. Press CH+/- buttons to select ZOOM item. Press VOL+/- buttons to select ON to active the V-ZOOM mode. In the normal mode, it should be set to OFF .
Other functions introduction 24 Operations If you only want to listen to the music, you can press MUSIC button and the screen displays MUSIC TV . Five seconds later, the screen is blank while the sound is normal. Press any button on the remote control to exit MUSIC mode.
Troubleshooting Guide 25 Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Unevenness in colour in some parts of the screen. When the set is switched on, do not shift or move the set around.
Specifications 26 TV system & channel range Power Supply: Power Consumption: Dimensions (mm): Weight (kg): CRT: AC 240V, 50Hz 140W 774(W) x 596(H) x 513(D) 36 68cm System PAL-B/G VHF 2-12 UHF 21-6.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-TS29803-00 Ver 1.
Ein wichtiger Punkt beim Kauf des Geräts Palsonic 6840TS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Palsonic 6840TS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Palsonic 6840TS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Palsonic 6840TS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Palsonic 6840TS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Palsonic 6840TS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Palsonic 6840TS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Palsonic 6840TS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Palsonic 6840TS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
