Benutzeranleitung / Produktwartung 6825G des Produzenten Palsonic
Zur Seite of 31
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 68CM CORDLE.
Contents Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference.
Clock/Game/Calendar Intellectualized remote controller caller Hyperband 256 preset channels Full function remote control AV input & output terminals, DVD input terminals Automatic channel preset O.
Important Safety Cautions When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Do not expose the TV set to rain or excessive moisture.
! This TV set can operate on an AC power of 240V, 50HZ. You must not use a power supply of any other type. High voltage exists in this TV set. Do not remove the cover 5 Do not cover the ventilating hole in the cabinet Keep a space of more than 5cm from the walls to the TV set to ensure adequate ventilation.
1. TV/VIDEO input select. 2. Volume up; menu item adjust. 3. Volume down; menu item adjust. 4. To enter menu operation. 5. Channel up; menu item select.
Back 5 1. Antenna input. 2. DVD inputs (VIDEO: Y, C , C , AUDIO L/MONO, R). 3. AV 2 inputs (VIDEO, AUDIO L/MONO, R). 4. S-VIDEO input. 5. AV outputs (VIDEO, AUDIO L/MONO, R).
6 Identification of Controls (continued) Remote Controller Direct channel selector The switch of the remote controller caller Power on/standby TV/VIDEO input select Colour and sound system select Volu.
! Install two "AAA" batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment. Replace the battery cover. Notes: The battery life should be about one year under normal use. Do not try to recharge batteries not intended to be recharged.
Notes: It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave conditions. The aerial cable should not be bundled with the power cord and the like. 8 Installation ! INSTALL the unit in a room where direct light will not fall upon the screen.
Using AV Inputs This TV set provides 3 groups of AV input (including one group of DVD inputs) and 1 group of AV out puts for your convenient connection to VTR, DVD or video camera to enjoy the high quality picture. Please refer to the owner's manual of the equipment to be connected as well.
Using DVD inputs 10 Installation (continued) Using AV outputs.
Turning on/off 11 2 1 Turning off ! Press the Power Switch on the TV set. The TV set is in STANDBY and the Yellow indicator lights up. In STANDBY mode, press the button or 0-9 buttons on the remote controller and the TV set is turned on. In STANDBY mode, you can also press the VOL , CH or TV/AV button on the set to turn on.
2 1 Switching from AV to TV ! To watch video program from AV input, PressTV/AV button repeatedly until you see the appropriate input indicator on the screen Notes: In AV1 inputs, the S-VIDEO terminal is prior to the VIDEO1 terminals. When both S-video and video signal are input, the S- video signal is selected (the OSD is "S-VIDEO1").
Tuning in 13 2 1 Auto Search Press MENU button. Press VOL+ or VOL- button to select SEARCH icon. Press CH- button to disply the Serach menu. Press CH+ or CH- button to select AUTO MEMORY item.
2 1 To skip an unnecessary channel ! Press CH+ or CH- button to select POSITION item. Notes: You can use BAND selection to quicken search process if you know which band your desired progam locates in.
Calling the on-screen display Press CH+ or CH- button to select POSITION item. You can call the on-screen display by pressing the DSP button on the remote controlle. The first press of the DSP button display the current state (if in TV mode, the current channel number will display) and the next press display the clock time.
Using 0-9 direct channel selector There are 2 ways for you to select a two-digit channel number, for example, channel 19 as follows Channel Selection 16 1 2 1, 1 3 4 There are 3 ways for you to select an one-digit channel number, for example, channel 9 as follows.
Adjusting Picture 17 2 1 Setting blue background Press MENU button. Press VOL+ or VOL- button to select PICTURE icon. Press CH- button to disply the PICTURE menu. Enter the PICTURE menu according to the above steps 1-3. Press CHL+ or CH- button to select B.
Selecting sound mode ! Use VOL+ or VOL- button. Notes: Sound Control 18 Adjusting volume 1 2 S.M Press VOL+ button, the volume increases; Press VOL- button, the volume decreases. Use MUTE button. 2 If you want to mute the sound, press MUTE button on the remote.
Setting BALANCE Press MENU button. 19 Setting WOOFER 1 4, 2 2 Press VOL+ or VOL- buttons to select SETTING icon. 3 4 Press CH- button to display the SETTING menu. Press CH+ or CH- button to select WOOFER item. 2,5, 3 5 Press VOL+ or VOL- button to select ON or OFF.
Setting sleep timer Press MENU button. You can quickly set the sleep timer by using the SLP button on the remote controller. With every press of this button the sleep time changes as follows; Timer Setting 20 To enter the TIMER menu 1 1 Please enter the TIMER menu first.
Setting ON TIMER Press CH+ or CH- button to select OFF TIMER item. 21 Setting OFF TIMER 1 1,3 1,3,5 2 Press VOL+ or VOL- button to select ONCE or EVERY. 3 4 Press CH- button. Press VOL+ or VOL- button to set the OFF time, for example 22:00. 2,4 2,4,6 2 1 Press CH+ or CH- button to select ON TIMER item.
Setting the colour and sound system Press MENU button. If the picture colour or sound is abnormal, maybe the colour and sonund system setting is wrong. You can select a proper colour or sound system as follows; System Setting 22 To enter the Setting menu 1 1,3 Please enter the SETTING menu first.
Channel scanning Press EDIT button on the remote controller. 23 Channel Edit 1 2,4,6 2 Press CH+/- to select CHANNEL 1 item. 3 4 Press VOL+/- to select the first target channel. Press CH+/- to select CHANNEL 2 item. 3,5,7 Press SCAN button on the remote controller and the TV set begins program scanning.
Playing GOBANG game Press CH+ or CH- button to select BOX item. Press any one of F1, F2 or F3 buttons to start the game. Press F1 to transform the shape; F2 to accelerate falling down; F3 to move the boxes. When the boxes are placed fully in one row, this row will disappear and the score increases 1 point.
Press any button except , , or to exit calendar. Remote controller caller Press CH+ or CH- button to select CALENDAR item. This TV set provides RC (remote contrller) calling function, which wil help you to find the RC if you do not know where the RC is.
Playing SLOT game Press MENU button. Press F1 button to start the game. The 1-9 digit buttons on the remote controller match the 9 target boxes on the screen. Pressing any one of these buttons can hit the relevant box, The score will be counted according to the amount of the box hit within the stipulated time.
Remote controller does not work Unevenness in colour in some parts of the screen Remote controller plays music continually or makes "Beep" sound Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing.
! TV system & channel range Power Supply: Power Consumption: Dimensions(mm): Weight(kg): CRT: AC 240V, 50Hz 140W 670(W) x 688(H) x 510(D) 43 68cm System PAL-B/G VHF 2-12 UHF 21-69 CATV X~Z+2,S1~S4.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-K29183.
Ein wichtiger Punkt beim Kauf des Geräts Palsonic 6825G (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Palsonic 6825G noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Palsonic 6825G - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Palsonic 6825G reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Palsonic 6825G erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Palsonic 6825G besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Palsonic 6825G verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Palsonic 6825G. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Palsonic 6825G gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
